Sie sind auf Seite 1von 278

WCDMA RAN

URA-Cell Update Feature Parameter


Description

Issue 01
Date 2016-04-28

HUAWEI TECHNOLOGIES CO., LTD.


Copyright Huawei Technologies Co., Ltd. 2016. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.


Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China

Website: http://www.huawei.com
Email: support@huawei.com

Issue 01 (2016-04-28) Huawei Proprietary and Confidential i


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description Contents

Contents

1 About This Document.................................................................................................................. 1


1.1 Scope.............................................................................................................................................................................. 1
1.2 Intended Audience.......................................................................................................................................................... 1
1.3 Change History............................................................................................................................................................... 2
1.4 Differences Between Base Station Types....................................................................................................................... 2

2 Overview......................................................................................................................................... 4
3 URA/Cell Update Principles........................................................................................................6
3.1 Types of URA/Cell Update.............................................................................................................................................6
3.1.1 Periodical URA/Cell Update....................................................................................................................................... 6
3.1.2 URA/Cell Update due to Cell Reselection.................................................................................................................. 7
3.1.3 Cell Update due to Paging Response...........................................................................................................................7
3.1.4 Cell Update due to Uplink Data Transmission............................................................................................................ 8
3.1.5 Cell Update due to Radio Link Failure........................................................................................................................8
3.1.6 Cell Update due to Re-entering Service Area..............................................................................................................8
3.1.7 Cell Update due to RLC Unrecoverable Error............................................................................................................ 9
3.1.8 Cell Update due to MBMS PtP RB Request............................................................................................................... 9
3.1.9 Cell Update due to MBMS Reception......................................................................................................................... 9
3.2 Signaling Procedure of URA/Cell Update......................................................................................................................9
3.2.1 Signaling Procedure of URA Update.......................................................................................................................... 9
3.2.2 Signaling Procedure of Cell Update.......................................................................................................................... 12
3.3 Automatic FACH Power Compensation During Cell Updates.....................................................................................17
3.4 Optimization of the URA/Cell Update Procedure........................................................................................................ 18
3.4.1 Optimization of Cell Update Timeout for UEs in CELL_FACH State..................................................................... 18
3.4.2 Optimization of Concurrence of the Cell Update and Other Signaling Procedures.................................................. 18

4 Engineering Guidelines............................................................................................................. 20
4.1 WRFD-010801 Intra RNC Cell Update....................................................................................................................... 20
4.2 WRFD-010802 Inter RNC Cell Update....................................................................................................................... 20
4.3 WRFD-010901 Intra RNC URA Update......................................................................................................................20
4.4 WRFD-010902 Inter RNC URA Update......................................................................................................................20
4.5 Automatic FACH Power Compensation During Cell Updates.....................................................................................20
4.5.1 When to Use Automatic FACH Power Compensation During Cell Updates............................................................20
4.5.2 Required Information................................................................................................................................................ 20

Issue 01 (2016-04-28) Huawei Proprietary and Confidential ii


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description Contents

4.5.3 Deployment............................................................................................................................................................... 21
4.5.3.1 Requirements.......................................................................................................................................................... 21
4.5.3.2 Data Preparation..................................................................................................................................................... 21
4.5.3.3 Precautions..............................................................................................................................................................22
4.5.3.4 Activation............................................................................................................................................................... 22
4.5.3.5 Activation Observation...........................................................................................................................................23
4.5.3.6 Deactivation............................................................................................................................................................25
4.5.4 Performance Monitoring............................................................................................................................................26
4.5.5 Parameter Optimization............................................................................................................................................. 27

5 Parameters..................................................................................................................................... 28
6 Counters...................................................................................................................................... 241
7 Glossary....................................................................................................................................... 273
8 Reference Documents............................................................................................................... 274

Issue 01 (2016-04-28) Huawei Proprietary and Confidential iii


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 1 About This Document

1 About This Document

1.1 Scope
This document describes basic types and signaling procedure of URA/Cell update, including
its technical principles, and engineering guidelines.
This document covers the following features:
l WRFD-010801 Intra RNC Cell Update
l WRFD-010802 Inter RNC Cell Update
l WRFD-010901 Intra RNC URA Update
l WRFD-010902 Inter RNC URA Update
This document applies to the following NE types.

