Beruflich Dokumente
Kultur Dokumente
The new GE Record SL Moulded Case Circuit Breaker family is a line of reliable, simple and easy to use protection devices for use in both
moderate or hot and humid conditions in low voltage distribution systems. Using the same basic design concepts, look and materials as
the comprehensive high performance Record Plus line, Record SL differs as it is focused on simplicity.
Three frame sizes are available, LD160 in 1 pole, 3 pole and 4 pole version, LE250 in 3 pole and 4 pole version and LJ800 in 3 pole and
4 pole. Each device is equipped with a thermal magnetic trip unit thus allowing them to be used to protect circuits against overloads
and short circuits up to a level of 40kA at 240V AC, 25kA at 415V AC, 12kA at 500V AC and 36kA (for LJ800). Record SL is fully certified in
accordance with the IEC 60947 standard and has NEMA AB1 interruption ratings.
LD160
The first frame size, the LD160 is available in a current range
of 16A to 160A calibrated for use at an ambient temperature
of 400 C or 500 C. The device has been designed for use in both
commercial and industrial applications and can be connected
and supplied either from the top or bottom terminals. Without
impairing performance LD160s can be mounted side by side with
zero clearance in horizontal or vertical position. Each breaker is
supplied with a fixed thermal and magnetic protection device and
is equipped with box terminals suited for the direct connection of
both copper and aluminium cables. Simple to use and mount, the
device has two front panel cutouts. One matching that of Miniature
Circuit Breakers (45mm) and a 2nd option (64mm) matching that of
the LE250 frame size.
LE250
The second frame size, LE250 is available in a current range of 125A
to 250A calibrated for use at an ambient temperature of 400 C or
500 C. The device has been designed for use in both commercial
and industrial applications and can be connected from the top or
bottom terminals. Designed for side by side mounting with zero
clearance LE250s can be mounted in the horizontal or vertical
position without impairing performance. Each breaker has an
adjustable thermal and fixed magnetic protection device and is
equipped with easily accessible connection pads for Busbars or
Ring terminals. Simple to use and mount, the device comes with a
front panel cut-out matching that of the LD160 frame size (64mm).
LJ800
The LJ800 is available in a current range of 500A to 800A calibrated
for use at an ambient temperature of 400 C or 500 C. The device
has been designed for use in both commercial and industrial
applications and can be connected either from the top or bottom
terminals. Designed for side by side mounting with zero clearance
LJ800s can be mounted in the horizontal or vertical position
without impairing performance. Each breaker has an adjustable
thermal and adjustable magnetic protection device and is equipped
with easily accessible connection pads for Busbars or Ring
terminals.
3
Moulded Case Circuit Breaker Type Record SL
LD160/LE250 accessories
Internal accessories safe and easy to install
Each Record SL breaker has two or more insulated accessory
compartments accessed by simply removing the break cover. Here
internal accessories supplied with 50cm length colour coded leads
can be mounted. The leads have a 1mm2 cross section and fit into
specifically designed outgoing routing channels provided in the
breaker. Shunt and Under Voltage Releases Electronic models.
Each Record SL breaker can be equipped with maximum of two
releases each available in three typical voltage ratings.
Power Consumption
LD160/LE250
Voltage
mA
UV SHT
110/120 V AC 10 920
220/240 V AC 10 320
380/415 V AC 10 215
4
Moulded Case Circuit Breaker Type Record SL
External accessories
Rotary handles
Record SL Rotary handles are mounted directly onto the breaker
front facia and allow the user to modify the standard top to bottom
toggle operation mode to a rotary operation. Two variants are
available, one with the operator on the breaker front and a second
with the operator mounted on the front of a door or panel. Both
variants have the OFF position at 9 Oclock and the ON position at
12 Oclock. All handles are equipped with a system allowing the
user to lock and padlock the breaker in OFF position.
Terminal shields
The LD160 and LE250 breaker types can be equipped with terminal
shields that allow an IP20 product finish.
Padlocking facility
Each 3 or 4 pole Record SL device can be equipped with a facility
that allows the user to padlock the breaker in its OFF position. A
maximum of three padlocks with a hasp diameter of 5 to 8 mm can
be used.
5
Moulded Case Circuit Breaker Type Record SL
LJ800 accessories
- Internal accessories
Each breaker can be equipped with a number of internal
accessories.
Auxiliary contacts
Change over contacts suitable for use at voltages up to 240V AC
and a current rating of 1A (resistive). Three configurations are
available, two with auxiliary contacts indicating the main breaker
contact position (AUX) and one with a Bell Alarm contact that
provides a breaker trip indication. (BAM)
Releases
Two types are available in three different voltage ratings. The first,
an under voltage release, trips the breaker if the voltage connected
to the device drops below 70% of its rating whilst the second , a
shunt release, trips the breaker when it is powered. The available
voltages for same are: 110V/120V AC, 220V/240V AC, 380V/415V AC.
