Beruflich Dokumente
Kultur Dokumente
In
COORDINATORS
Prof. G. S. Dangayach, Head, MED Aspiring student of B. Tech/ M. Tech / Ph.D in Computational and Experimental
Prof. Awadhesh Kumar Bhardwaj, MED Mechanical/Automobile/Aeronautical/Materials/Polymer Analysis in Industrial Applications in
Dr. Amar Patnaik, Assistant Professor, MED Engineering etc can apply for program. Entries from
interested final year polytechnic students can also be Mechanical Engineering
Dr. Harlal Singh Mali, Assistant Professor, MED
Dr. Amit Singh, Assistant Professor, MED considered. (May 22nd -July 5th, 2017)
Dr. Dinesh Kumar, Assistant Professor, MED
Dr. Gunjan Soni, Assistant Professor, MED REGISTARTION FEE
Dr. M. L. Meena, Assistant Professor, MED
The registration fee for B.Tech Rs. 7500/-
COMMUNICATE TO M.Tech/ Ph.D Rs. 20,000/-
and for polytechnic students Rs. 7500/-
Dr. Amar Patnaik is to be paid through demand draft drawn in favour
Assistant Professor, of Registrar, MNIT Jaipur payable at JAIPUR.
Mechanical Engineering Department, Registration fee includes the following:-
MNIT JAIPUR (Rajasthan) -302017 Program Kit
+91-9530146812 Study Material
apatnaik.mech@mnit.ac.in
www.mnit.ac.in ACCOMODATION
Note: All the correspondence regarding program shall
be made through email only.
Limited accommodation will be arranged for the
students in the Boys and Girls hostels on payment
IMPORTANT DTAES
basis as per Institute norms.
Summer Internship Program (SIP) is an additional part Fundamentals of Tribology Malaviya National Institute of Technology
of the course curriculum for the students of B.Tech and 1. Fabrication and Development of Polymer/Metal
alloy composites Jaipur , Jaipur (Rajasthan)-302017
M.Tech in Mechanical Engineering and other engineering
2. Friction, Wear, Lubrication, importance of tribology, (May 22nd -5th July 2017)
disciplines. This is a great opportunity for you to gain
experience of research, develop project management 3. Basic characteristics of contact surfaces, Friction:
skills, enhance your CV and earn more knowledge in causes of friction in mechanical systems Full Name:---------------------------------------------------
real Industrial problems. Internships run for six weeks Using Hyper-Mesh Course studying:--------------------------------------------
through the summer. 1. To introduce the basics of Hyper-Mesh and its Institute: ----------------------------------------------------
features.
Students are allocated self-contained projects by 2. To perform bending analysis of simply supported Address of Correspondence:------------------------------
academic supervisors, spanning a broad range of beam under uniformly distributed load using Hyper- ----------------------------------------------------------------
subject areas and feeding directly into current research Mesh. ----------------------------------------------------------------
and teaching activities. During the SIP, each student is Instrumentation and Robotics ----------------------------------------------------------------
assigned to handle the various equipments and 1. Introduction to Industrial Robotics
machines available in the laboratory. This course will be 2. Introduction to Industrial Automation and Control
introductory in nature addressing the fundamental 3. Pressure and Force measurements Pin Code: ___________ Mobile:----------------------
understanding as well as the applications of composite 4. Introduction to sensors and measurement systems E.mail:_____________________________________
materials. Advance Manufcaturing Process
1. Conventional & Non-conventional Machinability
Venue of the Program Studies for different materials for automotive & Details of Registration Fee:
aviation components. Name of Bank & Branch:
Malaviya National Institute of Technology Jaipur 2. Additive and Subtractive Manufacturing for
(earlier MREC) is one of the NITs established in Jaipur Innovative Product Development through CAD/CAM
DD No.: ______________Dated: -----------------------
known as Pink City. The institute is actively engaged in tools
research, consultancy and developmental activities 3. Abrasive Flow Finishing of Difficult to Finish
besides imparting regular teaching. Mechanical Components and Materials For Rs.____________________________________
engineering department started functioning in 1963 at 4. Using Mechatronics for improving Products and (DD should be in favour of Registrar, MNIT Jaipur, payable at
the inception of the institute. The department offers a Automating Manufacturing Processes. Jaipur)