Beruflich Dokumente
Kultur Dokumente
e.g.MSExcelInterviewQuestions Search
AutoCADTutorialandInterviewQuestionsandAnswersGuideprovideyouthebestwaytolearn
AutoCadandgetpreparationofanyjobofferedinAutoCadfield.AutoCADistheindustryleaderin
3DCADdesigning,drafting,modeling,architecturaldrawing,andengineeringsoftwareandourAuto
CadInterviewQuestionsandAnswerswillguideyouthatAutoCadisbestinclasscustomizable
and expendable CAD application. Build your knowledge by our AutoCad Tutorial plus Interview
QuestionsandAnswers
4 :: Which one of the following options of the UNDO command allows the undo facility to be Most Popular Quiz Categories:
disabled? (Answer.php?
a=Which_one_of_the_following_options_of_the_UNDO_command_allows_the_undo_facility_to_be_disabled)
Networking(/ Testing(/qui
(a)AUTO
Management JQuery(/qui
(b)CONTROL
(c)END WebTechnol SAT(Schola
(d)GROUP
BankPO(Pr CLanguage
Is This Answer Correct? 391 Yes 10 No PostYourAnswer
VerbalAbility SoftwareEn
5 :: Which one of the following commands forces AutoCAD to
revise the entire drawing taking into account the effect of
changes within the system? (Answer.php?
a=commands_forces_AutoCAD_to_revise_the_entire_drawing)
(a)CHANGE
(b)REDO
(c)REDRAW
InterviewQuestionsAn
(d)REGEN 21,683likes
Is This Answer Correct? 347 Yes 6 No PostYourAnswer
8 :: The MAXIMUM number of commands whose effect can be undone by the UNDO command is?
(Answer.php?
a=The_MAXIMUM_number_of_commands_whose_effect_can_be_undone_by_the_UNDO_command_is)
(a)256 Share This Page:
(b)1000
(c)allthecommandissuedsincethedrawingwasfirstcreated
(d)allcommandsissuedsincethedrawingwaslastloadedinto (http://www.facebook.com/share.php?
(http://www.twitter.com/home?
(http://www.linkedin.com/shareArt
(http://www.pinterest.com/glob
thedrawingeditor u=http://globalguideline.com/interview_questio
status=+http://globalguideline.com/int
mini=true&url=http://globalguidelin
questions
Is This Answer Correct? 188 Yes 1 No PostYourAnswer sc=AutoCAD_Interview_Questions_and_Answ
(https://plus.google.com/109575479305880
sc=AutoCAD_Interview_Questions_an
sc=AutoCAD_Interview_Questions
answers/followers/)
(http://feeds.feedburner.co
9 :: Which one of the following commands would be used to limit the movement of the cursor to
specified
increments? (Answer.php?
a=Which_one_of_the_following_commands_would_be_used_to_limit_the_movement_of_the_cursor_to_specified_increments)
(a)AXIS
(b)GRID
(c)ORTHO
(d)SNAP
Is This Answer Correct? 172 Yes 2 No PostYourAnswer
10 :: Which one of the following commands can be used to turn the grid through 45 degrees ?
(Answer.php?
a=Which_one_of_the_following_commands_can_be_used_to_turn_the_grid_through_45_degrees)
(a)AXIS
(b)GRID
(c)ROTATE
(d)UCS
Is This Answer Correct? 213 Yes 1 No PostYourAnswer
11 :: When producing a drawing of a site plan measuring 300m x 275m dimensions should be
entered to a
scale of? (Answer.php?
a=When_producing_a_drawing_of_a_site_plan_measuring_300m_x_275m_dimensions_should_be_entered_to_a_scale_of)
(a)1:1
(b)1:10
(c)1:100
(d)1:1000
Is This Answer Correct? 138 Yes 3 No PostYourAnswer
12 :: Which one of the following BEST defines a "prototype" or "template" drawing? (Answer.php?
a=Which_one_of_the_following_BEST_defines_a_prototype_or_template_drawing)
(a)thedrawingwhichiscurrentlybeingeditedbyAutoCAD
(b)adrawingusedtostorealibraryofstandardsymbols
(c)ameansofsettingtheinitialdrawingenvironmentfornewdrawings
(d)afilewhichholdsdetailsofthedisplay,digitiser,andplottersthatAutoCADiscurrently
configuredfor
Is This Answer Correct? 66 Yes 0 No PostYourAnswer
13 :: In order for the grid command to work correctly two settings have to be established.