External Accessories
Rotary Handles
The Rotary handles is mounted directly onto the breaker front
facia and allow the user to modify the standard top to bottom
toggle operation mode to a rotary operation. An extension shaft
and handle is then mounted on a door or panel. The handle has a
OFF position at 9 O clock and an ON position at 12 O clock and is
equipped with a system allowing the user to lock and padlock the
breaker in OFF position.
6
Moulded Case Circuit Breaker Type Record SL
Uimp
Rated impulse voltage 8 8 8 8 8
(Kilovolts)
Rated operational voltage Volts (AC) 500 500 500 500 500
Utilisation category A A A A A
400/415V AC 16 25 16 25 36 KA
440V AC 14 16 14 16 30 KA
500V AC 10 12 10 12 20 KA
240V AC Ip -- -- -- --
Service breaking capacity Ics (% of Icu) 75% 50% 75% 50% 75%
Thermal
Trip unit Fixed 0.7-1 x In 0.7-1 x In
setting (Ir)
Magnetic
Fixed Fixed 4-10 x In
setting (Im)
Fixed Front
Execution Fixed Front Connection Fixed Front Connection
Connection
7
Moulded Case Circuit Breaker Type Record SL
LD160 frame
LE250 frame
LD160 and LE250 types with extenders LD160 and LE250 types with rotary handle
8
Moulded Case Circuit Breaker Type Record SL
LJ800
Dimensional drawings .. Breaker Dimensional drawings .. Door mounted rotary handle
Release Settings
In Ith Im
500A 350-500A 2.0-
5.0kA
630A 300-630A 2.5-
6.3kA
800A 560-800A 3.2-
8.0kA
9
Moulded Case Circuit Breaker Type Record SL
Notes:
10
Moulded Case Circuit Breaker Type Record SL
Notes:
11
REGIONAL OFFICES BRANCH OFFICES
NORTH
Gurgaon Chandigarh Lucknow
GE India Industrial Pvt. Ltd. GE India Industrial Pvt. Ltd. GE India Industrial Pvt. Ltd.
5th Floor, Building No.7A SCO No. 72 & 73, First Floor 101, Ace Business Center
DLF Cyber City, DLF Phase-III Sector 8/C, Madhya Marg 19, Vidhan Sabha Marg
Sector 25 A, Gurgaon Chandigarh-160008 Lucknow-226001
Haryana 122002 Ph: (0172) 3982908-10 Ph: (0522) 3203808, 3012444/666
Ph: (0124) 4808000 Fax: (0172) 3982905 Fax: (0522) 4045909
Fax: (0124) 4226911 / 4226912
SOUTH
Bangalore Chennai Coimbatore Cochin Hyderabad
GE India Industrial Pvt. Ltd. GE India Industrial Pvt. Ltd. GE India Industrial Pvt. Ltd. GE India Industrial Pvt. Ltd. GE India Industrial Pvt. Ltd.
The Millenia, Level-6, Tower B Temple Tower, 6th Floor No.36/6 & 7, 1st Floor Mayur Business Center & Motel 5-2-45, Hyderbasti, RP Road
1 & 2, Murphy Road, Ulsoor 476, (New No. 672) Anna Salai Ashirwad Building Chittur Road, Pullepadi Junction Near Gujarati High School
Bangalore-560008 Nandanam D.B.Road, R.S. Puram Cochin-682035 Secunderabad-500003
Ph: (080) 41434000 Chennai-600035 Coimbatore-641002 Ph: (0484) 2364139 Ph: (040) 27543162, 66311264
Fax: (080) 41434199 Ph: (044) 45070470-84 Ph: (0422) 4393520 / 4393529 Fax: (0484) 4031400 Fax: (040) 66339272
Fax: (044) 45070474
WEST
Mumbai Ahmedabad Pune
GE India Industrial Pvt. Ltd. GE India Industrial Pvt. Ltd. GE Money Financial Services Limited
361/362, Solitaire Corporate Park 405-406, Kirtiman Complex Shop No. 405-410, 4th Floor
M. Vasanji Road, Chakala Kinariwala House, Behind Citibank City Point, Dhole Patil Road
Andheri (E), Mumbai-400093 Off C.G. Road, Ahmedabad-380006 Pune-411001
Ph: (022) 40101610 Ph: (079) 65427385/65427389 Ph: (020) 41266999
Fax: (022) 40101611 Fax: (079) 26460637 Fax: (020) 41266109
EAST
1109/MCCB/BRO/R SL
Kolkata
We are committed to continuous development and improvement of our products and the specifications are
subject to change without notice. For product availability and latest prices, please contact GE Sales Team.
For any further information, visit us at http://www.geindustrial.com
g and General Electric are registered trade marks of General Electric Co. USA