Beruflich Dokumente
Kultur Dokumente
1
Issue A
Description
The Model B, D & E Wet Alarm Valves are designed for use in Wet Pipe Sprinkler Installations in buildings not subject
to freezing temperatures. A variety of trim packages are available to suit the requirements of various approval
authorities and a number of accessories can be supplied. Wet Alarm Valve Stations normally comprise of Alarm
Valve, Trim, Gauges and Main Stop Valve. These assemblies are hydrostatically tested to18 Bar prior to despatch.
Accessories include Straps and Padlocks, Pressure Switches, Retard Chamber and Water Motor Alarm Gong.
Pressure rating
Max. Working Pressure 12 Bar
Dimensions
Model number Connections Pipe Size (mm) Face / Face (mm) Weight (Kg)
B Flange / Flange DN 80 273.0 23.6
B Flange / Flange DN 100 225.4 25.0
B Flange / Flange DN 150 263.5 34.1
B Flange / Flange DN 200 298.4 56.8
D Flange / Grooved DN 100 263.5 22.7
D Flange / Grooved DN 150 287.3 29.5
D Flange / Grooved DN 200 335.0 56.8
E Grooved / Grooved DN 100 285.7 19.1
E Grooved / Grooved DN 150 285.7 22.7
Notes
1. Flat Faced Flange, drilled PN16. Other flange types available on special order.
2. DN150mm groove available in both 165mm and 168mm.
3. Supply pressure gauge not shown. This is mounted below the supply stop valve.
4. The PN16 drilling on the top flange of the DN200 size valve is radially off set to the drilling in the bottom
flange. This is required to achieve bolt clearance of the body casting and must be taken into consideration in the
design of mating flanged pipe work.
US
Rapidrop Global LISTED
2009 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com
Data Sheet 5.2
Issue B
Operation
When a sprinkler head operates or the inspectors test valve is opened, pressure on the system side of the clapper
is reduced below the pressure on the supply side. The clapper then lifts off the grooved seat and permits water flow
from the supply to enter the system for distribution on the fire. Water now also flows through the uncovered groove
to the alarm device via the optional retard chamber where fitted. A pressure surge or water hammer in the supply
line will increase the pressure on the supply side of the clapper, causing it to lift intermittently which may result in a
false alarm. The model B alarm valve will prevent such false alarms by two features:
a) The external by pass with check valve allows a pressure surge from the supply to by pass the alarm
valve clapper. This will create an excess system pressure and thus steady the clapper.
b) Should a heavy surge unseat the clapper and allow water to flow into the alarm line, the optional
model E retard chamber then comes into action. This unit has specially designed inlet and drain
orifices which will allow the chamber to partially drain before filling and activating the alarm device.
The retard chamber also has a strainer in the intake line to prevent foreign matter from clogging the
intake orifice.
Care must be taken when installing the 20mm check valve in the by pass line to be certain that it is located with
the arrow on the body pointing towards the alarm valve.
Maintenance
The model B alarm valve is so constructed that there is nothing to adjust under normal water and operating conditions
and requires very little maintenance. The system pressure gauge should read equal too or higher than the supply
pressure gauge. Alarm valves should be regularly examined to ensure reliability. Inspection of the valve should be
as follows:
a) Notify the Fire Service, Insurance Provider and other centres requiring notification prior to commencing
inspection.
b) Remove any padlocks and straps.
c) Close supply stop valve and open main drain valve (item 34, Fig 1).
d) Remove front cover (item 3, Fig 2)
e) Remove the two clapper pin plugs and hinge pin (items 7 & 9 Fig 3) and clapper assembly (Fig 4)
f) Clean thoroughly removing any accumulated deposits. Inspect the valve rubber/clapper facing; if
worn or damaged replace with genuine replacement parts.
g) Inspect the clapper seat ring for lodgement of dirt, bruising or scoring. Clean thoroughly. (A damaged
seat ring can be carefully dressed using lapping compound. If the damage is extensive then a
complete new valve should be fitted.)
h) Reinstall clapper, hinge pin and front cover.
i) Remove swing clapper from 20mm check valve (item 19, Fig 1) on by pass line, and check condition
of clapper and seat. Replace complete unit if damaged.
j) When every part is reinstalled close main drain valve and reset valve as per Procedures after a fire.
