Beruflich Dokumente
Kultur Dokumente
YES
YES
NO
NO ENSURE:
1. EC mirror harness power wire
is securely tapped into OEM
Is the zone location set to
Is the incorrect direction YES Is the mirror receiving harness.
your location?
displayed? +12V? 2. Ignition wire is receiving +12V.
3. Ground wire is securely
attached to vehicle ground.
YES
NO
SET ZONE:
1. Press and hold compass display /
power button (if available).
STILL NO
2. Release button when zone number
(1-15) is displayed.
3. Use zone map to verify your YES
location.
4. Use compass display / power
button to select correct zone. Contact OEM dealership /
5. Allow selected zone to clear from Mito Corp. for replacement
display. harness.
6. Press and hold compass display /
NO power button until C is displayed
CALIBRATE:
Follow calibration
instructions listed.
Calibrationinstructions:
1)IfthecompassdisplayreadsCthecompassfeaturemustbecalibrated.
a)Tocalibratethecompass,drivethevehicleinupto3completecirclesatlessthan5mph.
SettingtheCorrectZone
1. Pressthepowerbutton(ifavailable)formorethan9seconds,oruntilthecurrentZone.
2. FindyourcurrentlocationandvarianceZoneNumberonthezonemaponthepagesbelow.
3. Pressthepowerbutton(ifavailable)untilthenewdesiredZoneNumberappearsinthe
display.
4. Withinafewsecondsacompassdirectionwillbedisplayedandthenewzoneisset.
Note:Itisrecommendedtotakeyourvehicletoyourlocaldealershipifyourmirrordoesnothave
apowerbutton.
Note:Installingitemssuchasaskirack,antenna,luggagerack,orrecentbodyrepaircancause
changestothevehiclesmagneticfield.Thismayrequirethatthecompassberecalibratedby
performingtherecalibrationprocedure
NORTH AMERICA
EUROPE
ASIA
SOUTH AMERICA
AFRICA
AUSTRALIA