(Answer.php?
a=In_order_for_the_grid_command_to_work_correctly_two_settings_have_to_be_established)
(a)Thecorrectlimitssetandanappropriatesettingofthegridvalueset
(b)LimitssettoONandanappropriatesettingofthegridvalueset
(c)SnapandOsnapset
(d)Gridmodeandosmodebothsetto1
Is This Answer Correct? 51 Yes 0 No PostYourAnswer
14 :: When using AutoCAD for the design of a mechanical component measuring 1000 mm by 500
mm, the
dimensions would normally be entered at a scale of? (Answer.php?
a=When_using_AutoCAD_for_the_design_of_a_mechanical_component_measuring_1000_mm_by_500_mm_the_dimensions_would_normally_be_entered_at_a_sca
(a)1:1
(b)1:2
(c)1:5
(d)1:10
Is This Answer Correct? 90 Yes 1 No PostYourAnswer
16 :: A house measures 15000 mm x 8000 mm in plan view. When drawing the plan view only
which one of
the following sets of limits would be BEST to use? (Answer.php?
a=When_drawing_the_plan_view_only_which_one_of_the_following_sets_of_limits_would_be_BEST_to_use)
(a)0,0/20000,15000
(b)0,0/20,15metres
(c)2000,2000/20000,15000
(d)2000,2000/15000,8000
Is This Answer Correct? 44 Yes 0 No PostYourAnswer
17 :: What option would be selected following the TEXT command to select a different type of text
to that
currently in use? (Answer.php?
a=What_option_would_be_selected_following_the_TEXT_command_to_select_a_different_type_of_text_to_that_currently_in_use)
(b)FONT
(c)SET
(d)STYLE
Is This Answer Correct? 43 Yes 1 No PostYourAnswer
21 :: The text option that prompts the user for two endpoints and then automatically calculates
the text height
and positions the text between the two points is chosen from this AutoCAD prompt
Align/Fit/Center/Middle/Right/TL/TC/TR/ML/MC/MR/BL/BC/BR
Which one is correct? (Answer.php?
a=prompts_the_user_for_two_endpoints_and_then_automatically_calculates_the_text_height)
(a)Center
(b)Align
(c)TR
(d)Fit
Is This Answer Correct? 26 Yes 1 No PostYourAnswer
22 :: Which of the following commands will NOT place some form of text within the drawing
(Answer.php?
a=Which_of_the_following_commands_will_NOT_place_some_form_of_text_within_the_drawing)
(a)MTEXT
(b)DTEXT
(c)STYLE
(d)ATTDEF
Is This Answer Correct? 28 Yes 0 No PostYourAnswer
24 :: The special character string that is used to print the diameter sign is (Answer.php?
a=The_special_character_string_that_is_used_to_print_the_diameter_sign_is)
(a)%%c
(b)%%d
(c)%dia
(d)c%%
Is This Answer Correct? 29 Yes 0 No PostYourAnswer
25 :: Which one of the following is the AutoCAD filename extension used to indicate a compiled
text font? (Answer.php?
a=Which_one_of_the_following_is_the_AutoCAD_filename_extension_used_to_indicate_a_compiled_text_font)
(a)HDX
(b)SHP
(c)SHX
(d)TXT
Is This Answer Correct? 27 Yes 1 No PostYourAnswer
27 :: The line types definitions are stored on the system with an extension of? (Answer.php?
a=The_line_types_definitions_are_stored_on_the_system_with_an_extension_of)
(a).LTT
(b).LSP
(c).LIN
(d).LAT
Is This Answer Correct? 25 Yes 0 No PostYourAnswer
28 :: Which one of the following key combinations is a standard windoze short cut that does not
28 :: Which one of the following key combinations is a standard windoze short cut that does not
relate to the
clipboard. (Answer.php?
a=Which_one_of_the_following_key_combinations_is_a_standard_windoze_short_cut_that_does_not_relate_to_the_clipboard)
(a)Ctrl+S
(b)Crtl+X
(c)Ctrl+V
(d)Ctrl+C
Is This Answer Correct? 21 Yes 0 No PostYourAnswer
29 :: The shortcuts or command alias that allows us to key in L and AutoCAD responds with LINE are
stored in
a file named (Answer.php?
