Beruflich Dokumente
Kultur Dokumente
Types
We design, develop and manufacture all kinds of sub-station and solar panel mounting structures :
Substation structures (Both Welded Type and Bolted Type)
1. Lattice type
2. Pipe type
3. Gantries
Solar Panel mounting structures (Both Welded Type and Bolted Type)
1. Designing and fabrication of Solar Mounting Structures
2. Hot dip galvanizing of Solar Mounting Structures.
3. Fabrication of solar trackers.
The Structure includes Gantries and Equipment Support Structures. This structure consist of a number of
columns and Girder beams, which depend on number of load-bearing design based on the equipment which will
be mounted on them.
Depending upon the site and client's requirement, the Gantry and Equipment support structures can be
manufactured.
Design Capabilities
Number of design engineers : 4
Designing platform : 2 D & 3 D designing softwares (Autocad, Solidworks)
Structures designed : 10 gantries; 128 substation equipment; 3 solar mounting structure
Fabrication Capabilities
Daily Production Capacity : 20 Metric Tonnes
No. of welding machines : 8 Mig + Tick welding machines
No. of cutting and press machines : 16 press machines, 4 cutting machines
Galvanizing Capabilities
Tank Size : 4000 mm x 900 mm x 1250 mm
No. of shifts : Double
Daily Production Capacity : 20 Metric Tonnes
Zinc Coating Thickness : 80-150 Microns (as per client requirements)
The following Indian Standard Codes, unless otherwise specified herein, shall be applicable
(i) IS:4759-1979 : Specification for Hot Dip Zinc Coatings on Structural Steel and other allied Products.
(ii) IS:2009-1979 : Specification for zinc
(iii) IS:2629-1966 Recommended Practice for Hot Dip Galvanizing of Iron and Steel
(iv) IS:6158-1971 Recommended Practice for safe-guarding against Embrittlement of Hot Dip Galvanized Iron &
Steel Product.
(v) IS:2623-1972 : Method of Testing Uniformity of Coating on Zinc Coated Articles.
(vi) IS:6745-1972 : Method for Determination of weight of Zinc Coating on Zinc coated iron and steel articles (with
amendment No. 1)
(vii) ASTMA-123 : Spec. for Zinc (Hot Galvanized) Coating on (1978) Products Fabricated from Rolled, Pressed and
RIDDHI SIDDHI OFFSET 98290 46695