Beruflich Dokumente
Kultur Dokumente
MOTOTRBO
XiR P8668/XiR P8660/GP338D
COLOUR DISPLAY PORTABLE
USER GUIDE
Identifying Radio Controls . . . . . . . . . . . . . . . . . . . . 6
Contents Radio Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . 8
Contents
This User Guide contains all the information you need to
use the MOTOTRBO XiR and GP Series Digital Portable Assignable Radio Functions . . . . . . . . . . . . . . . . . 8
Radios. Assignable Settings or Utility Functions . . . . . . . . . 9
Using the 4-Way Navigation Button . . . . . . . . . . . . 10
Important Safety Information . . . . . . . . . . . . . . . . . vi
Accessing the Programmed Functions . . . . . . . . . . 10
Product Safety and RF Exposure Compliance . . .vi
Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Push-To-Talk (PTT) Button . . . . . . . . . . . . . . . . . . . 12
Computer Software Copyrights . . . . . . . . . . . . . . . vii Switching Between Conventional Analog and Digital
Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Handling Precautions . . . . . . . . . . . . . . . . . . . . . . viii
IP Site Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Capacity Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . 1 Linked Capacity Plus . . . . . . . . . . . . . . . . . . . . . . . 14
What Your Dealer/System Administrator
Identifying Status Indicators . . . . . . . . . . . . . . . . . . 15
Can Tell You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Display Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Preparing Your Radio for Use . . . . . . . . . . . . . . . . . . 2 Call Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . 2 Advanced Menu Icons . . . . . . . . . . . . . . . . . . . . . . 18
Attaching the Battery . . . . . . . . . . . . . . . . . . . . . . . . . 3 Mini Notice Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Attaching the Antenna . . . . . . . . . . . . . . . . . . . . . . . . 3 Sent Item Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Attaching the Belt Clip . . . . . . . . . . . . . . . . . . . . . . . . 4 Bluetooth Device Icons . . . . . . . . . . . . . . . . . . . . . . 19
Attaching the Universal Connector Cover (Dust Cover) LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Indicator Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Powering Up the Radio . . . . . . . . . . . . . . . . . . . . . . . 5 Audio Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . 6
i
English
Making and Receiving Calls . . . . . . . . . . . . . . . . . . 22 Initiating Remote Monitor . . . . . . . . . . . . . . . . . . 36
Selecting a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Stopping Remote Monitor . . . . . . . . . . . . . . . . . . 37
Selecting a Channel . . . . . . . . . . . . . . . . . . . . . . . . 23 Scan Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Receiving and Responding to a Radio Call . . . . . . 24 Viewing an Entry in the Scan List . . . . . . . . . . . . 38
Receiving and Responding to a Group Call . . . . 24 Viewing an Entry in the Scan List by Alias Search 38
Receiving and Responding to a Private Call . . . 25 Editing the Scan List . . . . . . . . . . . . . . . . . . . . . . 39
Receiving an All Call . . . . . . . . . . . . . . . . . . . . . . 25 Adding a New Entry to the Scan List . . . . . . . . 39
Receiving and Responding to a Selective Call . . 26 Deleting an Entry from the Scan List . . . . . . . . 39
Making a Radio Call . . . . . . . . . . . . . . . . . . . . . . . . 27 Setting and Editing Priority for an Entry in the Scan
Making a Call with the Channel Selector Knob . . 27 List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Making a Group Call . . . . . . . . . . . . . . . . . . . . 27 Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Making a Private Call . . . . . . . . . . . . . . . . . . . 28 Starting and Stopping Scan . . . . . . . . . . . . . . . . 42
Making an All Call . . . . . . . . . . . . . . . . . . . . . . 29 Responding to a Transmission During a Scan . . 42
Making a Selective Call . . . . . . . . . . . . . . . . . 29 Deleting a Nuisance Channel . . . . . . . . . . . . . . . 43
Making a Group, Private or All Call with the Restoring a Nuisance Channel . . . . . . . . . . . . . . 43
Programmable Number Key . . . . . . . . . . . . . . . 30 Vote Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Stopping a Radio Call . . . . . . . . . . . . . . . . . . . . . . 31 Contacts Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Talkaround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Making a Group Call from Contacts . . . . . . . . . . 44
Monitoring Features . . . . . . . . . . . . . . . . . . . . . . . . 33 Making a Private Call from Contacts . . . . . . . . . 45
Contents
English
Activating or Deactivating Call Ringers for Call Alert Sending an Emergency Alarm with Call . . . . . . . 57
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Sending an Emergency Alarm with Voice to Follow
Activating or Deactivating Call Ringers for Private . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Contents
Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Reinitiating an Emergency Mode . . . . . . . . . . . . . 59
Activating or Deactivating Call Ringers for Selective Exiting Emergency Mode . . . . . . . . . . . . . . . . . . . 59
Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Text Message Features . . . . . . . . . . . . . . . . . . . . . 60
Activating or Deactivating Call Ringers for Text Writing and Sending a Text Message . . . . . . . . . 60
Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Sending a Quick Text Message . . . . . . . . . . . . . . 61
Activating or Deactivating Call Ringers for Telemetry Sending a Quick Text Message with the One Touch
Status with Text . . . . . . . . . . . . . . . . . . . . . . . . . 50 Access Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Assigning Ring Styles . . . . . . . . . . . . . . . . . . . . . 51 Accessing the Drafts Folder . . . . . . . . . . . . . . . . . 62
Escalating Alarm Tone Volume . . . . . . . . . . . . . . 51 Viewing a Saved Text Message . . . . . . . . . . . . 62
Call Log Features . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Editing and Sending a Saved Text Message . . 62
Viewing Recent Calls . . . . . . . . . . . . . . . . . . . . . . 52 Deleting a Saved Text Message from Drafts . . 63
Storing an Alias or ID from a Call List . . . . . . . . . 52 Managing Fail-to-Send Text Messages . . . . . . . . 63
Deleting a Call from a Call List . . . . . . . . . . . . . . 52 Resending a Text Message . . . . . . . . . . . . . . . 64
Viewing Details from a Call List . . . . . . . . . . . . . . 53 Forwarding a Text Message . . . . . . . . . . . . . . . 64
Call Alert Operation . . . . . . . . . . . . . . . . . . . . . . . . . 53 Editing a Text Message . . . . . . . . . . . . . . . . . . 64
Receiving and Responding to a Call Alert . . . . . . 53 Managing Sent Text Messages . . . . . . . . . . . . . . 65
Making a Call Alert from the Contacts List . . . . . . 54 Viewing a Sent Text Message . . . . . . . . . . . . . 65
Sending a Sent Text Message . . . . . . . . . . . . . 65
Making a Call Alert with the One Touch Access Button
Deleting All Sent Text Messages from Sent Items
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Emergency Operation . . . . . . . . . . . . . . . . . . . . . . . 55
Receiving a Text Message . . . . . . . . . . . . . . . . . 67
Receiving an Emergency Alarm . . . . . . . . . . . . . 55
Reading a Text Message . . . . . . . . . . . . . . . . . . . 67
Responding to an Emergency Alarm . . . . . . . . . . 56
Managing Received Text Messages . . . . . . . . . . 68
Sending an Emergency Alarm . . . . . . . . . . . . . . . 56 iii
English
Viewing a Text Message from the Inbox . . . . . 68 Turning the Password Lock On or Off . . . . . . . . . 80
Viewing a Telemetry Status Text Message from the Changing the Password . . . . . . . . . . . . . . . . . . . 81
Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Bluetooth Operation . . . . . . . . . . . . . . . . . . . . . . . . 82
Replying to a Text Message from the Inbox . . 69 Finding and Connecting to a Bluetooth Device . . 82
Deleting a Text Message from the Inbox . . . . . 69 Disconnecting from a Bluetooth Device . . . . . . . 83
Deleting All Text Messages from the Inbox . . . 70 Switching Audio Route . . . . . . . . . . . . . . . . . . . . 83
Analog Message Encode . . . . . . . . . . . . . . . . . . . 71 Viewing Device Details . . . . . . . . . . . . . . . . . . . . 84
Sending MDC Message Encode to Dispatcher . . 71
Editing Device Name . . . . . . . . . . . . . . . . . . . . . 84
Sending 5-Tone Message Encode to Contact . . 71 Notification List . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Analog Status Update . . . . . . . . . . . . . . . . . . . . . . 72 Accessing the Notification List . . . . . . . . . . . . . . 85
Sending Status Update to Predefined Contact . . 72
Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Viewing 5-Tone Status Details . . . . . . . . . . . . . . 72 Turning the Radio Tones/Alerts On or Off . . . . . 85
Editing 5-Tone Status Details . . . . . . . . . . . . . . . 72 Turning Keypad Tones On or Off . . . . . . . . . . . . 86
Privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Setting the Tone Alert Volume Offset Level . . . . 86
Dual Tone Multi Frequency (DTMF) . . . . . . . . . . . . 74 Turning the Talk Permit Tone On or Off . . . . . . . 87
Multi-Site Controls . . . . . . . . . . . . . . . . . . . . . . . . . 75 Setting the Power Level . . . . . . . . . . . . . . . . . . . 87
Starting an Automatic Site Search . . . . . . . . . . . 75
Changing the Display Mode . . . . . . . . . . . . . . . . 88
Stopping an Automatic Site Search . . . . . . . . . . 75 Adjusting the Display Brightness . . . . . . . . . . . . 88
Starting a Manual Site Search . . . . . . . . . . . . . . 76 Controlling the Display Backlight . . . . . . . . . . . . 88
Contents
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Setting the Squelch Level . . . . . . . . . . . . . . . . . 89
Radio Disable . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Turning the Introduction Screen On or Off . . . . . 89
Radio Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Locking and Unlocking the Keypad . . . . . . . . . . . 90
Lone Worker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Password Lock Features . . . . . . . . . . . . . . . . . . . . 79
Turning the LED Indicator On or Off . . . . . . . . . . 91
Accessing the Radio from Password . . . . . . . . . 79 Turning the Voice Operating Transmission (VOX)
iv Unlocking the Radio from Locked State . . . . . . . 80
English
Feature On or Off . . . . . . . . . . . . . . . . . . . . . . . . . 91 Earbuds and Earpieces . . . . . . . . . . . . . . . . . . . . . 101
Turning the Option Board Feature(s) On or Off . . 92 Remote Speaker Microphones . . . . . . . . . . . . . . . 102
Identifying Cable Type . . . . . . . . . . . . . . . . . . . . . 92 Surveillance Accessories . . . . . . . . . . . . . . . . . . . 102
Contents
Voice Announcement . . . . . . . . . . . . . . . . . . . . . . 92 Miscellaneous Accessories . . . . . . . . . . . . . . . . . . 103
Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Menu Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Analog Mic AGC . . . . . . . . . . . . . . . . . . . . . . . . . 93
Digital Mic AGC . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Intelligent Audio . . . . . . . . . . . . . . . . . . . . . . . . . . 94
GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Accessing General Radio Information . . . . . . . . . 95
Accessing the Battery Information . . . . . . . . . . 96
Checking the Radio Alias and ID . . . . . . . . . . . 96
Checking the Firmware Version and Codeplug Ver-
sion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Checking the GPS Information . . . . . . . . . . . . . 97
Front Panel Programming (FPP) . . . . . . . . . . . . . . 98
Entering FPP Mode . . . . . . . . . . . . . . . . . . . . . . . 98
Editing FPP Mode Parameters . . . . . . . . . . . . . . 98
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Carry Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Headsets and Headset Accessories . . . . . . . . . . . 100
v
English
For Models that are available in Thailand:
Important Safety Information
Software Version
Important Safety Information
vi
English
The AMBE+2TM voice coding Technology embodied in
Computer Software Copyrights this product is protected by intellectual property rights
including patent rights, copyrights and trade secrets of
vii
English
Never poke the vent (hole) located on the radio chassis
Handling Precautions below the battery contact. This vent allows for pressure
equalization in the radio. Doing so may create a leak
The MOTOTRBO Series Digital Portable radio meets path into the radio and the radios submersibility may
IP57 specifications, allowing the radio to withstand be lost.
adverse field conditions such as being submersed in
Never obstruct or cover the vent, even with a label.
water.
Ensure that no oily substances come in contact with the
If the radio has been submersed in water, shake the vent.
radio well to remove any water that may be trapped
inside the speaker grille and microphone port. Trapped The radio with antenna attached properly is designed to
water could cause decreased audio performance. be submersible to a maximum depth of 1 meter (3.28
feet) and a maximum submersion time of 30 minutes.
If the radios battery contact area has been exposed to Exceeding either maximum limit or use without antenna
water, clean and dry battery contacts on both the radio may result in damage to the radio.
Handling Precautions
viii
English
For features that are available in both conventional Analog and
Getting Started Digital modes, no icon is shown.
For features that are available in a conventional multi-site
Getting Started
Take a moment to review the following:
mode, see IP Site Connect on page 13 for more information.
How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . page 1
What Your Dealer/System Administrator Selected features are also available on the single-site trunking
Can Tell You. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1 mode, Capacity Plus. See Capacity Plus on page 14 for more
information.
Selected features are also available in the multi-site trunking
How to Use This Guide
mode, Linked Capacity Plus. See Linked Capacity Plus on
page 14 for more information.
This User Guide covers the basic operation of the MOTOTRBO
Portables.
However, your dealer or system administrator may have What Your Dealer/System Administrator
customized your radio for your specific needs. Check with your Can Tell You
dealer or system administrator for more information.
You can consult your dealer or system administrator about the
Throughout this publication, the icons below are used to
following:
indicate features supported in either the conventional Analog
mode or conventional Digital mode: Is your radio programmed with any preset conventional
channels?
