Beruflich Dokumente
Kultur Dokumente
http://www.elastix.org
PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
2
PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
5. Click on the Submit button to add an extension, see Figure 4-3. This will take you to
the Add SIP Extension page.
3
PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
6. On the Add SIP Extension page (Figure 4-4), fill in the following information:
7. Click on Submit button at the end of the page, and you will see a similar page on
Figure 4-5 displaying the Apply Configuration Changes Here pink ribbon on top of
the screen. Click on there to apply changes.
Figure 4-5
4
PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
8. With this you have just finished creating a SIP extension that will be used by the
Grandstream GXW4004 to integrate an analog phone connected to it. Repeat Steps 5
through 8 to similarly create another extension (different values on Step 6) to be used by
the IP (SIP) Phone to register as well (extension 302 in this example). Once you
finished you will see something similar to Figure 4-6.
Figure 4-6
9. You will need to enter the information from the extension created on the Elastix
Server into the Grandstream Gateway.
For the initial configuration, refer to the Grandstream GXW4004 User Manual found at:
http://www.grandstream.com/index.php/products/ip-voice-telephony/enterprise-
analog-gateways/gxw400x
IP Addressing DHCP
Web Access Password admin
10. Log in to the Grandstream GXW4004 WebUI by pointing your browser to the IP
address of the gateway.
11. When prompted, enter the Web Access Password to accesss to the WebUI (Figure 4-
7).
5
PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
12. Use the information from the Add SIP Extension page (Figure 4-4) to enter the
following necessary information on FXS Ports section of the Grandstream Gateway
WebUI (Figure 4-8):
13. Once you have entered the required information, click on Update button located at
the end of the page. Now go Profile 1 to edit some parameters (Figure 4-9).
15. Once rebooted, go to Status section and check if the registration was successful
for the first fxs port. (Figure 4-10).
6
PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
16. To test the settings, pick up the previously configured IP (SIP) Phone and call to the
analog phone connected on the FXS 1 port of the GXW4004 (701 in this example).
When the call is established, speak into the phone and verify that the other IP (SIP)
Phone can hear your voice. Now make a call from analog phone to the IP Phone (from
701 to 301) and check the call is established correctly. This step completes the
procedure to integrate analog phones with Elastix Server.