Continued Overleaf
Page 1 of 5
Rapidrop Global
2011 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited
Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com
Data Sheet 5.2
Issue B
Page 2 of 5
Rapidrop Global
2011 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited
Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com
Data Sheet 5.2
Issue B
11
3
12
13
15
4 14
16
17 18 19 20
5
21
6
22
36
35 23
30 29 28 27 26 25 24
34 33 32 31
1 Bailey & Mackey Ps1381 Pressure N/A N/A 19 3/4" Check Valve Screwed Bronze
Switch (Optional)
20 3/4" Barrel Nipple Galv BS1387
2 1/2" Elbow Galv BS143
21 3/4" Elbow Galv BS143
3 1/2" Barrel Nipple Galv BS1387
22 3/4" X 3.1/2" Long Tube Sbe Galv BS1387
4 1/2" X 5" Long Tube Sbe Galv BS1387
23 3/4" Elbow Galv BS143
5 1/2" Elbow Galv BS143
24 3/4" Union Galv BS143
6 1/2" Barrel Nipple Galv BS1387
25 3/4" X 4" Long Tube Sbe Galv BS1387
7 3/4" X 1/2" Reducing Socket Galv BS143
26 3/4" Elbow Galv BS143
8 1/2" Barrel Nipple Galv BS1387
27 3/4" X 2.1/2" Long Tube Sbe Galv BS1387
9 1/2" 1/4 Turn Ball Valve
28 1/2" Barrel Nipple Galv BS1387
10 1/2" Barrel Nipple Galv BS1387
29 1/2" Elbow Galv BS143
11 1/2" Equal Tee Galv BS143
30 Pressure Gauge Incl No-Los Con- N/A BSEN837
12 1/2" X 6" Long Tube Sbe Galv BS1387 nector
13 1/2" Equal Tee Galv BS143 31 2" X 2.1/2" Long Tube Sbe Galv BS1387
14 1/2" Drip Valve Bronze 32 2" X 1/2" X 2" Tee Galv BS143
15 Wet Alarm Valve Body 33 2" X 2.1/2" Long Tube Sbe Galv BS1387
16 3/4" X 2" Long Tube Sbe Galv BS1387 34 2" Angle Drain Valve Bronze
17 3/4" X1/2" X 3/4" Tee Galv BS143 35 1/2" Barrel Nipple Galv BS1387
18 3/4" Barrel Nipple Galv BS1387 36 1/2" 1/4 Turn Ball Valve
Continued Overleaf
Page 3 of 5
Rapidrop Global
2009 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com
Data Sheet 5.2
Issue B
14 16
19
13 19
20
15
11
12
15
19 8
15
21
17 15
18
19 6
10 12
1
8
4 2 5 6
3
12
7 2 angle valve 1
14 Ball Valve 1
20 Check valve 1
21 1
Page 4 of 5
Rapidrop Global
2009 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com
Data Sheet 5.2
Issue B
Figure 2
Figure 3 Figure 4
Page 5 of 5
Rapidrop Global
2011 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com
Data Sheet 5.3
Issue B
Operation
When a sprinkler head operates, pressure on the system side of the clapper is reduced below the pressure on the
supply side. The clapper then lifts off the grooved seat and permits water flow from the supply to enter the system
for distribution on the fire. Water now also flows through the uncovered groove to the alarm device via the optional
retard chamber where fitted. A pressure surge or water hammer in the supply line will increase the pressure on the
supply side of the clapper, causing it to lift intermittently which may result in a false alarm. The wet alarm valve
will prevent such false alarms by two features:
a) The external by pass with check valve allows a pressure surge from the supply to by pass the alarm
valve clapper. This will create an excess system pressure and thus steady the clapper.
b) Should a heavy surge unseat the clapper and allow water to flow into the alarm line, the optional
model E retard chamber then comes into action. This unit has specially designed inlet and drain
orifices which will allow the chamber to partially drain before filling and activating the alarm device.
