Beruflich Dokumente
Kultur Dokumente
at
Malaviya National Institute of Technology, Jaipur
in association with
1
Publication in Journals
[1] Singh, S., Khan, S., Khandelwal, R., Chugh, A., & Nagar, R. Performance of Sustainable
Concrete Containing Granite Cutting Waste. Journal of Cleaner Production. 2016; 119: 86-
98.
[2] Singh, S., Nagar, R., Agrawal, V., Rana, A., Tiwari, A. Sustainable Utilization of Granite
Cutting Waste in High Strength Concrete. Journal of Cleaner Production. 2016; 116: 223-
235.
[3] Singh, S., Nagar, R. and Agrawal, V. A review on Properties of Sustainable Concrete using
granite dust as replacement for river sand. Journal of Cleaner Production, 2016; 126: 74-87.
[4] Singh, S., Nagar, R. and Agrawal, V. Performance of granite cutting waste concrete under
adverse exposure conditions. Journal of Cleaner Production, 2016;127:172-182.
[5] Tiwari, A., Singh, S. and Nagar, R. Feasibility assessment for partial replacement of fine
aggregate to attain cleaner production perspective in concrete: A review. Journal of Cleaner
Production, 2016; 135:490-507.
[6] A Rana, P Kalla, LJ Csetenyi, Sustainable use of marble slurry in concrete, Journal of
Cleaner Production 2015; 94: 304-311.
[7] P Kalla, A Rana, YB Chad, A Misra, L Csetenyi, Durability studies on concrete containing
wollastonite, Journal of Cleaner Production 2015; 87: 726-734.
[8] A Rana, P Kalla, LJ Csetenyi, Recycling of dimension limestone industry waste in concrete,
International Journal of Mining, Reclamation and Environment 2016; 1-20.
[9] A Rana, P Kalla, HK Verma, JK Mohnot Recycling of dimensional stone waste in concrete:
A reviewJournal of Cleaner Production 2016; 135:312-331
[10] B. Prajwal, Arpit, DR Unune, H.S Mali, S.S Dhami, Ravindra Nagar. Design and
fabrication of a strain gauge type 3-axis milling tool dynamometer: Fabrication and Testing.
International Journal of Materials forming and Machining Process. 2016 (accepted)
[11] Shiv Ranjan Kumar, Amar Patnaik, I K Bhat. Analysis of polymerization shrinkage and
thermo-mechanical characterizations of resin-based dental composite reinforced with silane
modified nanosilica filler particle. Journal of Materials: Design and Applications 230 (2016)
492-503.
[12] Shiv Ranjan Kumar, Amar Patnaik, I K Bhat. Physical and thermo-mechanical
characterizations of resin-based dental composite reinforced with silane-modified
nanoalumina filler particle, Journal of Materials: Design and Applications 230 (2016) 504-
514.
2
[13] Shiv Ranjan Kumar, I K Bhat, Amar Patnaik. Novel dental composite material reinforced
with silane functionalized micro-sized Gypsum filler particles, Polymer Composites. 2015;
DOI: 10.1002/pc.23599.
[14] Shiv Ranjan Kumar, Amar Patnaik, I K Bhat. Optimum selection of nano and micro sized
filler for the best combination of physical, mechanical and wear properties of dental
composites, Journal of Materials: Design and Applications DOI:
10.1177/1464420716629825.
[15] Anoj Meena, Harlal Singh Mali, Amar Patnaik, Shiv Ranjan Kumar. (2016).Effect of
adding nanoalumina and marble dust powder on the physical, mechanical and thermo-
mechanical characterization of dental composite,, Polymer Composites DOI:
10.1002/pc.24131
[16] Shiv Ranjan Kumar, AmarPatnaik, I K Bhat. (2015). In vitro wear behavior of dental
composite filled with silane treated nanozirconia filler, Journal of Engineering Tribology
DOI: 10.1177/1350650116641329.
[17] Swati Gangwar, Amar Patnaik, I.K.Bhat. Tribological and Microstructure Behaviour of
Quicklime (CaO) filled Silicon Bronze Alloy for Bearing Material, Silicon. 2015; DOI
10.1007/s12633-015-9352-1.
[18] Swati Gangwar, Amar Patnaik, I.K.Bhat. Tribological and Thermo-mechanical analysis
of CaO (Quicklime) particulates filled ZA-27 Alloy Composites for Bearing Application,
Journal of Materials: Design and Applications. 2015; DOI: 10.1177/1464420715609196.
