Beruflich Dokumente
Kultur Dokumente
SITE ID
Waterproofing
jumper connectors at both end, antenna and RRU
waterproof measure done
in cabinnets,waterproofing modules be used systematically
and cables to be run in right size holesthe blocks of non-
used holes should not be removed.
all cables must follow the outdoor cabletray or cable racks in
cabinets or designed special routing
cable clips to be used and fastened properly, if its bound to
use.
all cables must be bound with right ties
signal cables and power cables are banded separately
cables between outdoor cabinets must be protected with
pipes
Cable laying
cables must have a waterproof arch or rain shed before
entering
equipment room and the lowest point of bend should be
Cable laying 0~15cm lower than feeder window
SITE TYPE
ZTE supervisor:
( Signature+date)