Beruflich Dokumente
Kultur Dokumente
MARINE-HARBOR
STEEL PLANT
METAL RECYCLING
STEEL PLANT
MARINE-HARBOR
LIFTING MAGNET & MAGNET FORK 3
C C
H
H
A B
A B
E E
I I
High Mount Cab
4
LZ600 is a high post type of material handling machine designed exclusively for seaport cargo loading and unloading
from vessels speedily and powerfully.
An assortment of arm-top attachments enable the machine to take on a wide range of materials.
The cab can raise and slide forward to provide an operator with a wider view. A visual check of the surroundings with
better visibility now enables an operator to do the work with higher precision.
The cycle time has been dramatically improved as compared with a conventional working mode using a truck crane,
thus promising big reduction in working time.
The cost accruing from working time and labor has been lowered, while bringing higher efficiency to seaport cargo
handling work.
Working Range
(when transported3190)
(vessel)
Specifications
Item Model LZ600-1
Operating weight kg 60800
Max. working reach mm 16750
Travel speed H/Mid/L 3.7/2.8/2.2
Scrap grapple capacity m3 0.8
Magnet dia. mm 1500
Material handlers other than the above are also available.
Cargoes are loaded from a vessel on to a truck. A 2-stage parallel link cab is adopted that gives an operator a sense of stability.
A wide variety
of attachments
Lifting magnet Rotary fork Orange grapple Clamshell bucket
Working Range
Specifications
Item Model PC450LC-7
Operating weight kg 50000
ne
12840
6
SCRAP HANDLING MACHINE
Scrap Handler
A high mount and parallel link cab assures a wide view from the operator's seat.
A scrap handling machine that demonstrates distinguished performance in the scrap yard.
A long track with flat shoes assures high stability of the machine, and a long working reach, coupled with an optimum attachment, promises highly efficient work.
Scrap Handler
Best suited to loading on a high spot in a tight quarter Wide working range
PC400LC scrap handler with parallel link cab and two piece boom
weight of 1050kg)
emachi
Overall height
mm 2825 3315
(top of work equipment)
Di
Li
ft
inghooks
Optional equipment
Traction force increasing travel motor, cab front guard-
half height guard
8
A full machine lineup to meet with any differing work place
Trimming Dozer
A wide lineup of trimming dozers ranging from D31 to D85 plus an assort
ment of attachments assure highly efficient cargo handling in a vessels car
go hold.
A high blade is designed to have an ideal curved shape on both front and
back surfaces to facilitate trimming work. In addition, the whole blade can
be largely pitched back and forth. Thanks to this blade design, a large
amount of bulk cargo can be raked together with high efficiency.
Robust protectors are provided on the rear of the machine and on its left
and right sides. A vital part like a fuel tank can be protected against dam
age due to a bump.
A short exhaust pipe is installed as a standard equipment across the trim
ming dozers so that the machine can be brought in and out of a cargo hold
without difficulty.
Specifications
I H
C
E
G.L
G D
F
B
Model
Item D31E-20 D31P-20 D41A-3 D53A-17 D65E-12 D65EX-12 D85A-21
Operating weight* kg 7000 7660 10540 13460 19950 19950** 24500
Flywheel power kW (HP/PS)/rpm 52 (70/71)/2350 52 (70/71)/2350 68 (92/93)/2350 93 (124/126)/1900 135 (180/183)/1950 135 (180/183)/1950 168(225/228)/2000
Performance
Travel speed
Forward 1st 2.2 2.2 2.4 3.2 3.9 3.9 3.5
2nd 3.9 3.9 4.4 5.9 6.8 6.8 6.5
km/h
3rd 6.5 6.5 7.6 9.8 10.6 10.6 10.7
Reverse 1st 2.4 2.4 3.0 3.9 5.0 5.0 4.7
2nd 4.3 4.3 5.5 7.1 8.6 8.6 8.3
3rd 7.1 7.1 9.4 11.9 13.4 13.4 13.3
Dimension*
A Overall length mm 4510 4690 5120 5510 6475 6475 6420
B Overall width mm 2480 2780 2620 2890 3210 3210 3410
C Overall height mm 1955 2045 2005 2365 2990*** 2990*** 3090
D Length of track on ground mm 1880 2185 2060 2365 2675 2675 2730
Ground pressure kg/cm2 0.47 0.29 0.64 0.62 0.73 0.74 0.80
Dozer equipment
Weight (includes hydraulic control unit) kg 1380 1280 1430 1800 4330 4330 4440
Length mm 2480 2780 2620 2890 3210 3210 3410
Height mm 750 750 850 930 1000 1000 1185
Max. lift above ground mm 1480 1630 1435 1690 1610 1610 1730
E Max. drop below ground mm 710 650 670 730 685 685 740
F Breast dimension mm 1200 1375 1540 1785 1610 1610 1580
G Max. pitch adjustment
H Forward degree 38 37 38 50 29 29 27
I Reverse degree 24 26 25 25 22 22 24
* : Including dozer equipment in addition to bare tractor
** : Including cab and air conditioner
*** : To top of cab
Metal Recycling / Marine-Harbor / Steel Plant 9
A WIDE VARIETY OF SEAPORT CARGO HANDLING MACHINES
Seaport cargo handling machines designed to take on versatile cargoes
From timbers to containers; Seaport cargoes really vary in the shape and weight, therefore require a
different approach in the handling. Equipped with diversified functions and attachments, our machines
are well capable of seaport cargo handling in different forms.
