Beruflich Dokumente
Kultur Dokumente
DRAWLUB C 100 NT-emulsions have good filtering performances and o Suitable for wide range of
showing low foam tendency at > 100 ppm CaCO3 water hardness. New processes and metals
ingredients give DRAWLUB C 100 NT a good bio-stability, inhibiting the
o Low foam tendency at
breeding of micro-organisms and therefore largely preventing bacteria,
> 100 ppm CaCO3 water
yeast and fungicide growth.
hardness
DRAWLUB C 100 NT is suitable for the annealing step at concentrations
between 0.5 - 2%. For special quality demands we recommend to use
DRAWLUB RC 1, which has been especially developed for annealing of copper wire. The
application concentration of DRAWLUB C 100 NT depends on various factors (i.e., wire rod quality,
dimensions, machine design and drawing velocity). In general the following concentrations are
recommended:
Rod breakdown 10 - 19 %
Medium wire 7 - 10 %
Multiple wire 6 - 11 %
Physical data
Appearance/20 C visual brown, clear, liquid
Density/20 C DIN 51757 approx. 0.938 g/cm
Viscosity/40 C DIN 51562/1 approx. 61 mm/s
Pourpoint ISO 3016 approx. 28 C
pH value, 10 % DIN 51369 9.6 10,0
Refractometer Factor PLM 1,0
Foam characteristics, 5 % PLM low foam, quick decomposition
(water hardness 100 ppm CaCO3)