Beruflich Dokumente
Kultur Dokumente
15-INCH MULTI-COLOR
HIGH-PERFORMANCE RADAR
Models FR-1505/1510/1525 MARK-3
R
The future today with FURUNO's electronics technology. Catalogue No. R-171c
FR-1505 MARK-3: 6 kW
FR-1510 MARK-3: 12 kW
FR-1525 MARK-3: 25 kW
The FURUNO FR-1505/1510/1525 MARK-3 X-band A wide choice of antenna types is offered to meet the
radars will reinforce Furuno's long established varying needs of individual installations. A high-
tradition of high performance and reliability. They speed scanner (42 rpm) is optionally available
meet the exacting international and national instead of standard 24 rpm.
performance standards for use on ships requiring a
Standard features include dual VRMs/EBLs where
radar with the display diameter of 180 mm.
No.1 EBL may be off-centered and has a range
The Video Plotter RP-17 is available when Radar
marker on it, true/relative target trails, echo stretch,
Mapping function is also required.
two target alarm zones, trackball for direct
The 1505/1510/1525 MARK-3 employ advanced range/bearing readout, EPA, quick restart of
video processing techniques for improved noise transmission in case of accidental power-off, etc.
rejection and automatic clutter suppression.
Two target alarm zones can be set in any sector at a
They also feature clearly distinguished target trails
desired range. Visual and audible warnings are
from real targets by different color tones and accurate
produced to warn of a target entering the target alarm
plotting, manually or automatically.
zone or preset CPA/TCPA zone.
Five presentation modes are available: Head-up,
The standard EPA (Electronic Plotting Aid) permits
Course-up, North-up, Head-up true bearing and True
you to plot up to 10 targets. For SOLAS Convention
Motion with appropriate heading and speed data in
ships, the Auto Plotter ARP-17 (ATA) and Video
IEC 61162 format.
Plotter RP-17 are optionally available.
Powerful Standard Features
Electronic plotting of 10 targets according to the Target acquisition: Automatic or manual acquisition of up to
new IMO and IEC standards. Automatically 20 targets in 0.2-32 nm
redraw vectors between manual plots, drops off Tracking range: 0.1-32 nm
vectors if not plotted more than 10 min as Vector length: 0.5, 1, 3, 6, 15, 30 min, true or relative
required by IMO/IEC. Audio-visual alarm: Produced against lost targets and threatening
targets
Target data display: Range, bearing, course, speed and CPA/TCPA
of a chosen target
Note: ARP-17 can be used for 24 rpm scanner only.
570 22.4"
37 kg 82 lb
DISPLAY UNIT RSB-0074/RTR-063/XN24AF:
1. Picture Tube 15-inch diagonal color CRT 40 kg 88 lb
Pixels: 1024 x 768 dots
Effective diameter: 185 mm
Echo color: Yellow or green echoes in 16 levels 4-15
240 9.5"
2. Presentation 470 18.5"
300 11.8"
Head-up, Course-up*, North-up*, Head-up true bearing*,
True motion** *Heading data required.
**Heading and speed data required. DISPLAY UNIT 134 5.3" 200 7.9"
4-12
3. Range Scales and Range Ring Intervals (nm)
Range: 0.125, 0.25, 0.5, 0.75, 1.5, 3, 6, 12, 24, 48, 96 29 kg, 64 lb
Rings: 0.025, 0.05, 0.1, 0.25, 0.25, 0.5, 1, 2, 4, 8, 16
200 7.9"
4. Minimum Range and discrimination
35 m
5. Accuracy
Range: 1% of range in use or 10 m, whichever is greater
Bearing: Better than 1
6. Echo Trails 611 24.1"
412 16.2"
True or relative echo trails in monotone or multilevel shading (Speed 487 19.2" 51 2.0" 465 18.3"
and heading data required for true echo trails)
Trail length: 15, 30 s, 1, 3, 6, 15, 30 min, or continuous
7. EPA (Electronic Plotting Aid)
355 14.0"
422 16.6"
Manual plotting of up to 10 targets with auto follow-up, true/rel
vectors with a specified vector length (30 s, 1, 3, 6, 15 or 30 min)
and target data readout (Speed and heading data required for true
vectors.)
8. Interface
Channel 1 Input: BWC, BWR, DBK, DBS, DBT, DPT, GGA, GLL,
HDG, HDM, MDA, MTW (*), RMA, RMB, RMC,
VBW, VTG, ZDA
Output: RSD (every 4 s), INTERCONNECTION DIAGRAM
TTL (When A/C RAIN control is pressed.) ANTENNA UNIT Performance Monitor
Channel 2 Input: DBK, DBS, DPT, MDA, MTW, VBW PM-30 (option)
Output: TTM
Channel 3 Input: HDB, HDM, HDT, VHW
Output: None
DISPLAY UNIT
9. Other Features
Automatic tuning, A/C sea/rain, Interference rejection, Second trace Gyro Interface
250V-MPYCY-5
echo suppression, Echo stretch, Heading line off (self-returning), Gyro
CO-SPEVV-SB-C Gyro Compass
Two VRMs, Two EBLs with true/rel bearing readout*, EBL/VRM Auto Plotter
offset, Instant day/night brilliance setting, Trackball cursor with range ARP-17 Converter
and true/rel bearing* plus L/L** readouts, Parallel index lines, Off- 250V-DPYCY-1.25
SDME
centering (up to 75% of range scale), Quick restart in case of Video Plotter
accidental power-off, Nav data display**, User-definable function RP-17 CO-SPEVV-SB-C
key EPFS
*Heading data required for true bearing readout.
**Nav data inputs required. Stepdown 2C 1.5 m
External Buzzer
Transformer
ENVIRONMENTAL CONDITIONS (Meets IEC 60945) RU-1803
Temperature: -25C to +70C (Antenna unit)
-15C to +55C (Display unit) * 24 rpm, 12/24/32 VDC or 115/230 VAC Optional Supply
(for FR-1505/1510 MARK-3)
POWER SUPPLY 24 rpm, 24/32 VDC or 115/230 VAC
12/24/32 VDC, 295 W max,or 115/230 VAC, 50/60 Hz, 1, 465 VA max. (for FR-1525 MARK-3)
440 VAC, 50/60 Hz with stepdown transformer RU-1803 440 VAC
* 42 rpm, 24/32 VDC or 115/230 VAC
(12 VDC for FR-1505/1510 MARK-3 only) * Specify when ordering
(for FR-1505/1510/1525 MARK-3)