Indicates a conventional Analog Mode-Only feature. Which buttons have been programmed to access other
features?
Indicates a conventional Digital Mode-Only feature. What optional accessories may suit your needs?
What are the best radio usage practices for effective
communication?
What maintenance procedures will help promote longer radio
life? 1
English
NOTE: Specifications may vary for different radio models. Charging the Battery
Check with your dealer or system administrator for
more information. For best performance, your radio is powered by a
Motorola-approved Nickel Metal-Hydride (NiMH) or Lithium-Ion
(Li-lon) battery. To avoid damage and comply with warranty
Preparing Your Radio for Use terms, charge the battery using a Motorola charger exactly as
described in the charger user guide.
Assemble your radio by following these steps:
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2 Charge a new battery 14 to 16 hours before initial use for best
performance.
Preparing Your Radio for Use
English
Attaching the Battery Attaching the Antenna
Align the battery with the rails on the back of the radio. Press With the radio turned off, set the antenna in its receptacle and
English
Attaching the Belt Clip Attaching the Universal Connector Cover
(Dust Cover)
Align the grooves on the clip The universal connector is located on the antenna side of the
with those on the battery and radio. It is used to connect MOTOTRBO accessories to the
press downward until you hear radio.
a click. Insert the hooked end of the
Universal
cover into the slots above
To remove the clip, press the Connector the universal connector.
Preparing Your Radio for Use
English
Powering Up the Radio NOTE: The Home screen does not light up during a power up if
the LED indicator is disabled (see Turning the LED
Indicator On or Off on page 91).
Rotate the On/Off/Volume
English
Adjusting the Volume
Identifying Radio Controls
To increase the volume,
Take a moment to review the following:
turn the On/Off/Volume
Control Knob clockwise. Radio Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . . . page 8
To decrease the volume,
Using the 4-Way Navigation Button . . . . . . . . . . . . . . . page 10
turn this knob
counterclockwise. Accessing the Programmed Functions . . . . . . . . . . . . page 10
Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11
NOTE: Your radio can be Push-To-Talk (PTT) Button . . . . . . . . . . . . . . . . . . . . . page 12
programmed to Switching Between Conventional Analog and
Identifying Radio Controls
English
Radio Controls 4 Side Button 1**
English
Programmable Buttons Voice Announcement for Channel Plays zone and channel
announcement voice messages for the current channel. This
Your dealer can program the programmable buttons as function is unavailable when Voice Announcement is disabled.
shortcuts to radio functions or preset channels/groups Emergency Depending on the programming, initiates or
depending on the duration of a button press: cancels an emergency alarm or call.
Short press Pressing and releasing rapidly. Intelligent Audio On/Off Toggles Intelligent Audio on or off.
Long press Pressing and holding for the programmed Manual Dial Initiates a call by keying in any subscriber
duration.
ID.
Hold down Keeping the button pressed.
Manual Site Roam* Starts the manual site search.
Identifying Radio Controls
Call Alert Provides direct access to the contacts list for you to Option Board Feature Toggles option board feature(s) on or
select a contact to whom a Call Alert can be sent. off for option board-enabled channels.
English
Permanent Monitor* Monitors a selected channel for all Transmit Interrupt Remote Dekey Stops the
radio traffic until function is disabled. transmission of a remote monitored radio without giving any
indicators, or an ongoing interruptible call to free the channel.
disabled.
Assignable Settings or Utility Functions
Remote Monitor Turns on the microphone of a target
radio without it giving any indicators. All Tones/Alerts Toggles all tones and alerts on or off.
Repeater/Talkaround* Toggles between using a repeater Backlight On/Off Toggles display backlight on or off.
and communicating directly with another radio. Backlight Brightness Adjusts the brightness level.
Scan* Toggles scan on or off. Display Mode Toggles the day/night display mode on or off.
Site Lock On/Off* Toggles the automatic site roam on or Keypad Lock Toggles keypad between locked and unlocked.
off. Power Level Toggles transmit power level between high and
Status Selects the status list menu. low.
Telemetry Control Controls the Output Pin on a local or Squelch Toggles squelch level between tight and
remote radio. normal.
English
Using the 4-Way Navigation Button Accessing the Programmed Functions
You can use the 4-way navigation button, e, to scroll through You can access various radio functions through one of the
following ways:
options, increase/decrease values, and navigate vertically.
A short or long press of the
ed
Category ^ or v < or > relevant programmable buttons.
Menu
Lists
Vertical Navigation
Vertical Navigation
OR c
Use the 4-way navigation button as follows:
View Details Vertical Navigation Previous/Next Item
1 To access the menu, press the c button. Press the
Identifying Radio Controls
You can use the 4-way navigation button, e, as a number, appropriate direction of the e to access the menu
alias, or free form text editor. functions.
Editor Category ^ or v < or > 2 To select a function or enter a sub-menu, press the c
button.
Left: Delete last digit
Number
Right: 3 To go back one menu level, or to return to the previous
Move cursor one screen, press the d button. Long press the d button to
Alias return to the Home screen.
character left/right
Move cursor up/ Move cursor one
Free Form Text NOTE: Your radio automatically exits the menu after a period
down character left/right
of inactivity and returns to your Home screen.
Numeric Values Increase/Decrease
10
English
Using the Keypad
1 1 . , ? ! @ & % - : * #
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N O 6
7 P Q R S 7
8 T U V 8
9 W X Y Z 9
0 0 NOTE: Press to enter 0 and long press to activate the CAPS lock. Another long press to turn off the CAPS lock.
* * or del NOTE: Press during text entry to delete the character. Press during numeric entry to enter a *.
# # or space NOTE: Press during text entry to insert a space. Press during numeric entry to enter a #.
11
English
Push-To-Talk (PTT) Button If the Talk Permit Tone (see Turning the Talk Permit Tone On
or Off on page 87) or the PTT Sidetone is enabled, wait
The PTT button on the side of the radio serves two basic until the short alert tone ends before talking.
purposes:
During a call, if the Channel Free Indication feature is
enabled on your radio (programmed by your dealer), you
hear a short alert tone the moment the target radio (the
radio that is receiving your call) releases the PTT button,
indicating the channel is free for you to respond.
Press and hold down PTT button to talk. Release the PTT
button to listen.
12
English
Switching Between Conventional Analog IP Site Connect
and Digital Mode
This feature allows your radio to extend conventional
English
NOTE: You cannot manually add or delete an entry to the roam Linked Capacity Plus
list. Check with your dealer or system administrator for
more information.
Linked Capacity Plus is a multi-site multi-channel trunking
configuration of the MOTOTRBO radio system, combining the
Capacity Plus best of both Capacity Plus and IP Site Connect configurations.
Linked Capacity Plus allows your radio to extend trunking
Capacity Plus is a single-site trunking configuration of the communication beyond the reach of a single site, by connecting
MOTOTRBO radio system, which uses a pool of channels to to different available sites which are connected via an Internet
support hundreds of users and up to 254 Groups. This feature Protocol (IP) network. It also provides an increase in capacity by
allows your radio to efficiently utilize the available number of efficiently utilizing the combined available number of
programmed channels while in Repeater Mode. programmed channels supported by each of the available sites.
Identifying Radio Controls
Icons of features not applicable to Capacity Plus are not When the radio moves out of range from one site and into the
available in the menu. You hear a negative indicator tone if you range of another, it connects to the new site's repeater to send
try to access a feature not applicable to Capacity Plus via a or receive calls/data transmissions. Depending on your settings,
programmable button press. this is done automatically or manually.
Your radio also has features that are available in conventional If the radio is set to do this automatically, it scans through all
digital mode, IP Site Connect, Capacity Plus and Linked available sites when the signal from the current site is weak or
Capacity Plus. However, the minor differences in the way each when the radio is unable to detect any signal from the current
feature works does NOT affect the performance of your radio. site. It then locks on to the repeater with the strongest Received
Check with your dealer or system administrator for more Signal Strength Indicator (RSSI) value.
information on this configuration. In a manual site search, the radio searches for the next site in
the roam list that is currently in range (but which may not have
the strongest signal) and locks on to it.
Any channel with Linked Capacity Plus enabled can be added
to a particular roam list. The radio searches these channels
during the automatic roam operation to locate the best site.
14
English
NOTE: You cannot manually add or delete an entry to the
roam list. Check with your dealer or system Identifying Status Indicators
administrator for more information.
15
English
Display Icons Notification
Notification List has one or more missed events.
The 132 x 90 pixels, 256 colors, liquid crystal display (LCD) of
Scan*
your radio shows radio status, text entries, and menu entries.
Scan feature is enabled.
The following are icons that appear on the status bar at the top
of the radios display. Icons are displayed on the status bar, Scan Priority 1*
arranged left-to-right, in order of appearance/usage and are Radio detects activity on channel/group designated
channel specific. as Priority 1).
Scan Priority 2*
Received Signal Strength Indicator (RSSI)
Identifying Status Indicators
English
Unsecure Call Icons
The Privacy feature is disabled.
The following icons appear on the radios display during a call.
17
English
Advanced Menu Icons Mini Notice Icons
The following icons appear beside menu items that offer a The following icons appear momentarily on the radios display
choice between two options or as an indication that there is a after an action to perform task is taken.
sub-menu offering two options.
Successful Transmission (Positive)
Checkbox (Empty) Successful action taken.
Indicates the option is not selected.
Failed Transmission (Negative)
Checkbox (Checked) Failed action taken.
Identifying Status Indicators
18
English
Sent Item Icons Bluetooth Device Icons
The following icons also appear next to items in the list of
19
English
LED Indicator Blinking yellow Radio is scanning for activity or receiving a
Call Alert, or all local Linked Capacity Plus channels are busy.
The LED indicator shows the operational status of your radio. Double blinking yellow Radio is no longer connected to the
repeater while in Capacity Plus or Linked Capacity Plus, all
LED Indicator Capacity Plus channels or Linked Capacity Plus channels are
currently busy, Auto Roaming is enabled, radio is actively
searching for a new site. Also indicates radio has yet to respond
to a group call alert, or radio is locked.
English
Indicator Tones Audio Tones
Alert tones provide you with audible indications of the radios
21
English
Selecting a Zone
Making and Receiving Calls
A zone is a group of channels. Your radio supports up to 1000
Once you understand how your MOTOTRBO Portable is
channels and 250 zones, with a maximum of 160 channels per
configured, you are ready to use your radio.
zone.
Use this navigation guide to familiarize yourself with the basic
Use the following procedure to select a zone.
Call features:
Selecting a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22 Procedure:
Selecting a Radio Channel, Subscriber ID, Press the programmed Zone button and proceed to Step 3.
or Group ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 24 OR
Making and Receiving Calls
English
results. Selecting a Channel
The alias search is case-insensitive. If there are two or more
zones with the same name, the radio displays the zone that Transmissions are sent and received on a channel. Depending
Procedure:
Turn the Channel Selector Knob to select the channel with the
active group alias or ID.
23
English
Receiving and Responding to a Radio Call Receiving and Responding to a Group Call
To receive a call made to a group of users, your radio must be
Once the channel, subscriber
LED Indicator
configured as part of that group.
ID or group ID is displayed,
you can proceed to receive Procedure:
and respond to calls. When you receive a Group Call (while on the Home screen):
The LED lights up solid green 1 The LED blinks green.
while the radio is transmitting
2 The Group Call icon appears in the top right corner. The first
and blinks green when the
text line shows the caller alias. The second text line displays
radio is receiving.
Making and Receiving Calls
the group call alias. Your radio unmutes and the incoming
NOTE: The LED lights up solid green while the radio is call sounds through the radio's speaker.
transmitting and double blinks green when the radio is 3 To respond, hold the radio vertically 1 to 2 inches (2.5 to 5.0
receiving a privacy-enabled call. cm) from your mouth.
To unscramble a privacy-enabled call, your radio must
have the same Privacy Key, OR the same Key Value 4 If the Channel Free Indication feature is enabled, you
and Key ID (programmed by your dealer), as the hear a short alert tone the moment the transmitting radio
transmitting radio (the radio you are receiving the call releases the PTT button, indicating the channel is free for
from). you to respond.
Press the PTT button to respond to the call.
See Privacy on page 73 for more information. OR
If the Voice Interrupt feature is enabled, press the PTT
button to stop the current call from the transmitting radio and
free the channel for you to talk/respond.
24
English
5 The LED lights up solid green. 4 If the Channel Free Indication feature is enabled, you hear a
short alert tone the moment the transmitting radio releases
6 Wait for the Talk Permit Tone to finish (if enabled) and speak the PTT button, indicating the channel is free for you to
English
Procedure: Procedure:
When you receive an All Call: When you receive a Selective Call:
1 A tone sounds and the LED blinks green. 1 The LED blinks green.
2 The Group Call icon appears in the top right corner. The first 2 The Private Call icon appears in the top right corner. The
text line shows the caller alias. The second text line displays first text line shows the caller alias or Selective Call or
All Call. Your radio unmutes and the incoming call Alert with Call. Your radio unmutes and the incoming
sounds through the radio's speaker. call sounds through the radio's speaker.
3 Once the All Call ends, the radio returns to the previous 3 To respond, hold the radio vertically 1 to 2 inches (2.5 to 5.0
screen before receiving the call. An All Call does not wait for cm) from your mouth.