a=The_shortcuts_or_command_alias_that_allows_us_to_key_in_L_and_AutoCAD_responds_with_LINE_are_stored_in_a_file_named)
(a)SHORTCUT.TXT
(b)ACAD.COM
(c)ACAD.PGP
(d)ACAD.EXE
Is This Answer Correct? 18 Yes 0 No PostYourAnswer
30 :: Which of the following key combinations issues the ISOPLANE command? (Answer.php?
a=Which_of_the_following_key_combinations_issues_the_ISOPLANE_command)
(a)CONTROLandTorF4
(b)CONTROLandEorF5
(c)CONTROLandDorF6
(d)CONTROLandIorF7
Is This Answer Correct? 24 Yes 0 No PostYourAnswer
32 :: Which one of the following key combinations will toggle SNAP? (Answer.php?
a=Which_one_of_the_following_key_combinations_will_toggle_SNAP)
(a)EitherF7orCONTROLandG
(b)EitherF6orCONTROLandD
(c)EitherF9orCONTROLandB
(d)EitherF8orCONTROLandO
Is This Answer Correct? 20 Yes 1 No PostYourAnswer
33 :: Which one of the following key combinations will toggle COORDS? (Answer.php?
a=Which_one_of_the_following_key_combinations_will_toggle_COORDS)
(a)EitherF7orCONTROLandG
(b)EitherF6orCONTROLandD
(c)EitherF9orCONTROLandB
(d)EitherF8orCONTROLandO
Is This Answer Correct? 18 Yes 0 No PostYourAnswer
34 :: When designing an integrated circuit measuring 5mm x 5mm the measurements should be
entered
using a scale of (Answer.php?
a=When_designing_an_integrated_circuit_measuring_5mm_x_5mm_the_measurements_should_be_entered_using_a_scale_of)
(a)1:1
(b)1:2
(c)1:10
(d)1:5
Is This Answer Correct? 20 Yes 0 No PostYourAnswer
35 :: Which one of the following best describes a "user co-ordinate System"? (Answer.php?
a=Which_one_of_the_following_best_describes_a_user_co_ordinate_System)
(a)Thepairofcoordinatepointswhichdefinethelowerleftandupper
rightcornersofthedrawingboundary
(b)Aseriesofcoordinatepointsstoredasvariablesforlateruseinthe
drawing
(c)Acoordinatesystemwhoseoriginislocatedanywhereinthree
dimensionalspace
(d)Themasterdatumfromwhichallmeasurementsaretaken.
Is This Answer Correct? 21 Yes 0 No PostYourAnswer
37 :: The position of a mouse on a surface is NOT directly related to the position of the screen
cursor. This
makes the mouse unsuitable for (Answer.php?
a=The_position_of_a_mouse_on_a_surface_is_NOT_directly_related_to_the_position_of_the_screen_cursor_This_makes_the_mouse_unsuitable_for)
(a)Selectingtwopointsonthescreenforalinedrawoperation.
(b)Tracinganexistingdrawing.
(c)Selectingmenuitemsonthescreen.
(d)Sketching.
Is This Answer Correct? 16 Yes 0 No PostYourAnswer
39 :: When drawing a digital watch measuring 30mm x 25mm, which one of the following would be
the BEST
set of drawing limits to use? (Answer.php?
a=When_drawing_a_digital_watch_measuring_30mm_x_25mm)
(a)0,0/40,35
(b)0,0/30,25
(c)0,0/100,100
(d)0,0/297,210
Is This Answer Correct? 14 Yes 0 No PostYourAnswer
40 :: To continue drawing a line from the last known point, enter (Answer.php?
a=To_continue_drawing_a_line_from_the_last_known_point_enter)
(a)0,0
(b)@
(c)Next
(d)aorb
Is This Answer Correct? 14 Yes 0 No PostYourAnswer
42 :: ou are designing a floor plan and know the length and angle of one of the wall segments to be
1500mm
and 30 degrees. This is to be followed by a wall 2000mm long at 90 degrees to the first.
Which one of the following is the correct input? (Answer.php?
a=You_are_designing_a_floor_plan_and_know_the_length_and_angle_of_one_of_the_wall_segments_to_be_1500mm_and_30_degrees_This_is_to_be_followed_b
Whichoneofthefollowingisthecorrectinput?
