Beruflich Dokumente
Kultur Dokumente
1
Page 2 of 2
____________________________________________________________________
Technical Data
______________________________________________________________________________________________________
Wire diameter (d) .3 mm ( 0.02 mm)
_____________________________________________________________________________________________________
Fibre length (L) 13.0 mm to 35mm (+2/-3 mm)
Torsion angle of the fibre < 30
______________________________________________________________________________________________________
Number of fibres per kg 5000
____________________________________________________________________________________________
Total fibre length per 10 kg 1800m
__________________________________________________________
Tensile strength of drawn wire 1100 N/mm
_________________________________________________________________________
Rod wire C4D or C7D according to EN 10016-2
_________________________________________________________________________
Application Details
______________________________________________________________________________________________________
Dispensing Chemrite Steel Fibre should be ideally added at the
batching plant; although in some cases this may not be
possible, then site addition can be done
______________________________________________________________________________________________________
Curing Standard curing practice must be followed.
______________________________________________________________________________________________________
Safety Chemrite Steel Fibre is non-hazardous & non toxic.
______________________________________________________________________________________________________