Making and Receiving Calls
English
Making a Radio Call feature can be assigned to a short or long
programmable button press.You can ONLY have one
After selecting your channel, you can select a subscriber alias ID assigned to a One Touch Access button. Your
English
5 Release the PTT button to listen.When the target radio You hear a negative indicator tone, when you make a Private
responds, the LED blinks green. You see the Group Call Call via the Contacts list, Call Log, One Touch Access button,
icon, the group alias or ID, and transmitting radio alias or ID the programmed number keys, or the Channel Selector Knob,
on your display. if this feature is not enabled.
6 If the Channel Free Indication feature is enabled, you Use the Text Message or Call Alert features to contact an
hear a short alert tone the moment the target radio releases individual radio. See Text Message Features on page 60 or
the PTT button, indicating the channel is free for you to Call Alert Operation on page 53 for more information.
respond. Press the PTT button to respond. Procedure:
OR
If there is no voice activity for a predetermined period of 1 Select the channel with the active subscriber alias or ID.
Making and Receiving Calls
English
Press the PTT button to respond. Procedure:
OR
1 Select the channel with the active All Call group alias or ID.
If there is no voice activity for a predetermined period of
See Selecting a Channel on page 23.
This feature allows you to transmit to all users on the channel. Procedure:
Your radio must be programmed to allow you to use this 1 Select the channel with the active subscriber alias or ID.
feature.
See Selecting a Channel on page 23.
29
English
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from Making a Group, Private or All Call with the
your mouth.
Programmable Number Key
3 Press the PTT button to make the call. The LED lights up The Programmable Number Key feature allows you to make a
solid green. The Private Call icon appears in the top right
Group, Private or All Call to a predefined alias or ID easily. This
corner. The first text line shows the subscriber alias. The
feature can be assigned to all the available number keys on a
second text line displays the call status.
keypad.
4 Wait for the Talk Permit Tone to finish (if enabled) and You can ONLY have one alias or ID assigned to a number key,
speak clearly into the microphone.
but you can have more than one number key associated to an
OR
alias or ID.
Wait for the PTT Sidetone to finish (if enabled) and speak
Making and Receiving Calls
30
English
4 Wait for the Talk Permit Tone to finish (if enabled) and speak Stopping a Radio Call
clearly into the microphone.
OR This feature allows you to stop an ongoing Group or Private Call
31
English
Talkaround 5 Press c to enable Talkaround. The display shows 9
beside Enabled.
You can continue to communicate when your repeater is not OR
operating, or when your radio is out of the repeaters range but Press c to disable Talkaround. The 9 disappears from
within talking range of other radios. beside Enabled.
This is called talkaround. 6 The screen automatically returns to the previous menu.
NOTE: This feature is not applicable in Capacity Plus and The Talkaround setting is retained even after powering down.
Linked Capacity Plus.
NOTE: At Step 4, you can also use < or > to change the
Making and Receiving Calls
32
English
Monitoring Features Permanent Monitor
Use the Permanent Monitor feature to continuously monitor a
Use the Monitor feature to make sure a channel is clear before NOTE: This feature is not applicable in Capacity Plus and
transmitting. Linked Capacity Plus.
2 The monitor icon appears on the status bar and the LED 3 Press the programmed Permanent Monitor button to exit
lights up solid yellow. Permanent Monitor mode.
3 You hear radio activity or total silence, depending on how 4 Radio sounds an alert tone, the LED turns off, and display
your radio is programmed. shows Permanent Monitor Off.
4 When you hear white noise (that is, the channel is free),
press the PTT button to talk and release it to listen.
33
English
Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 85
Advanced Features Front Panel Programming (FPP) . . . . . . . . . . . . . . . . . page 98
English
Radio Check 5 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
If enabled, this feature allows you to determine if another radio OR
Advanced Features
is active in a system without disturbing the user of that radio. No If unsuccessful, a negative indicator tone sounds and the
audible or visual notification is shown on the target radio. display shows negative mini notice.
This feature is only applicable for subscriber aliases or IDs. 6 Radio returns to the subscriber alias or ID screen.
OR
Sending a Radio Check
Procedure:
Procedure:
Use the menu.
Use the programmed Radio Check button.
1 c to access the menu.
1 Press the programmed Radio Check button.
2 ^ or v to the required subscriber alias or ID and press c 2 ^ or v to Contacts and press c to select.
to select. 3 ^ or v to the required subscriber alias or ID and press c
3 The display shows transitional mini notice, indicating the to select.
request is in progress. The LED lights up solid green. OR
^ or v to Manual Dial and press c to select.
4 Wait for acknowledgement.
If there was previously dialed ID, the ID appears along with
a blinking cursor. Use the keypad to edit the ID. Press c to
select.
OR
^ or v to Manual Dial and press c to select.
Key in the subscriber alias or ID and press c.
English
5 The display shows transitional mini notice, indicating the Remote Monitor
request is in progress. The LED lights up solid green.
6 Wait for acknowledgement. Use the Remote Monitor feature to turn on the microphone of a
target radio (subscriber alias or IDs only). No audible or visual
7 If successful, a positive indicator tone sounds and the indication is given to the target radio. You can use this feature to
display shows positive mini notice. monitor, remotely, any audible activity surrounding the target
OR radio.
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice. Your radio must be programmed to allow you to use this feature.
English
If unsuccessful, a negative indicator tone sounds and the 7 If successful, a positive indicator tone sounds and the
display shows negative mini notice. display shows positive mini notice. Your radio starts playing
audio from the monitored radio for a programmed duration
Advanced Features
OR and display shows Rem. Monitor.
Procedure: Once the timer expires, the radio sounds an alert tone and
Use the menu. the LED turns off.
OR
1 c to access the menu. If unsuccessful, the radio sounds a negative indicator tone
the display shows negative mini notice.
2 ^ or v to Contacts and press c to select.
3 ^ or v to the required subscriber alias or ID and press c Stopping Remote Monitor
to select. Remote Monitor automatically stops after a programmed
OR duration or when there is any user operation on the target radio.
^ or v to Manual Dial and press c to select.
Procedure:
If there was previously dialed ID, the ID appears along with
a blinking cursor. Use the keypad to edit the ID. Press c to
1 Press the programmed Transmit Interrupt Remote Dekey
button.
select.
OR 2 The display shows transitional mini notice, indicating the
^ or v to Manual Dial and press c to select. request is in progress. The LED lights up solid green.
Key in the subscriber alias or ID and press c to select. 3 Wait for acknowledgment.
4 ^ or v to Remote Mon. and press c to select. 4 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
5 The display shows transitional mini notice, indicating the OR
request is in progress. The LED lights up solid green. If unsuccessful, a negative indicator tone sounds and the
6 Wait for acknowledgment. display shows negative mini notice.
37
English
Scan Lists channel list. You cannot have multiple Priority 1 or Priority 2
channels in a scan list.
Scan lists are created and assigned to individual channels/ There is no priority icon if priority is set to None.
groups. Your radio scans for voice activity by cycling through the
channel/group sequence specified in the scan list for the current Viewing an Entry in the Scan List by Alias Search
channel/group.
Procedure:
Your radio can support up to 250 scan lists, with a maximum of
16 members in a list. Each scan list supports a mixture of both 1 c to access the menu.
analog and digital entries.
2 ^ or v to Scan and press c to select.
You can add, delete, or prioritize channels by editing a scan list.
3 ^ or v to Scan List and press c to select.
You can attach a new scan list to your radio via Front Panel
Programming. 4 Key in the first character of the required alias.
NOTE: This feature is not applicable in Capacity Plus and 5 A blinking cursor appears.
Advanced Features
Linked Capacity Plus. Use the keypad to type the required alias.
Press < to move one space to the left.
Viewing an Entry in the Scan List
Press > to move one space to the right.
Procedure: Press the *DEL key to delete any unwanted characters.
1 c to access the menu. 6 The first line of the display shows the characters you keyed
in. The next lines of the display show the shortlisted search
2 ^ or v to Scan and press c to select. results.
3 ^ or v to Scan List and press c to select. The alias search is case-insensitive. If there are two or more
4 Use ^ or v to view each member on the list. entries with the same name, the radio displays the entry that is
listed first in the scan list.
The priority icon appears left of the members alias, if set, to
38 indicate whether the member is on a Priority 1 or Priority 2
English
Editing the Scan List 8 Press c to select.
Adding a New Entry to the Scan List 9 ^ or v to the required priority level and press c to select.
Advanced Features
Procedure: 10 The display shows positive mini notice, followed
immediately by Add Another?.
1 c to access the menu.
11 ^ or v to Yes and press c to select, to add another
2 ^ or v to Scan and press c to select. entry, and repeat Steps 5 to 9.
OR
3 ^ or v to Scan List and press c to select.
^ or v to No and press c to select to save the current
4 ^ or v to Add Member and press c to select. list.
English
Press > to move one space to the right. Setting and Editing Priority for an Entry in the Scan
Press the *DEL key to delete any unwanted characters. List
6 The first line of the display shows the characters you keyed Procedure:
in. The next lines of the display show the shortlisted search 1 c to access the menu.
results.
The alias search is case-insensitive. If there are two or more 2 ^ or v to Scan and press c to select.
entries with the same name, the radio displays the entry that
is listed first in the scan list. 3 ^ or v to Scan List and press c to select.
7 Press c to select. 4 ^ or v to the required alias or ID and proceed to Step 7.
OR
8 ^ or v to Delete and press c to select. Key in the first character of the required alias.
9 At Delete Entry?, ^ or v to Yes and press c to select, 5 A blinking cursor appears.
to delete the entry. The display shows positive mini notice. Use the keypad to type the required alias.
OR Press < to move one space to the left.
Advanced Features
^ or v to No and press c to select to return to the Press > to move one space to the right.
previous screen.
Press the *DEL key to delete any unwanted characters.
10 Repeat Steps 4 to 9 to delete other entries. 6 The first line of the display shows the characters you keyed
in. The next lines of the display show the shortlisted search
After deleting all required aliases or IDs, long press d to return
results.
to the Home screen. The alias search is case-insensitive. If there are two or more
entries with the same name, the radio displays the entry that
is listed first in the scan list.
7 Press c to select.
40
English
8 ^ or v to Edit Priority and press c to select. Scan
9 ^ or v to the required priority level and press c to select. When you start a scan, your radio cycles through the
Advanced Features
10 The display shows positive mini notice before returning to programmed scan list for the current channel looking for voice
the previous screen. activity.
11 The priority icon appears left of the members name. The LED blinks yellow and the scan icon appears on the status
bar.
There is no priority icon if priority is set to None. During a dual mode scan, if you are on a digital channel, and
your radio locks onto an analog channel, it automatically
switches from digital mode to analog mode for the duration of
the call. This is also true for the reverse.
There are two ways of initiating scan:
Main Channel Scan (Manual): Your radio scans all the
channels/groups in your scan list. On entering scan, your
radio may depending on the settings automatically start
on the last scanned active channel/group or on the channel
where scan was initiated.
Auto Scan (Automatic): Your radio automatically starts
scanning when you select a channel/group that has Auto
Scan enabled.
NOTE: This feature is not applicable in Capacity Plus and
Linked Capacity Plus.
41
English
Starting and Stopping Scan Responding to a Transmission During a Scan
Procedure: During scanning, your radio stops on a channel/group where
Press the programmed Scan button to start or stop Scan. activity is detected. The radio stays on that channel for a
OR programmed time period known as hang time.
Follow the procedure below.
Procedure:
1 Use the Channel Selector Knob to select a channel 1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
programmed with a scan list.
your mouth.
2 c to access the menu. If the Channel Free Indication feature is enabled, you
hear a short alert tone the moment the transmitting radio
3 ^ or v to Scan and press c to select. releases the PTT button, indicating the channel is free for
you to respond.
4 ^ or v to Scan State and press c to select.
2 Press the PTT button during hang time. The LED lights up
5 ^ or v to required scan state and press c to select. solid green.
Advanced Features
6 The display shows Scan On when scan is enabled. The LED 3 Wait for the Talk Permit Tone to finish (if enabled) and speak
blinks yellow and the scan icon appears. clearly into the microphone.
OR OR
The display shows Scan Off if scan is disabled. The LED
Wait for the PTT Sidetone to finish (if enabled) and
turns off and the scan icon disappears.
speak clearly into the microphone.
While scanning, the radio can only accept data (e.g. text
4 Release the PTT button to listen.
message, location, telemetry, or PC data) if received on its
Selected Channel. 5 If you do not respond within the hang time, the radio returns
to scanning other channels/groups.
42
English
Deleting a Nuisance Channel Vote Scan
If a channel continually generates unwanted calls or noise
Vote Scan provides you with wide area coverage in areas where
Advanced Features
(termed a nuisance channel), you can temporarily remove the
unwanted channel from the scan list. there are multiple base stations transmitting identical
information on different analog channels.
This capability does not apply to the channel designated as the
Selected Channel. Your radio scans analog channels of multiple base stations and
performs a voting process to select the strongest received
Procedure: signal. Once that is established, your radio unmutes to
1 When your radio locks on to an unwanted or nuisance transmissions from that base station.
channel, press the programmed Nuisance Channel Delete The LED blinks yellow and the vote scan icon appears on the
button until you hear a tone.
status bar.
2 Release the Nuisance Channel Delete button. The To respond to a transmission during a Vote Scan, follow the
nuisance channel is deleted. same procedures as Responding to a Transmission During a
Deleting a nuisance channel is only possible through the Scan on page 42.
programmed Nuisance Channel Delete button. This feature is
not accessible through the menu.
English
Contacts Settings Each entry within Contacts displays the following information:
Call Type
Contacts provides address-book capabilities on your radio. Call Alias
Each entry corresponds to an alias or ID that you use to initiate
a call. Call ID
Each entry, depending on context, associates with one of five NOTE: You can add, or edit subscriber IDs for the Digital
types of calls: Group Call, Private Call, All Call, PC Call or Contacts list. Deleting subscriber IDs can only be
Dispatch Call. performed by your dealer.