The retard chamber also has a strainer in the intake line to prevent foreign matter from clogging the
intake orifice.
Care must be taken when installing check valves in the trim to be certain that they are located with the arrow on
the body pointing in the right direction. The arrow on the body of the 20mm check valve in the by pass line must
point towards the alarm valve. The arrow on the body of the 15mm check valve in the drain line from the retard
chamber must point towards the main drain.
Maintenance
The wet alarm valve is constructed so that there is nothing to adjust under normal water and operating conditions
and requires very little maintenance. The system pressure gauge should read equal too or higher than the supply
pressure gauge. Alarm valves should be regularly examined to ensure reliability. Inspection of the valve should be
as follows:
a) Notify the Fire Service, Insurance Provider and other centres requiring notification prior to commencing
inspection.
b) Remove any padlocks and straps.
c) Close supply stop valve and open main drain valve.
d) Remove front cover (item 3, Fig 2).
e) Remove the two clapper pin plugs and hinge pin (item 7 & 9, Fig 3) and clapper assembly (Fig 4).
f) Clean thoroughly removing any accumulated deposits. Inspect the valve rubber/clapper facing; if
worn or damaged replace with genuine replacement parts.
g) Inspect the clapper seat ring for lodgement of dirt, bruising or scoring. Clean thoroughly. (A damaged
seat ring can be carefully dressed using lapping compound. If the damage is extensive then a
complete new valve should be fitted.)
h) Reinstall clapper, hinge pin and front cover.
i) Remove swing clapper from 20mm check valve on by pass line, and check condition of clapper and
seat. Replace complete unit if damaged.
j) When every part is reinstalled close main drain valve and reset valve as per Procedures after a fire.
Continued Overleaf
Page 1 of 5
Rapidrop Global
2009 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark. US
Rapidrop Global Limited Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com LISTED
Data Sheet 5.3
Issue B
Page 2 of 5
Rapidrop Global
2009 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark. US
Rapidrop Limited Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com LISTED
Data Sheet 5.3
Issue B
11
3
14
23
10 10
8 9 16
11
24 10
12
4
3 22 21
2 4
5
21
7
6
23
2
25
1 25
2
21 17
19 19 18
20
20
17
18
8 23 4
3
20
8 4
23
13 5
2 3
16
15 5
18
12
6
22
13 7
6
16
21
6 11 10
13 19
24
17
13 16 14
Figure 2
Figure 3 Figure 4
Page 5 of 5
Rapidrop Global
2009 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark. US
Rapidrop Global Limited Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com LISTED
Data Sheet 5.4
Issue A
Parts List
Item Description Item Description
1 Pelton wheel housing 11 Gong
2 Pelton wheel 12 Brass bushing
3 Bearing 13 Bracket
4 Cover, pelton wheel housing 14 Bolt
5 Clean out plug 15 Striker shaft
6 Cover screw 16 Striker bracket screw
7 Cover gasket 17 Striker bracket
8 Drive shaft (Length 455mm) 18 Striker
9 Drive shaft housing 19 Striker washer
10 Spacer 20 Shoulder rivet
Description
The Model E Water Motor Alarm Gong is a self contained, water operated alarm which sounds continuously whenever
the sprinkler system is activated. Designed with functional simplicity and sound engineering practice, the Model E
Water Motor Alarm Gong is always ready to function in the event of a fire.
Continued Overleaf
Page 1 of 2
Rapidrop Global
2009 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958 US
Rapidrop Global Limited
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com LISTED
Data Sheet 5.4
Issue A
Operation
When, in the case of a fire emergency, the sprinkler system is activated, flowing water enters the Water Motor Alarm
Gong inlet and strikes the pelton wheel. Rotating in a turbine fashion, the pelton wheel transmits its torque to the
striker assembly which sounds the alarm. The water, after it impinges on the pelton wheel, flows through the drain
outlet in the pelton wheel housing.
Maintenance
a) The 20mm strainer, located in the alarm line from the alarm valve, should be periodically cleaned to ensure
sufficient flow to the Water Motor Alarm Gong.
b) The clean out plug (item 5) should be periodically removed to avoid any accumulation of debris and scale
that may have passed through the strainer.
c) The inside of the gong (item 11) should be checked periodically for the accumulation of foreign material.
