Beruflich Dokumente
Kultur Dokumente
Zone de rparation /
Identification / Identification Conformit/Conformity Dfauts/Defects
C : conforme / Conform Repair Area
Diamtre/ Diameter (Inch)
Not Conform
Weld N
NC :non conforme/
Caniveaux/ Undercut
Soufflure/ Porosity
Corrosion /exessif
Soudure N /
Fissure / Crack
N Soudeur/
Piqure/ Hole
4 ISO-CORNERS Welds NA NA NA C: NC : No repair zone
C: NC:
C: NC :
C: NC :
C: NC :
C: NC :
Schma / Sketch:
Observation
All Iso-corners welds were MPI inspected before and after load test and all area was found to be free of surface defects at the time of inspection.
In accordance with BS7072 Regulations validity of this certificate is 12 months from last inspection.
L'Inspecteur CND PIC/ PIC NDT Inspector Vrifi par/ Checked by Client
SCHEMA/ SKETCH
CONCLUSION
A visual examination for general condition and a mangnetic particle inspection was carried out on the lifting point welds of the above mentioned itemt.
See attached MPI Report N: IE 0164/MT/107
No cracks or defects indication were noted at the time of inspection.
The undersigned, PIC Inspector, here by certify that the here above mentioned item was thoroughly examined, and the above particulars are correct.
It's to further certify that this lifting equipement complies in all respect with the oppropriate provisions and is free from defects affecting safety.
In the case of any modification of the equipement which has not been agreed upon with us in writing, this becomes invalid.
Examination of lifting equipement only-this does not include accessories or vehicle on which it is mounted.
Nom/ Name : Naim Arfa Nom/ Name : Brahim Drira Nom/ Name :
SCHEMA/ SKETCH
CONCLUSION
A visual examination for general condition and a mangnetic particle inspection was carried out on the lifting point welds of the above mentioned itemt.
See attached MPI Report N: IE 0164/MT/107
No cracks or defects indication were noted at the time of inspection.
The undersigned, PIC Inspector, here by certify that the here above mentioned item was thoroughly examined, and the above particulars are correct.
It's to further certify that this lifting equipement complies in all respect with the oppropriate provisions and is free from defects affecting safety.
In the case of any modification of the equipement which has not been agreed upon with us in writing, this becomes invalid.
Examination of lifting equipement only-this does not include accessories or vehicle on which it is mounted.