Beruflich Dokumente
Kultur Dokumente
Document Study:
Use of vendor data in design,
Various documents required for plant design.
Preparation of:
Piping material specification,
Valve specification and data sheets,
Nozzle orientation of process equipment,
Bill of Material at various stages,
Isometric drawings and final MTO.
Development of:
Equipment layout,
Piping layout,
Industrial Plot Plan.
Study of Analysis System using CAESAR II software, pipe supports & loop calculations.
Plant Design Management System (PDMS) Software
Site Visit will be arranged at industrial plant either in shut down or not working conditions.
MOC Interview.
F/041/00 This document is the property of Suvidya Institute of Technology Pvt. Ltd. and unauthorised dosclousre to any third party or duplication is not permitted Page 1 of 6
RULES & REGULATIONS
2. Accommodation:
3. Mode of Payment:
a. 100% in advance at the time of admission, along with the duly completed admission form.
b. Payment to be made thru NEFT transfer to Suvidya Institute of Technology Pvt. Ltd. Axis Bank Account.
c. Find account details below.
Account No. 911020002988600
IFSC code - UTIB0001244
MICR code - 400211082
Swift Code - AXISINBB028
5. Admission Transfer :
6. Admission Cancellation:
Signature _________________________
F/041/00 This document is the property of Suvidya Institute of Technology Pvt. Ltd. and unauthorised dosclousre to any third party or duplication is not permitted Page 2 of 6
c. Admission shall be cancelled, where students fail to attend first three lectures or fail to inform for
absenteeism.
d. Fees refund shall be done only thru Bank transfer and subject to Dollar rate.
7. Stationery required:
a. Scientific Calculator
b. Pen (Blue, Red and Green)
c. Highlighter (Yellow)
d. Pencil 0.5mm and Eraser
e. Compass Box with geometrical accessories
f. Additional stationery may be purchased from SIT, only in the break time.
a. Training Material
b. Case Study Material
c. SIT Notebook - 1 No.
d. Pen (Blue) - 1 No.
9. Attendance:
a. Attendance will be noted only through Biometric Finger Scan Reader. Ensure to complete your biometric
finger scan registration on first day of batch from the Training Co-ordinator.
b. Manual attendance will not be taken into account.
c. In case of any problem faced during punching, kindly inform to your Training Co-ordinator, in writing
immediately.
d. 3 late comings will be marked as one absent.
e. Late comers will be allowed to enter the training room only after half an hour of lecture start time.
f. You will be entitled for 3% bonus marks and a Certificate of Appreciation for 100% attendance.
g. Students only with and above 75% of attendance will be allowed to appear for the final examination.
h. In case of absenteeism, students will collect notes from other classmates and lecture will not be repeated
at any circumstances. If required students may attend the additional lecture with other ongoing batch, on
payment of ` 1500/- per lecture.
a. Unit Tests & Assignments shall not be repeated, for any reason, whatsoever.
b. Assignments shall be dropped in the Assignment Box with proper assignment covering page. Complete
information shall be filled on the covering page of the assignment.
c. Assignments shall be completed within the time period given by the Faculty.
d. Assignments submitted late shall be checked without giving any marks.
e. Assignments may be submitted personally, through friends or through email. In case of email, hard copy
is required to be submitted later.
f. Assignments shall be collected within a month from completion of course.
a. Students only with and above 75% of attendance will be allowed to appear for the final examination.
b. Students unable to appear for the examination shall inform the Training Co-ordinator.
c. Grade of certificate is based on the students average score in Unit Test, Assignment and Final Exam.
d. Weightage:Unit Test - 30%, Assignment - 15%, Final Exam - 50%, Attendance - 3 % and Discipline - 2 %.
e. Criteria for Grade : Distinction - 75% and Above
I Class - 60% to 74.99%
II Class - 50% to 59.99%
No Certificate - 49.99% and less
Signature _________________________
F/041/00 This document is the property of Suvidya Institute of Technology Pvt. Ltd. and unauthorised dosclousre to any third party or duplication is not permitted Page 3 of 6
12. Re examination:
a. Students passing with second class in the first attempt shall be given opportunity of Class Improvement
to re-appear for examination with additional fees of ` 750/- + 12.36 % Service Tax.
b. Student interested to re-appear shall surrender their earlier certificate.
c. Class Improvement will be allowed only once and Grade will be updated based on the performance in the
class improvement test.
a. Graduate Engineer will be awarded Post Graduate Diploma and Diploma holder with Post Diploma
certificate, irrespective of the Training Program content.
b. Certificates are awarded only to the students, after successfully completing the Training Program.