Page 2 of 2
Rapidrop Global
2009 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark. US
Rapidrop Global Limited Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com LISTED
Issue B
Compressor
Description
Reciprocating air pump compr
!&++&$"$$""$'$!$"&$+&!
,"'$*!'+&'&!'.
C+ressor and trim ar+&$"$@!$",+rotect fr+"$!+$!"+@
C
motor is contr!!"'ressur
,'
;r
T;"fferential.
Pressure
Max Working Pressure: 8 Bar
Air Displacement: 0.26 m3/min (9.2 cfm)
Specification
V
++&!'!*!!!! ++,$!"$
-ressure r!,,'!,'4;
%'+ressure gauge 0-6 Bar.
=+$$4 ++>"?4++@?++=
Installation
C+r&!"+&$"$!!$$""'$r$+$$$,+$$"reliabilit'.
F&!"$+&$"&"
C,+r"!!"
,&+&$$@$H
J$!&!
!!K,+
J$!,!r.
#! +
4#! ++
Connection to sprinkler '+ pipe
* &!" include a second isolation and second * ! to accommodate
futur'++$$$
C$$$&!"!++"r!++$$"$
$
'+
*$"+ressor.
C!+requirQ
+,&"
&!'$"!r.
C!&+&!",!!"$@&$
C!!!&!"*""!!'$""&
as required.
Rapidrop Global
2011 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com
Data Sheet 5.9
Issue B
MODEL GA
EA
The alarm line pipe must be 20NB (3/4") size with 22.8
Rapidrop Global
2009 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958 Continued Overleaf
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 1 of 4
Data Sheet 5.9
Issue B
22 2 1 3 4 5 14 11 12
16
SPRINKLER ALARM
MODEL - GA A
15
R
122 19 17
LISTED 18
3S38 21
HD
HD FIRE
FIRE PROTECT
PROTECT PVT.CO.
LTD. 13
INLET
THANE
THANE 400604,
- 400604,INDIA
INDIA 20
INLET
24
OUTLET
OUTLET 23 3
10
VIEW 'A' 14
25
8
CLEAN OUT
PLUG
23
7
TO DRAIN
158
PART LIST
ITEM CODE DESCRIPTION QTY. MATERIAL ITEM CODE DESCRIPTION QTY. MATERIAL
NO. NO.
1 5001 HOUSING 1 ALUMINIUM ALLOY 14 5011 STRIKER WASHER 1 ALUMINIUM ALLOY
2 5002 PELTON WHEEL 1 DELRIN 15 5012 STRIKER 1 FIBRE
3 5003 RETAINING RING 1 SS 316 16 5013 STRIKER BUSH 1 ALUMINIUM ALLOY
4 5004 DRIVE SHAFT ADAPTOR 1 DELRIN 17 5014 STRIKER ARM BOLT 1 ALUMINIUM ALLOY
5 5005 BUSH 1 ALUMINIUM ALLOY 18 5015 STRIKER ARM WASHER 1 ALUMINIUM ALLOY
6 5006 PROTECTION COVER 1 ALUMINIUM ALLOY 19 5024 DRIVE SHAFT 1 ALUMINIUM ALLOY
7 5007 GONG 1 ALUMIN IUM ALLOY 20 5016 HOUSING COVER 1 ALUMINIUM ALLOY
8 5008 GONG POST 1 ALUMINIUM ALLOY 21 5017 GASKET 1 NEOPRENE
9 5018 NYLON WASHER 2 NYLON 22 9029 CH.HEAD BOLT 6 PLATED STEEL
10 5009 DOME NUT 1 ALUMINIUM ALLOY 23 5020 GONG STICKER 1 PVC
11 9106 HEX. HED BOLT 1 PLATED STEEL 24 9025 SCREW 1 PLATED STEEL
12 5019 WASHER 1 S.S.
