Beruflich Dokumente
Kultur Dokumente
06
TRANSMISSION 722.6 in MODEL 129, 140, 163, 170, 199, 202, 208, 210, 211, 215, 220, 230, 240
TRANSMISSION 722.6 in MODEL 461.302 /304 /332 /334 /342 /344 /345 /346, 463.206 /209 /232 /233 /240 /241 /243 /244 /245
/246 /247 /248 /249 /250 /254 /270 /271 /308 /309 /322 /323 /330 /331 /332 /333
16 Shift plate
17 Leaf spring
17 A Bolt
17 B Bolt
Y3/6 Electrical control unit
Y3/6y1 Modulating pressure control
solenoid valve
Y3/6y2 Shift pressure control
solenoid valve
Y3/6y3 1-2 and 4-5 shift solenoid
valve
Y3/6y4 3-4 shift solenoid valve
Y3/6y5 2-3 shift solenoid valve
Y3/6y6 Torque converter lockup
PWM solenoid valve
P27.19-0218-06
Modification notes
Disassemble/assemble
1 Take off caps of solenoid valves Only on transmission 722.6 as of 1.8.97
Caps for solenoid valve, new Transmission 722.6 BT27.19-P-0003-01A
2 Unscrew bolts (17a, 17b) and remove leaf Installation: Note the different lengths of
springs (17) the bolts (17a, 17b).
*BA27.19-P-1002-01A
3 Use pliers to pull modulating pressure control Installation: Check the O-rings on the
solenoid valve (Y3/6y1) and shift pressure modulating pressure control solenoid valve
control solenoid valve (Y3/6y2) out of shift (Y3/6y1) and on the shift pressure control
plate (16) solenoid valve (Y3/6y2); fit a new valve if
necessary.
Pliers *606589003700
4 Use pliers to pull 1-2 and 4-5 shift solenoid Installation: Check the O-rings on the
valve (Y3/6y3), 3-4 shift solenoid valve 1-2 and 4-5 shift solenoid valve (Y3/6y3), 3-4
(Y3/6y4) and 2-3 shift solenoid valve shift solenoid valve (Y3/6y4) and 2-3 shift
(Y3/6y5) out of shift plate (16) solenoid valve (Y3/6y5); fit a new valve if
necessary.
Pliers *606589003700
5.1 Remove electric control unit (Y3/6) from shift Transmission 722.6 up to end no. 0026194
plate (16)
Installation: Make sure that the two
centering pins of the electric control unit
(Y3/6) engage in the shift plate (16).
5.2 Bend retaining lug on stiffening rib on oil- Transmission 722.6 as of end no. 0026195
temperature sensor to one side and remove
electric control unit (Y3/6) from shift plate
(16)
Retaining lug added to electrohydraulic 722.6 BT27.19-P-0001-01A
control unit
6 Disassemble shift plate (16) Only when the shift plate (16) is dirty or AR27.35-P-0350A
metal shavings are present in the
transmission oil.
7 Assemble in the reverse order
Copyright Daimler AG 9/17/10 G/01/08. This WIS printout will not be recorded by the update service. Page 1
Electrohydraulic control unit
606 589 00 37 00
Pliers
Copyright Daimler AG 9/17/10 G/01/08. This WIS printout will not be recorded by the update service. Page 2