Beruflich Dokumente
Kultur Dokumente
Fig 1: First drawing from Mr Claude Vasconi and transformation Fig 5: Reference Building.
using ACB software to ANGELINA.
Loads
Geometrical details of the cutting Variable load = 5 kN/m
Self weight of the steel beam = 1.87 kN/m
with a = 0.840 m and b = 0.500 m. Self weight of the slab (Cofradal 200) = 2 kN/m
Permanent loads (partition walls, finishing) = 1 kN/m
ACB design
A calculation using ACB software was performed. The results led
to a cellular beam made from an HD400*187 in S460 Histar
with an opening of 450 mm, a web post of 150 mm, and a total
height of 580 mm.
ANGELINA design
Test parameters The test shows that the measured results are in accordance with
In order to simulate the distributed load, four point loads were the numerical simulations performed with the SAFIR software
placed on the beam (Fig 7). (Fig 9).