Beruflich Dokumente
Kultur Dokumente
H
H
B
mm
fy N/mm 500 gm 1.15 Legend
Ly
steel
B
steel class A (Normal weight concrete)
Ly
C Lx Lx Lx
LOADING
Self Wt kN/m 7.08 erim Load 3.00 kN/m
+ Dead kN/m 1.30
Ly
Total Dead, gk kN/m 8.38 DEFLECTION CONTROL 3 or m o re
a p p r o x im a t e ly e q u a l s p a n s
Imposed qk kN/m 3.00 Min % top steel in col strips 0.13 % A
Design load, n kN/m 16.53 Same in top of middle strips? N
C
Indicative Bending Moments - X Direction (kNm per bay) Indicative Bending Moments - Y Direction (kNm per bay)
800 800
600 600
400 400
200 200
0 0
-200 -200
-400 -400
-600 -600
-800 -800
-1000 -1000
1 5 A E
MAIN STEEL INTERNAL COLUMN STRIPS MIDDLE STRIPS PERIMETER COLUMN STRIPS
X DIRECTION b REBAR b REBAR b REBAR
END SUPPORTS1.000 2H16 @ 500 T1 7.000 14H16 @ 500 T1 0.750 1H20 @ 750 T1
END SPANS 4.000 15H20 @ 250 B1 4.000 12H20 @ 325 B1 2.250 10H20 @ 225 B1
PENULTIMATE SUPPORTS 4.000 15H20 @ 200 : 400 T1 4.000 8H16 @ 500 T1 2.250 9H20 @ 175 : 350 T1
INTERIOR SPANS 4.000 10H20 @ 400 B1 4.000 8H20 @ 500 B1 2.250 7H20 @ 300 B1
INTERIOR SUPPORTS 4.000 10H20 @ 300 : 600 T1 4.000 8H16 @ 500 T1 2.250 6H20 @ 275 : 550 T1
Y DIRECTION
END SUPPORTS 1.000 2H16 @ 500 T2 7.000 14H16 @ 500 T2 0.750 2H16 @ 375 T2
END SPANS 4.000 19H20 @ 200 B2 4.000 16H20 @ 250 B2 2.250 11H20 @ 200 B2
PENULTIMATE SUPPORTS 4.000 16H20 @ 175 : 350 T2 4.000 6H20 @ 650 T2 2.250 9H20 @ 250 : 500 T2
INTERIOR SPANS 4.000 12H20 @ 325 B2 4.000 10H20 @ 400 B2 2.250 7H20 @ 300 B2
INTERIOR SUPPORTS 4.000 11H20 @ 250 : 500 T2 4.000 8H16 @ 500 T2 2.250 6H20 @ 375 : 750 T2
BTM STEEL End spans Int col 19 6 114 H 20 7000 2.466 1968.0
Y Middle 16 8 128 H 20 7000 2.466 2209.7
Edge col 11 4 44 H 20 7000 2.466 759.6
Int spans Int col 12 6 72 H 20 6550 2.466 1163.0
Middle 10 8 80 H 20 6550 2.466 1292.3
Edge col 7 4 28 H 20 6550 2.466 452.3
LONG SPANS
END SUPPORTS - Int Col strips - X basic M = 0.51663 b = 1.000
M 0.5166 0.5166 0.5166 0.5166 0.5166 0.51663 0.5166 0.5166
d 267 266 265 264 262 260 257.5 254
K 0.0002 0.0002 0.0002 0.0002 0.0002 0.00019 0.0002 0.0002
z 253.7 252.7 251.8 250.8 248.9 247.0 244.6 241.3
As 5 5 5 5 5 5 5 5
As min 390 390 390 390 390 390 390 390
No bars 14 8 5 4 2 2 1 1
Clear S 65.4 117.0 190.0 238.0 484.0 480.0 975.0 968.0
Max S 750.0 750.0 750.0 750.0 750.0 750.0 750.0 750.0
subclause (a) (a) (a) (a) (a) (a) (a) (a)
Ratio 0.0872 0.156 0.2533 0.3173 0.6453 0.64 0 0
6 8 10 12 16 20 25 32
= 16
357375151.xls Graphics
Made by rmw Job No R68
Date 8-Jun-17
4 End 5 0 6
4.8 5.6 6.4 7.2 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 0 0 0 0 0 0 0 0 0 0 0 0 0 0
20.8 21.6 22.4 23.2 24 24.8 25.6 26.4 27.2 28 28.8 29.6 30.4 31.2 32 32 32 32 32 32 32 32 32 32 32 32 32 32
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-455.2 -308.77 -77.691 238.03 638.4 194.07 -165.61 -440.64 -631 -736.78 -757.89 -694.35 -546.17 -313.34 4.133 0 0 0 0 0 0 0 0 0 0 0 0 0
4 5
638.4 727.94 4.133
4 End 5 0 6
4.8 5.6 6.4 7.2 0 0.8 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 0 0 0 0 0 0 0 0 0 0 0 0 0 0
20.8 21.6 22.4 23.2 24 24.8 25.6 26.4 27.2 28 28.8 29.6 30.4 31.2 32 32 32 32 32 32 32 32 32 32 32 32 32 32
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-455.2 -308.77 -77.691 238.03 638.4 194.07 -165.61 -440.64 -631 -736.78 -757.89 -694.35 -546.17 -313.34 4.133 0 0 0 0 0 0 0 0 0 0 0 0 0
D E
638.4 727.94 4.133
357375151.xls Graphics
Made by rmw Job No R68
Date 8-Jun-17
0 7 0 8 0 9
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 7 0 8 0 9
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
357375151.xls Graphics
Disclaimer
All advice or information from MPA-The Concrete Centre is intended for those who will evaluate the significance and limitations of its
contents and take responsibility for its use and application. No liability (including that for negligence) for any loss resulting from such advice
or information is accepted by MPA-The Concrete Centre or its subcontractors, suppliers or advisors. Users should note that all MPA-The
Concrete Centre software and publications are subject to revision from time to time and they should therefore ensure that they are in
possession of the latest version.
This spreadsheet should be used in compliance with the accompanying publication 'User Guide RC Spreadsheets: v4' available from The
Concrete Centre www.concretecentre.com/rcdesign Tel +44 (0)1276 606800
Status of spreadsheet This spreadsheet is shareware but may not be used for commercial purposes until the user
Public release version. has registered with The Concrete Centre using the licence validation form available on The
Concrete Centre website www.concretecentre.com/rcdesign