Beruflich Dokumente
Kultur Dokumente
Disclaimer
This brochure has been produced for you with the greatest of care. Nevertheless it The details are provided as unbinding general information and cannot substitute
is not possible to rule out mistakes completely. In such cases we cannot assume any detailed, individual consultation. Reprints even only of excerpts only allowed with the
liability. The contents correspond to the status on going to print. Deviations cannot explicit approval of GEA Bock GmbH. GEA Bock GmbH 2012
be ruled out because of the ongoing developement process for our products.
Vehicle compressors FK
Bock vehicle compressors of the FK range are the result of many years of experience in the
domain of mobile cooling systems.
The unsurpassed light, compact, robust design and wide r.p.m. range are only some of the
outstanding features of this unique product range of two, four and six cylinder compres-
sors.
A wide variety of designs can be tailored to suit individual requirements.
The so-called K version is a special innovation with a unique valve plate system for
maximum requirements in bus and coach air-conditioning systems.
Single-stage compressors
NH3 compressors
Compressor units for direct drive
NH3 Compressor units for direct drive
Duplex compressors
Bock duplex compressors are the simplest version of a parallel installation of two com-
pressors. The capacity can be controlled particularly efficiently by switching one of the
compressors on or off.
Further capacity gradation is possible, as desired with additional capacity control (cylin-
Our solutions are customer- der shut-off).
oriented and user-friendly,
because they are low-priced, For the compressor DHG12P DHG34e we offer the continuous variable speed control
energy-efficient, long-lasting of a compressor via a wired and connected frequency converter (option) that is directly
and tailored to your indivi mounted on the compressor. For all other compressors, an external Plug & Play solution
dual needs. for a frequency converter regulation is available.
Special features:
-- Adjacent set up
-- Each compressor has its own connection on the suction gas side (shut-off valve)
-- No separate oil-gas compensator required
-- Emergency operation with one compressor is possible in the event of a breakdown
Further information on scope of supply and accessories for the different compressors is
available in the brochure for semi-hermetic Bock compressors.
DHGX34e / 215 - 4 S
Motor variant 4)
Number of poles
Swept volume
e-series 3) 1) DHG = Duplex compressors Hermetic Gas-cooled (suction gas-cooled)
Number of cylinders 1) DHA = Duplex compressors Hermetic Air-cooled (air-cooled)
Size 2) X = Ester oil filling (HFC refrigerants e.g. R134a, R404A, R507, R407C)
Ester oil filling 2) 3) = Additional declaration for e-series and P = Pluscom compressors
Series 1) 4) S = More powerful motor e.g. air-conditioning applications
* PW = Part Winding, motors for part winding start 1 = 1. part winding 2 = 2. part winding
Explanations:
1 Tolerance ( 10%) relates to the mean value of the voltage Oil sump heater 110-240 V - 1 - 50/60 Hz (option)
range. Other voltages and current types on request. DHG(DHA)12P, DHG22e, DHA22P, DHG34e, DHA34P:
50-120 W, IP66
2 - T he specifications for max. power consumption apply for PTC heater, self-regulating, installation in housing bore
50Hz operation. For 60Hz operation, the specifications have
to be multiplied by the factor 1.2. Oil sump heater 230 V - 1 - 50/60 Hz (standard)
The max. working current remains unchanged. - DHG(DHA)4: 80 W, IP67
- T ake account of the max. operating current / max. power - DHG(DHA)5, DHG(DHA)6, DHG7: 140 W, IP67
consumption when designing contactors, leads and fuses. Permanently set version, installation in immersion sleeve
Switches: service category AC3
Fan motors for the HA version 230 V - 1 - 50/60 Hz
3 220-240 V / 380-420 V Y - 3 - 50 Hz - DHA12P: 40 W / 0,3 A, IP44
265-290 V / 440-480 V Y - 3 - 60 Hz - DHA22P, DHA34P: 72 W / 0,53 A, IP44
- DHA4, DHA5, DHA6: 140 W / 0,71 A, IP44
4 380-420 V Y/YY - 3 - 50 Hz PW
440-480 V Y/YY - 3 - 60 Hz PW
PW = Part Winding, motors for part winding start
(no start unloaders required)
- Winding ratio:
DHG(DHA)4, DHG(DHA)5, DHG(DHA)6 = 66% / 33%
- Designs for Y/ on request
5 380-420 V Y/YY - 3 - 50 Hz PW
440-480 V Y/YY - 3 - 60 Hz PW
PW = Part Winding, motors for part winding start
(no start unloaders required)
- Winding ratio: DHG7 = 60% / 40%
- Designs for Y/ on request
DV DV
ca.360
324
178
ca.135
DV DV
ca.390
344
195
ca.140
DV DV
ca.400
353
195
ca.120
DV DV
ca.505
378
270
195
SL
ca.690 (725) 870
ca.970
DV DV
ca.505
383
270
200
ca.160 (140)
508 120 (135) 485 4x 11
SL
ca.815 (830) 870
ca.970
DV DV
ca.505
383
270
ca.170
195
DV DV
ca.600
431
289
215
SL
ca.830 1150
1250
DV DV
ca.360
SL
324
178
52
70 208 4x 11
ca.460 650
ca.760
DV DV
ca.390
SL
343
195
52
113 223 4x 11
ca.545 650
ca.760
DV DV
ca.400
351
195
52
SL 125 4x 11
308 650
ca.575 ca.760
DV DV
ca.505
378
270
195
115
DV DV
ca.535
383
270
200
135
DV DV
ca.530
383
270
195
135
GEA Group is a global mechanical engineering company with multi-billion euro sales and operations
in more than 50 countries. Founded in 1881, the company is one of the largest providers of
innovative equipment and process technology. GEA Group is listed in the STOXX Europe 600 Index.
GEA Group AG. All rights reserved. 96231-02.2012-Gb Subject to change without notice Copyright GEA Bock