NE Type NE Model

RNC BSC6900, BSC6910

NodeB Macro 3900 series macro base stations: BTS3900, BTS3900A,


BTS3900L, BTS3900AL, DBS3900, BTS3900C

Micro BTS3911E

LampSite DBS3900 LampSite

1.2 Intended Audience


This document is intended for personnel who:
l Need to understand the features described herein
l Work with Huawei products

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 1


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 1 About This Document

1.3 Change History


This section provides information about the changes in different document versions. There are
two types of changes, which are defined as follows:

l Feature change
Changes in features of a specific product version
l Editorial change
Changes in wording or addition of information that was not described in the earlier
version

RAN18.1 01 (2016-04-28)
This issue includes the following changes.

Change Change Description Parameter Change


Type

Feature Added the function of optimized processing RESERVED_SWITCH_21_


change for concurrence of the security mode and BIT3 under the
cell update for UEs in the CELL_DCH RsvSwitch21(BSC6900,BSC6
state. For details, see 3.1.5 Cell Update due 910) parameter is now used.
to Radio Link Failure.

Editorial None. None.


change

1.4 Differences Between Base Station Types


Feature Support by Macro, Micro, and LampSite Base Stations
Feature ID Descriptio Supported by Supported Supported Supported
n Controller(Y/N/NA) by by by
Macro(Y/ Micro(Y/ LampSite(
BSC6900 BSC6910 N/NA) N/NA) Y/N/NA)

WRFD-01 Intra RNC Y Y Y Y Y


0801 Cell
Update

WRFD-01 Inter RNC Y Y Y Y Y


0802 Cell
Update

WRFD-01 Intra RNC Y Y Y Y Y


0901 URA
Update

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 2


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 1 About This Document

WRFD-01 Inter RNC Y Y Y Y Y


0902 URA
Update

NOTE

Y indicates that a feature is supported; N indicates that a feature is not supported; NA indicates that an NE is
not involved, that is, a feature does not require the support of the NE.

The features described in this document are implemented in the same way on macro, micro,
and LampSite base stations.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 3


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 2 Overview

2 Overview

The URA is the UTRAN registration area. A URA consists of multiple cells. URA update
happens only in the URA_PCH state. The purpose of making a UE switching to the
URA_PCH state is to prevent a UE that has no data to transmit (especially those moving at a
high speed) from frequently initiating cell reselection. The functions and basic processes of
cell update and URA update are similar. The only difference lies in the range of triggering the
update. URA/cell update is used by the UE to report the location information and status of the
UE. The reporting method is classified into two types: periodical URA/cell update and event-
triggered URA/cell update. URA update occurs when the UE is in URA_PCH state, and cell
update occurs when the UE is in CELL_PCH or CELL_FACH state.

Additionally, cell update is also used to perform some other functions, such as UE state
transition and radio link re-establishment on the DCH. As a result, cell update may happen
when the UE is in CELL_DCH, CELL_FACH, CELL_PCH, or URA_PCH state.

URA/cell update enables the UTRAN to manage the UE behaviors. It can be applied to
mobility management, cell reselection, and paging procedures. URA/cell update has the
following functions:

The URA update:

l Enables the UTRAN to periodically monitor the status of the UE in URA_PCH state.
l Enables the UTRAN to know in time the URA where the UE is camping if URA changes
after cell reselection.
l Enables the UE to retrieve a new URA identity after reselecting a cell that does not
belong to the currently assigned URA.