[19] Swati Gangwar, Amar Patnaik, I.K.Bhat. Tribological and Microstructure Examination of
Environmental Waste (Marble Dust) filled Silicon Bronze Alloy for Wear Resistant
Applications, Silicon. 2015; DOI: 10.1007/s12633-015- 9401-9.
[20] Vikash Gautam, Amar Patanaik, I. K. Bhat Thermo-Mechanical and Fracture
Characterization of Uncoated, Single and Multilayer (SiN/CrN) Coating on Granite Powder
Filled Metal Alloy Composites. Silicon. 2016 8:133143.
[21] Vikash Gautam, Amar Patanaik, I. K. Bhat. Microstructure and Wear Behaviours of
Single layer (CrN) and Multilayered (SiN/CrN) Coating on Particulate Filled Aluminum
Alloy Composites. Silicon. 2015; DOI: 10.1007/s12633-015-9357-9 (inpress).
[22] M. J. Pawar, Amar Patnaik, Ravindra Nagar. Experimental investigation and numerical
simulation of granite powder filled polymer composites for wind turbine blade: A
comparative analysis, Polymer Composites. 2015; DOI 10.1002/pc.23700 (inpress).
3
[23] M. J. Pawar, Amar Patnaik, Ravindra Nagar. Investigation on Mechanical and Thermo-
Mechanical Properties of Granite Powder Filled Treated Jute Fiber Reinforced Epoxy
Composite, Polymer Composites. 2015; DOI 10.1002/pc.23633 (inpress).
[24] M. J. Pawar, Amar Patnaik, Ravindra Nagar. Numerical Simulation and Experimental
Validation of Granite Powder Filled Jute Epoxy Composite for Slurry Jet Erosive Wear.
International Polymer Processing. 2016; 31: 37-50.
[25] Shiv Ranjan Kumar, Amar Patnaik, I K Bhat. (2015). Analysis of polymerization
shrinkage and thermo-mechanical characterizations of resin-based dental composite
reinforced with silane modified nanosilica filler particle. Journal of Materials: Design and
Applications DOI: 10.1177/1464420715581003. I.F = 0.746
[26] Shiv Ranjan Kumar, Amar Patnaik, I K Bhat. (2015). Physical and thermo-mechanical
characterizations of resin-based dental composite reinforced with silane-modified
nanoalumina filler particle, Journal of Materials: Design and Applications DOI:
10.1177/1464420715581004. I.F = 0.746.
[27] Shiv Ranjan Kumar, Amar Patnaik, I K Bhat. (2015). Novel dental composite material
reinforced with silane functionalized micro-sized Gypsum filler particles, Polymer
Composites .DOI: 10.1002/pc.23599. I.F = 1.455.
[28] M. J. Pawar, Amar Patnaik, Ravindra Nagar. (2015). Investigation on mechanical and
thermo-mechanical properties of granite powder filled treated jute fiber reinforced epoxy
composite. Polymer Composites DOI: 10.1002/pc.23633. I.F = 1.455.
[29] Vikash Gautam, Amar Patnaik, I K Bhat. (2015). Thermo-mechanical and Fracture
characterization of uncoated, single and multilayer (SiN/CrN) coating on granite powder
filled metal alloy composites, Silicon, DOI: 10.1007/s12633-015-9318-3. IF = 1.069
Book Chapter
[1] K. Bhat, Amar Patnaik, Shiv Ranjan Kumar. 2015. Investigation of wear characteristics of
dental composite reinforced with rice husk derived nanosilica filler Particles, Volume7,
4
Nanocomposite: Fundamental and Science, Handbook of composite from renewable
materials and agricultural sources" being published by prestigious Wiley Scrivener,
publisher USA (accepted).
[2] Swati Gangwar, Amar Patnaik, I. K. Bhat. 2015. Effect of Fabrication and Characterization
of Quicklime (CaO) filled ZA-27 Metal Alloy Composites for Single Row Deep Groove
Ball Bearing, Wiley Scrivener publisher (accepted).
Papers communicated to journals
[1] B. Prajwal, Rohit Chaudhary, H.S Mali. Abrasion resistance of some Rajasthan marble
stones subjected to varying loads and sliding speeds according to EN: 14157 Standards.
Journal of Engineering Technology and Research.
