Beruflich Dokumente
Kultur Dokumente
FINESET - AE 933
(SINGLE COMPONENT EPOXY FOR B - STAGING)
PRODUCT
APPLICATION
FINESET - AE 933 is an ideal adhesive compound suitable for loading polyester fleece for
application in electric motors. This is also used for coating nomex sheets, which are used as
slot insulation in HT machines. The bonding of these sheets to winding and core will take
place at temperatures above 130oC. It can also be used to bond the magnetic particles and
then to press and cure to make bonded magnets. Another important application is its use as a
consolidating resin for HT coils. This is also an excellent coating for electrical insulation of
components like strain gauges.
SPECIAL FEATURES
PROCESS
For reducing the viscosity of FINESET - AE 933, methyl ethyl ketone can be added. After
thorough mixing, coat the sheets or soak the fleece and remove the solvent by drying at 60 -
80oC. The loaded or coated products can be stored for at least 6 months at temperatures of
less than 25oC. The fleece or nomex sheets have excellent flexibility. The final product can
be cured at schedules, selected from the following table.
Cure Temperature Min. Cure Time
130oC 10 hours
o
150 C 2.5 hours
180oC 30 minutes
Cure schedule for a specific process has to be established by trial.
A joint made of aluminium-magnesium alloy plates stuck by FINESET - AE 933 and cured
at 180oC for 1 hour has the following typical properties.
SURFACE PREPARATION
SAFETY INFORMATION
If this document is stamped as Controlled Copy, you will automatically receive all future revisions of this.