The cell update:

l Enables the UTRAN to periodically monitor the status of the UE in CELL_FACH or


CELL_PCH state.
l Enables the UTRAN to know the cell where the UE is camping after the UE in
CELL_PCH, URA_PCH or CELL_FACH state re-enters the service area.
l Enables the UTRAN to know in time the new cell of UE after cell reselection.
l Enables the UE to transit from CELL_PCH or URA_PCH state to CELL_FACH state
when the network is paging the UE.
l Enables the UE to require the uplink data transmission to transit from CELL_PCH or
URA_PCH state to CELL_FACH state.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 4


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 2 Overview

l Enables the UE that is out of synchronization on the dedicated radio link channel to re-
establish a new dedicated channel.
l Enables the RNC to release the RRC connection of the UE or to re-establish an RLC
entity in case of RLC unrecoverable error.
l Enables the UTRAN to be informed about the UEs that are in the URA_PCH,
CELL_PCH, or CELL_FACH state and are to receive MBMS data.
l Enables the UTRAN to count the number of UEs that are in the URA_PCH,
CELL_PCH, and CELL_FACH states and are to receive MBMS data.
l Enables the UEs to request the MBMS PtP RB setup when the UEs are in CELL_PCH,
URA_PCH, or CELL_FACH state.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 5


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 3 URA/Cell Update Principles

3 URA/Cell Update Principles

3.1 Types of URA/Cell Update


This section involves the following features:

l WRFD-010801 Intra RNC Cell Update


l WRFD-010802 Inter RNC Cell Update
l WRFD-010901 Intra RNC URA Update
l WRFD-010902 Inter RNC URA Update

3.1.1 Periodical URA/Cell Update


Once the UE enters the CELL_FACH, CELL_PCH or URA_PCH state, it starts the timer
T305. If the timer T305 expires, the UE performs URA/cell update with the cause "periodical
URA/Cell update". The value of T305 is set through the parameter T305(BSC6900,BSC6910)
on the RNC side. The UE obtains the value of T305 from SIB1 and the message UTRAN
MOBILITY INFO CONF.

l For details about SIB1, see section 8.1.1.6.1 "System Information Block type 1" in 3GPP
TS 25.331 V6.6.0.
l For details about the UTRAN MOBILITY INFO CONF message, see section 10.2.63
"UTRAN MOBILITY INFORMATION CONFIRM" in 3GPP TS 25.331 V6.6.0.

Accordingly, the RNC starts an internal timer for the UE in CELL_FACH, CELL_PCH or
URA_PCH state. The value of this timer is greater than that of T305. When the RNC receives
a URA/CELL UPDATE message with the cause "periodical URA/cell update", it restarts the
internal timer. If the RNC does not receive a URA/CELL UPDATE message before expiry of
the internal timer, the RNC decides that the UE is out of service, and then initiates the RRC
connection release procedure.

NOTE

l Internal timer length = T305 + T302 x N302 + T307 + usIubRTDelay


l usIubRTDelay is the real path transfer delay on the Iub interface. The value is variable and
automatically detected.
l The parameters involved are T305(BSC6900,BSC6910), T302(BSC6900,BSC6910),
T307(BSC6900,BSC6910) and N302(BSC6900,BSC6910).

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 6


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 3 URA/Cell Update Principles

3.1.2 URA/Cell Update due to Cell Reselection


l If a UE in CELL_FACH or CELL_PCH state reselects a new cell, the UE performs cell
update with the cause "cell reselection".
l If a UE in URA_PCH state reselects a new cell of a different URA, the UE performs
URA update with the cause "change of URA".
Upon reception of a URA/CELL UPDATE message with the cause "Change of URA/Cell
reselection", the RNC updates the URA/cell where the UE camps.
The URA ID can be assigned to a cell through the parameter URAID(BSC6900,BSC6910).
The URA ID should be created through the MML command ADD UURA before being
assigned to a cell.
The main parameters involved in the cell reselection algorithm when the UE is in
CELL_FACH, CELL_PCH, or URA_PCH state are listed as follows:
l Hysteresis 1 for connect mode: ConnQhyst1s(BSC6900,BSC6910)
l Hysteresis 2 for connect mode: ConnQhyst2s(BSC6900,BSC6910)
l Cell Sel-selection quality measure: QualMeas(BSC6900,BSC6910)
l Min quality level: Qqualmin(BSC6900,BSC6910)
If you want to set cell reselection parameters for each UE state (URA_PCH, CELL_PCH,
CELL_FACH) respectively, you can use the MML command ADD UCELLSELRESEL to
set them.
l Hysteresis 1 for UE in CELL_PCH or URA_PCH state:
Qhyst1spch(BSC6900,BSC6910)
l Hysteresis 1 for UE in CELL_FACH state: Qhyst1sfach(BSC6900,BSC6910)
l Hysteresis 2 for UE in CELL_PCH or URA_PCH state:
Qhyst2spch(BSC6900,BSC6910)
l Hysteresis 2 for UE in CELL_FACH state: Qhyst2sfach(BSC6900,BSC6910)
l Reselection delay time for UE in PCH state: Treselectionspch(BSC6900,BSC6910)
l Reselection delay time for UE in CELL_FACH state:
Treselectionsfach(BSC6900,BSC6910)
For details about the cell reselection procedure, see "Cell Reselection" in the UE Behaviors in
Idle Mode Feature Parameter Description.
On some occasions, the UE in Cell_PCH state performs cell reselection frequently and
initiates the cell update procedure frequently. When the RNC detects this status of the UE, it
enables the UE to transfer to the URA_PCH state through the message "CELL UPDATE
CONFIRM".
If the number of cell update procedures initiated by the UE within an evaluation period
exceeds the threshold of cell reselection, the RNC judges that the UE is in frequent cell
reselection state.

