Beruflich Dokumente
Kultur Dokumente
converted by Web2PDFConvert.com
1x Arduino Board(does not matter which version).
1x BreadBoard.
1x 1 Digit 7 Segment display.
2x Push Buttons.
4x 220 ohm resistors(Will work up to 1K).
16x Male to male jumper wires.
converted by Web2PDFConvert.com
converted by Web2PDFConvert.com
Connect as shown in the image above:
Arduino 5V pin to the PLUS of the breadboard.
Arduino GND to the MINUS of the breadboard.
7-Segment pin 8 & 3 to the PLUS of the breadboard through your resistors.
NOTE: if your 7 segment display is a common cathode display, connect pins
8 & 3 of the display to the GND!!
7-Segment pin 1 to Arduino pin 6.
7-Segment pin 2 to Arduino pin 5.
7-Segment pin 4 to Arduino pin 4.
7-Segment pin 5 to Arduino pin 7.
7-Segment pin 6 to Arduino pin 2.
7-Segment pin 7 to Arduino pin 3.
7-Segment pin 9 to Arduino pin 8.
7-Segment pin 10 to Arduino pin 9.
Connecting the buttons:
connect one side of the button to the PLUS of the breadboard;
connect the other side through a resistor to the GND of the breadboard, and to
Arduino pin 12.
Do that for the second button and connect it to Arduino pin 13.
Download
_7_Segment_Click_Cou
Ad
Brushless DC Motor
customize offered IEC NEMA standard Motor
100W-1500W with drive controller
volcanomotor.com
I More Comments
converted by Web2PDFConvert.com
FEATURED CHANNELS
Woodworking Paper Kitchen Hacks Puzzles Laser Cutting Space Homesteading 3D Printing Sewing
converted by Web2PDFConvert.com