[2] B. Prajwal, Rohit Chaudhary, H.S Mali. Abrasion wear characterization of some Rajasthan
marble stones subjected to foot traffic and correlation between abrasion and mechanical
properties. Journal of the Australian Ceramic Society.
[3] Shiv Ranjan Kumar, Amar Patnaik, I K Bhat. The in viro wear behavior of light cured dental
composites reinforced with silane treated nanosilica filler, Journal of Material Engineering
and Performances.
Conference publications
[1] Singh, S.Tiwari, A., Nagar, R., Agrawal, V., (2015). Feasibility as a potential substitute for
natural sand: A comparative study between granite cutting waste and marble
slurry. Proceedins of 5th IconSWM-2015: P ;543-552
[2] Singh, S., Nagar, R., Agrawal, V., Rana, A.,.(2015). Utilization of Granite Cutting Waste in
Concrete as Partial replacement of Sand. UKERI-2015;P 2496-2504
[3] B. Prajwal, HS Mali, Rohit, Ankit, Manish Sandeep. Study & analysis of various marble
cutters used in stone and marble Industry of Rajasthan, published in International
Conference on Precision, Meso, Micro and Nono Engineering (Copen-9), 2015.
[4] B. Prajwal, HS Mali, Ravindra Nagar. Sustainability study and energy audit of marble
industry of Rajasthan, has been Communicated to All India Manufacturing Technology
Design and Research (AIMTDR), 2016.
[5] Shiv Ranjan Kumar, I.K. Bhat, Amar Patnaik. Evaluation of Mechanical Properties of resin
based dental composite materials reinforced with silane treated nano- size Al2O3 filler
particles. NIT-MTMI International conference on Emerging Paradigms and Practices in
Global Technology, Management & Business Issues, NIT Hamirpur, 22-24th Dec., 2014.
5
[6] Shiv Ranjan Kumar, Amar Patnaik I.K. Bhat Water Sorption and Solubility Behaviour of
Dental Composites Reinforced with Nanotitania Filler. International Conference on
Emerging and Futuristic Trends in Engineering & Technology at Maharja Agrasen Institute
of Technology, Solal, Baddi (HP), May 8-9, 2015
[7] Vikash Gautam, Amar Patnaik, I.K.Bhat, Parametric studies of slurry erosion wear of
hydraulic turbine blades using Taguchi technique. NIT-MTMI International conference on
Emerging Paradigms and Practices in Global Technology, Management & Business Issues,
NIT Hamirpur, 22-24th Dec., 2014.
[8] Vikash Gautam, Amar Patnaik, I. K. Bhat, Slurry Erosion Performance of Multilayer Coated
1050 Aluminum Alloy Composites. International Conference on Emerging and Futuristic
Trends in Engineering & Technology at Maharja Agrasen Institute of Technology, Solal,
Baddi (HP), May 8-9, 2015.
[9] Swati Gangwar, Amar Patnaik, I.K.Bhat, A review paper on physical and mechanical
properties of metal alloy composites for different applications, 1stInternational conference
on innovative advancement in engineering & technology, March 7-8, 2014, Jaipur National
University Jaipur, India.
[10] Swati Gangwar, Amar Patnaik, I.K.Bhat, Physical , mechanical and tribological
properties of particulate filled metal alloy composites for bearing applications: A Review,
International conference on Newest drifts in mechanical engineering, December 20-21 2014,
Department of mechanical engineering, Maharishi Markandeshwar University , Mullana,
Ambala, Haryana-133207.
[11] Swati Gangwar, Amar Patnaik, I.K.Bhat, Wear performance of Marble Dust filled ZA-27
alloy composites for single row deep groove ball bearing in wind turbine gear box,
International conference on Emerging Paradigms and Practices in Global Technology,
Management and Business Issues, December 22-24,2014 ,NIT Hamirpur, Himachal
Pradesh-177005,India
[12] Swati Gangwar, Amar Patnaik, I.K.Bhat, Fracture behavior for Marble Dust filled Copper
alloy composite for Single Row Deep Groove Ball bearing in Wind Turbine Gear Box,
National Conference on Futuristic Approaches in Civil & Mechanical Engineering
(FACME-2015) March, 24th 25th 2015, Maharishi Arvind Institute of Engineering and
Technology Jaipur, Rajasthan-302020, India.
