Beruflich Dokumente
Kultur Dokumente
CAL TR 12x40
Granular Activated Carbon
Design Considerations
Features
Design parameters for CAL TR depend on the application in which it
Reagglomerated metallurgical grade bituminous coal is used. The following are ranges of typical operating conditions:
Uniformly activated granules Empty bed contact time 30 240 min.
High pore volume Bed Depth 3 30 ft. (1 9 meters)
Dedusted product Linear velocity 0.25 2.0 gpm/ft2
(0.17 1.4 cm/sec)
Benefits The pressure drop per meter of bed depth for CAL TR carbon is shown
High mechanical strength and uniform transport pore distribution for different liquid viscosities.
resulting in excellent reactivation performance, low attrition loss To determine what is best for your application and assistance with
during handling and minimizing generation of fines in operations the design, please contact Calgon Carbon Corporation by calling
requiring backwashing. 1-800-4-CARBON.
Reagglomeration creates optimal transport pores for
faster adsorption.
Reactivation
Produced with virtually no fines or dust and is therefore
Once granular activated carbon is saturated or the treatment objective
particularly suitable for odor removal and purification.
is reached, it can be recycled by thermal reactivation for reuse.
Combines excellent decolorization power with an effective trace
Reactivation involves treating the spent carbon in a high temperature
removal capacity throughout the whole granule, not just on the
steam environment reactivation furnace. During this treatment
outside due to reagglomeration.
process, the undesirable organic matter on the carbon is thermally
Excellent adsorption properties and constant adsorption kinetics destroyed. Recycling by thermal reactivation is a highly technical
in a wide range of applications process to ensure that spent carbon is returned to a reusable quality.
Allows a more efficient use of the carbon and results in a lower Reactivation and reuse reduces disposal costs associated with one
carbon dosage. time use systems.
Applications
CAL TR 12x40 carbon was developed for applications where a
combination of adsorption rate and trace removal capacity is needed.
CAL TR 12x40 is best suited for a number of industrial and food
grade applications:
Glycerin purification
Viscous organics decolorization/purification
Solvents and organic solution purification
Kerosene decolorization
www.calgoncarbon.com
Typical Pressure Drop Typical Bed Expansion
Downflow pressure drop through a bed of CAL TR 12x40 Bed Expansion During Backwash of CAL TR 12x40 with Water
100 70
Pressure Drop (Inches H2O/ft. bed)
60
44F
10
50
72F
% Expansion
40
1
30
20
0.1
10
0.01 0
0.1 0.2 0.5 0.8 1 2 3 4 5 6 7 8 910 0 2 4 6 8 10 12
Velocity (gpm/ft2)
Superficial Velocity (gpm/sf)
Packaging
Please contact Calgon Carbon for options and availability.
Safety Message
Wet activated carbon preferentially removes oxygen from air. In closed
or partially closed containers and vessels, oxygen depletion may reach
hazardous levels. If workers are to enter a vessel containing carbon,
appropriate sampling and work procedures for potentially low oxygen
spaces should be followed, including all applicable federal and state
requirements. Please refer to the MSDS for all up to date product
safety information.
www.calgoncarbon.com