3.1.3 Cell Update due to Paging Response


If the UE in URA_PCH or CELL_PCH state receives a PAGING TYPE 1 message, it
performs cell update with the cause "paging response". Upon reception of a CELL UPDATE
message with this cause, the RNC sends a CELL UPDATE CONFIRM message to the UE
and switches the UE to the CELL_FACH state.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 7


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 3 URA/Cell Update Principles

3.1.4 Cell Update due to Uplink Data Transmission


If the UE in URA_PCH or CELL_PCH state has uplink data to be transmitted, it performs
cell update with the cause "uplink data transmission". Upon reception of a CELL UPDATE
message with this cause, the RNC sends a CELL UPDATE CONFIRM message to the UE
and switches the UE to the CELL_FACH state.

3.1.5 Cell Update due to Radio Link Failure


The cell update procedure triggered due to a downlink radio link failure is as follows:
1. If the UE in CELL_DCH state detects that the criteria for radio link downlink failure are
met, the UE performs cell update with the cause "radio link failure".
2. Upon reception of a CELL UPDATE message with this cause, the RNC performs the
following operations:
Deletes the current radio link.
Establishes a new radio link.
Sends a CELL UPDATE CONFIRM message to the UE with the parameters of the
new radio link to the cell that receives the CELL UPDATE message.
3. The UE re-establishes the RRC connection on the new radio link.
The criteria for radio link failure involve some timers and constants. A timer (T313) is started
after the UE detects a certain number (N313) of consecutive "out of sync" indications from
layer 1 (L1). If there is no enough number (N315) of consecutive "in sync" indications
received from L1 before the timer (T313) expires, the UE considers radio link failure. Related
parameters are as follows:
l Timer 313: T313(BSC6900,BSC6910)
l Constant 313: N313(BSC6900,BSC6910)
l Constant 315: N315(BSC6900,BSC6910)
In earlier versions, if a single-signaling UE in the CELL_DCH state initiates a cell update in
the security mode, the RNC ignores the cell update request and releases the RRC connection.
In this version, a solution is provided to solve the problem and the RNC, upon receiving a cell
update request, disables the security mode, processes the cell update process, and then starts
the security mode again. To enable this solution, select both
RESERVED_SWITCH_21_BIT3 under the RsvSwitch21(BSC6900,BSC6910) parameter in
the SET UALGORSVPARA command and SECU_CU_CROSS_SWITCH under the
OptimizationSwitch2(BSC6900,BSC6910) parameter in the SET URRCTRLSWITCH
command.