[13] Swati Gangwar, Amar Patnaik, I.K.Bhat, Mechanical and Fracture analysis for Calcium
Oxide filled ZA-27 Metal Alloy Composites for Single Row Deep Groove Ball Bearing,
6
International conference on Emerging and Futuristic trends in Engineering & Technology,8-
9 May 2015, Maharaja Agrasen University, Solan, HP.
[14] Swati Gangwar, Amar Patnaik, I.K.Bhat, Surface Wear Behavior of Marble Dust (Stone
waste) Filled ZA-27 Alloy Composites for Bearing Material, International Conference
(ICMFA-2015), IIT BHU, Oct.27 29, 2015.
[15] M. J. Pawar, Amar Patnaik, Ravindra Nagar Investigation on Mechanical Properties of
Granite Dust Filled Glass Epoxy Composite for Wind Turbine Blade. International
Conference on Emerging and Futuristic Trends in Engineering & Technology at Maharja
Agrasen Institute of Technology, Solal, Baddi (HP), May 8-9, 2015
[16] M. J. Pawar, Ravindra Nagar, Amar Patnaik. Parametric Optimizations for Wind Turbine
Blade Applications: A Statistical Analysis. NIT-MTMI International Conference on
Emerging Paradigms and Practices in Global Technology, Management & Business Issues.
NIT Hamirpur, December 22-24, 2014.
Patents Filed
Patent
Sl
Title of Patent Inventors Application Status
No
Number
1 Fabrication of polymeric dental Shiv Ranjan Kumar Application
composites by adding new filler Dr. Amar Patnaik 1321/DEL/2015 awaiting
Gypsum Prof. I.K. Bhat examination
2 Erosion wear resistant polymer M. J. Pawar Application
composite laminate filled with Dr. Amar Patnaik 1322/DEL/2015 awaiting
granite powder waste Prof. Ravindra Nagar examination
3 Granite powder reinforced Vikash Gautam Application
hydraulic turbine blades Dr. Amar Patnaik 1320/DEL/2015 awaiting
Prof. I.K. Bhat examination
4 Marble dust reinforced copper Swati Gangwar Application
alloy composite fabrication Dr. Amar Patnaik 1319/DEL/2015 awaiting
Prof. I.K. Bhat examination
5 Prof. I.K. Bhat,
Development and
Dr. Amar Patnaik, Filed
characterization of self healing 201611002648
Mr. Shiv Ranjan
and antibacterial dental material
Kumar
7
6
Slurry erosion wear assessment
of marble dust powder Prof. I.K. Bhat,
reinforced aluminum alloy Dr. Amar Patnaik, 201611002651 Filed
composites hydraulic turbine Mr. Vikash Gautam
blade
8
2. Vikas Gautam 2016 Tribo-Performance of Multilayer Dr. Amar Patnaik
(Awarded) Surface Coating On Granite Dust Prof. I.K.Bhat
Filled Metal Alloy Composites
3. Swati Gangwar 2016 An Investigation of Mechanical, Dr. Amar Patnaik
(Submitted on (Submitted) Thermal and Wear Properties of Prof. I.K.Bhat
April 2016) Marble Dust/Calcium Oxide filled
Metal Alloy Composites for Ball
Bearing
4. Manoj Pawar 2016 Experimental Studies on Dr. Amar Patnaik
Submitting on (Awarded) Mechanical, Thermal and Erosive Prof. R. Nagar
21/07/2016 Wear Characteristics of Granite
Powder Filled Fiber Reinforced
Polymer Composites for Wind
Turbine Blade
5. Sarabjeet Singh 2016 Strength and Durability Studies on Prof. Ravindra Nagar
Submitting on (Awarded) Concrete Containing Granite Cutting Dr. Vinay Agarwal
21/07/2016 Waste as Partial Replacement of
Sand
S. Faculty
Title of Project Research Scholars
No. Supervisors
Sustainable reuse of Kota Stone Waste Aditya Rana
1. Dr. Pawan Kalla
in Concrete.
Study of Morphology and Physical,
Mechanical & Thermal Properties of
Dr. H. S. Mali
2. Various Stones with a view to Bhargav Prajwal Pathri
Prof. Ravindra Nagar
Optimise their Cutting & Machining
Parameters
9
Dr. Pawan Kalla Assistant Professor
2 Coordinator
Department of Civil Engineering
Dr. H. S. Mali Assistant Professor
3 Coordinator
Department of Mechanical Engineering
Dr. Amar Patnaik Assistant Professor
4 Coordinator
Department of Mechanical Engineering
*****
10