PC Call and Dispatch Call are data-related. They are only For the Analog Contacts list, you can only view the
available with the applications. Refer to the data applications subscriber IDs, edit the subscriber IDs, and initiate a
documentation for more information. Call Alert. Adding and deleting capabilities can only be
performed by your dealer.
NOTE: If the Privacy feature is enabled on a channel, you
can make privacy-enabled Group Call, Private Call, Making a Group Call from Contacts
and All Call on that channel. Only target radios with
Advanced Features
the same Privacy Key OR the same Key Value and Procedure:
Key ID as your radio are able to unscramble the
1 c to access the menu.
transmission.
See Privacy on page 73 for more information. 2 ^ or v to Contacts and press c to select.The entries
are alphabetically sorted.
Additionally, Contacts menu allows you to assign each entry to a
programmable number key or more on a keypad. If an entry is 3 ^ or v to the required group alias or ID.
assigned to a number key, your radio can perform a quick dial
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
on the entry. your mouth.
Your radio supports two Contacts lists, one for Analog contacts 5 Press the PTT button to make the call. The LED lights up
and one for Digital contacts, with a maximum of 500 members solid green.
for each Contacts list.
44
English
6 Wait for the Talk Permit Tone to finish (if enabled) and speak If there was previously dialed subscriber alias or ID, the
clearly into the microphone. alias or ID appears along with a blinking cursor.
OR Use the keypad to edit the ID.
Advanced Features
Wait for the PTT Sidetone to finish (if enabled) and OR
speak clearly into the microphone. ^ or v to Manual Dial and press c to select.
Use the keypad to enter a new subscriber alias or ID.
7 Release the PTT button to listen. When any user in the
group responds, the LED blinks green. You see the Group 4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
Call icon, the group ID, and that users ID on your display. your mouth.
8 If the Channel Free Indication feature is enabled, you 5 Press the PTT button to make the call. The LED lights up
hear a short alert tone the moment the target radio releases solid green. The display shows the destination alias.
the PTT button, indicating the channel is free for you to
6 Wait for the Talk Permit Tone to finish (if enabled) and speak
respond. Press the PTT button to respond.
clearly into the microphone.
OR
If there is no voice activity for a programmed period of time, 7 Release the PTT button to listen. When the target radio
the call ends. responds, the LED blinks green and the display shows the
transmitting user's ID.
Making a Private Call from Contacts
8 If the Channel Free Indication feature is enabled, you hear a
Procedure: short alert tone the moment the target radio releases the
1 c to access the menu. PTT button, indicating the channel is free for you to respond.
Press the PTT button to respond.
2 ^ or v to Contacts and press c to select.The entries OR
are alphabetically sorted. If there is no voice activity for a programmed period of time,
the call ends.
3 ^ or v to the required subscriber alias or ID.
9 You hear a short tone. The display shows Call Ended.
OR
^ or v to Manual Dial and press c to select.
45
English
Making a Call by Alias Search 7 Press the PTT button to make the call. The LED lights up
solid green. The display shows the destination alias.
You can also use alias or alphanumeric search to retrieve the
required subscriber alias. 8 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
This feature is only applicable while in Contacts.
9 Release the PTT button to listen. When the target radio
Procedure:
responds, the LED blinks green.
1 c to access the menu.
10 If the Channel Free Indication feature is enabled, you hear a
2 ^ or v to Contacts and press c to select. The entries short alert tone the moment the target radio releases the
are alphabetically sorted. PTT button, indicating the channel is free for you to respond.
Press the PTT button to respond.
3 Key in the first character of the required alias. OR
If there is no voice activity for a programmed period of time,
4 A blinking cursor appears. the call ends.
Use the keypad to type the required alias.
Advanced Features
Press < to move one space to the left. 11 You hear a short tone. The display shows Call Ended.
Press > to move one space to the right.
NOTE: Press d button or c to exit alias search.
Press the *DEL key to delete any unwanted characters.
5 The first line of the display shows the characters you keyed If you release the PTT button while the radio is setting
in. The next lines of the display show the shortlisted search up the call, it exits without any indication and returns to
results. the previous screen.
The alias search is case-insensitive. If there are two or more
aliases with the same name, the radio displays the alias that Your radio may be programmed to perform a radio
is listed first in the Contacts list. presence check prior to setting up the Private Call. If
the target radio is not available, you hear a short tone
6 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from and see negative mini notice on the display.
your mouth. The radio returns to the menu prior to initiating the
radio presence check.
46
English
Assigning an Entry to a Programmable mode, this feature is not supported when you long
press the number key in another mode.
Number Key
Advanced Features
See Making a Group, Private or All Call with the
Procedure:
Programmable Number Key on page 30 for details on making
1 c to access the menu. a Group, Private or All Call with the programmed number
key(s).
2 ^ or v to Contacts and press c to select. The entries
are alphabetically sorted. Removing the Association between Entry and
3 ^ or v to the required alias or ID and press c to select. Programmable Number Key
English
7 ^ or v to Yes and press c to select. Call Indicator Settings
8 The radio sounds a positive indicator tone and the display
shows positive mini notice. Activating or Deactivating Call Ringers for Call
9 The screen automatically returns to the previous menu. Alert
You can select, or turn on or off ringing tones for a received Call
NOTE: When an entry is deleted, the association between the Alert.
entry and its programmed number key(s) is removed.
Procedure:
Setting Default Contact 1 c to access the menu.
Procedure:
2 ^ or v to Utilities and press c to select.
Follow the procedure below.
3 ^ or v to Radio Settings and press c to select.
1 c to access the menu.
4 ^ or v to Tones/Alerts and press c to select.
Advanced Features
48
English
Activating or Deactivating Call Ringers for Private Activating or Deactivating Call Ringers for
Calls Selective Call
Advanced Features
You can turn on or off the ringing tones for a received Private You can select, or turn on or off ringing tones for a received
Call. Selective Call.
Procedure: Procedure:
1 c to access the menu. 1 c to access the menu.
2 ^ or v to Utilities and press c to select. 2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select. 3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Tones/Alerts and press c to select. 4 ^ or v to Tones/Alerts and press c to select.
5 ^ or v to Call Ringers and press c to select. 5 ^ or v to Call Ringers and press c to select.
6 ^ or v to Private Call. 6 ^ or v to Selective Call and press c to select. The
current tone is indicated by a 9.
7 Press c to enable Private Call ringing tones. The display
shows 9 beside Enabled. 7 ^ or v to the required tone and press c to select. 9
OR appears beside selected tone.
Press c to disable Private Call ringing tones. The 9
disappears from beside Enabled. NOTE: At Step 6, you can also use < or > to change the
selected option.
NOTE: At Step 6, you can also use < or > to change the
selected option.
49
English
Activating or Deactivating Call Ringers for Text Activating or Deactivating Call Ringers for
Message Telemetry Status with Text
You can select, or turn on or off the ringing tones for a received You can turn on or off the alert tones for a received Telemetry
Text Message. Status with Text.
Procedure: Procedure:
1 c to access the menu. 1 c to access the menu.
2 ^ or v to Utilities and press c to select. 2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select. 3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Tones/Alerts and press c to select. 4 ^ or v to Tones/Alerts and press c to select.
5 ^ or v to Call Ringers and press c to select. 5 ^ or v to Call Ringers and press c to select.
Advanced Features
6 ^ or v to Messages and press c to select. The current 6 ^ or v to Telemetry and press c to select. The current
tone is indicated by a 9. tone is indicated by a 9.
7 ^ or v to the required tone and press c to select. 9 7 ^ or v to the required tone and press c to select. 9
appears beside selected tone. appears beside selected tone.
NOTE: At Step 6, you can also use < or > to change the NOTE: At Step 6, you can also use < or > to change the
selected option. selected option.
50
English
Assigning Ring Styles Escalating Alarm Tone Volume
You can program your radio to sound one of ten predefined You can program your radio to continually alert you when a
Advanced Features
ringing tones when receiving a Call Alert or a Text Message radio call remains unanswered. This is done by automatically
from a particular contact. increasing the alarm tone volume over time. This feature is
known as Escalert.
Procedure:
Procedure:
1 c to access the menu.
1 c to access the menu.
2 ^ or v to Contacts and press c to select.The entries
are alphabetically sorted. 2 ^ or v to Utilities and press c to select.
3 ^ or v to the required alias or ID and press c to select. 3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Edit and press c to select. 4 ^ or v to Tones/Alerts and press c to select.
5 Press c until display shows Edit Ringtone menu. 5 ^ or v to Escalert.
6 A 9 indicates the current selected tone. 6 Press c to enable Escalert. The display shows 9 beside
Enabled.
7 ^ or v to the required tone and press c to select. 9 OR
appears beside selected tone.
Press c to disable Escalert. The 9 disappears from
8 The display shows a positive mini notice. beside Enabled.
The radio sounds out each ring style as you navigate through
NOTE: At Step 5, you can also use < or > to change the
the list.
selected option.
51
English
Call Log Features Storing an Alias or ID from a Call List
Procedure:
Your radio keeps track of all recent outgoing, answered, and
missed Private Calls. Use the call log feature to view and 1 c to access the menu.
manage recent calls.
2 ^ or v to Call Log and press c to select.
You can perform the following tasks in each of your call lists:
3 ^ or v to the required list and press c to select.
Store ID to Contacts
Delete 4 ^ or v to the required alias or ID and press c to select.
Procedure:
1 c to access the menu. You can also store an ID without an alias.
2 ^ or v to Call Log and press c to select. Deleting a Call from a Call List
3 ^ or v to required list and press c to select. Procedure:
4 The display shows the most recent entry at the top of the 1 c to access the menu.
list. 2 ^ or v to Call Log and press c to select.
5 ^ or v to view the list.
3 ^ or v to the required list and press c to select.
Press the PTT button to start a Private Call with the current 4 ^ or v to the required alias or ID and press c to select.
selected alias or ID.
52
English
5 ^ or v to Delete and press c to select. Call Alert Operation
6 Press c to select Yes to delete the entry. The display Call Alert paging enables you to alert a specific radio user to call
Advanced Features
shows positive mini notice. you back when they are able to do so.
OR
This feature is applicable for subscriber aliases or IDs only and
^ or v to No to return to the previous screen. is accessible through the menu via Contacts or manual dial.
When you select a call list and it contains no entries, the display
shows List Empty, and sounds a low tone if Keypad Tones are
Receiving and Responding to a Call Alert
turned on (see Turning Keypad Tones On or Off on page 86). When you receive a Call Alert page, you see the notification list
listing a Call Alert with the alias or ID of the calling radio on the
Viewing Details from a Call List display.
Procedure: Procedure:
1 c to access the menu. 1 You hear a repetitive tone. The LED blinks yellow.
2 ^ or v to Call Log and press c to select. 2 Press the PTT button while the display still shows the Call
Alert in the Notification List to respond with a Private Call.
3 ^ or v to the required list and press c to select. OR
Press d to exit the Notification List. The alert is moved to
4 ^ or v to the required alias or ID and press c to select. the Missed Call Log.
5 ^ or v to View Details and press c to select. Display See Notification List on page 85 for details about the
shows details. Notification List.
See Call Log Features on page 52 for details about the Missed
Call List.
53
English
Making a Call Alert from the Contacts List Making a Call Alert with the One Touch Access
Procedure: Button
Procedure:
1 c to access the menu.
1 Press the programmed One Touch Access button to make
2 ^ or v to Contacts and press c to select. a Call Alert to the predefined alias or ID.
3 ^ or v to the required subscriber alias or ID and press c 2 The display shows Call Alert and the subscriber alias or
to select. ID, indicating that the Call Alert has been sent.
OR
3 The LED lights up solid green when your radio is sending
^ or v to Manual Dial and press c to select. A blinking the Call Alert.
cursor appears. Enter the subscriber ID you want to page
and press c.
4 If the Call Alert acknowledgement is received, the display
shows positive mini notice.
4 ^ or v to Call Alert and press c to select. OR
If the Call Alert acknowledgement is not received, the
Advanced Features
5 The display shows Call Alert and the subscriber alias or display shows negative mini notice.
ID, indicating that the Call Alert has been sent.
6 The LED lights up solid green when your radio is sending
the Call Alert.
7 If the Call Alert acknowledgement is received, the display
shows positive mini notice.
OR
If the Call Alert acknowledgement is not received, the
display shows negative mini notice.
54
English
Emergency Operation In addition, each alarm has the following types:
Regular Radio transmits an alarm signal and shows audio
An Emergency Alarm is used to indicate a critical situation. You and/or visual indicators.
Advanced Features
are able to initiate an Emergency at any time on any screen Silent Radio transmits an alarm signal without any audio or
display even when there is activity on the current channel. visual indicators. Radio receives calls without any sound
Your dealer can set the duration of a button press for the through the radios speaker, until you press the PTT button to
programmed Emergency button, except for long press, which is initiate the call.
similar with all other buttons: Silent with Voice Radio transmits an alarm signal without
any audio or visual indicators, but allow incoming calls to
Short press Between 0.05 seconds and 0.75 seconds sound through the radios speaker.