13 5010 STRIKER ARM 1 ALUMINIUM ALLOY
- All dimension in mm
Rapidrop Global
2009 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 2 of 4
Data Sheet 5.9
Issue B
22 2 1 25 24 27 26 3 4 5 14 11 12
16
15
122 19 17
21 18
20 13
9
23 3
10
14
40
8
23
71 WALL THICKNESS 88
PART LIST
ITEM CODE DESCRIPTION QTY. MATERIAL ITEM CODE DESCRIPTION QTY. MATERIAL
NO. NO.
1 5001 HOUSING 1 ALUMINIUM ALLOY 15 5012 STRIKER 1 FIBER
2 5002 PELTON WHEEL
GONG IMPELLER 1 DELRIN 16 5013 STRIKER BUSH 1 ALUMINIUM ALLOY
3 5003 RETAINING RING 1 SS 316 17 5014 STRIKER ARM BOLT 1 ALUMINIUM ALLOY
4 5004 DRIVE SHAFTADAPTOR 1 DELRIN 18 5015 STRIKER ARM WASHER 1 ALUMINIUM ALLOY
5 5005 BUSH 1 ALUMINIUM ALLOY 19 5027 DRIVE SHAFT 1 ALUMINIUM ALLOY
6 5006 PROTECTION C OVE R 1 ALUMINIUM ALLOY 20 5016 HOU SING COVER 1 ALUMINIUM ALLOY
7 5007 GONG 1 ALUMINIUM ALLOY 21 5017 GASKET 1 NEOPRENE
8 5008 GONG POST 1 ALUMINIUM ALLOY 22 9029 CH. HEAD BOLT 6 PLATED STEEL
9 5018 NYLON WASHER 2 NYLON 23 5020 GONG STICKER 1 PVC
10 5009 DOME NUT 1 ALUMINIUM ALLOY 24 5021 WALL SUPPORT WASHER 1 MS
11 9106 HEX. HED BOLT 1 PLATED STEEL 25 5022 PLUG 1 ALUMINIUM ALLOY
12 5019 WASHER 1 S.S. 26 5023 COUPLING 1 STEEL
13 5010 STRIKER ARM 1 ALUMINIUM ALLOY 27 5025 SUPPORT PIPE 1 GI PIPE (BY INSTALLER)
14 5011 STRIKER WASHER 1 ALUMINIUM ALLOY
- All dimension in mm
Rapidrop Global
2009 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958 Continued Overleaf
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 3 of 4
Data Sheet 5.9
Issue B
NOTICE: The equipment presented in this bulletin is to be installed in accordance with the lasted publication standards of
NFPA or other similar organisations also with the provision of government codes or ordinances where applicable. The
information provided by us are to the best of our knowledge and belief, and are general guidelines only. Site handling and
installation control is beyond our reach. Hence we give no guarantee for result and take no liability for damages, loss or
penalties whatsoever, resulting from our suggestion, information, recommendation or damages due to our product. Product
development is a continuous programme of Rapidrop and hence the right to modify any specification without prior notice is
reserved with the company.
Rapidrop Global
2009 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 4 of 4
Data Sheet 5.10
Issue B
3/4" BSPT
TE C H NI C AL DATA :
MODEL RA
320
APPROVALS UL listed and FM approved
3/4" BSPT
168
TheRetarding
HD RD Retarding
ChamberChamber is used
is used with Alarm with
Valve the AlarmTrim
when
Valvevariable pressure
Trim when is anticipated
variable in the is
pressure system. It
anticipated in
is
thea holding
system.tankIttoisprevent
a holdingsounding
tank of to
Sprinkler
preventAlarmthe
during
soundingwaterofpressure surge, butalarm
the sprinkler will permit the sound-
during a water
ing of alarm on sustained o w. The
pressure surge, but will permit the sounding retarding chamber
of the
is connected to alarm port of alarm valve
alarm on a sustained ow. The retarding chamber through re-
striction nozzle. The retarding chamber is part of UL
is connected to the alarm port of the alarm valve
Listed Alarm Valve Trim. The retarding chamber is made
through the restriction nozzle. The retarding
of stainless steel material.
chamber is part of UL Listed Alarm Valve Trim.
The retarding chamber is made of stainless steel
material.
