Sie sind auf Seite 1von 9

MECANICA DE ROCAS II

PROGRAMA UNWEDGE 3.0

1. PROCEDIMIENTO
a. Poner nombre al proyecto.

b. Dibujar el modelo con las siguientes cooedenadas, (5,15-5,5-15,5-15,15)

c. Modelo en dimencionamiento de 3D

1
MECANICA DE ROCAS II

d. Introduccion de las caracteristicas de las cuas en el modelo.

Introduccion del sistema de juntas.

2
MECANICA DE ROCAS II

e. Analizamos los factores de seguridad de cada una de las cuas, para ver cual
es estas cuas necesita sostenimiento para que pueda subir el factor de
seguridad.

f. Seleccionamos la cua 8 cuyo factor de seguridad es 0.000, necesita


sostenimiento y aplicaremos pernos de anclaje.

g. Aplicamos los pernos de anclaje de acuerdo a las caracteristicas obtenidas


anteriormente del la cua 8
3
MECANICA DE ROCAS II

h. Se observa en la imagen, los pernos aplicados.

i. Se observa los pernos en dimencionamiento 3D, y tambien se observa que el


factor de seguridad es de 30.595 estable.

4
MECANICA DE ROCAS II

j. APLICACIN DEL PERNO EN DIMENCIONAMIENTO EN 3D Y LA CANTIDAD DE


PERNOS APLICADOS DE LA CUA 8 EN LA CAJA HECHO DE LA EXCAVACION.

k. VISUALIZACION DE LOS TRES VISTAS DE LAS CUA Y LA APLICACIN DE LOS


PERNOS.
5
MECANICA DE ROCAS II

2. CONCLUSIONES

Concluimos satisfactoriamente con el programa con lo siguiente:

Se defini la geometra de la excavacin en la cual el programa nos mostr en


un plano de 3 D con la que nos facilita el anlisis de las cuas que se
encuentran alrededor de la excavacin.

Gracias a ello podemos analizar cada uno de las cuas y poder ver sus factores
de seguridad.

Se analiz que tres cuas que se encontraban alrededor de la excavacin


necesitaban soporte para que tenga un factor de seguridad alto y que no pueda
ocasionar problemas.

El factor de seguridad debe de estar entre 1.5 3.

3. REPORTE DEL PROGRAMA UNWEDGE

Unwedge Analysis Information


6
MECANICA DE ROCAS II

Document Name

File Name: Unwedge1

Project Settings

Project Title: DIEGO SARMIENTO TICONA


Wedges Computed: Perimeter and End Wedges
Units: Metric, stress as tonnes/m2

General Input Data

Tunnel Axis Orientation:


Trend: 15
Plunge: 0
Design Factor of Safety: 1.500
Unit Weight of Rock: 2.300 t/m3
Unit Weight of Water: 0.981 t/m3

Seismic Forces

Not Used

Scale Wedges Settings

Not Used

Joint Orientations

Joint 1
Dip: 45
Dip Direction: 190
Joint 2
Dip: 35
Dip Direction: 090
Joint 3
Dip: 45
Dip Direction: 350

Joint Properties

Joint Properties 1
Water Pressure
Constant: 0 tonnes/m2
Waviness: 0
Shear Strength Model: Mohr-Coulomb
Phi: 30
Cohesion: 0 tonnes/m2
Tensile Strength: 0 tonnes/m2

Bolt Properties

Bolt Property 1
Bolt Type: Mechanically Anchored

7
MECANICA DE ROCAS II

Tensile Capacity: 10 tonnes


Plate Capacity: 10 tonnes
Anchor Capacity: 10 tonnes
Shear Strength: Unused
Bolt Orientation Efficiency: Used
Method: Cosine Tension/Shear

Shotcrete Properties

Shotcrete Property 1
Shear Strength: 200.00 t/m2
Unit Weight: 2.600 t/m3
Thickness: 10.00 cm

Support Summary

Summary of Perimeter Shotcrete


No Shotcrete on Perimeter

Summary of Perimeter Support Pressure


No Support Pressure on Perimeter

Summary of Perimeter Bolt Patterns


Number of Bolt Patterns on Perimeter: 1
Perimeter Bolt Pattern: 1
Property: Bolt Property 1
Strength type: Mechanically Anchored
Bolt Length: 2.50 m
Orientation: normal to boundary
Pattern Spacing - In Plane: 1.50 m
Pattern Spacing - Out of Plane: 2.50 m
Pattern Spacing - Out of Plane Offset: 0.00 m

Summary of End Bolt Patterns


No Bolt Pattern on Ends

Summary of End Support Pressure


No Support Pressure on Ends

Summary of End Shotcrete


No Shotcrete on Ends

Wedge Information

Floor wedge [1]


Factor of Safety: stable
Wedge Weight: 18.172 tonnes
Support Pressure: 0.00 tonnes
Apex Height: 1.38 m

Lower Right wedge [3]


Factor of Safety: 4.633
Wedge Weight: 868.672 tonnes
Support Pressure: 0.00 tonnes
Apex Height: 10.74 m

8
MECANICA DE ROCAS II

Upper Left wedge [6]


Factor of Safety: 0.825
Wedge Weight: 1394.622 tonnes
Support Pressure: 3.34 tonnes
Apex Height: 12.65 m

Roof wedge [7]


Factor of Safety: 0.577
Wedge Weight: 0.003 tonnes
Support Pressure: 0.03 tonnes
Apex Height: 0.04 m

Roof wedge [8]


Factor of Safety: 30.595
Wedge Weight: 0.309 tonnes
Support Pressure: 0.00 tonnes
Apex Height: 0.33 m

Near End wedge [9]


Factor of Safety: 1.259
Wedge Weight: 18.283 tonnes
Support Pressure: 0.14 tonnes
Apex Height: 1.75 m

Far End wedge [10]


Factor of Safety: 0.577
Wedge Weight: 18.283 tonnes
Support Pressure: 0.79 tonnes
Apex Height: 1.75 m

Das könnte Ihnen auch gefallen