Long press Between 1.00 second and 3.75 seconds Only ONE of the Emergency Alarms above can be assigned to
The Emergency button is assigned with the Emergency On/Off the programmed Emergency button.
feature. Check with your dealer for the assigned operation of
the Emergency button. Receiving an Emergency Alarm
If short press the Emergency button is assigned to turn on the Procedure:
Emergency mode, then long press the Emergency button is
assigned to exit the Emergency mode. 1 The emergency icon appears, a tone sounds, the LED
blinks red, and the radio displays the Alarm List if there is
If long press the Emergency button is assigned to turn on the more than one alarm listed. The emergency caller aliases
Emergency mode, then short press the Emergency button is are listed. ^ or v to the required alias and press c to
assigned to exit the Emergency mode.
view more details. Press c again to view your action
Your radio supports three Emergency Alarms: options.
Emergency Alarm OR
The emergency icon appears, a tone sounds, the LED
Emergency Alarm with Call blinks red, and the radio displays the emergency caller alias
Emergency Alarm with Voice to Follow Press c to view more details. Press c again to view your
action options.
55
English
2 Press d and select Yes to exit the Alarm List. 5 Release the PTT button to listen. When the emergency
initiating radio responds, the LED blinks green. You see the
To revisit the Alarm List, press c to access the menu and
Group Call icon, the group ID, and transmitting radio ID on
select Alarm List.
your display.
English
If your radio does not receive an Emergency Alarm 4 Your radio enters the emergency call mode when the display
acknowledgement, and after all retries have been shows Emergency and the destination group alias.
exhausted, a tone sounds and the display shows Alarm
5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
Advanced Features
Failed.
your mouth.
4 Radio exits the Emergency Alarm mode and returns to the
Home screen. 6 Press PTT button to make the call. The LED lights up solid
green and the group icon appears on the display.
If your radio is set to Silent, it does not display any audio or
visual indicators during Emergency mode. 7 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
Sending an Emergency Alarm with Call OR
Wait for the PTT Sidetone to finish (if enabled) and
This feature allows you to send an Emergency Alarm to a group
speak clearly into the microphone.
of radios. Upon acknowledgement by a radio within the group,
the group of radios can communicate over a programmed 8 Release the PTT button to listen.
Emergency channel. When you receive a group call, the display shows the caller
alias and group alias.
Procedure:
1 Press the programmed Emergency On button. 9 When the channel is free for you to respond, a short alert
tone sounds ( if the Channel Free Indication feature is
2 The display shows Tx Alarm and the destination alias. The
enabled). Press the PTT button to respond.
LED lights up solid green and the Emergency icon appears.
OR
OR
Once your call ends, press Emergency Off button to exit
The display shows Tx Telegram and the destination the Emergency mode.
alias. The LED lights up solid green and the Emergency icon
appears. 10 The radio returns to the Home screen.
3 When an Emergency Alarm acknowledgment is received, If your radio is set to Silent, it does not display any audio or
the Emergency tone sounds and the LED blinks green. The visual indicators during Emergency mode, or allow any received
display shows Alarm Sent.
57
English
calls to sound through the radios speaker, until you press the NOTE: If you press the PTT button during hot mic, and
PTT button to initiate the call. continue to press it after the hot mic duration expires,
the radio continues to transmit until you release the
If your radio is set to Silent with Voice, it does not display any
PTT button.
audio or visual indicators during Emergency mode, but allow
incoming calls to sound through the radios speaker. The Procedure:
indicators only appear once you press the PTT button to initiate, 1 Press the programmed Emergency On button.
or respond to, the call.
2 The display shows Tx Alarm and the destination alias. The
Sending an Emergency Alarm with Voice to LED lights up solid green and the Emergency icon appears.
OR
Follow
The display shows Tx Telegram and the destination
This feature allows you to send an Emergency Alarm to a group alias. The LED lights up solid green and the Emergency icon
of radios. Your radios microphone is automatically activated, appears.
allowing you to communicate with the group of radios without
pressing the PTT button. 3 Once the display shows Alarm Sent, speak clearly into the
Advanced Features
NOTE: During Emergency Cycle Mode, received calls sound 4 The radio automatically stops transmitting when:
through the radios speaker. Once the cycling duration between hot mic and receiving
calls expires, if Emergency Cycle Mode is enabled.
If you press the PTT button during the programmed receiving OR
period, you will hear a prohibit tone, indicating that you should Once the hot mic duration expires, if Emergency Cycle
release the PTT button. The radio ignores the PTT press and Mode is disabled.
remains in Emergency mode.
5 To transmit again, press the PTT button.
OR
58
English
Press the programmed Emergency Off button to exit the You press the programmed Emergency On button during an
Emergency mode. Emergency initiation/transmission state. This causes the
radio to exit this state, and to reinitiate Emergency.
6 The radio returns to the Home screen.
Advanced Features
If your radio is set to Silent, it does not display any audio or
Exiting Emergency Mode
visual indicators during Emergency mode, or allow any NOTE: This feature is only applicable to the radio sending the
received calls to sound through the radios speaker, until the Emergency Alarm.
programmed hot mic transmission period is over, and you
press the PTT button. Your radio exits Emergency mode when one of the following
occurs:
If your radio is set to Silent with Voice, it does not display any
audio or visual indicators during Emergency mode when you Emergency Alarm acknowledgement is received (for
are making the call with hot mic, but allow sound through the Emergency Alarm only), OR
radios speaker when the target radio responds after the
An Emergency Exit Telegram is received, OR
programmed hot mic transmission period is over. The
indicators only appear when you press the PTT button. All retries to send the alarm have been exhausted, OR
NOTE: If the Emergency Alarm request fails, the radio does The Emergency Off button is pressed.
not retry to send the request, and enters the hot mic
state directly. NOTE: If your radio is powered off, it exits the Emergency
mode. The radio does not reinitiate the Emergency
mode automatically when it is turned on again.
Reinitiating an Emergency Mode
NOTE: This feature is only applicable to the radio sending the If you change channels when your radio is in
Emergency Alarm. Emergency mode to a channel that has no emergency
system configured, No Emergency is shown on your
There are two instances where this can happen: display.
You change the channel while the radio is in Emergency
mode. This exits the Emergency mode. If Emergency Alarm is
enabled on this new channel, the radio reinitiates Emergency. 59
English
Text Message Features 3 ^ or v to Compose and press c to select.
4 A blinking cursor appears.
Your radio is able to receive data, for example a text message,
Use the keypad to type your message.
from another radio or an e-mail application.
Press < to move one space to the left.
The maximum length of characters for sending a text message,
Press > or the # key to move one space to the right.
including the subject line (seen when receiving message from
an e-mail application), is 140, whereas to receive would be a Press the *DEL key to delete any unwanted characters.
maximum of 280 characters. 5 Press c once message is composed.
The radio exits the current screen once the inactivity timer
expires. Any text message in the writing/editing screen is
6 ^ or v to the required alias or ID and press c to select.
automatically saved to the Drafts folder. OR
^ or v to Manual Dial and press c to select.
NOTE: Long press d at any time to return to the Home Key in the subscriber ID and press c.
screen. OR
Advanced Features
60
English
If the text message fails to send, the radio returns you to the 6 Press c once message is composed.
Resend option screen (see Managing Fail-to-Send Text
Messages on page 63). 7 ^ or v to the required alias or ID and press c to select.
Advanced Features
OR
Sending a Quick Text Message
^ or v to Manual Dial and press c to select.
Your radio supports a maximum of 50 Quick Text messages as
Key in the subscriber alias or ID and press c.
programmed by your dealer.
OR
While Quick Text messages are predefined, you can edit each d to edit the message.
message before sending it.
d again to discard the message or save it to the Drafts
Procedure: folder.
Press the programmed Text Message button and proceed to
Step 3. 8 The display shows transitional mini notice, confirming your
OR message is being sent.
Follow the procedure below. 9 If the message is sent, a tone sounds and the display shows
positive mini notice.
1 c to access the menu.
OR
2 ^ or v to Messages and press c to select. If the message is not sent, a low tone sounds and the
display shows negative mini notice.
3 ^ or v to Quick Text and press c to select.
If the text message fails to send, the radio returns you to the
4 ^ or v to the required Quick Text and press c to select. Resend option screen (see Managing Fail-to-Send Text
Messages on page 63).
5 A blinking cursor appears.
Use the keypad to edit the message, if required.
Press < to move one space to the left.
Press > or the # key to move one space to the right.
Press the *DEL key to delete any unwanted characters.
61
English
Sending a Quick Text Message with the One Touch The Drafts folder stores a maximum of ten (10) last saved
Access Button messages. When the folder is full, the next saved text message
automatically replaces the oldest text message in the folder.
Procedure:
1 Press the programmed One Touch Access button to send NOTE: Long press d at any time to return to the Home
a predefined Quick Text message to a predefined alias or screen.
ID.
Viewing a Saved Text Message
2 The display shows transitional mini notice, confirming your
message is being sent. Procedure:
Press the programmed Text Message button and proceed to
3 If the message is sent, a tone sounds and the display shows Step 3.
positive mini notice. OR
OR Follow the procedure below.
If the message is not sent, a low tone sounds and the
display shows negative mini notice. 1 c to access the menu.
Advanced Features
If the text message fails to send, the radio returns you to the 2 ^ or v to Messages and press c to select.
Resend option screen (see Managing Fail-to-Send Text
Messages on page 63). 3 ^ or v to Drafts and press c to select.
Accessing the Drafts Folder 4 ^ or v to the required message and press c to select.
You can save a text message to send it at a later time.
Editing and Sending a Saved Text Message
If a PTT button press or a mode change causes the radio to exit
the text message writing/editing screen while you are in the Procedure:
process of writing or editing a text message, your current text 1 Press c again while viewing the message.
message is automatically saved to the Drafts folder.
2 ^ or v to Edit and press c to select.
The most recent saved text message is always added to the top
A blinking cursor appears.
62 of the Drafts list.
English
Use the keypad to edit your message. OR
Press < to move one space to the left. Follow the procedure below.
Press > or the # key to move one space to the right. 1 c to access the menu.
Advanced Features
Press the *DEL key to delete any unwanted characters.
2 ^ or v to Messages and press c to select.
Press c once message is composed.
3 ^ or v to Drafts and press c to select.
3 ^ or v to the required alias or ID and press c to select.
OR 4 ^ or v to the required message and press c to select.
^ or v to Manual Dial and press c to select.
5 Press c again while viewing the message.
Key in the subscriber alias or ID and press c.
6 ^ or v to Delete and press c to delete the text
4 The display shows transitional mini notice, confirming your
message.
message is being sent.
5 If the message is sent, a tone sounds and the display shows Managing Fail-to-Send Text Messages
positive mini notice.
OR You can select one of the following options while at the Resend
If the message is not sent, a low tone sounds and the option screen:
display shows negative mini notice.
Resend
If the text message fails to send, it is moved to the Sent Items Forward
folder and marked with a Send Failed icon.
Edit
Deleting a Saved Text Message from Drafts NOTE: If the channel type (i.e. conventional digital or Capacity
Procedure: Plus or Linked Capacity Plus) is not a match, you can
Press the programmed Text Message button and proceed to only edit and forward a Fail-to-Send message.
Step 3.
63
English
Resending a Text Message OR
If the message is not sent, a low tone sounds and the
Procedure: display shows negative mini notice.
1 Press c to resend the same message to the same
subscriber/group alias or ID. Editing a Text Message
2 If the message is sent, a tone sounds and the display shows Select Edit to edit the message before sending it.
positive mini notice.
OR NOTE: If a subject line is present (for messages received from
If the message is not sent, a low tone sounds and the an e-mail application), you cannot edit it.
display shows negative mini notice. Procedure:
1 ^ or v to Edit and press c to select.
Forwarding a Text Message
2 A blinking cursor appears.
Select Forward to send the message to another subscriber/
Use the keypad to edit your message.
group alias or ID.
Advanced Features
4 If the message is sent, a tone sounds and the display shows d to edit the message.
64 positive mini notice.
English
d again to delete the message or save it to the Drafts Viewing a Sent Text Message
folder. Procedure:
Advanced Features
5 ^ or v to the required alias or ID and press c to select. Press the programmed Text Message button and proceed to
OR Step 3.
OR
^ or v to Manual Dial and press c to select.
Follow the procedure below.
Key in the subscriber ID and press c.
1 c to access the menu.
6 The display shows transitional mini notice, confirming your
message is being sent. 2 ^ or v to Messages and press c to select.
7 If the message is sent, a tone sounds and the display shows 3 ^ or v to Sent Items and press c to select.
positive mini notice.
OR 4 ^ or v to the required message and press c to select.
If the message is not sent, a low tone sounds and the A subject line may be shown if the message is from an
display shows negative mini notice. e-mail application.
English
NOTE: If the channel type (i.e. conventional digital or Capacity The display returns to the Resend option screen if you
Plus or Linked Capacity Plus) is not a match, you can press the PTT button to respond to a Private Call
only edit, forward, or delete a Sent message. (except when the radio is displaying the Missed Call
screen), and at the end of an All Call.
Procedure:
1 Press c again while viewing the message. Press ^ or v to access the Forward, Edit, or Delete option
screen:
2 ^ or v to Resend and press c to select.
Select Forward to send the selected text message to another
3 The display shows transitional mini notice, confirming that subscriber/group alias or ID (see Forwarding a Text
the same message is being sent to the same target radio. Message on page 64).
4 If the message is sent, a tone sounds and the display shows Select Edit to edit the selected text message before sending
positive mini notice. it (see Editing a Text Message on page 64).
OR Select Delete to delete the text message.
If the message is not sent, a low tone sounds and the
display shows negative mini notice. NOTE: If you exit the message sending screen while the
Advanced Features
English
Deleting All Sent Text Messages from Sent Items Receiving a Text Message
Procedure: When your radio receives a message, the display shows the
Advanced Features
Press the programmed Text Message button and proceed to Notification List with the alias or ID of the sender and the
Step 3. message icon.