3.1.6 Cell Update due to Re-entering Service Area


When the UE is in CELL_FACH, CELL_PCH, or URA_PCH state is out of service area and
re-enters the service area before T307 or T317 expires, the UE performs cell update with the
cause "re-entering service area". Upon reception of a CELL UPDATE message with this
cause, the RNC updates the cell where the UE camps.
T305 is started as soon as the UE enters the CELL_FACH, CELL_PCH, or URA_PCH state.
T307 is started when T305 expires and the UE detects "out of service area". The length of
T307 is determined by the parameter T307(BSC6900,BSC6910).
T316 is started after the UE in URA_PCH or CELL_PCH state detects "out of service area".
T317 is started when T316 expires or the UE that enters the CELL_FACH state detects "out

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 8


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 3 URA/Cell Update Principles

of service area". T317 never expires and so this parameter need not be set. The length of T316
is determined by the parameter T316(BSC6900,BSC6910).

3.1.7 Cell Update due to RLC Unrecoverable Error


Upon detecting an unrecoverable RLC error in an AM RLC entity, a UE performs a cell
update with a cause value of "RLC unrecoverable error". Then, the RNC performs the
following operations:

l If the UE is in the CELL_PCH or URA_PCH state:


The RNC establishes a new AM RLC entity for the UE when the
PCH_UE_RLC_UNRECOVERABLEERROR_SWITCH check box under the
PROCESSSWITCH4(BSC6900,BSC6910) parameter in the SET
URRCTRLSWITCH command is selected and the unrecoverable RLC error
occurs in RB 2, 3, or 4, or RB n (n is greater than 4).
The RNC releases the UE's RRC connection if the check box is not selected.
l If the UE is in another state:
When the unrecoverable RLC error occurs in RB 2, 3, or 4, the RNC establishes a
new AM RLC entity for the UE if the UE_SRB_RESET_SWITCH check box
under the OptimizationSwitch(BSC6900,BSC6910) parameter in the SET
URRCTRLSWITCH command is selected. If this check box is not selected, the
RNC releases the UE's RRC connection.
When the unrecoverable RLC error occurs in RB m (m is greater than 4), the RNC
establishes a new AM RLC entity for the UE.

For details about RBs, see section 6.3 Signalling Radio Bearers in 3GPP TS 25.331 V9.11.0.

3.1.8 Cell Update due to MBMS PtP RB Request


If the UE is in Cell_FACH, Cell_PCH or URA_PCH state and the UE shall perform cell
update for MBMS ptp radio bearer request, the UE performs cell update with the cause
"MBMS ptp RB request".

3.1.9 Cell Update due to MBMS Reception


If the UE is in Cell_FACH, Cell_PCH, or URA_PCH state and shall perform cell update for
MBMS counting, the UE performs cell update with the cause "MBMS reception".

3.2 Signaling Procedure of URA/Cell Update


The signaling procedures of URA update and cell update are similar. The signaling
procedures are based on section 8.3.1 "Cell and URA update procedures" in 3GPP TS 25.331
V6.6.0.

3.2.1 Signaling Procedure of URA Update

Basic Signaling Procedure of URA Update


Figure 3-1 shows the basic signaling procedure of URA update.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 9


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 3 URA/Cell Update Principles

Figure 3-1 Basic signaling procedure of URA update

The basic signaling procedure is as follows:


1. The UE sends the RNC a URA UPDATE message with either of the following update
causes in the "URA update cause" information element (IE): "periodical URA update" or
"change of URA".
2. The RNC responds to the "URA update cause" IE and then sends a URA UPDATE
CONFIRM message to the UE.
The RNC performs different operations for different URA update causes. For details
about these operations, see section 8.3.1.5 "Reception of an CELL UPDATE/URA
UPDATE message by the UTRAN" in 3GPP TS 25.331 V6.6.0.
The URA UPDATE message over the Iur interface is transferred from the DRNC to the
SRNC through the Uplink Signalling Transfer Indication message. The URA UPDATE
CONFIRM or RRC CONNECTION RELEASE message is transferred from the SRNC to the
DRNC through the Downlink Signalling Transfer Request message. For details, see sections
8.2.1 "uplink Signalling Transfer" and 8.2.2 "Downlink Signalling Transfer" in 3GPP TS
25.423.
The Iur interface can carry the control plane data of common channels. However, whether it
can carry the user plane data of common channels depends on the setting of the
SuppIurCch(BSC6900,BSC6910) parameter. If this parameter is set to YES, the Iur interface
can carry the user plane data of common channels. If this parameter is set to NO, the Iur
interface cannot carry the user plane data of common channels. This function also requires
setting SuppIurCch(BSC6900,BSC6910) to YES on the neighboring RNC.