LIMITED WARRANTY
Products supplied by Rapidrop (RD) are warranted against defects in material and workmanship for a period of Two (2) years from the date of shipment. RDs obligation under this warranty
is limited to replace or repair the products or its parts, which are shown to RDs examination to be in a defective condition attributable to RD. No warranty is given for products or components
which have been subject, to misuse, improper installation, corrosion, wear and tear, improper storage, modication or repaired. If the defect attributable to RD cannot be rectied by repair or
replacement, then RD may elect to refund the purchase price of the equipment in complete discharge of its obligation under this Limited Warranty.
IN NO EVENT SHALL RAPIDROP . BE LIABLE IN CONTRACT, STRICT LIABILITY OR ANY OTHER LEGAL THEORY, FOR INCIDENTAL, IN-DIRECT, SPECIAL OR
CONSEQUENTIAL DAMAGES, INCLUDING DAMAGES. FOR INJURY TO PERSON OR DEATH OR DAMAGE TO PROPERTY AND OR PENALTIES RESULTING FROM ANY PRODUCTS
OR COMPONENT MANUFACTURED OR ASSEMBLED BY RD. THIS IS LIMITED WARRANTY ONLY. RD DISCLAIMS WITH RESPECT TO THE PRODUCTS ALL IMPLIED WARRANTIES
OF MERCHANTABILITY AND ALL IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE. THERE IS NO WARRANTY OF ANY NATURE MADE BY RD BEYOND AS
STATED ABOVE.
NOTICE :
The equipment presented in this bulletin is to be installed in accordance with the latest publication standards of NFPA or other similar organisations and also with the provision of government
codes or ordinances wherever applicable. The information provided by us are to the best of our knowledge and belief, and are general guidelines only. Site handling and installation control is
beyond our reach. Hence we give no guarantee for result and take no liability for damages, loss or penalties whatsoever, resulting from our suggestion, information, recommendation or
damages due to our product. Product development is a continuous programme of RAPIDROP and hence the right to modify any specication without prior notice is reserved with the
company.
Rapidrop Global
2009 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com
Data Sheet 5.11
Issue A
MODEL C
NOMINAL SIZE 200, 150, 100 & 80 NB
MAXIMUM SERVICE 17.5 Bar (250 PSI)*
PRESSURE
THREADED OPENING BSPT
MOUNTING Vertical
FLANGE CONNECTION ANSI 150 or PN16
Rapidrop Global
2013 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited
Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 1
Data Sheet 5.11
Issue A
Rapidrop Global
2013 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited
Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 2
Data Sheet 5.11
Issue A
Caution
1) The UL Listing,FM Approval and manufacturers 3) For proper operation of the wet system and to
warranty are valid only when the alarm valve minimize unwanted false alarm, it is important
is installed with Rapidrop trim set and installed as to remove trapped air from the system. The
per installation guidelines. air trapped in the system may also cause
2) Pressure relief valve is required with wet pipe intermittent operation of the Water Motor
system, when a rise in ambient temperature Alarm during sustained flow of water.
can cause system pressure to exceed 17.5
Bar (250 PSI). A 17.7 Bar relief valve setting
should be used.
3.0
0.2
2.0
Nominal Pressure Loss in Kg/cm2
0.08
)
NC
1.0
H)
NC
3I
NC
H)
0.06
4I
(
NB
NC
6I
B(
0.05 0.7
B(
8I
80
0N
0N
B(
10
0.04
0N
15
0.5
20
0.03
0.3
0.02
0.2
0.01
200 400 600 800 1000 2000 3000 5000 7000 10000 15000 20000
Rapidrop Global
2013 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited
Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 3
Data Sheet 5.11
Issue A
3
11
9
5
9 12
4
8
13
11
10
PART LIST
Rapidrop Global
2013 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited
Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 4
Data Sheet 5.11
Issue A
17
17
25
NO 16
14 15 NO
14 24
D
15 18
16
13
29
28
1
13
30 # NC
2,29
10 2
#
@ 1 9
22 11 4
19 28 8 7
28 NO 5
2
1,28 3 1,28
10
21 6
1 26
19 3
23 27 29
26
20
D NOTES
# OPTIONAL TRIM
D DRAIN
NOTE : WHEN PRESSURE SWITCH IS SUPPLIED THEN SL.NO. 22 PLUG NOT REQUIRED.
