Beruflich Dokumente
Kultur Dokumente
ANSYS, ANSYS Workbench, Ansoft, AUTODYN, EKM, Engineering Knowledge Manager, CFX, FLUENT, HFSS, AIM
and any and all ANSYS, Inc. brand, product, service and feature names, logos and slogans are registered trademarks
or trademarks of ANSYS, Inc. or its subsidiaries in the United States or other countries. ICEM CFD is a trademark
used by ANSYS, Inc. under license. CFX is a trademark of Sony Corporation in Japan. All other brand, product,
service and feature names or trademarks are the property of their respective owners.
Disclaimer Notice
THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION INCLUDE TRADE SECRETS AND ARE CONFID-
ENTIAL AND PROPRIETARY PRODUCTS OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS. The software products
and documentation are furnished by ANSYS, Inc., its subsidiaries, or affiliates under a software license agreement
that contains provisions concerning non-disclosure, copying, length and nature of use, compliance with exporting
laws, warranties, disclaimers, limitations of liability, and remedies, and other provisions. The software products
and documentation may be used, disclosed, transferred, or copied only in accordance with the terms and conditions
of that software license agreement.
ANSYS, Inc. and ANSYS Europe, Ltd. are UL registered ISO 9001: 2008 companies.
For U.S. Government users, except as specifically granted by the ANSYS, Inc. software license agreement, the use,
duplication, or disclosure by the United States Government is subject to restrictions stated in the ANSYS, Inc.
software license agreement and FAR 12.212 (for non-DOD licenses).
Third-Party Software
See the legal information in the product help files for the complete Legal Notice for ANSYS proprietary software
and third-party software. If you are unable to access the Legal Notice, Contact ANSYS, Inc.
Release 18.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates. iii
Release 18.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
iv of ANSYS, Inc. and its subsidiaries and affiliates.
Chapter 1: Migrating to Fluent Meshing 18.0
The purpose of the Fluent Meshing Migration Manual is to help you transition to the most recent version
of ANSYS Fluent Meshing.
Read through the entire document to understand the changes that have taken place.
1.1.The Contents of This Manual
1.2. Additional Resources
If you are upgrading across several releases, you may find it helpful to consult technical support for
assistance.
For a list of platform/OS levels that are supported in the current release, visit the ANSYS website.
Please note that beta features have not been fully tested and validated. ANSYS, Inc. makes no commit-
ment to resolve defects reported against these prototype features. Changes in behavior are sometimes
expected and are not captured in this document. However, if there are differences between the Release
16.X beta features and the Release 18.0 standard Fluent Meshing features that concern you, contact
technical support for assistance. Your feedback is appreciated and will help us improve the overall
quality of the product.
Release 18.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates. 1
Release 18.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
2 of ANSYS, Inc. and its subsidiaries and affiliates.
Chapter 2: Feature Changes in Fluent Meshing 18.0
Several features have been improved or added in Fluent Meshing Release 18.0.
The file size and time taken for writing case files in the Hierarchical Data Format (HDF) should be significantly
reduced due to a change in the default compression level.
Domains are now updated to include new zones after face zones are remeshed and replaced.
The option for creating intersection loops for marked cross-object intersections has been changed to create
only cross-object intersection loops.
An octree option has been added for hexcore cell generation. This option will result in faster hexcore mesh
generation but does not support hexcore generation up to boundaries.
New scripting commands are available for marking faces; improving and remeshing boundary faces; and
connecting overlapped face zones.
Release 18.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates. 3
Release 18.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
4 of ANSYS, Inc. and its subsidiaries and affiliates.
Chapter 3: Text Command List Changes in Fluent Meshing 18.0
Changes to the text command lists are classified as either Modified or New; where a modified command
refers to either a changed behavior or a deleted command, and a new command is one that did not
exist in previous versions of Fluent Meshing.
Details of the text command list changes are tabulated in the following pages:
3.1. Modified Fluent Meshing Text Commands
3.2. New Fluent Meshing Text Commands
Table 3.1: Modified Text Commands/Settings for the file/ Menu (p. 5)
Table 3.2: Modified Text Commands/Settings for the report/ Menu (p. 5)
Table 3.3: New Text Commands for the mesh/ Menu (p. 5)
Text Command
/mesh/hexcore/controls/octree-hexcore?
Release 18.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates. 5
Release 18.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
6 of ANSYS, Inc. and its subsidiaries and affiliates.