Beruflich Dokumente
Kultur Dokumente
The commercially available HyPM The HyPM Fuel Cell product family is
product family consists of a range of focused on enhancing customer value
hydrogen fuel cell power modules able with:
to deliver a variety of power outputs
depending on customer needs. Rapid response to load changes
The fully packaged design with simple Built-in advanced diagnostics and
electrical and mechanical interfaces controls
enable easy integration.
Design conforms to CSA, UL and IEC
Ranging from 4 to 65 kW electrical standards
power HyPM Power Modules are
configured for both mobility (HD) and Multiple modules configurable in series
stationary (XR) applications. or parallel
Features:
Available in power outputs of
4, 8 and 12 kW (unregulated DC)
Operates on hydrogen and air
Optimized BOP without humidification
subsystem
Water cooled
Built-in advanced diagnostics and
controls
CAN Bus interface
> 1000 hour life
Rack mountable
Designed in conformance with UL,
CSA and CE
Physical Dimensions (L x W x H) cm 87 x 50 x 32 87 x 50 x 32 96 x 50 x 32
in 34 x 20 x 13 34 x 20 x 13 38 x 20 x 13
Mass kg 80 80 90
lbs 177 177 198
Features:
Available in power outputs of
4, 8, 12, 16 and 65 kW (unregulated DC)
Operates on hydrogen and air
Water cooled
Built-in advanced diagnostics and
controls
CAN Bus interface
> 3000 hours lifetime
Compact and robust design to withstand
the demands of mobility applications
Physical Dimensions (L x W x H) cm 85 x 36 x 25 85 x 36 x 25 94 x 45 x 30 96 x 51 x 41 )
1
in 33 x 14 x 10 33 x 14 x 10 37 x 18 x 12 38 x 20 x 16
Mass kg 75 75 78 115 321
lbs 165 165 172 254 707
1
) 5 modules included: 2 stack modules, air delivery module, power electronics module, water pump module
Engineering & Application Integration
Hydrogen Supply
Solution
Thermal
Management Power
Solution Solution
We provide a full suite of services from For all your needs regarding your
conceptual design to full implementation. application we can design the best
This can be done in a consulting role with possible solution, including hydrogen
your designers and engineers or we can supply and energy storage as well as
supply a full turnkey solution. thermal management.
DC Power Solutions As with all PEM Fuel Cell systems, HyPM Power Modules require a voltage regulation since
the output voltage varies depending on the current drawn.
Our modular and scalable DC/DC Converter Solution gives you the flexibility for a wide range of applications.
Please ask for a customized offer.
AC Power Solutions The DC/AC Inverter converts the DC power from your HyPM Power Module into 110 or
230 V AC power. Grid-connected and off-grid versions are available.
Energy Storage Solutions Our Electrical Energy Storage Solutions enable both the hybridization for high peak loads and the supply of
external power for start-up.
Thermal Management The Thermal Management Solution keeps your HyPM Power Module always in optimal
Solutions thermal conditions. It comprises a suitable radiator or heat exchanger and all necessary
connectors and tubing.
Hydrogen Supply Solutions Our Compressed Hydrogen Cylinder Connecting Kit is required to connect HyPM Power Modules
to compressed hydrogen cylinders. It contains a single stage pressure regulator, a connecting tube
and a mounting panel for compressed gas cylinders. Available for DIN, CGAor BS cylinders.
Specifications and descriptions in this document were in effect at the time of publication (04/2007).
We reserve the right to change specifications or to discontinue products at any time.
HyPM is a registered trademark of Hydrogenics Corporation.