OR
You can select one of the following options when receiving a
Follow the procedure below.
text message:
1 c to access the menu.
Read
2 ^ or v to Messages and press c to select. Read Later
3 ^ or v to Sent Items and press c to select. Delete
4 ^ or v to Delete All and press c to select. NOTE: The radio exits the Text Message alert screen and sets
up a Private or Group Call to the sender of the
5 ^ or v to Yes and press c to select. The display shows message if the PTT button is pressed when the radio is
positive mini notice displaying the alert screen.
OR
Reading a Text Message
^ or v to No and press c to return to the previous
screen. Procedure:
When you select Sent Items and it contains no text messages, 1 ^ or v to Read? and press c to select.
the display shows List Empty, and sounds a low tone if 2 Selected message in the Inbox opens.
Keypad Tones are turned on (see Turning Keypad Tones On A subject line may be shown if the message is from an
or Off on page 86). e-mail application.
English
Press ^ or v to access the Read Later or Delete option Viewing a Text Message from the Inbox
screen: Procedure:
Select Read Later to return to the screen you were on prior 1 c to access the menu.
to receiving the text message.
Select Delete to delete the text message. 2 ^ or v to Messages and press c to select.
3 ^ or v to Inbox and press c to select.
Managing Received Text Messages
Use the Inbox to manage your text messages. The Inbox is 4 ^ or v to view the messages.
capable of storing a maximum of 30 messages. A subject line may be shown if the message is from an
e-mail application.
Your radio supports the following options for text messages:
5 Press c to select the current message, and press c
Reply again to reply, forward, or delete that message.
Forward OR
Advanced Features
English
4 ^ or v to the required message and press c to select. A blinking cursor appears. Use the keypad to edit your
message, if required.
5 The display shows Telemetry: <Status Text Message>.
7 Press c once message is composed.
Advanced Features
6 Long press d to return to the Home screen.
8 The display shows transitional mini notice, confirming your
You cannot reply to a Telemetry Status text message. message is being sent.
9 If the message is sent, a tone sounds and the display shows
Replying to a Text Message from the Inbox positive mini notice.
Procedure: OR
If the message is not sent, a low tone sounds and the
Press the programmed Text Message button and proceed to
display shows negative mini notice.
Step 3.
OR If the message fails to send, the radio returns you to the Resend
Follow the procedure below. option screen (see Managing Fail-to-Send Text Messages on
1 c to access the menu. page 63).
2 ^ or v to Messages and press c to select. Deleting a Text Message from the Inbox
3 ^ or v to Inbox and press c to select. Procedure:
Press the programmed Text Message button and proceed to
4 ^ or v to the required message and press c to select. Step 3.
A subject line may be shown if the message is from an OR
e-mail application. Follow the procedure below.
5 Press c once more to access the sub-menu. 1 c to access the menu.
6 ^ or v to Reply and press c to select. 2 ^ or v to Messages and press c to select.
OR
^ or v to Quick Reply and press c to select.
3 ^ or v to Inbox and press c to select.
69
English
4 ^ or v to the required message and press c to select. Deleting All Text Messages from the Inbox
A subject line may be shown if the message is from an Procedure:
e-mail application. Press the programmed Text Message button and proceed to
5 Press c once more to access the sub-menu. Step 3.
OR
6 ^ or v to Delete and press c to select. Follow the procedure below.
1 c to access the menu.
7 ^ or v to Yes and press c to select.
8 The display shows positive mini notice. 2 ^ or v to Messages and press c to select.
9 The screen returns to the Inbox. 3 ^ or v to Inbox and press c to select.
4 ^ or v to Delete All and press c to select.
5 ^ or v to Yes and press c to select.
Advanced Features
70
English
Analog Message Encode Sending 5-Tone Message Encode to Contact
Procedure:
Your radio is able to send preprogrammed messages from the
Advanced Features
Message list to a radio alias or to the dispatcher. 1 ^ or v to Message and press c to select.
2 ^ or v to Quick Text and press c to select.
Sending MDC Message Encode to Dispatcher
3 ^ or v to the required message. Press c to select.
Procedure:
1 ^ or v to Message and press c to select. 4 ^ or v to the required contact. Press c to select.
2 ^ or v to Quick Text and press c to select. 5 The display shows transitional mini notice, confirming your
message is being sent.
3 ^ or v to the required message. Press c to send.
6 If the message is sent, a tone sounds and the display shows
4 The display shows transitional mini notice, confirming your positive mini notice.
message is being sent. OR
If the message is not sent, a low tone sounds and the
5 If the message is sent, a tone sounds and the display shows display shows negative mini notice.
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
71
English
Analog Status Update For 5-Tone systems, see Setting Default Contact on page 48
for details on setting the default contact.
Your radio is able to send preprogrammed messages from the For 5-Tone systems, a PTT button press while in the status list
Status List indicating your current activity to a radio contact (for sends the selected status update and returns to the Home
5-Tone systems) or to the dispatcher (for MDC systems). screen to initiate a voice call.
The last acknowledged message is kept at the top of the Status
List. The other messages are arranged in alphanumeric order. Viewing 5-Tone Status Details
Procedure:
Sending Status Update to Predefined Contact 1 ^ or v to Status and press c to select.
Procedure:
2 ^ or v to the required status. Press c to select.
1 ^ or v to Status and press c to select.
3 ^ or v to View Details. Press c to select.
2 ^ or v to the required status. Press c to select.
4 The display shows details of the selected status.
3 ^ or v to Set as Default. Press c to send the status
Advanced Features
update.
Editing 5-Tone Status Details
4 The display shows transitional mini notice, confirming your
Procedure:
status update is being sent.
1 ^ or v to Status and press c to select.
5 If the status update is acknowledged, a tone sounds and the
display shows positive mini notice. A 9 appears beside the 2 ^ or v to the required status. Press c to select.
acknowledged status.
OR 3 ^ or v to Edit. Press c to select.
If the status update is not acknowledged, a low tone sounds
and the display shows negative mini notice. A 9 remains
4 A blinking cursor appears.
Use the keypad to edit the status details.
beside the previous status.
Press < to move one space to the left.
English
Press the *DEL key to delete any unwanted characters. Privacy
Press c once editing is complete.
If enabled, this feature helps to prevent eavesdropping by
Advanced Features
5 The display shows Status Saved.
unauthorized users on a channel by the use of a software-
6 Radio returns to Status List. based scrambling solution. The signaling and user identification
portions of a transmission are not scrambled.
Your radio must have privacy enabled on the channel to send a
privacy-enabled transmission, although this is not a necessary
requirement for receiving a transmission. While on a privacy-
enabled channel, the radio is still able to receive clear
(unscrambled) transmissions.
Your radio supports Enhanced Privacy. To unscramble a
privacy-enabled call or data transmission, your radio must be
programmed to have the same Key Value and Key ID as the
transmitting radio.
If your radio receives a scrambled call that is of a different Key
Value and Key ID, you will hear nothing at all.
The LED lights up solid green while the radio is transmitting and
double blinks green when the radio is receiving an ongoing
privacy-enabled transmission.
73
English
Procedure: Dual Tone Multi Frequency (DTMF)
Press the programmed Privacy button to toggle privacy on or
off. The Dual Tone Multi Frequency (DTMF) feature allows the radio
OR to operate in a radio system with an interface to telephone
Follow the procedure below. systems.
1 c to access the menu. Procedure:
2 ^ or v to Utilities and press c to select. To initiate a DTMF call.
3 ^ or v to Radio Settings and press c to select. 1 Press and hold the PTT button.
5 Press c to enable Privacy. The display shows 9 beside You can turn off the DTMF tone by disabling all radio tones and
alerts (see Turning the Radio Tones/Alerts On or Off on
Enabled.
OR page 85).
Advanced Features
NOTE: At Step 4, you can also use < or > to change the
selected option.
74
English
Multi-Site Controls Procedure:
Use the menu.
These features are applicable when your current radio channel 1 c to access the menu.
Advanced Features
is part of an IP Site Connect or Linked Capacity Plus
configuration. 2 ^ or v to Utilities and press c to select.
See IP Site Connect on page 13 and Linked Capacity Plus on 3 ^ or v to Radio Settings and press c to select.
page 14 for more details about these configurations.
4 ^ or v to Site Roaming and press c to select.
Starting an Automatic Site Search
5 ^ or v to Unlock Site and press c to select. A tone
NOTE: The radio only scans for a new site if the current signal sounds and the display shows Site Unlocked.
is weak or when the radio is unable to detect any signal
from the current site. If the RSSI value is strong, the
6 The radio returns to the Home screen. The display shows
radio remains on the current site. the channel alias and the site roaming icon appears.
Procedure:
7 The LED blinks yellow rapidly when the radio is actively
searching for a new site, and turns off once the radio locks
Press the programmed Site Lock On/Off button.
on to a site.
1 A tone sounds and the display shows Site Unlocked.
The radio also performs an automatic site search (site is
2 The LED blinks yellow rapidly when the radio is actively unlocked) during a PTT button press or data transmission if
searching for a new site, and turns off once the radio locks the current channel, a multi-site channel with an attached
on to a site. roam list, is out of range.
3 The display shows the channel alias and the site roaming
icon appears. Stopping an Automatic Site Search
When the radio is actively searching for a new site:
OR
75
English
Procedure: Starting a Manual Site Search
Press the programmed Site Lock On/Off button.
Procedure:
1 A tone sounds and the display shows Site Locked. Press the programmed Manual Site Roam button and proceed
to Step 6.
2 The LED turns off and the display shows the channel alias.
OR
OR Follow the procedure below.
6 Press c to lock site. The display shows 9 beside Enabled. 7 If a new site is found, a tone sounds and the LED turns off.
OR The display shows Site <Alias> Found.
Press c to unlock site. The 9 disappears from beside OR
If there is no available site within range, a tone sounds and
Enabled. The LED turns off and the radio returns to the
the LED turns off. The display shows Out of Range.
Home screen. The display shows the channel alias.
OR
If a new site is within range, but the radio is unable to
NOTE: At Step 5, you can also use < or > to change the connect to it, a tone sounds and the LED turns off. The
selected option. display shows Channel Busy.
8 The radio returns to the Home screen.
76
English
Security Procedure:
Use the menu.
You can enable or disable any radio in the system. For example, 1 c to access the menu.
Advanced Features
you might want to disable a stolen radio, to prevent the thief
from using it, and enable that radio, when it is recovered. 2 ^ or v to Contacts and press c to select. The entries
are alphabetically sorted.
NOTE: Performing Radio Disable and Enable is limited to
radios with these functions enabled. Check with your 3 ^ or v to the required alias or ID and press c to select.
dealer or system administrator for more information. OR
^ or v to Manual Dial and press c to select.
Radio Disable
Key in the subscriber alias or ID and press c.
Procedure:
Use the programmed Radio Disable button. 4 ^ or v to Radio Disable and press c to select.
1 Press the programmed Radio Disable button. 5 The display shows transitional mini notice, indicating the
request is in progress. The LED blinks green.
2 ^ or v to the required alias or ID and press c to select.
6 Wait for acknowledgment.
3 The display shows transitional mini notice, indicating the
request is in progress. The LED blinks green. 7 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
4 Wait for acknowledgment. OR
If unsuccessful, a negative indicator tone sounds and the
5 If successful, a positive indicator tone sounds and the
display shows negative mini notice.
display shows positive mini notice.
OR
Do not press d during the Radio Disable operation as you will
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice. not get an acknowledgement message.
OR
77
English
Radio Enable ^ or v to Manual Dial and press c to select.
Procedure: Key in the subscriber alias or ID and press c.
Use the programmed Radio Enable button.
4 ^ or v to Radio Enable and press c to select.
1 Press the programmed Radio Enable button.
5 The display shows Radio Enable and the subscriber alias
2 ^ or v to the required alias or ID and press c to select. or ID. The LED lights up solid green.
3 The display shows Radio Enable and the subscriber alias 6 Wait for acknowledgment.
or ID. The LED lights up solid green.
7 If successful, the radio sounds a positive indicator tone and
4 Wait for acknowledgment. the display shows positive mini notice.
OR
5 If successful, the radio sounds a positive indicator tone and If unsuccessful, the radio sounds a negative indicator tone
the display shows positive mini notice. and the display shows negative mini notice.
OR
If unsuccessful, the radio sounds a negative indicator tone Do not press d during the Radio Enable operation as you will
Advanced Features
78
English
Lone Worker Password Lock Features
This feature prompts an emergency to be raised if there is no If enabled, this feature allows you to access your radio via
Advanced Features
user activity, such as any radio button press or activation of the password upon powering up.
channel selector, for a predefined time.
Following no user activity for a programmed duration, the radio Accessing the Radio from Password
pre-warns the user via an audio indicator once the inactivity Procedure:
timer expires. Power up the radio.
If there is still no acknowledgment by the user before the 1 You hear a continuous tone.
predefined reminder timer expires, the radio initiates an
Emergency Alarm. 2 Enter your current four-digit password with the radios
keypad. The display shows . Press c to proceed.
Only one of the following Emergency Alarms is assigned to this
feature:
OR
Emergency Alarm Enter your current four-digit password. Press ^ or v to edit
Emergency Alarm with Call each digits numeric value. Press > or c to move to the
next digit. Each digit changes to . Press c to confirm
Emergency Alarm with Voice to Follow
your selection.