c. Students shall collect certificates within one month of convocation and those unable to collect personally
may request to dispatch by courier at given address, subject to students risk and on payment of courier
charges.
d. Certificate may be issued in absence of student, but only on submission of authority letter.
e. Duplicate certificate, stamped Duplicate may be issued only on payment of additional charges of ` 250/.
f. Best performing students are awarded with Medals - 1st Ranker - Gold Medal
2nd Ranker - Silver Medal
3rd Ranker - Bronze Medal
a. Students are required to be thorough in English language, same being the Medium of Instruction.
b. Students are required to complete the Training Program and appear for examination of the same batch.
c. SIT shall not be responsible for the completion of course for irregular students.
d. Students are requested to inform the Training Co-ordinator for any change in mobile number, email ID or
postal address for all communications.
e. Change in lecture dates and timings will be informed on Website or vide SMS.
f. On demand, full day lectures will be arranged once in a month with advance information to all.
g. Parking is not allowed in front of other gates/ doors, advised to park only in the PARKING areas.
h. Library facilities are provided subject to its rules and regulations.
i. Visa being endorsed only for attending training at SIT, students are forbidden from taking admission
elsewhere for any other course or do any other activity.
Signature _________________________
F/041/00 This document is the property of Suvidya Institute of Technology Pvt. Ltd. and unauthorised dosclousre to any third party or duplication is not permitted Page 4 of 6
18. Frequently Asked Questions:
Our students are placed almost in all the companies who are engage in above mentioned business of the
OIL & GAS/ Power Sector in India and abroad.
c. Whether the Training Program is self sufficient without any software training?
Yes, this training program is self sufficient to work in EPC companies and to work on related software.
Software are only design tools, more important is to have thorough knowledge of the subject that will
facilitate to use any software.
e. What is the advantage of doing training from SIT, compared to other Institutes?
Development of skilled manpower is the mission of the SIT and institute strongly believes in quality output
and overall development of the engineers which will strengthen engineering sector globally.
SIT provides training as per the current job requirements, thru industrial case studies and ensures that
students start performing from day one of their job.
SIT is highly acknowledged by the Industry and thats the reason students all over the globe choose SIT
for these specialized Training Programmes.
Signature _________________________
F/041/00 This document is the property of Suvidya Institute of Technology Pvt. Ltd. and unauthorised dosclousre to any third party or duplication is not permitted Page 5 of 6
f. Whether certification is affiliated to any university or whether this certificate is valid, abroad?
SIT is an Autonomous Institute in OIL and GAS sector and not affiliated to any University or Board but
highly recognised by the Industry.
SIT is an ISO 9001:2008 organization, certified by Bureau of Indian Standards (BIS) Govt. of
India.
h. Will the past experience in different field altogether, be of any help in future?
You can definitely take risk of changing your field but one should be absolutely clear about his/ her path
forward. After completing the training one should be ready to work with small consultants and
compromise on salary packages.
i. Do you conduct any Site Visit? How many visits are conducted during the Training Program?
There will be site visit only once during the Training Program. Site visit will be arranged at industrial plant
either in shut down or not working conditions. (Except HVAC and Offshore Engineering)
CODES OF CONDUCT
1. SIT is a centre of learning & development and recognized globally for quality training & ethics.
2. Only those who have potential of learning, self-development and have ability to abide with all the Rules and
Regulations of the SIT shall enroll for Training Programs.
3. Required to be highly punctual and regular in attending the lectures.
4. Required to wear formal dresses only, Jeans and T-shirts are strictly prohibited.
5. Required to maintain utmost discipline & utter silence in the Training room during the lecture hours.
6. Use of Mobile phones in SIT premises is strictly forbidden.
7. Smoking, chewing-gum/ beetle leaves/ tobacco/ gutka, wearing caps, sun glasses and ear/ head phones is
strictly prohibited in and around SIT premises.
8. Student shall take care of SIT property and those causing damage shall be actioned.
9. Required to be polite with SIT staff and all other fellow students and shall avoid needless arguments.
10. Wearing the Identity Card is mandatory and defaulters shall be marked absent for the day.
DECLARATION
I hereby declare that I have thoroughly read, each and every content of this Contract Review and I agree
to abide by all the Rules and Regulations of SIT.
Signature : _________________________
Together We Will Bring New Together we will bring new dimension to Engineering
Together We Will Bring New Dimensions
Industry To Engineering Industry
Dimensions Engineering Industry
F/041/00 This document is the property of Suvidya Institute of Technology Pvt. Ltd. and unauthorised dosclousre to any third party or duplication is not permitted Page 6 of 6