(a)@1500,30@2000<120
(b)1500<30@2000<90
(c)@1500<30@2000<90
(d)@1500<30@2000<120
Is This Answer Correct? 9 Yes 0 No PostYourAnswer
43 :: Which one of the following would draw a vertical line 30 units in length from a previously
defined point
given as 30,50? (Answer.php?
a=Which_one_of_the_following_would_draw_a_vertical_line_30_units_in_length_from_a_previously_defined_point)
(a)60,50
(b)30,80
(c)@30,0
(d)@30<0
Is This Answer Correct? 10 Yes 0 No PostYourAnswer
44 :: The shape above is based on a 10 unit module. which is the correct set of codes to draw this
shape,
starting at the lower left and moving anti clock wise (Answer.php?
a=The_shape_above_is_based_on_a_10_unit_module_which_is_the_correct_set_of_codes_to_draw_this_shape,_starting_at_the_lower_left_and_moving_anti_clo
(a)0,010,0@10<4510,100,200,30c
(b)0,010,0@10,1010,10@0,200,30c
(c)0,0@10<020,1010,1010,3030,0c
(d)0,0@10,0@10,1010,100,200,30c
Is This Answer Correct? 10 Yes 0 No PostYourAnswer
45 :: There are at least eleven options to the "select objects" prompt. Which of the following has
an incorrect
option? (Answer.php?a=Which_of_the_following_has_an_incorrect_option)
(a)WWPR
(b)CCPF
(c)LALLE
(d)PSIA
Is This Answer Correct? 12 Yes 0 No PostYourAnswer
46 :: When using the move command to move a single object by a given distance, which is the best
of the
following methods? (Answer.php?
a=When_using_the_move_command_to_move_a_single_object_by_a_given_distance_which_is_the_best_of_the_following_methods)
(a)SetosnaptoEND,picktheobject,pickabasepointthenpickonthe
endofanotherobject
(b)Picktheobjectthenkeyintherelativedistancethatitistobe
moved
(c)Picktheobjectthenkeyintheabsolutedistancethatitistobe
moved
(d)Picktheobject,keyin'END'keyin'END'againthenpickontheend
ofanotherobject
Is This Answer Correct? 8 Yes 1 No PostYourAnswer
48 :: The following two commands used one after the other BOUNDARY then pick inside an area
ERASE ALL
R LAST produces which of these results (Answer.php?
a=The_following_two_commands_used_one_after_the_other_BOUNDARY_then_pick_inside_an_area_ERASE_ALL_R_LAST_produces_which_of_these_results)
(a)ChangeslayertotheBoundarylayerthenerasesallitemsonthelastlayer
(b)Calculatestheareaoftheboundaryanderasesalltheconstructionlines
(c)Drawsapolylinethattouchestheextremesoftheareathenerasesalltherecentlydrawnlines
(d)Drawsapolylinethattouchestheextremesoftheareathenerasesallbutthatpolylin
Is This Answer Correct? 9 Yes 0 No PostYourAnswer
49 :: Which one of the following system variables disables the prompt which asks for attribute
49 :: Which one of the following system variables disables the prompt which asks for attribute
values, and
causes attributes to be set to their defaults? (Answer.php?
a=Which_one_of_the_following_system_variables_disables_the_prompt_which_asks_for_attribute_values_and_causes_attributes_to_be_set_to_their_defaults)
(a)ATTDIA
(b)ATTDISP
(c)ATTPROMPT
(d)ATTREQ
Is This Answer Correct? 12 Yes 0 No PostYourAnswer
50 :: Which one of the following best defines attributes as used in AutoCAD and defined by the
command
DDATTDEF. (Answer.php?
a=Which_one_of_the_following_best_defines_attributes_as_used_in_AutoCAD_and_defined_by_the_command_DDATTDEF)
(a)Textentitiesthatcanlinktoadatabase.
(b)Specialtextentitieswithinablock.
(c)Textentitiesthatuseanalternativefont.
(d)Specialtextentities.
Is This Answer Correct? 11 Yes 0 No PostYourAnswer
52 :: The effect of the EXPLODE command when applied to a block is to? (Answer.php?
a=The_effect_of_the_EXPLODE_command_when_applied_to_a_block_is_to)
(a)reduceablocktoit'sconstituententitiestoallowediting.
(b)returnablocktoit'screatedscaleandrotation.