The radio remains in the emergency state allowing voice
You hear a positive indicator tone for every digit pressed.
messages to proceed until action is taken. See Emergency
Operation on page 55 on ways to exit Emergency. Press < to remove the each on the display. You hear a
negative indicator tone, if you press < when the line is
NOTE: This feature is limited to radios with this function empty, or if you press more than four digits.
enabled. Check with your dealer or system
administrator for more information. 3 If the password is correct:
Your radio proceeds to power up. See Powering Up the
Radio on page 5. 79
English
OR Your radio restarts the 15 minutes timer for locked state when
If the password is incorrect: you power up.
The display shows Wrong Password. Repeat Steps 2.
Turning the Password Lock On or Off
OR
After the third incorrect password, the display shows Wrong Procedure:
Password and then, shows Radio Locked. A tone sounds 1 c to access the menu.
and the LED double blinks yellow.
2 ^ or v to Utilities and press c to select.
Your radio enters into locked state for 15 minutes, and responds
to inputs from On/Off/Volume Control Knob and programmed 3 ^ or v to Radio Settings and press c to select.
Backlight Auto button only.
4 ^ or v to Passwd Lock and press c to select.
NOTE: The radio is unable to receive any call, including
emergency calls, in locked state.
5 Enter your current four-digit password.
See Step 2 in Accessing the Radio from Password on
Advanced Features
page 79.
Unlocking the Radio from Locked State
6 If the password is correct:
Procedure:
Wait for 15 minutes. Repeat Steps 1 to 3 in Accessing the Press c to enable Password Lock. The display shows 9
Radio from Password on page 79. beside Enabled.
OR OR
Power up the radio, if you have powered down the radio during Press c to disable Password Lock. The 9 disappears from
locked state: beside Enabled.
1 A tone sounds and the LED double blinks yellow. The OR
If the password is incorrect:
display shows Radio Locked.
The display shows Wrong Password and automatically
2 Wait for 15 minutes. Repeat Accessing the Radio from returns to the previous menu.
Password on page 79.
80
English
NOTE: At Step 6, you can also use < or > to change the 9 If both of the new password inputs match:
selected option. The display shows Password Changed.
OR
Advanced Features
Changing the Password If both of the new password inputs do not match:
The display shows Passwords Do Not Match.
Procedure:
10 The screen automatically returns to the previous menu.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Passwd Lock and press c to select.
5 Enter your current four-digit password.
See Step 2 in Accessing the Radio from Password on
page 79.
6 If the password is correct:
^ or v to Change Pwd and press c to select.
OR
If the password is incorrect:
The display shows Wrong Password and automatically
returns to the previous menu.
7 Enter a new four-digit password. See Step 2 in Accessing
the Radio from Password on page 79.
8 Re-enter the new four-digit password. See Step 2 in
Accessing the Radio from Password on page 79.
81
English
Bluetooth Operation Turning Bluetooth On or Off
Procedure:
This feature allows you to use your radio with a Bluetooth-
enabled device (accessory) via a Bluetooth connection. Your 1 c to access the menu.
radio supports both Motorola and COTS (Commercially
available Off-The-Shelf) Bluetooth-enabled devices. 2 ^ or v to Bluetooth and press c to select.
Bluetooth operates within a range of 10 meters line of sight. 3 ^ or v to My Status and press c to select.
This is an unobstructed path between your radio and your
Bluetooth-enabled device. 4 The display shows On and Off. ^ or v to On and press c
to enable Bluetooth. 9 appears beside On. The Bluetooth
It is not recommended that you leave your radio behind and icon appears on the status bar.
expect your Bluetooth-enabled device to work with a high OR
degree of reliability when they are separated.
The display shows On and Off. ^ or v to Off and press
At the fringe areas of reception, both voice and tone quality will c to disable Bluetooth. 9 appears beside Off.
start to sound "garbled" or "broken". To correct this problem,
Advanced Features
English
4 ^ or v to the required device and press c to select. Disconnecting from a Bluetooth Device
OR Procedure:
^ or v to Find Devices to locate available devices.
Advanced Features
^ or v to the required device and press c to select. 1 On your radio, press c to access the menu.
5 ^ or v to Connect and press c to select. Display shows 2 ^ or v to Bluetooth and press c to select.
Connecting to <device>. 3 ^ or v to Devices and press c to select.
Your Bluetooth-enabled device may require additional steps
to complete the pairing. Refer to respective Bluetooth- 4 ^ or v to the required device and press c to select.
enabled devices user manual.
5 ^ or v to Disconnect and press c to select. Display
6 If successful, the radio display shows <Device> shows Disconnecting from <device>.
Connected. A tone sounds and 9 appears beside the Your Bluetooth-enabled device may require additional steps
connected device. The Bluetooth Connected icon appears to disconnect. Refer to respective Bluetooth-enabled
on the status bar. devices user manual.
OR
If unsuccessful, the radio display shows Connecting 6 The radio display shows <Device> Disconnected. A
Failed. positive indicator tone sounds and 9 disappears beside the
connected device. The Bluetooth Connected icon
Do not turn off your Bluetooth-enabled device or press d disappears on the status bar.
during the finding and connecting operation as this cancels the
operation. Switching Audio Route
NOTE: If pin code is required, use the same entry method as You can toggle audio routing between internal radio speaker
Step 2 in Accessing the Radio from Password on and external Bluetooth-enabled accessory.
page 79.
Procedure:
1 Press the programmed Bluetooth Audio Switch button.
83
English
2 A tone sounds and display shows Route Audio to Radio. Editing Device Name
OR
You can edit the name of available Bluetooth-enabled devices.
A tone sounds and display shows Route Audio to
Bluetooth. Procedure:
2 ^ or v to Bluetooth and press c to select. 4 ^ or v to the required device and press c to select.
5 ^ or v to View Details and press c to select. Press < to move one space to the left.
Press > to move one space to the right.
Press the *DEL key to delete any unwanted characters.
7 The display shows Device Name Saved.
84
English
Notification List Utilities
Your radio has a Notification List that collects all your unread
Advanced Features
events on the channel, such as unread text messages, Turning the Radio Tones/Alerts On or Off
telegrams, telemetry messages, missed calls, and call alerts. You can enable and disable all radio tones and alerts (except for
The Notification icon appears on the status bar when the the incoming Emergency alert tone) if needed.
Notification List has one or more events. Procedure:
The list supports a maximum of forty (40) unread events. When Press the programmed All Tones/Alerts button to toggle all
it is full, the next event automatically replaces the oldest event. tones on or off.
OR
After the events are read, they are removed from the Follow the procedure below.
Notification List.
1 c to access the menu.
NOTE: Your radio suspends Scan when the Notification List is
displayed. Scanning resumes when your radio exits the 2 ^ or v to Utilities and press c to select.
Notification List. Press d to exit the Notification List or
wait for the menu timer to expire.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Tones/Alerts and press c to select.
Accessing the Notification List
Procedure:
5 ^ or v to All Tones and press c to select.
1 c to access the menu. 6 Press c to enable all tones. The display shows 9 beside
Enabled.
2 ^ or v to Notification and press c to select. OR
Press c to disable all tones. The 9 disappears from
3 ^ or v to the required event and press c to select. beside Enabled.
English
NOTE: At Step 5, you can also use < or > to change the Setting the Tone Alert Volume Offset Level
selected option.
You can adjust the Tone Alert Volume Offset level if needed.
This feature adjusts the volume of the tones/alerts, allowing it to
Turning Keypad Tones On or Off be higher or lower than the voice volume.
You can enable and disable keypad tones if needed.
Procedure:
Procedure:
1 c to access the menu.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Tones/Alerts and press c to select.
4 ^ or v to Tones/Alerts and press c to select.
5 ^ or v to Vol. Offset and press c to select.
5 ^ or v to Keypad Tones and press c to select.
Advanced Features
86
English
Turning the Talk Permit Tone On or Off Settings: High enables communication with radios located at
a considerable distance from you. Low enables communication
You can enable and disable the Talk Permit Tone if needed.
with radios in closer proximity.
Advanced Features
Procedure:
Procedure:
1 c to access the menu. Press the programmed Power Level button to toggle transmit
power level between high and low.
2 ^ or v to Utilities and press c to select. OR
3 ^ or v to Radio Settings and press c to select. Follow the procedure below.
6 Press c to enable Talk Permit Tone. The display shows 9 3 ^ or v to Radio Settings and press c to select.
beside Enabled. 4 ^ or v to Power and press c to select.
OR
Press c to disable Talk Permit Tone. The 9 disappears 5
from beside Enabled. 6 ^ or v to the required setting and press c to select. 9
appears beside selected setting.
NOTE: At Step 5, you can also use < or > to change the
selected option. 7 Screen returns to the previous menu.
Setting the Power Level Long press d to return to the Home screen. The power level
icon is visible.
You can customize your radios power setting to high or low for
each channel. NOTE: At Step 4, you can also use < or > to change the
selected option.
87
English
Changing the Display Mode Adjusting the Display Brightness
You can change radios display mode between Day or Night, as You can adjust radios display brightness as needed.
needed. This affects the color palette of the display.
Procedure:
Procedure: Press the programmed Brightness button and proceed to
Press the programmed Display Mode button to toggle the Step 5.
display mode settings. OR
OR Follow the procedure below.
Follow the procedure below.
1 c to access the menu.
1 c to access the menu.
2 ^ or v to Utilities and press c to select.
2 ^ or v to Utilities and press c to select.
3 ^ or v to Radio Settings and press c to select.
3 ^ or v to Radio Settings and press c to select.
4 ^ or v to Brightness and press c to select.
4 ^ or v to Day/Night and press c to select.
Advanced Features
English
OR Settings: Normal is the default. Tight filters out (unwanted)
Follow the procedure below. calls and/or background noise. However, calls from remote
locations may also be filtered out.
1 c to access the menu.
Advanced Features
Procedure:
2 ^ or v to Utilities and press c to select. Press the programmed Squelch button to toggle squelch level
between normal and tight.
3 ^ or v to Radio Settings and press c to select. OR
Follow the procedure below.
4 ^ or v to Backlight Auto
1 c to access the menu.
5 Press c to enable backlight. The display shows 9 beside
Enabled. 2 ^ or v to Utilities and press c to select.
OR
Press c to disable backlight. The 9 disappears from 3 ^ or v to Radio Settings and press c to select.
beside Enabled.
4 ^ or v to Squelch and press c to select.
The display backlight and keypad backlighting are automatically
5 The display shows Tight and Normal. ^ or v to the
turned off if the LED indicator is disabled (see Turning the LED
Indicator On or Off on page 91). required setting and press c to enable. 9 appears besides
selected setting.
NOTE: At Step 4, you can also use < or > to change the
6 Screen returns to the previous menu.
selected option.
NOTE: At Step 4, you can also use < or > to change the
Setting the Squelch Level
selected option.
You can adjust your radio's squelch level to filter out unwanted
calls with low signal strength or channels that have a higher Turning the Introduction Screen On or Off
than normal background noise.
You can enable and disable the Introduction Screen if needed.
89
English
Procedure: 4 ^ or v to Keypad Lock and press c to select.
1 c to access the menu. 5 The display shows Keypad Locked and returns to the Home
screen.
2 ^ or v to Utilities and press c to select.
6 To unlock the keypad, press c followed by *.
3 ^ or v to Radio Settings and press c to select.
7 The display shows Keypad Unlocked and returns to the
4 ^ or v to Intro Screen and press c to select. Home screen.
5 Press c to enable Introduction Screen. The display shows NOTE: At Step 4, you can also use < or > to change the
9 beside Enabled. selected option.
OR
Press c to disable Introduction Screen. The 9 disappears Language
from beside Enabled. You can set your radio display to be in your required language.
Advanced Features
NOTE: At Step 4, you can also use < or > to change the Procedure:
selected option. 1 c to access the menu.
2 ^ or v to Utilities and press c to select. NOTE: At Step 4, you can also use < or > to change the
selected option.
3 ^ or v to Radio Settings and press c to select.
90
English
Turning the LED Indicator On or Off transmits, for a programmed period, whenever the microphone
on the VOX-capable accessory detects voice.
You can enable and disable the LED Indicator if needed.
Pressing the PTT button during radio operation disables VOX.
Advanced Features
Procedure: To re-enable VOX, do one of the following:
1 c to access the menu. Turn the radio off and power it on again, OR
2 ^ or v to Utilities and press c to select. Change the channel via the Channel Selector Knob, OR
3 ^ or v to Radio Settings and press c to select. Follow the procedure below.
4 ^ or v to LED Indicator and press c to select. NOTE: Turning this feature on or off is limited to radios with
this function enabled. Check with your dealer or system
5 Press c to enable LED indicator. The display shows 9 administrator for more information.
beside Enabled. Procedure:
OR Press the programmed VOX button to toggle the feature on or
Press c to disable LED indicator. The 9 disappears from off.
beside Enabled. OR
Follow the procedure below.
The display backlight, buttons, and keypad backlighting are
automatically turned off if the LED indicator is disabled (see 1 c to access the menu.
Controlling the Display Backlight on page 88).
2 ^ or v to Utilities and press c to select.
NOTE: At Step 4, you can also use < or > to change the
3 ^ or v to Radio Settings and press c to select.
selected option.
4 ^ or v to VOX.
Turning the Voice Operating Transmission (VOX)
Feature On or Off 5 Press c to enable VOX. The display shows 9 beside
Enabled.
This feature allows you to initiate a hands-free voice activated OR
call on a programmed channel. The radio automatically 91
English
Press c to disable VOX. The 9 disappears from beside 3 ^ or v to Radio Settings and press c to select.
Enabled.
4 ^ or v to Cable Type and press c to select.
