Beruflich Dokumente
Kultur Dokumente
1. Using standard CAD software, create a 3D solid model of Flange coupling and show the
following views: (i) Assembled right half sectional front view (ii) Exploded view (100)
2. Using standard CAD software, create a 3D solid model of Universal coupling and show
the following views: (i) Assembled right half sectional front view (ii) Exploded view
(100)
3. Using standard CAD software, create a 3D solid model of Knuckle joint and show the
following views: (i) Assembled right half sectional front view (ii) Exploded view (100)
4. Using standard CAD software, create a 3D solid model of Plummer block and show the
following views: (i) Assembled right half sectional front view (ii) Exploded view (100)
5. Using standard CAD software, create a 3D solid model of Lathe tail stock and show the
following views: (i) Assembled right half sectional front view (ii) Exploded view(100)
6. Using standard CAD software, create a 3D solid model of Screw Jack and show the
following views: (i) Assembled right half sectional front view (ii) Exploded view(100)
7. (a)Write manual part program for the part shown below and using a CNC machine
perform the following (i) Generate the tool path simulation (ii) Machine the profile on
the workpiece (80)
b) Describe the standard G codes for CNC turning process (20)
8. a) Write manual part program for the part shown below and using a CNC machine
perform the following (i) Generate the tool path simulation (ii) Machine the profile on
the workpiece (80)
b) Describe the standard M codes for CNC turning process (20)
9. a) Write manual part program for the part shown below and using a CNC machine
perform the following (i) Generate the tool path simulation (ii) Machine the profile on
the workpiece (80)
b) Describe the standard G codes for CNC milling process (20)
10. a) Write manual part program for the part shown below and using a CNC machine
perform the following (i) Generate the tool path simulation (ii) Machine the profile on
the workpiece (80)
b) Describe the standard M codes for CNC milling process (20)
Commands
Assembly/
used,
Aim Program Record Viva Total
Procedure/
Simulation
Program