(c)allowtheeditingofablockwithdifferentX,Yfactors.
(d)placeconstituententitiesallontothecurrentlayer.
Is This Answer Correct? 12 Yes 0 No PostYourAnswer
53 :: The use of blocks allows libraries of standard parts to be developed and saved for latter use.
Blocks may
be stored (Answer.php?
a=The_use_of_blocks_allows_libraries_of_standard_parts_to_be_developed_and_saved_for_latter_use_Blocks_may_be_stored)
(a)ondisk.
(b)ondisk,CDROMandtheInternet.
(c)ondiskandCDROM.
(d)ondiskandtheInternet.
Is This Answer Correct? 10 Yes 0 No PostYourAnswer
54 :: Which one of the following methods should be used to repeat a complex part in a drawing in
order to
minimise file size? (Answer.php?
a=Which_one_of_the_following_methods_should_be_used_to_repeat_a_complex_part_in_a_drawing_in_order_to_minimise_file_size)
(a)usetheCOPYcommand
(b)usetheMIRRORcommand
(c)usetheARRAYcommand
(d)createaBLOCKthenuseINSERT
Is This Answer Correct? 10 Yes 0 No PostYourAnswer
55 :: Which one of the following is a correct statement regarding AutoCAD blocks? (Answer.php?
a=Which_one_of_the_following_is_a_correct_statement_regarding_AutoCAD_blocks)
(a)Blockscanonlybeinsertedintoadrawingiftheyalreadyexistin
thatdrawing.
(b)Ablockcanhavenomorethantenattributes.
(c)Theinsertcommandlooksfirstwithinthedrawingforblocksandthen
tothedisk.
(d)Everyblockhastohaveatleastoneattribute.
Is This Answer Correct? 10 Yes 0 No PostYourAnswer
58 :: Which one of the following allows the value of the system variable PICKBOX to be changed
whilst in the
ERASE command? (Answer.php?
a=Which_one_of_the_following_allows_the_value_of_the_system_variable_PICKBOX_to_be_changed_whilst_in_the_ERASE_command)
(a)SETVARpickboxorPICKBOX
(b)'SETVARpickboxor'PICKBOX
(c)'SELECT
(d)CHANGE
Is This Answer Correct? 11 Yes 0 No PostYourAnswer
59 :: Which one of the following system variables determines the visibility of the control points of
a pline spline
curve? (Answer.php?
a=Which_one_of_the_following_system_variables_determines_the_visibility_of_the_control_points_of_a_pline_spline_curve)
(a)SPLFRAME
(b)SPLMODE
(c)SPLINESEGS
(d)SPLINEVIEW
Is This Answer Correct? 10 Yes 0 No PostYourAnswer
61 :: Which of the following system variables controls the accuracy of approximation of a spline
curve? (Answer.php?
a=Which_of_the_following_system_variables_controls_the_accuracy_of_approximation_of_a_spline_curve)
(a)SPLFRAME
(b)SPLINEFIT
(c)SPLINESEGS
(d)SPLMODE
Is This Answer Correct? 6 Yes 0 No PostYourAnswer
62 :: Which one of the following commands can be used to change the value of a system variable?
(Answer.php?
a=Which_one_of_the_following_commands_can_be_used_to_change_the_value_of_a_system_variable)
(a)CHANGE
(b)DIMVAR
(c)SELECT
(d)SETVAR
Is This Answer Correct? 9 Yes 0 No PostYourAnswer
64 :: Which one of the following is the BEST procedure for drawing a line from the point of
intersection of a line
and a circle? (Answer.php?
a=Which_one_of_the_following_is_the_BEST_procedure_for_drawing_a_line_from_the_point_of_intersection_of_a_line_and_a_circle)
(a)SelecttheLINEcommandandthenuseobjectsnapwiththeINSoption.
(b)SelecttheLINEcommandandthenuseobjectsnapwiththeINToption.
(c)SetasmallSNAPvaluethenselecttheLINEcommandandSNAP.tothe
intersection
(d)Zoominontheintersection,thenselecttheLINEcommandandclickthe
LHmousebuttonforthestartpoint.
