Sie sind auf Seite 1von 12

ALPAXL Ver 1.

Axially loaded pile analysis tool

Circular pile

Developed by Hoyoung Seo


Advisor: Prof. Monica Prezzi
Pile geometry Soil properties
Depth to the Young's modulus
Pile diameter Br (m) 0.2 Layer i layer Hi (m) of the soil Esi (MPa)
Pile length Lp (m) 19 1 12 50

Young's modulus of
27 2 19 117
the pile Ep (GPa)

3 21 117

4 40 138

Soil layers 5

Number of soil layers


2 6
within the pile
Number of soil layers
2 7
below the pile base
8

Load 9

Load at the
542 10
pile head Qt (kN)
Output
Poisson's ratio Head settlement
3.61
of the soil si wt (mm)
Base settlement
0.3 0.13
wb (mm)
Base load
0.3 17
Qb (kN)

0.3 r 0.0227335

0.3
Original shear modulus

Modified shear modulus

Run 5 iterations
Qt (kN) = 542

Qb (kN) = 17
Original configuration

Deformed configuration

plot scale factor


5

Soil displacement was magnified by 200 times


for a better view.
0 100 200 300 400 500 600 0 2 4 6 8 10 12 14 16 18 20
0 0

0.5 0.5
pile head settlement (mm)

soil displacement (mm)


1 1

1.5 1.5

2 2

2.5 2.5

3 3 At the pile head

3.5 3.5 At the pile base

4 4
Axial load (kN) Radial distance from pile axis (m)

0 0.5 1 1.5 2 2.5 3 3.5 4 0 100 200 300 400 500 600
0 0

2 2

4 4
6 6
Depth (m)
Depth (m)

8 8
10 10
12 12
14 14
16 16
18 18
20 20
Pile displacement (mm) Axial load (kN)
8 10 12 14 16 18 20

At the pile head

At the pile base

ance from pile axis (m)

00 300 400 500 600

ial load (kN)


Layer Hi (m) ki (Pa) ti (N) i (m-1) ai (N/m) Bi (m) Ci (m)
1 12 2.25E+07 6.34E+07 0.152041 1.48E+08 -2.198E-05 3.634E-03
2 19 5.27E+07 1.48E+08 0.214624 2.46E+08 5.156E-07 5.824E-03
3 21 5.27E+07 1.48E+08 0.419880 1.26E+08 -6.748E-10 3.884E-01
4 40 6.22E+07 1.75E+08 0.419880 1.48E+08 0.000E+00 3.565E-01
msi (Nm) nsi (N/m) r
648.9 32.8 0.02273
18.0 1.4 0.02273
0.6 0.2 0.02273
0.1 0.1 0.02273
If ALPAXLVer 1.0 does not work properly, please check whether the Analysis TookPak add-in is intalled.

The installation procedures of the Analysis ToolPak are as follows:


1. On the Tools menu, click Add-Ins.

2. In the Add-Ins available list, select the Analysis ToolPak box, and then click OK.

3. Restart Microsoft Excel.


k add-in is intalled.

Das könnte Ihnen auch gefallen