Rapidrop Global
2013 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited
Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 5
Data Sheet 5.11
Issue A
Rapidrop Global
2013 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited
Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 6
Data Sheet 5.11
Issue A
17
17
25
NO 16
14 15 NO
30 14
# 24
15 18 D
#
16
13
@
22 29
19
28
2
21 1 1
# 12
23 27 # NC
10 2
1 2,29
11
28 8 4 9
28 NO
31 5
10 3 7
1,28
D 1,28
32 # 26
6
# 29
19
26 3
20
NOTES
# OPTIONAL TRIM
D DRAIN
NOTE : WHEN PRESSURE SWITCH IS SUPPLIED THEN SL.NO. 22 PLUG NOT REQUIRED.
Rapidrop Global
2013 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited
Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 7
Data Sheet 5.11
Issue A
QUANTITY
ITEM CODE
DESCRIPTION SIZE PER ALARM VALVE SIZE
NO. NO.
200 NB 150 NB 100 NB 80 NB
Rapidrop Global
2013 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited
Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 8
Data Sheet 5.11
Issue A
Rapidrop Global
2013 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited
Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 9
Data Sheet 5.11
Issue A
PG PG
PS**
AV AT RC
~
TO DRAIN
AC
TO DRAIN
TO DRAIN
UPSTREAM
(FROM SUPPLY)
PG PG
PS**
AV AT
~
AC TO DRAIN
TO DRAIN
TO DRAIN
UPSTREAM
(FROM SUPPLY)
NON RETURN VALVE RESTRICTION NOZZLE AV - ALARM VALVE AC - SPRINKLER ALARM CONTROL VALVE
VALVE ASSEMBLY. G - SPRINKLER ALARM AT - SPRINKLER ALARM TEST VALVE
ANGLE VALVE STOP VALVE PG - PRESSURE GAUGE BY USER (NOT IN 'HD' SCOPE OF SUPPLY)
STRAINER OPTIONAL PS - PRESSURE SWITCH
NC - NORMALLY CLOSED NO - NORMALLY OPEN RC - RETARD CHAMBER
NOTE :-
1) SPRINKLER ALARM CONTROL VALVE MUST BE 2) SPRINKLER ALARM TEST VALVE MUST BE KEPT
KEPT NORMALLY OPEN IF THIS VALVE IS KEPT NORMALLY CLOSED CONDITION. VALVE IS
CLOSED THE SPRINKLER ALARM BELL/ ELECTRIC OPENED TO TEST THE SPRINKLER ALARM
ALARM WILL NOT SIGNAL. BELL / ELECTRIC ALARM.
Rapidrop Global
2013 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited
Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 10
Data Sheet 5.11
Issue A
SPRINKLER
ALARM D 115 130 170 185
E 185 205 215 250
TO TO DRAIN
DRAIN A B
NB NB NB NB
TO
B 450 495 495 500
SPRINKLER
ALARM C 440 440 440 460
C
TO TO DRAIN
DRAIN A B
Rapidrop Global
2013 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited
Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 11
Data Sheet 5.11
Issue A
NOTICE: The equipment presented in this bulletin is to be installed in accordance with the lasted publication standards of
NFPA or other similar organisations also with the provision of government codes or ordinances where applicable. The
information provided by us are to the best of our knowledge and belief, and are general guidelines only. Site handling and
installation control is beyond our reach. Hence we give no guarantee for result and take no liability for damages, loss or
penalties whatsoever, resulting from our suggestion, information, recommendation or damages due to our product. Product
development is a continuous programme of Rapidrop and hence the right to modify any specification without prior notice is
reserved with the company.
Rapidrop Global
2013 Rapidrop Rutland Business Park, Newark Road, Peterborough, PE1 5WA, United Kingdom
Rapidrop is a registered trade mark.
Rapidrop Global Limited
Tel: +44 (0) 1733 847 510 Fax: +44 (0) 1733 553 958
Registered in England No. 5503278 e-mail: rapidrop@rapidrop.com web: www.rapidrop.com Page 12