Sie sind auf Seite 1von 9

ESTIMATE

Details of Measurements & Bill of Quantities


NAME OF WORK- gScyd jksM dkyksuh fLFkr vkokl la0&,Q&14 esaa fdpu o ckFk:e
dk uohuhdj.k ,oa vU; ejEerh dk;ZA
SL. Measurement
ITEM OF WORK Qty. Unit Rate AMOUNT
No. No. L. B. H.
1 Dissmantling existing plaster including Racking
out joints of brick work in cement or lime mortar
to depth of 1 cm (3/8") including disposal of
refuse material as directed by Engineer-in-
charge with a distance of 60 met. (200 feet)

Wall 1X2 2.85 2.40 13.68 Sqm


1X2 1.85 2.40 8.88 Sqm
1X2 1.45 2.40 6.96 Sqm
Cilling 1X1 2.85 1.85 5.27 Sqm
1X1 1.85 1.45 2.68 Sqm
Bath wall 1X2 2.30 2.40 11.04 Sqm
1X2 1.80 2.40 8.64 Sqm
Cilling 1X1 2.30 1.80 4.14 Sqm
1X1 2.45 2.15 5.27 Sqm
Outer side R. wall 1X1 3.70 1.15 4.26 Sqm
70.82 Sqm 37.00 2620.25
2 Dismantling cement concrete or brick work or
granolithic floors including stacking of dismantled
materials as directed by Engineer-in-charge with
in a distance of 60mt. (200 feet)
Kit. Floor 1X1 2.85 1.85 5.27 Sqm
1X1 1.45 1.85 2.68 Sqm
Bath 1X1 2.3 1.80 4.14 Sqm
1X2 0.85 0.25 0.21 Sqm
12.31 Sqm 30.00 369.23
3 Providing and laying in cement concrete 1:4:8 (1
cement : 4C. sand : 8 graded stone grit
aggregate 40mm. nominal size) and curing
complete, including cost of form work in
foundation and floors. (SI. No. 275)
1X1 2.85 1.85 0.10 0.53 Cum
1X1 1.45 1.85 0.10 0.27 Cum
Bath 1X1 2.30 1.80 0.10 0.41 Cum
out side C/Y 1X1 10.65 8.10 0.10 8.63 Cum
9.84 Cum 4300.00 42294.80

