ACCELERATOR CONTROL, FUEL &
EXHAUST SYSTEMS
SECTION F E ACCELERATOR CONTROL, FUEL &
EXHAUST SYSTEMS
SECTION F E
CONTENTS
ACCELERATOR CONTROL SYSTEM
FUEL SYSTEM reeset
EXHAUST SYSTEM sn.
saves FE-5004
FE-5001ACCELERATOR CONTROL SYSTEM We
aeewa| Adjusting Accelerator Cable
=~ 1. Insert grooved abutment of accelerator cable into rubber
bush.
2. Make sure fuel pump lever is in fully shut position and con-
nect inner cable end in hole closest to grooved abutment.
3. Pull back grooved abutment until inner cable free play is
taken up and fuel pump lever starts to move. From that
position, move grooved abutment forward one complete
4 \ groove to achieve free play.
Co eel ae ae 4. Insert spring clip in first visible groove behind rubber bush
NFEOA
(make sure arrow on spring clip points in direction shown)
Ensure spring clip fully engages grooved abutment behind
rubber bush.
Feel pu over ceooven
Saring ep abutment
FE-5002