Loading and unloading work plus sorting-out work that are adequate to the type of cargoes to be han
dled; A wide range of our dedicated machines are provided to achieve this role with high efficiency.
Log & Lumber Handling Wheel Loader Wheel Loader with Chip Bucket
In a combination with a rich assortment of attachments, our
wheel loaders can cope with loading, unloading and transport
of huge logs, lumber, etc. in a large quantity.
Dumping Fork Lumber Fork Lumber Grapple Log Grapple Log - Lumber Fork Log - Lumber Grapple
10
HEAT RESISTANT MACHINES
Heat resistant machine, a machine that will never fail to display its performance at a
work place of high temperature
The work in a high temperature work place, typically a slag yard, is always fraught with various problems and
danger like early deterioration and corrosion of parts and ignition. Komatsu has thought out solutions to those
problems, hoping that danger in such a hard working environment be minimized and that an operator be re
lieved of mental and physical burdens. Here is a machine on offer in which heat resistance technologies Komatsu
has nurtured are built in, and which is a must to steel plants and the like.
Tire protector
The tires are protected by tire protectors against strong heat
inherent in a work place of high temperature.
Specifications
Item Model PC350-7
Operating weight kg 47400
Max. digging reach mm 12675
Slag temperature condition These factors may differ depending on a
Slag treatment time working environment and working con
ditions.
For more details, Please contact your
Komatsu distributor.
Improvement points
12
Slag Treatment Dozer Shovel
Remark:
First a slag dump truck transports hot fresh slag to a slag yard. Then a slag treatment
dozer shovel crushes and piles up the hot slag before it completely cools down. This
work facilitates the subsequent process, i.e. loading of the crushed slag. Slag treat
ment dozer shovels may not be used for handling hot fresh slag while its temperature
is still extremely high.
D75S-5 slag treatment dozer shovel
PC120-6
Specifications
Item Model PC120-6 Control method Remote control (with cable)
Operating weight kg 17000 Boom type 2-piece boom
Flywheel power kW(HP/PS)/rpm 64(86/87)2200 Telescopic arm
Dimensions
Fuel tank capacity R 242 Type 3-stage sliding (driven by hydraulic cylinder)
Hydraulic oil tank capacity R 90 Slide stroke 1955mm
Equipment structure
Overall length (in transport) mm 9345 Arm rotary mechanism Swing motor and internal gear circle
Overall width mm 2490 Breaker
Torpedo car Overall height (revolving warning lamp excluded) mm 2715 Drive method Hydraulically driven
Tail swing radius mm 2550 Chisel dia. 65mm
Max. crushable reach mm 8255 Breaker support arm
Working range
Forward (from swing center and mm 8515 Type Single stage sliding (driven by hydraulic cylinder)
when breaker slide extended) Slide stroke 500mm
Sideward (from machine center and when mm 5650 Tilt angle 105(driven by hydraulic cylinder)
telescopic arm and breaker slide extended) Arm rotary mechanism Swing motor and internal gear circle
Min. turning radius of work equipment mm 4900 Dust collector drive method Hydraulically driven
Air compressor drive method Hydraulically driven
3045
Max. digging reach mm 5055
Max. digging height mm 5535
Max. dumping height mm 3810
Max. vertical digging depth mm 2640
Boom offset amount (from center of work equipment) mm ( 820(
L) 520
R)
Model Komatsu 3D84E
Engine
Radio Control System and Image Transmission System mounted on Construction Equipment
Image transmission system WA380 with heat resistance specifications Hydraulic excavator with power fork
14
DUMP TRUCK WITH STEEL MILL SPECIFICATIONS
Dump truck with special specifications designed for efficient transport of slag
In steel mills, there is always a frequent call for transport of various heavy and hard-to-handle materials like
hazardous slag of very high temperature. That's when and where Komatsu's dump trucks play an active and im
portant role, armed with special steel mill specifications Komatsu developed.
Komatsu's divers technologies have taken into account machine's working efficiency and economy, as well as
durability. Such technologies are relied on and actively utilized out there.
Specifications
Item Model HS150S-11
Type Self-loading
Slag pot loading method Cam type loading
Hook type loading
Performance Engine
Model Komatsu SA6D125E
Max. power kWHP/PS/rpm 235315/320/2100
Max. payload (including slag pot) kg 45000
Slag pot capacity 6.010
Max. travel speed (without load) 40
Min. turning radius mm 9500
Weight Empty vehicle weight kg 39000
Gross vehicle weight kg 84000
HS150S-11 Overall length mm 8500
Overall width mm 4700
Dimension