Beruflich Dokumente
Kultur Dokumente
6,799,408
COMBO
250XTC425
HEADER
250X425 INSERT
250XT162
Notes: 1 ****indicates that deflection criteria listed is met for load listed for stress check.
2. If ProX is subjected to Vertical and Horizontal loads, the Design Vertical Load divided by the
Allowable Vertical Load Stress plus the Design Horizontal Loads divided by the Allowable
Horizontal Loads Stress must be less than one.
3. Loads are working stress and have not been increased due to duration of loading.
Notes: 1 ****indicates that deflection criteria listed is met for load listed for stress check.
2. If ProX is subjected to Vertical and Horizontal loads, the Design Vertical Load divided by the
Allowable Vertical Load Stress plus the Design Horizontal Loads divided by the Allowable
Horizontal Loads Stress must be less than one.
3. Loads are working stress and have not been increased due to duration of loading.
Notes: 1 ****indicates that deflection criteria listed is met for load listed for stress check.
2. If ProX is subjected to Vertical and Horizontal loads, the Design Vertical Load divided by the
Allowable Vertical Load Stress plus the Design Horizontal Loads divided by the Allowable
Horizontal Loads Stress must be less than one.
3. Loads are working stress and have not been increased due to duration of loading.
COMBO
600XTC425
HEADER INSERT
600X425 600XT162
Notes: 1 ****indicates that deflection criteria listed is met for load listed for stress check.
2. If ProX is subjected to Vertical and Horizontal loads, the Design Vertical Load divided by the
Allowable Vertical Load Stress plus the Design Horizontal Loads divided by the Allowable
Horizontal Loads Stress must be less than one.
3. Loads are working stress and have not been increased due to duration of loading.
COMBO
600XTC425
HEADER INSERT
600X425 600XT162
COMBO
800XTC425
HEADER INSERT
800X425 800XT162
Notes: 1 ****indicates that deflection criteria listed is met for load listed for stress check.
2. If ProX is subjected to Vertical and Horizontal loads, the Design Vertical Load divided by the
Allowable Vertical Load Stress plus the Design Horizontal Loads divided by the Allowable
Horizontal Loads Stress must be less than one.
3. Loads are working stress and have not been increased due to duration of loading.
COMBO
800XTC425
HEADER INSERT
800X425 800XT162