Is This Answer Correct? 9 Yes 0 No PostYourAnswer
67 :: Which of the following shapes CANNOT be drawn by the polygon command? (Answer.php?
a=Which_of_the_following_shapes_CANNOT_be_drawn_by_the_polygon_command)
(a)Square
(b)Hexagon
(c)Rectangle
(d)Equilateraltriangle
Is This Answer Correct? 8 Yes 0 No PostYourAnswer
69 :: Which one of the following is the maximum number of layers which can be defined in an
AutoCAD
drawing? (Answer.php?
a=Which_one_of_the_following_is_the_maximum_number_of_layers_which_can_be_defined_in_an_AutoCAD_drawing)
(a)64
(b)128
(c)256
(d)UNLIMITED
Is This Answer Correct? 11 Yes 0 No PostYourAnswer
70 :: Which one of the following commands can be used to obtain information about a selected
object? (Answer.php?
a=Which_one_of_the_following_commands_can_be_used_to_obtain_information_about_a_selected_object)
(a)ID
(b)LIST
(c)MEASURE
(d)STATUS
Is This Answer Correct? 12 Yes 0 No PostYourAnswer
71 :: AutoCAD has had the dreaded Model Space and Paper Space since R12. What is the main
71 :: AutoCAD has had the dreaded Model Space and Paper Space since R12. What is the main
advantage of
the system? (Answer.php?
a=AutoCAD_has_had_the_dreaded_Model_Space_and_Paper_Space_since_R12_What_is_the_main_advantage_of_the_system)
(a)Itconfusesstudents
(b)Itconverts2Ddrawingsto3D
(c)ItenablestheCADoperatortosetthescaleofthe
(d)Itsavesspacebecauseitrequiresfewerlayers.
Is This Answer Correct? 16 Yes 0 No PostYourAnswer
72 :: Why does AutoCAD allow you more than one layout? (Answer.php?
a=Why_does_AutoCAD_allow_you_more_than_one_layout)
(a)Differentoutputdevices.
(b)Differentsizesofoutput.
(c)Differentoutputorientation.
(d)Alloftheabove.
Is This Answer Correct? 16 Yes 2 No PostYourAnswer
73 :: A common command for many Windoze applications is "Page Setup". What in AutoCAD does
Page
Setup achieve? (Answer.php?
a=A_common_command_for_many_Windoze_applications_is_Page_Setup_What_in_AutoCAD_does_Page_Setup_achieve)
(a)Setsthescaleatwhichthedrawingisprinted.
(b)Setstheoutputdevice,alsothesizeandorientationoftheoutput
(c)Setslimitsandtheworkingunits.
(d)SetsUpthepapersize,marginsandorientation
Is This Answer Correct? 9 Yes 0 No PostYourAnswer
74 :: Which of the following key combinations does not invoke an I/O command? (Answer.php?
a=Which_of_the_following_key_combinations_does_not_invoke_an_I_O_command)
(a)Ctrl+P
(b)Ctrl+F
(c)Ctrl+S
(d)Ctrl+O
Is This Answer Correct? 11 Yes 1 No PostYourAnswer
75 :: In a Windoze dialogue box, moving from one field to another is achieved by which of the
following key
combinations? (Answer.php?
a=In_a_Windoze_dialogue_box_moving_from_one_field_to_another_is_achieved_by_which_of_the_following_key_combinations)
(a)Ctrl+[Tab]
(b)Alt+[Tab]
(c)Shift+[Tab]
(d)[Tab]
Is This Answer Correct? 16 Yes 0 No PostYourAnswer
76 :: When constructing an AutoCAD Solid Model the UCS command is used to (Answer.php?
a=When_constructing_an_AutoCAD_Solid_Model_the_UCS_command_is_used_to)
(a)Drawmoreaccurately
(b)DrawSolidObjects
(c)RotateSolidObjects
(d)DefineanewDrawingPlane
Is This Answer Correct? 35 Yes 0 No PostYourAnswer
77 :: When using the SOLVIEW command on a blank PS layout which sub command should be issued
first
and why? (Answer.php?
a=When_using_the_SOLVIEW_command_on_a_blank_PS_layout_which_sub_command_should_be_issued_first_and_why)
(a)UCSWorldbecauseyouhavetostartsomewhere.
(b)UCSWorldbecausetheworldUCSistheonlyoneavailable.
(c)Orthobecauseeachviewisto90totheother.
(d)Auxbecauseonecanlineuptheviewmoreaccurately.
Is This Answer Correct? 63 Yes 1 No PostYourAnswer