Signaling Procedure of URA Update with SRNS Relocation


Figure 3-2 shows the signaling procedure of the inter-RNS URA update with SRNS
relocation from RNC 1 to RNC 2.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 10


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 3 URA/Cell Update Principles

Figure 3-2 Signaling procedure of URA update with SRNS relocation

The UE in URA_PCH state establishes an RAB on RNC 1. In this procedure, RNC 1 is the
Serving RNC (SRNC) and RNC 2 is the Drift RNC (DRNC).
The signaling procedure is as follows:
1. The UE in URA_PCH state sends RNC 2 a URA UPDATE message after URA
reselection.
2. The RNC 2 receives the URA UPDATE message from CCCH. Then, RNC 2 sends RNC
1 an UPLINK SIGNALLING TRANSFER INDICATION message, which includes
target RNC-ID, allocated C-RNTI, and D-RNTI.
3. RNC 1 sends the CN a RELOCATION REQUIRED message, requesting SRNS
relocation.
4. The CN sends a RELOCATION REQUEST message to RNC 2.
5. RNC 2 prepares L2 resources for RNC 1 relocation and then sends a RELOCATION
REQUEST ACKNOWLEDGE message to the CN.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 11


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 3 URA/Cell Update Principles

6. The CN sends RNC 1 a RELOCATION COMMAND message, notifying RNC 1 that


SRNS relocation starts.
7. RNC 1 completes related preparations such as stopping signaling and traffic RLCs.
Then, RNC 1 sends a RELOCATION COMMIT message to RNC 2.
8. RNC 2 sends the CN a RELOCATION DETECT message, notifying the CN that the
relocation starts. Then, RNC 2 performs related operations such as L2 configuration.
9. RNC 2 sends the UE a URA UPDATE CONFIRM message in the new cell. The message
includes the old S-RNTI and SRNC ID as well as the new S-RNTI, and C-RNTI.
10. The UE sends an RRC message UTRAN MOBILITY INFORMATION CONFIRM to
RNC 2.
11. RNC 2 sends a RELOCATION COMPLETE message to the CN.
12. RNC 2 sends the UE a UE CAPABILITY ENQUIRY message, querying the capability
information about the UE.
13. The UE sends RNC 2 a UE CAPABILITY INFORMATION message, including the
capability information about the UE.
14. RNC 2 receives the UE CAPABILITY INFORMATION message and sends a UE
CAPABILITY INFORMATION CONFIRM message to the UE.
15. RNC 2 sends the UE a UTRAN MOBILITY INFORMATION message, notifying the
UE of the new UTRAN information.
16. The UE sends a UTRAN MOBILITY INFORMATION CONFIRM message to RNC 2.
17. The CN sends RNC 1 an IU RELEASE COMMAND message, requesting RNC 1 to
release the Iu interface resource related to this UE.
18. RNC 1 sends an IU RELEASE COMPLETE message to the CN.

3.2.2 Signaling Procedure of Cell Update


Basic Signaling Procedure of Cell Update
Figure 3-3 shows the basic signaling procedure of cell update.

Figure 3-3 Basic signaling procedure of cell update

The basic signaling procedure is described as follows:


1. The UE sends the RNC a CELL UPDATE message with a cause in the "cell update
cause" IE.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 12


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 3 URA/Cell Update Principles