4 Providing & Fixing GI pipes complete with G.I.


fittings and clamps including making good the
walls etc. concealed pipe including painting with
anti corrosive bitumastic palnt, cutting chases
and making good the wall : 15 mm dia nominal
bore.(A/R)
1X8 6.00 48.00 Rmt 210.00 10080.00
5 S/F of H.C.I Nahani trap 100X75mm 4kg
size with C.P. Jali including supply of all
mateial, labour T&p etc. required for
proper completion of the work.
1X4 4.00 No. 598.00 2392.00
6 Providing and Fixing soil, waste and vent pipes
100mm dia sand cast iron S&S pipe asper
IS1729 Neco make.
1X5 1.80 9.00 Rmt. 922.00 8298.00
7 15mm. thick Cement Plaster in single coat on
wall with 1:6 (1 cement : 6 coarse sand) mortar
finished even and smooth including rounded
angle upto 80mm. also including s/o all
materials, labour, T&P etc. required for proper
completion of the work.
Qty. same as item no. 1 70.82 Sqm 129.00 9135.46
8 First class brick on edge floor laid dry joints sand
filled including preparation of base to proper
slope and its ramming and including supply of all
materials, labour and T&P etc. required for
proper completion of the work.
C/y 1X1 10.65 8.10 86.27 Sqm
1X1 5.10 2.6 13.26 Sqm
99.53 Sqm 476.00 47373.90
9 Providing and Fixing of 580mm Orrisa Pan
with 100mm sand cast iron P or S trap
including removal of old pan etc. including
s/o all material, labour, T&P etc. required
forp proper completion of the work.(A/R)
1X1 1.00 Each 2338.00 2338.00
10 25mm thick C.C. flooring 1:2:4 (1 cement : 2
coarse sand : 4 stone grit) including s/o all
material, labour T&P etc. (A/R)
Qty. same as above item no. 2 12.31 Sqm
1X1 10.65 8.10 86.27 Sqm
98.57 Sqm 212.00 20897.37
11 P/L 20 mm white albetta stone flooring over
25 mm thick base of cement mortar 1:4 (1
cement : 4 coarse sand) alon with sunthetic
Triangular fibre of cut length 6 mm,
speccific gravity 1.34, dosage @ 125 gms.
50Kgs of Cement (Recron 3s of with white
cement slury including rubbing and
polishing complete.(S/R)
1X1 2.85 0.65 1.85 Sqm
1X1 1.85 0.65 1.20 Sqm
3.06 Sqm 1750.00 5346.25
12 Supply and fixing of steel kitchen sink
600X450X200mm out with drain board, with C.P.
jali, P.V.C. waste pipe, bracket, including supply
of all material, labour, T&P etc. for proper
completion of work. (A/R)
1X1 1.00 No. 3132.00 3132.00
13 Providing and fixing 1st quality ceramic glazed
wall tiles (bell/kajaria/somany) conforming to IS:
15622 (thickness to be specified by the
manufacturer), of approved make, in all colours,
shades except burjundy, bottle green, black of
any size as approved by Engineer-in-charge, in
skirting, risers of steps and dados, over 12mm
thick bed of cement mortar 1:3 (1cement: 3
coarse sand) and jointing with grey cement slurry
@ 3.3 kg per sqm including pointing in white
cement mixed with pigment of matching shade
complete. (Size of 200X300mm (A/R)

Flooring kit. 1X1 2.85 1.85 5.27 Sqm


Bath 1X1 1.45 1.85 2.68 Sqm
1X1 2.30 1.80 4.14 Sqm
1X2 0.85 0.25 0.21 Sqm
1X2 2.85 2.00 11.40 Sqm
1X2 1.85 2.00 7.40 Sqm
1X2 1.45 2.00 5.80 Sqm
1X2 2.30 2.00 9.20 Sqm
1X2 1.80 2.00 7.20 Sqm
53.31 Sqm 833.00 44405.15
14 Supply and Fixing of P.V.C. low level cistern with
all internal fittings M.S. bracket, P.V.C.
Conection, C.P. angle valve 15mm. dia., brass
ball cock complete including supply of all
materials, labour, T&P etc. required for proper
completion of the work. (A/R)

1X1 1.00 N0 1427.00 1427.00


15 Providing and fixing mirror of atul make with
indian polish of 600X450mm dia size with
bevelled edge complete with hard board sheet
with clips for mirror 600X450mm fixed with C.P.
brass screws and washers complete. (A/R)

1X2 2.00 N0 951.00 1902.00


16 Supply and Fixing of white glazed earthen ware
wash hand basin's with C.P. jali, angle valve,
P.V.C. waste pipe, piller cock, brecket etc.
complete including supply of all materials, labour,
T&P etc. required for proper completion of the
work. (22"X16") (A/R)

