Beruflich Dokumente
Kultur Dokumente
From fb posts
tap changer is used on a transformer for?
A tap changer is a mechanism in transformers which allows for variable turn ratios to be selected in
discrete steps. ... Additionally, tap changers are often placed on the high voltage (low current)
transformer winding for easy access and to minimize the current load during operation.
The approximate intensity level of the sound which can cause damage to the ear drum is?
A. 20 dB
B. 60 dB
C. 100 dB
D. 160 dB
The approximate intensity level of the sound which can cause damage to the ear drum is?
A. 20 dB
B. 60 dB
C. 100 dB
D. 160 dB
MEPCO INTERVIEW 11th July Interview Start at 11 AM & End at 4:35 PM (40 Candidate)
Question Ask By Me in MEPCO Interview:1:What is Power Factore?2:how we can improve power factor?
3:What is Draw back of Low P.F?4:Transformer Protection Rely?5:What is P.f of Incandicent (Bulb)Lamp?
6:What is differnce between MOSFET & SCR?7:Draw Fig of SCR? No Question Of G.K Asked By Me Best of
luck all others
A. Blue
B. Pink
C. Brown
D. Green
In order to get maximum power transfer from a capacitive source, the load must
A
have a capacitive reactance equal to circuit resistance
.
B.have an impedance that is the complex conjugate of the source impedance
C.be as capacitive as it is inductive
D
none of the above
.
Answer: Option B
In a certain loaded transformer, the secondary voltage is one-fourth the primary voltage. The secondary
current is
A. one-fourth the primary current
B. four times the primary current
C. equal to the primary current
D. one-fourth the primary current and equal to the primary current
In a certain loaded transformer, the secondary voltage is one-fourth the primary voltage. The
secondary current is
A
one-fourth the primary current
.
B.four times the primary current
C.equal to the primary current
D
one-fourth the primary current and equal to the primary current
.
Answer: Option B