2. The RNC performs the corresponding processing, and then sends the UE a CELL
UPDATE CONFIRM message.
When the RNC requires a response from the UE, the RNC starts timer T381 whose
length is specified by the T381 parameter after sending the UE a CELL UPDATE
CONFIRM message. This is to increase the cell update success rate.
If timer T381 expires but the RNC does not receive a response from the UE, the
RNC re-sends the UE a CELL UPDATE CONFIRM message and restarts timer
T381 when the number of times this message is retransmitted is less than the value
of the N381 parameter.
If timer T381 expires but the RNC receives the CELL UPDATE message again
from the UE, the RNC stops timer T381.
During CELL_PCH/URA_PCH-to-CELL_FACH (P2F) state transitions triggered by cell
updates, the P2F_CUC_REPEAT_SWITCH under the
OptimizationSwitch3(BSC6900,BSC6910) parameter in the SET URRCTRLSWITCH
command specifies whether to re-send a CELL UPDATE CONFIRM message to UEs.
3. Based on the information included in a CELL UPDATE CONFIRM message, the UE
determines whether to respond to the message. For details about IEs included in a CELL
UPDATE CONFIRM message, see section 8.3.1.6 "Reception of the CELL UPDATE
CONFIRM/URA UPDATE CONFIRM message by the UE" in 3GPP TS 25.331 V6.6.0.
The UE may respond with any of the following messages:
UTRAN MOBILITY INFORMATION CONFIRM
PHYSICAL CHANNEL RECONFIGURATION COMPLETE
TRANSPORT CHANNEL RECONFIGURATION COMPLETE
RADIO BEARER RECONFIGURATION COMPLETE
RADIO BEARER RELEASE COMPLETE

If the UE changes from CELL_PCH state to URA_PCH state through cell update, the
procedure is as follows:

1. The UE is in CELL_PCH state and sends a CELL UPDATE message with the cause "cell
reselection".
2. If the RNC decides to switch the state of this UE from CELL_PCH to URA_PCH, the
RNC sends the CELL UPDATE CONFIRM message to the UE and sets the "RRC State
Indicator" IE as URA_PCH.
3. The UE enters the URA_PCH state upon reception of the CELL UPDATE CONFIRM
message.

The CELL UPDATE message over the Iur interface is transferred from the DRNC to the
SRNC through the Uplink Signalling Transfer Indication message. The CELL UPDATE
CONFIRM or RRC CONNECTION RELEASE message is transferred from the SRNC to the
DRNC through the Downlink Signalling Transfer Request message. For details, see sections
8.2.1 "uplink Signalling Transfer" and 8.2.2 "Downlink Signalling Transfer" in 3GPP TS
25.423.

The Iur interface can carry the control plane data of common channels. However, whether it
can carry the user plane data of common channels depends on the setting of the
SuppIurCch(BSC6900,BSC6910) parameter. If this parameter is set to YES, the Iur interface
can carry the user plane data of common channels. If this parameter is set to NO, the Iur
interface cannot carry the user plane data of common channels. This function also requires
setting SuppIurCch(BSC6900,BSC6910) to YES on the neighboring RNC.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 13


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 3 URA/Cell Update Principles

Signaling Procedure of Cell Update with SRNS Relocation


Figure 3-4 shows the signaling procedure of the inter-RNS cell update with SRNS relocation
from RNC 1 to RNC 2.

Figure 3-4 Signaling procedure of cell update with SRNS relocation

The UE sets up an RRC connection on RNC 1. The UE is in CELL_FACH or CELL_PCH


state. In this case, RNC 1 is the serving RNC (SRNC) and RNC 2 is the drift RNC (DRNC).
The signaling procedure is described as follows:
1. The UE reselects a cell under RNC 2 and sends RNC 2 a CELL UPDATE message.
2. RNC 2 allocates a C-RNTI and a D-RNTI for the UE. RNC 2 forwards the CELL
UPDATE message received from the CCCH to RNC 1 through an UPLINK
SIGNALLING TRANSFER INDICATION message.
3. RNC 1 sends the CN a RELOCATION REQUIRED message, requesting SRNS
relocation.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 14


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 3 URA/Cell Update Principles

