Beruflich Dokumente
Kultur Dokumente
99
------------------------------------------------------------------------------
| LINDE AG | Valve Specification | LINDE STANDARD |
| Werksgruppe | LS 486-03 | |
| Verfahrenstechnik | | ASP 5N182 |
| und Anlagenbau | STRAINER | |
|------------------------------------------------------------------------------|
| Origin:TKK/Knob. | Check:TKK/Glae. | Appr:TAN/Hent. | Total 1 Page(s) |
|------------------------------------------------------------------------------|
| Manufact./Typ: - | Job No.: Jobname: |
------------------------------------------------------------------------------
--------------------------------------------------------------------------
| DN : 15 20 25 40 50 65 80 100 150 |
| NPS : 1/2 3/4 1 1 1/2 2 2 1/2 3 4 6 |
--------------------------------------------------------------------------
| DN : 200 250 |
| NPS : 8 10 |
--------------------------------------------------------------------------
TYPE
Y type
CONNECTION
Flanges acc. to DIN 2501, flange facing type C acc. to DIN 2526
MATERIAL
Body/Cover plate: GS-17CrMo55, 13CrMo44 acc. to DIN 3339
Cover plate gasket: acc. to manufakturer, free of Asbestos
Screen: CrNi steel
Bolts/Nuts: 21CrMoV57/24CrMo5
DESIGN
Screen: Mesh opening W= 1,6mm, diameter of wire D= 0,50mm
Ratio open screening area to inner pipe area =>2
DN =>150 cover plate with pipe plug NPT 1 inch
Flow horizontal and vertical
Body/Cover plate connection with male and female
All parts contacting fluid free of nonferrous metals
GENERAL
All specified data are minimum requirements.
All parts not specified are to be designed acc. to scope, service and
fluids by manufacturers option.
Revisions: -
Previous Issues: -
Copyright reserved.