Beruflich Dokumente
Kultur Dokumente
SustainAbility
to the Power of
Tate Access Floors & SustainAbility
Dealer Network
Tates worldwide team of dealers will assist you with your
building needs. Find a dealer in your area by clicking on contacts
at www.tateglobal.com.
Comprehensive Website
Find everything you need from detailed product information,
technical support documentation and specifications to industry links,
project case studies and more at www.tateglobal.com.
Tate is committed to providing the best quality access floors in improve our products. As a result Tates panels out-perform
the world by requiring stringent product performance and similar products made by other manufactures.
consistent criteria. We maintain our reputation for innovation and
In addition to quality products Tate offers the most
exceptional product quality through the hard work and
comprehensive international support services in the industry.
dedication of our laboratory and engineering personnel. All
With regional sales and support staff, a wide range of design and
facilities manufacturing Tate products are staffed by independent
cost estimating tools, and a comprehensive website we are able
quality inspectors who ensure that every panel meets the tightest
to provide the resources you need at any phase of the design
criteria for consistency, flatness and overall performance.
process. The website www.tateglobal.com contains information
Our products go through the most rigorous independently on the benefits of underfloor service distribution, product
certified testing process in the industry to meet all levels of performance, system selection guides, specifications, and
international standards. Our R&D team routinely examines the details. Tate dealers are also available to assist in system
latest manufacturing technologies and materials to continually selection, installation and design support for custom applications.
Design Load - Edge Test Rolling Load Test Ultimate Load Test
Important Load Criteria because some materials used to make access floors show little
Important criteria such as design loads and safety factors are or no visible damage before failing. A panel that fails without
often over-looked when evaluating an access flooring system. warning can be very dangerous in the event that it is overloaded.
The design load, often referred to as the safe working load, is not Different materials fail in different ways. The chart below
the same as a concentrated load because it represents a system compares steel with calcium sulphate two common materials
test rather than a panel test. The system test evaluates two critical used in access floor panels. As you can see steel will bend
requirements, yield point and ultimate load. This is important significantly before failing providing additional warning and safety.
Steel and Calcium Sulphate Mode of Failure
Calcium Sulphate
Load Definitions
Steel Safety Factor >2 Yield Point - The Yield point is the load at which permanent
damage to the system begins to occur.
Design Load/
Yield Point Design Load1 - The safe working load that can be applied to
the system determined by choosing the smaller value of the
ultimate load divided by a safety factor of two or the yield point.
Yield Point
Ultimate Load Safety Factor2 - The multiple of the design load to the ultimate load.
Design Load
1 For more information on design load visit Tates website and click on
Resources / Technical Bulletins.
Safety Factor =2 2 The American Society of Civil Engineers (ASCE) and The American Institute
of Steel Construction (AISC) recommend a safety factors for collapse of two.
LOAD
4
ConCore Panels
Panel Features
Extensive quality control checks to ensure performance
Panel remains strong when cut for service distribution
Completely non-combustible with no plastic components
Tight consistent seams minimize air leakage Available in 24 and 600mm sizes
Full range of factory or field applied finishes Excellent acoustical properties
Hollow panels without cement fill are available Zinc whisker free
Applications
With three standard load performance grades and an extensive selection of understructure supports and floor finishes, these panels
are suitable for a wide range of applications from typical office applications to classroom/training facilities, libraries, courthouses,
casinos, data centers, and even light industrial applications.
*For more information on Design Load and Safety Factor calculations, visit Tate's website at
www.tateglobal.com/resources/technical_bulletins.aspx
5
Air Flow Panels
For Concore and All Steel Systems
6
Understructure Systems
For Concore and All Steel Systems
CornerLock
Understructure Features
Steel pedestal head provides optimum strength.
Pedestal nut provides anti-vibration and locking features.
Seismic force-resistant pedestals are available that limit or
eliminate the need for special bracing.
Typical floor heights from 150-450mm.
Bolted Stringer
Understructure Features
Designed for computer rooms, data centers, industrial applications,
and heavy rolling load areas.
Allows floors to be built over 600mm high.
Panels can be gravity-held in understructure for fast removal and replacement.
Stringers provide lateral resistance to heavy rolling loads and seismic loading.
Seismic force-resistant pedestals are available that limit or eliminate the
need for special bracing.
Non-electrogalvanized components available to eliminate zinc whisker contamination.
Typical floor heights from 450-1200mm. Zinc whisker free pedestals available
7
Aluminum Panels
Solid Panel
Die Cast aluminum panels meet class A fire rating.
Available with a wide selection of conductive and static
dissipative coverings or coatings.
Contains no ferrous materials to disrupt magnetic fields.
Excellent rolling load performance.
Lightweight for ease of handling.
Available on freestanding, cornerlock and bolted stringer
understructure
Perforated Panel
Perforated panels provide optimum laminar airflow, without
turbulence.
Available in 600mm sizes
Several perforated panel patterns from which to choose.
Available on freestanding, cornerlock and bolted stringer
understructure
Grate Panel
Designed to provide superior air flow.
Unique design reduces rolling load vibrations.
Fully interchangeable with solid panels.
A damper can be used to regulate airflow.
Available in epoxy powder and nickel chrome coatings.
8
Understructure Systems
For Aluminum Systems
Freestanding
Understructure Features
Offers the ultimate in quick easy installation and accessibility
Highly conductive non PVC gaskets that reduce sound & vibration
Steel pedestal head provides optimum strength
Pedestal nut provides flexible height adjustment for leveling
Gasket features positioning tabs for proper alignment
Set screw side nut permanently locks pedestal height
Epoxy coated base
Cornerlock
Understructure Features
Cornerlock screws ensure positive contact and positioning
Highly conductive non PVC gaskets that reduce sound & vibration
Steel pedestal head provides optimum strength
Pedestal nut provides flexible height adjustment for leveling
Gasket features positioning tabs for proper alignment
Set screw side nut permanently locks pedestal height
Typical floor heights from 300-600mm
Bolted Stringer
Understructure Features
Designed for computer rooms, data centers, industrial applications,
and heavy rolling load areas.
Allows floors to be built over 600mm high.
Panels can be gravity-held in understructure for fast removal and replacement.
Stringers provide lateral resistance to heavy rolling loads and seismic loading.
Seismic force-resistant pedestals are available that limit or eliminate the
need for special bracing.
Hot dipped galvanized to eliminate zinc whisker
Typical floor heights from 450-1200mm.
9
Underfloor Service Distribution
Tate modular wiring, cabling and underfloor air delivery systems can enhance your access floor
10
Modular Wiring and Cabling
For Underfloor Distribution Systems
PVD Servicenters
11
Tate Access Floors, Inc.
International Sales & Support Office:
169 Jalan Jurong Kechil
#7-011, Sherwood
Singapore 598669
Tel: 65-6468-1332 Fax: 65-6468-6681
Corporate Headquarters:
7510 Montevideo Road, Jessup, MD 20794
Tate Hotline: 1-800-231-7788 Tel: 410-799-4200 Fax: 410-799-4207
Production Facilities:
7510 Montevideo Road, Jessup, MD 20794
52 Springvale Road, Red Lion, PA 17356
880 Equestrian Court, Oakville, ON L6L 6L7 Canada
tateglobal.com
kingspan.com
A member of
Tate Building Technology Platform, SustainAbility, ConCore, GrateAire, PosiLock, PosiTile, PVD Servicenter, Floating Floors and Integral Trim are registered trademarks of
Tate Access Floors, Inc. 2009 Tate Access Floors, Inc.