If the Talk Permit Tone feature is enabled (see Turning the Talk
Permit Tone On or Off on page 87), use a trigger word to 5 The current cable type is indicated by a 9.
initiate the call. Wait for the Talk Permit Tone to finish before
speaking clearly into the microphone. NOTE: At Step 4, you can also use < or > to change the
selected option.
NOTE: At Step 4, you can also use < or > to change the
selected option. Voice Announcement
Turning the Option Board Feature(s) On or Off This feature enables the radio to audibly indicate the current
Zone or Channel the user has just assigned, or programmable
Option board capabilities within each channel and can be button press. This audio indicator can be customized per
assigned to programmable buttons. Refer to your dealer or customer requirements. This is typically useful when the user is
system administrator for more information. in a difficult condition to read the content shown on the display.
Advanced Features
English
4 Press c to enable Voice Announcement. The display NOTE: At Step 3, you can also use < or > to change the
shows 9 beside Enabled. selected option.
OR
Advanced Features
Press c to disable Voice Announcement. The 9 Menu Timer
disappears from beside Enabled. Set the period of time your radio stays in the menu before it
automatically switches to the Home screen.
NOTE: At Step 3, you can also use < or > to change the
Procedure:
selected option.
1 c to access the menu.
Call Forwarding
2 ^ or v to Utilities and press c to select.
You can enable your radio to automatically forward voice calls
to another radio. 3 ^ or v to Radio Settings and press c to select.
Procedure: 4 ^ or v to Menu Timer and press c to select.
1 c to access the menu. 5 ^ or v to the required setting and press c to enable.
2 ^ or v to Utilities and press c to select.
Analog Mic AGC
3 ^ or v to Call Forward.
This feature controls the your radio's microphone gain
4 Press c to enable Call Forwarding. The display shows 9 automatically while transmitting on an analog system. It
suppresses loud audio or boosts soft audio to a preset value in
beside Enabled.
OR order to provide a consistent level of audio.
English
3 ^ or v to Radio Settings and press c to select. 5 Press c to enable Digital Mic AGC. The display shows 9
beside Enabled.
4 ^ or v to Analog Mic AGC. OR
5 Press c to enable Analog Mic AGC. The display shows 9 Press c to disable Digital Mic AGC. The 9 disappears
beside Enabled. from beside Enabled.
OR
Press c to disable Analog Mic AGC. The 9 disappears NOTE: At Step 3, you can also use < or > to change the
from beside Enabled. selected option.
NOTE: At Step 3, you can also use < or > to change the Intelligent Audio
selected option. Your radio automatically adjusts its audio volume to overcome
current background noise in the environment, inclusive of both
Digital Mic AGC stationary and non-stationary noise sources. This feature is a
Receive-only feature and does not affect Transmit audio.
This feature controls the your radio's microphone gain
Advanced Features
automatically while transmitting on an digital system. It NOTE: This feature is not applicable during a Bluetooth
suppresses loud audio or boosts soft audio to a preset value in session.
order to provide a consistent level of audio.
Use the following features to toggle Intelligent Audio on or off.
Procedure:
Procedure:
1 c to access the menu.
Press the programmed Intelligent Audio button to toggle the
2 ^ or v to Utilities and press c to select. feature on or off.
OR
3 ^ or v to Radio Settings and press c to select. Follow the procedure below.
English
3 ^ or v to Radio Settings and press c to select. Press the programmed GPS button to toggle the feature on or
off.
4 ^ or v to Intelligent Audio. OR
Advanced Features
5 Press c to enable Intelligent Audio. The display shows 9 1 c to access the menu.
beside Enabled.
2 ^ or v to Utilities and press c to select.
OR
Press c to disable Intelligent Audio. The 9 disappears 3 ^ or v to Radio Settings and press c to select.
from beside Enabled.
4 ^ or v to GPS.
NOTE: At Step 3, you can also use < or > to change the 5 Press c to enable GPS. The display shows 9 beside
selected option. Enabled.
See Accessories on page 99 for recommended OR
Bluetooth-enabled audio accessories with in-built Automatic Press c to disable GPS. The 9 disappears from beside
Volume Control for similar performance. Enabled.
English
Firmware and Codeplug Versions Checking the Radio Alias and ID
GPS Information Displays the ID of your radio.
NOTE: Press d at any time to return to the previous screen Procedure:
Press the programmed Radio Alias and ID button to check your
or long press d to return to the Home screen. The
radio alias and ID. You hear a positive indicator tone.
radio exits the current screen once the inactivity timer
OR
expires.
Follow the procedure below.
Accessing the Battery Information
1 c to access the menu.
Displays information on your radio battery.
2 ^ or v to Utilities and press c to select.
Procedure:
1 c to access the menu. 3 ^ or v to Radio Info and press c to select.
4 ^ or v to My Number and press c to select.
2 ^ or v to Utilities and press c to select.
Advanced Features
5 The first line of the display shows the radio alias. The
3 ^ or v to Radio Info and press c to select. second line of the display shows the radio ID
4 ^ or v to Battery Info and press c to select. You can also press the programmed Radio Alias and ID button
to return to the previous screen.
5 The display shows the battery information.
OR Checking the Firmware Version and Codeplug
For IMPRES batteries ONLY: The display reads
Version
Recondition Battery if the battery requires
reconditioning in an IMPRES charger. Displays the firmware and codeplug versions on your radio.
After the reconditioning process, the display then shows the
Procedure:
battery information.
1 c to access the menu.
96
English
2 ^ or v to Utilities and press c to select. 3 ^ or v to Radio Info and press c to select.
3 ^ or v to Radio Info and press c to select. 4 ^ or v to GPS Info and press c to select.
Advanced Features
4 ^ or v to Versions and press c to select. 5 ^ or v to the required item and press c to select.
5 The display shows the current firmware and codeplug 6 The display shows the requested GPS information.
versions.
See GPS on page 95 for details on GPS.
English
Front Panel Programming (FPP)
Your radio is able to customize certain feature parameters to
enhance the use of your radio. This feature is only available to
radios in dealer mode.
screen.
English
Antennas
Accessories
UHF, 403 527 MHz, Whip Antenna (PMAE4068_)
Accessories
Your radio is compatible with the accessories listed in this
chapter. Contact your dealer for details. UHF, 403 450 MHz, Stubby Antenna (PMAE4069_)
Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 99 UHF, 440 490 MHz, Stubby Antenna (PMAE4070_)
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 99
Carry Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 100
UHF, 470 527 MHz, Stubby Antenna (PMAE4071_)
Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 100 VHF, 144 165 MHz, Helical Antenna (PMAD4116_)
Earbuds and Earpieces . . . . . . . . . . . . . . . . . . . . . . . page 101 VHF, 136 155 MHz, Helical Antenna (PMAD4117_)
Headsets and Headset Accessories . . . . . . . . . . . . . page 100
VHF, 152 174 MHz, Helical Antenna (PMAD4118_)
Remote Speaker Microphones . . . . . . . . . . . . . . . . . page 102
Surveillance Accessories. . . . . . . . . . . . . . . . . . . . . . page 102 VHF, 136 148 MHz, Stubby Antenna (PMAD4119_)
Miscellaneous Accessories . . . . . . . . . . . . . . . . . . . . page 103 VHF, 146 160 MHz, Stubby Antenna (PMAD4120_)
VHF, 160 174 MHz, Stubby Antenna (PMAD4121_)
Batteries
English
Carry Devices IMPRES Multi-Unit Charger with Display 110230 V, EU Cord
(WPLN4220_)
2.5-Inch Replacement Swivel Belt Loop (PMLN5610_) IMPRES Multi-Unit Charger with Display 110230 V, UK Cord
3-Inch Replacement Swivel Belt Loop (PMLN5611_) (WPLN4221_)
Hard Leather Carry Case with 3-Inch Fixed Belt Loop for IMPRES Single-Unit Charger (WPLN4232_)
Full-Keypad Radio (PMLN5838_) IMPRES Single-Unit Charger, UK Plug (WPLN4233_)
Hard Leather Carry Case with 3-Inch Swivel Belt Loop for IMPRES Single-Unit Charger, EURO Plug (WPLN4234_)
Full-Keypad Radio (PMLN5840_)
Core Single-Unit Charger (NNTN8117_)
Hard Leather Carry Case with 2.5-Inch Swivel Belt Loop for
Full-Keypad and Limited-Keypad Radio (PMLN5842_) IMPRES Vehicular Charger (NNTN7616_)
Nylon Carry Case with 3-Inch Fixed Belt Loop for Full-Keypad IMPRES Battery Reader (NNTN7392_)
and Limited-Keypad Radio (PMLN5844_)
Belt Clip for 2-Inch Belt Width (PMLN4651_) Headsets and Headset Accessories
Belt Clip for 2.5-Inch Belt Width (PMLN7008_)
Ultra-Lite Headset (PMLN5102_)
Chargers Heavy Duty Noise-Canceling Headset (PMLN5275_)
Accessories
English
Non-Secure HK200 Mobile Bluetooth Headset with UK Plug Earbuds and Earpieces
(ASMHK200VP-GB2A)
Non-Secure HK200 Mobile Bluetooth Headset with Euro Plug Receive-Only Earbud (AARLN4885_)
Accessories
(ASMHK200-GB3A) Receive-Only Earbud (MDRLN4885_)
Non-Secure HK200 Mobile Bluetooth Headset with Korea D-Shell Receive-Only Earpiece (PMLN4620_)
Plug (ASMHK200-KR2A)
Receive-Only Earpiece (RLN4941_)
Non-Secure HK200 Mobile Bluetooth Headset with China
Plug (ASMHK200-CN2A) Standard Earpiece, Black (RLN6279_)
Non-Secure HK200 Mobile Bluetooth Headset with Australia Standard Earpiece, Beige (RLN6280_)
Plug (ASMHK200-AU2A)
Earpiece with Acoustic Tube Assembly, Beige (RLN6284_)
Earpiece with Acoustic Tube Assembly, Black (RLN6285_)
Earpiece with High Noise Kit, Beige (RLN6288_)
Earpiece with High Noise Kit, Black (RLN6289_)
1-Wire Earbud, 29cm Cord, Black (NNTN8294_)
Over-the-Ear Receiver for Remote Speaker Microphone
(WADN4190_)
D-Shell Earset (PMLN5096_)
IMPRES Temple Transducer with In-line Push-to-Talk
(PMLN5101_)
Replacement Foam Ear Pad and Windscreen (RLN6283_)
Replacement Ear Seal Cloth Cover (1580376E32)
Replacement Boom Mic Windscreen (5080548E02)
101
English
Replacement Windscreen O-Ring (3280376E35) Surveillance Low Noise Kit (RLN5886_)
Surveillance High Noise Kit (RLN5887_)
Remote Speaker Microphones IMPRES 2-Wire Surveillance Kit, Black (RLN5880_)
Remote Speaker Microphone (PMMN4024_) IMPRES 2-Wire Surveillance Kit, Beige (RLN5881_)
IMPRES Remote Speaker Microphone (PMMN4025_) IMPRES 2-Wire Surveillance Kit with Clear, Comfortable
Acoustic Tube, Black (RLN5882_)
Remote Speaker Microphone, Submersible (IP57)
(PMMN4040_) IMPRES 2-Wire Surveillance Kit with Clear, Comfortable
Acoustic Tube, Beige (RLN5883_)
IMPRES Remote Speaker Microphone, with Volume, IP57
(PMMN4046_) IMPRES 3-Wire Surveillance, Black (PMLN5097_)
IMPRES Remote Speaker Microphone, with Earjack, Noise- IMPRES 3-Wire Surveillance, Beige (PMLN5106_)
Canceling (PMMN4050_) IMPRES 3-Wire Surveillance Kit with Clear, Comfortable
Remote Speaker Microphone Replacement Coil Cord Kit Acoustic Tube, Black (PMLN5111_)
(For Use with PMMN4024_ and PMMN4040_) (RLN6074_) IMPRES 3-Wire Surveillance Kit with Clear, Comfortable
Remote Speaker Microphone Replacement Coil Cord Kit Acoustic Tube, Beige (PMLN5112_)
(For Use with PMMN4025_, PMMN4046_, PMMN4050_) Replacement Foam Plugs, Pack of 50 (For Use with
Accessories
(RLN6075_)
RLN5886_) (RLN6281_)
Replacement Ear Tips, Clear, Pack of 50 (For Use with
Surveillance Accessories RLN5887_) (RLN6282_)
Small Custom Earpiece for Surveillance Kits, Right Ear
Receive-Only Surveillance Kit, Black (Single Wire) (RLN4760_)
(RLN5878_)
Medium Custom Earpiece for Surveillance Kits, Right Ear
Receive-Only Surveillance Kit, Beige (Single Wire) (RLN4761_)
(RLN5879_)
102
English
Large Custom Earpiece for Surveillance Kits, Right Ear Antenna Identification Band Grey (32012144001)
(RLN4762_)
Antenna Identification Band Yellow (32012144002)
Small Custom Earpiece for Surveillance Kits, Left Ear
Accessories
(RLN4763_) Antenna Identification Band Green (32012144003)
Medium Custom Earpiece for Surveillance Kits, Left Ear Antenna Identification Band Blue (32012144004)
(RLN4764_)
Antenna Identification Band Purple (32012144005)
Large Custom Earpiece for Surveillance Kits, Left Ear
(RLN4765_)
Miscellaneous Accessories
English
Notes
Notes
104
English
Motorola Solutions Malaysia Sdn Bhd (Co. No. 455657-H)
Plot 2 Bayan Lepas Technoplex Industrial Park
Mukim 12 S.W.D
11900 Penang, Malaysia
*68012003087*
68012003087-A