1X2 2.00 N0 2732.00 5464.00


17 Supply and fixing of C.P. Hand shower 100mm
dia heavy quality. (S.R)
1X1 1.00 No. 787.00 787.00
18 Providing and fixing C.P. Brass towel rail
450X20mm including supply of all material,
labour T&P etc. required for proper completion of
the work. (S.R)
1X2 2.00 N0 442.00 884.00
19 Providing and fixing C.P. brass bib cock
Equivalent including supply of all material, labour
T&P etc. required for proper completion of the
work. (S.R.)
1X4 4.00 N0
1X2 2.00 N0
6.00 N0 590.00 3540.00
20 Providing and fixing of C.P. soap dish including
supply of of all material, labour T&P etc. required
for proper completion of the work. (M.R.).
1X2 2.00 N0 250.00 500.00
21 S/F of salwood framed wrought including simple
moulding traight work chaukhat fram incuding s/o
all material, labour T&P etc. (A/R)
For door 1X5X2 2.05 0.075 0.12 0.18 Cum
1X5 1.10 0.075 0.12 0.05 Cum
For window 1X4X2 1.35 0.075 0.12 0.10 Cum
1X4X2 1.05 0.075 0.12 0.08 Cum
0.41 Cum 64772.00 26349.25
22 Supply & fixing 32mm thick of flush doors shutter
commercial quality including fixing of wooden
cleats of necessary screw to be paid seperatly).
(A/R)
1X5 0.95 1.95 9.26 Sqm 1431.00 13254.64
23 Providing and fixing glazed shutters for
doors, windows and clerestory windows
using 4 mm thick float glass panes including
ISI marked stainless steel butt hinges of
required size with necessary screws. Sall
wood. 35 mm thick
1X4 0.90 1.20 4.32 No. 2216.00 9573.12
24 Providing and fixing wire gauge shutters
using galvanized M.S. wire gauge of
average width of aperture 1.4mm in both
directions with wire of dia 0.3mm, for doors,
windows and clerstory windows with hinges
and necessary screws, 30mm thick
shutters, with ISI marked stainless steel butt
hinges of required size sall wood.(A/R

10 Door 1X5 0.95 1.95 9.26 Sqm


Window 1X4 0.90 1.20 4.32 Sqm
13.58 Sqm 1760.00 23905.20
25 Supply and fixing of door fitting's as Handle,
sliding bolt, tower etc. including cost of
material, labour, T&P etc. complete. (A/R)

Flush jali door 1X5 0.95 1.95 9.26 Sqm 347.00 3214.09
26 Painting two coat over priming paint one coat on
new surface including s/o all material, labour
T&P etc. complete. (S/R)
Chaukhat 1X5X2 0.39 2.05 8.00 Sqm
1X5 0.39 1.10 2.15 Sqm
1X4X2 0.39 1.35 4.21 Sqm
1X4X2 0.39 1.05 3.28 Sqm
Flush door 1X5X2 0.95 1.95 18.53 Sqm
Jali door 1X5 0.95 1.95 9.26 Sqm
1X4X2 0.90 1.20 8.64 Sqm
54.06 Sqm 60.00 3243.33
27 Mild Steel or Iron work of small sizes and
sections such as holding dwon bolts, hold fasts,
tie, rods, gratings etc. (when not including in an
over all rates) wrought to required form, including
supply of steel, bolts, nuts and wastage etc. and
their fixing required for proper completion of the
work. (SI.No. 502)

35X5 Flat iron for hold fast 1X5X6 0.15 4.50 Rmt
1X4X4 0.15 2.40 Rmt
6.90 Rmt
@ 1.40 Kg. per Rmt 6.90 X 1.40 9.66 Kg. 66.00 637.56
28 Distempering( two coat) with oil bound distemper
of approved brand and manufacture and of
required shade on undecorated wall with one
coats white cement primer after thoroughly
brushing the surface to make free from mortar
dropping the other foreign matter and also
prepairing the surface even with Plaster of Paris
or approved synthetic material and sand papered
to make smooth including cost of all materials for
complete work. (S.I.No.650+650)
1X2 4.30 0.40 3.44 Sqm
1X2 1.85 0.40 1.48 Sqm
1X1 4.30 1.85 7.96 Sqm
1X2 2.30 0.40 1.84 Sqm
1X2 1.80 0.40 1.44 Sqm
1X1 2.30 1.80 4.14 Sqm
20.30 Sqm 56.00 1136.52
Total 294500.10

Junior Engineer Assistant Engineer Executive Engineer


Maint.Division No.1(Civil) Maint.Division No.1 (Civil) Maint.Division No.1 (Civil)
P.W.D. Lucknow P.W.D. Lucknow P.W.D. Lucknow

Das könnte Ihnen auch gefallen