Sie sind auf Seite 1von 4

Project ProNo.

Page
1

Item
1

Halfen HTA-CE anchor channel - CEN/TS 1992-4


Halfen Design Software HTA, Version 2.50

The design - including the static values - does only apply to the designated HALFEN product. The
load bearing capacity of third party products, appearing to be identical in construction, might
differ. For this reason, the software provider does not extend warranty if external products are
used.

Input data
Anchor channel HTA-CE 50/30P - FV - 150 / 2, 2 anchors
Channel bolt HS 50/30 M 16 FV 4.6
Approval / Design method CEN/TS 1992-4
Shear force without lever arm
Concrete C30/37, un-cracked
Reinforcement no dense reinforcement
edge reinforcement no edge reinforcement
NEd,1

xs1

VEd,1
HALFEN GmbH, Langenfeld, Germany

h = 150 mm l = 150 mm
cnom = 20 mm

Adjusting zone : full variability

Bolt xs1 /ss NEd VEd Bolt ss NEd VEd


[mm] [kN] [kN] [mm] [kN] [kN]
1 75 8.00 19.00

Utilisation: 86% - Proof successful

HTA 2.50
11/06/2017
Project ProNo. Page
2

Item
1

Calculation Summary

Verifications for T-bolt


Tension NRd,s,s 25%
Shear VRd,s,s 84%
Combined load NRd,s,s - VRd,s,s 77%

Verifications for cast-in channels


Channel lips - Tension NRd,s,l 37%
Channel lips - Shear VRd,s,l 85%
Combined load NRd,s,l - VRd,s,l 86%

Local flexure of channel MRd,s,flex 7%

Connection between anchor and channel (Tension) NRd,s,c 23%


Connection between anchor and channel (Shear) VRd,s,c 55%
Combined load NRd,s,c - VRd,s,c 35%

Verifications for concrete


Tension - Pull-out failure NRd,cp 9%
Tension - Concrete cone failure NRd,c 15%
Shear - Concrete edge failure VRd,c N/A
Shear - Pry-out failure VRd,cp 18%
Shear - Concrete edge failure, load parallel to edge VRd,c90 N/A
Combined load NRd,c - VRd,c N/A
Combined load NRd,c - VRd,cp 13%
Combined load NRd,c - VRd,c90 N/A

Verifications:

Steel

Channel bolt
Maximum tension load (bolt): Bolt 1
NRk,s,s [kN] Ms NRd,s,s [kN] NEd [kN] N

62.8 2.00 31.4 8 0.25

Maximum shear load without lever arm (bolt): Bolt 1


VRk,s,s [kN] Ms VRd,s,s [kN] VEd [kN] V
HALFEN GmbH, Langenfeld, Germany

37.7 1.67 22.57 19 0.84

Combined loading, most unfavourable bolt: 1


2 2
NEd [kN] N VEd [kN] V N + V

8 0.25 19 0.84 0.77

HTA 2.50
11/06/2017
Project ProNo. Page
3

Item
1

Anchor channel, channel lips


Maximum tension load (bolt): Bolt 1
NRk,s,l [kN] Ms NRd,s,l [kN] NEd [kN] N

39 1.8 21.67 8 0.37

Maximum shear load without lever arm (bolt): Bolt 1


VRk,s,l [kN] Ms VRd,s,l [kN] VEd [kN] V

40.3 1.8 22.39 19 0.85

Combined loading, most unfavourable bolt: 1


2 2
NEd [kN] N VEd [kN] V N + V

8 0.37 19 0.85 0.86

Flexure of channel
Decisive span between anchors 1 and anchors 2

NEd,1 [kN] load position [mm]

8 75

MEd [Nm] MRk,s,flex [Nm] Ms,flex MRd,s,flex [Nm] flex

160.00 2,803.00 1.15 2,437.39 0.07

Connection between anchor and channel


most unfavourable anchor: 1, load position xs1 = 35 mm
NRk,s,c [kN] Ms,ca NRd,s,c [kN] NEd [kN] N

39 1.8 21.67 5 0.23

most unfavourable anchor: 1, load position xs1 = 35 mm


VRk,s,c [kN] Ms,ca VRd,s,c [kN] VEd [kN] V

39 1.8 21.67 11.87 0.55

most unfavourable anchor: 1, load position xs1 = 35 mm


HALFEN GmbH, Langenfeld, Germany

2 2
NEd [kN] N VEd [kN] V N + V

5 0.23 11.87 0.55 0.35

Concrete

HTA 2.50
11/06/2017
Project ProNo. Page
4

Item
1

Tensile load - Pull-out failure


most unfavourable anchor: 1, load position xs1 = 35 mm
NRk,cp [kN] M,cp NRd,cp [kN] NEd [kN] N

82.19 1.5 54.79 5 0.09

NRk,p(C12/15) [kN] ucr,N

23.8 1.4

Tensile load - Concrete cone failure


most unfavourable anchor: 1, load position xs1 = 35 mm
NRk,c [kN] M,c NRd,c [kN] NEd [kN] N

50.42 1.5 33.61 5 0.15

N0Rk,c [kN] scr,N [mm] s,N ccr,N [mm] e,N c,N re,N ucr,N

51.91 431 0.69 216 1.00 1.00 1 1.4

Shear load - Pry-out failure


most unfavourable anchor: 1, load position xs1 = 35 mm
VRk,cp [kN] Mc VRd,cp [kN] VEd [kN] V

100.84 1.5 67.23 11.87 0.18

s,N(cp) k5

0.63 2

Combined loading
most unfavourable anchor: 1, load position xs1 = 35 mm
VRk,cp [kN] Mcp VRd,cp [kN] VEd [kN]

100.84 1.5 67.23 11.87

K5 NRk,c [kN]
HALFEN GmbH, Langenfeld, Germany

2 50.42
1,5 1,5
N V N + V

0.15 0.18 0.13

HTA 2.50
11/06/2017

Das könnte Ihnen auch gefallen