0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
2K Ansichten1 Seite
This inspection report summarizes the inspection of machinery for Oki Pulp & Paper. The report lists 21 items that were checked, including identification, cleaning, alignment, lubrication, seals, supports, and rotation. Any defects found are noted. Upon completion of the inspection, the equipment was released for commissioning by representatives of the contractor, supplier, and Oki Pulp & Paper.
This inspection report summarizes the inspection of machinery for Oki Pulp & Paper. The report lists 21 items that were checked, including identification, cleaning, alignment, lubrication, seals, supports, and rotation. Any defects found are noted. Upon completion of the inspection, the equipment was released for commissioning by representatives of the contractor, supplier, and Oki Pulp & Paper.
This inspection report summarizes the inspection of machinery for Oki Pulp & Paper. The report lists 21 items that were checked, including identification, cleaning, alignment, lubrication, seals, supports, and rotation. Any defects found are noted. Upon completion of the inspection, the equipment was released for commissioning by representatives of the contractor, supplier, and Oki Pulp & Paper.
Flow Subtance: Capacity (I/s): Head (MIc): Power (kW): Speed (r/min): Motor Name Palte Data Check bv Supplier
Power (kW): Speed (r/min): Date: Sign:
Check by Verified by Notes in Defect List Check List n/a Date Supplier Contractor Purchaser Mills 1 Identification (name plate / tagging) 2 Overall Cleaning 3 Confortmity with specifcation and drawings 4 Aligment/Alignment Report 5 Grouting Inspection 6 Belt and Chain tension 7 Inside Inspection 8 Auxiliary (utility/service) piping and fittings installation 9 Cooling Selling Sys 10 Accessories 11 Lubrication 12 Lubrication / Lubricant instruction / specification plate 13 Packet Stuffing Box 14 Mechanical Seal 15 Inlet and Outlet flange parallelism 16 Flange bolt tightening / torque 17 Supports 18 Manufacturer's name plate 19 Pressure Characteristic 20 Painting and Finishing 21 Free rotation (by hand) NOTE: Rotation test with motor will be made during commissoning Note: Defect List must be always enclosec The referred eguipmet has been inspected and is hereby released for commissioning. Date Sign Contractor Sign Supplier Sign OKI