0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
24 Ansichten2 Seiten
556 is an Automatic Transfer switch and mains controller with comprehensive instrumentation and load control features. It is used to monitor a mains supply and automatically start and stop the system's generating sets (controlled by DSE 550 load sharing controllers) the generating sets are used to ensure the mains load is kept below a specific, configurable level. No-break return to mains supply. The generator bus is voltage matched and synchronised with the returned mains supply to allow transfer back to mains with no
556 is an Automatic Transfer switch and mains controller with comprehensive instrumentation and load control features. It is used to monitor a mains supply and automatically start and stop the system's generating sets (controlled by DSE 550 load sharing controllers) the generating sets are used to ensure the mains load is kept below a specific, configurable level. No-break return to mains supply. The generator bus is voltage matched and synchronised with the returned mains supply to allow transfer back to mains with no
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als PDF, TXT herunterladen oder online auf Scribd lesen
556 is an Automatic Transfer switch and mains controller with comprehensive instrumentation and load control features. It is used to monitor a mains supply and automatically start and stop the system's generating sets (controlled by DSE 550 load sharing controllers) the generating sets are used to ensure the mains load is kept below a specific, configurable level. No-break return to mains supply. The generator bus is voltage matched and synchronised with the returned mains supply to allow transfer back to mains with no
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als PDF, TXT herunterladen oder online auf Scribd lesen
AM 28/10/03 Automatically senses mains The Model 556 is an Automatic (utility) failure and starts the backup generators (controlled by Transfer switch and Mains DSE model 550 controllers). controller with comprehensive instrumentation and load control Allows precise changes to be features. made to the generator bus/mains supply load share (import/export The module is used to monitor a mains control) supply and automatically start and Can maintain a specific mains stop the system’s generating sets (utility) or generator power factor. (controlled by DSE 550 load sharing controllers). It indicates the ATS / Peak lopping control for 550 controlled generator bus operational status by means of an SPECIFICATION LCD display, and LEDs on the front Will synchronise multiple 550 panel. DC Supply: controlled gensets with the 8V to 35V Continuous. returning mains (utility) supply to Able to survive 0V for 50mS, providing The system is used to ‘manage’ the provide no-break changeover supply was at least 10V before dropout generator bus, which is fed by DSE and supply recovers to 5V. This is back to the mains supply. 550 load sharing controllers. achieved without the need for internal ‘Soft transfer’ (load ramping) both batteries. to and from the generator supply. The 556 instructs the 550 controllers to make precise changes to the Max. Operating Current: Can be used to load test the generating set outputs which can be 513mA at 12V. 263mA at 24V. synchronised generator bus without removing power from the used in many applications including: Max. Standby Current: load. Peak lopping. The generating sets 370mA at 12V. 210mA at 24V. are used to ensure the mains load Clear, backlit LCD display to show is kept below a specific, Generator bus Input Range: the status of the load switches, configurable level. 15V(L-N) to 277V(L-N) AC (+20%) and mains (utility) supply as well as to annunciate alarm conditions No-break return to mains supply. Generator bus Input Frequency: should they occur. The generator bus is voltage 50Hz - 60Hz at rated engine speed matched and synchronised with (Minimum: 15V AC L-N) Integral, configurable starting and the returned mains supply to allow stopping timers. transfer back to mains with no Mains Sensing Input Range: Configurable inputs and outputs break in supply to the load. 15V(L-N) to 277V(L-N) AC (+20%) to help meet complex specifications. Selected operational sequences, Mains Sensing Input Frequency: 50Hz - 60 Hz (Minimum: 15V AC L-N) Integral log for viewing event timers and alarms can be altered by history. the customer. Alterations to the Auxiliary Relay Outputs: system are made using the 810 5 Amp DC at supply voltage. INSTRUMENTATION interface and a PC. This interface also provides real time diagnostic Generator bus loading Relay Output: The 556 module provides the following facilities. 8 Amp AC 250V – normally open. instrumentation LCD displays, accessed via the LCD PAGE and DISPLAY Mains loading Relay Output: Operation of the module is via 8 Amp AC 250V – changeover SCROLL push buttons: pushbutton controls (with security Mains Volts L1-N, L2-N, L3-N locking facility) mounted on the front Operating Temperature Range: Mains Volts L1-L2, L2-L3, L3-L1 panel with STOP/RESET, AUTO, -30°C to +70°C Mains Amps L1,L2,L3 Mains Frequency Hz TEST, MANUAL and START functions. The first four pushbuttons Dimensions: Mains kVA L1,L2,L3, Total 192mm x 144mm x 162.5mm Mains kW L1,L2,L3, Total feature LED ‘selected’ indications. Further pushbuttons provide (7.6” x 5.7” x 6.4”) Mains pf L1,L2,L3,Average Panel cutout: Mains kVAr L1,L2,L3, Total MUTE/LAMP TEST, LCD PAGE and DISPLAY SCROLL functions. 185mm x 138mm (7.3” x 5.5”) Mains KWh, KVAh, KVArh Mains Phase Sequence The 500 series modules have been Synchroscope Display The module features 32-Bit designed for front panel mounting. The Bus Volts L1-N, L2-N, L3-N Microprocessor control and a module is fitted into the cutout with the fixing Bus Volts L1-L2, L2-L3, L3-L1 comprehensive list of timers and pre- clips removed. These are then fitted from Bus Frequency Hz configured sequences. User the rear. Connection is via locking plug and Bus kW total and % of capacity socket connectors. configurable expansion facilities are Bus kVAr total and % of capacity also provided. Deep Sea Electronics reserve the right to change Bus Phase Sequence specification without prior notice. CASE DIMENSIONS
192mm x 144mm x 162.5mm (7.6” x 5.7” x 6.4”)
Panel cutout – 185mm x 138mm (7.3” x 5.5”)
144.0mm 137mm
155.0mm 185.0mm
192.0mm
7.5mm Panel Cu t-o ut:138mmx185mm
SINGLE LINE DIAGRAM OF TYPICAL MULTISET SYSTEM
Multiset Communications Link
From 1 to 16 sets can be connected to the MSC Link. Only three are shown for clarity For typical connections to the 556 controller, refer to the product AVR / Governor control Bus monitoring operators manual.
Generator breaker control Bus monitoring Mains monitoring
AVR / Governor control Bus monitoring
Bus and Mains
Breaker control
Generator breaker control
AVR / Governor control Bus monitoring
Generator breaker control
Deep Sea Electronics Plc. Deep Sea Electronics inc.
Highfield House, Hunmanby Industrial Estate, 5301 E. State St. – Suite 202 North Yorkshire. YO14 0PH. ENGLAND Rockford, Illinois 61108 U.S.A. Tel +44 (0)1723 890099. Phone +1 (815) 316-8706 Fax +44 (0)1723 893303. Fax +1 (815) 316-8708 Email - sales@deepseaplc.com Email – dsesales@deepseausa.com Web - www.deepseaplc.com Web – www.deepseausa.com