4. The CN sends a RELOCATION REQUEST message to RNC 2.


5. RNC 2 prepares L2 resources for RNC 1 relocation, and then sends the CN a
RELOCATION REQUEST ACKNOWLEDGE message.
6. The CN sends RNC 1 a RELOCATION COMMAND message, notifying RNC 1 that
SRNS relocation starts.
7. RNC 1 completes related preparations such as stopping signaling and traffic RLCs, and
then sends RNC 2 a RELOCATION COMMIT message, requesting RNC 2 to start the
relocation.
8. RNC 2 sends the CN a RELOCATION DETECT message, notifying the CN that the
relocation starts. Then, RNC 2 performs related operations such as L2 configuration.
9. RNC 2 sends the UE a CELL UPDATE CONFIRM message in the new cell, including
the new C-RNTI and S-RNTI.
10. The UE sends RNC 2 an RRC message PHYSICAL CHANNEL RECONFIGURATION
COMPLETE, confirming that the relocation succeeds.
11. RNC 2 sends a RELOCATION COMPLETE message to the CN.
12. RNC 2 sends the UE a UE CAPABILITY ENQUIRY message, querying the capability
information about the UE.
13. The UE sends RNC 2 a UE CAPABILITY INFORMATION message, including the
capability information about the UE.
14. RNC 2 receives the UE CAPABILITY INFORMATION message and sends a UE
CAPABILITY INFORMA CONFIRM message to the UE.
15. RNC 2 sends the UE a UTRAN MOBILITY INFORMATION message, notifying the
UE of the new UTRAN information.
16. The UE sends a UTRAN MOBILITY INFORMATION CONFIRM message to RNC 2.
17. The CN sends RNC 1 an IU RELEASE COMMAND message, requesting RNC 1 to
release the Iu interface resource related to this UE.
18. RNC 1 sends the CN an IU RELEASE COMPLETE message.
NOTE

In the preceding procedure, if the SRNC (RNC 1) is a third-party RNC and the target radio network
controller (RNC 2) is a Huawei RNC, the UE may send any of the following messages after the cell
update with SRNS relocation is complete:
l RADIO BEARER RECONFIGURATION COMPLETE
l UTRAN MOBILITY INFORMATION CONFIRM
l PHYSICAL CHANNEL RECONFIGURATION COMPLETE
l TRANSPORT CHANNEL RECONFIGURATION COMPLETE
When this happens, the call is dropped. You can run the RNC MML command SET
URRCTRLSWITCH with OptimizationSwitch6(BSC6900,BSC6910) set to
FACH_CU_RELOC_RB_MSG_COMP_SWITCH.

Signaling Procedure of Cell Update due to Radio Link Failure


Figure 3-5 shows the signaling procedure of cell update due to a downlink radio link failure.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 15


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 3 URA/Cell Update Principles

Figure 3-5 Example signaling procedure of cell update due to a downlink radio link failure

When receiving a cell update message, the RNC establishes a new RL and deletes the old RL.
The new RL is specified in the cell update message.
If the first attempt to re-establish the RL fails, the RRC connection will be released.
This procedure is supported for both CS and PS RAB.
For PS RAB, this procedure is supported for both DCH and HSDPA bearer.
More detailed description of this procedure is as follows:
1. The UE initiates the re-establishment of the RRC connection in the new cell by sending a
CELL UPDATE message on the CCCH.
2. The RNC allocates radio resources in the new cell and sends an NBAP message RADIO
LINK SETUP REQUEST to the new NodeB.
3. The NodeB allocates resources and responds with an NBAP message RADIO LINK
SETUP RESPONSE.
4. The RNC initiates the setup of Iub data transport bearer by using the Access Link
Control Application Protocol (ALCAP) protocol.
5. The RNC sends the old NodeB a RADIO LINK DELETION REQUEST message to
release the old Iub radio link.
6. Upon releasing the old Iub radio link, the old NodeB sends the RNC a RADIO LINK
DELECTION RESPONSE message.
7. The RNC initiates the release of Iub data transport bearer with the old NodeB by using
the ALCAP protocol.
8. The RNC prepares a CELL UPDATE CONFIRM message and sends it to the UE on the
DCCH.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 16


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 3 URA/Cell Update Principles

9. The UE re-establishes radio connection in the new cell and sends the PHYSICAL
CHANNEL RECONFIGURATION COMPLETE, RADIO REARER
RECONFIGURATION COMPLETE, RADIO BEARER RELEASE COMPLETE, or
TRANSPORT CHANNEL RECONFIGURATION COMPLETE message to the RNC.
Step 4 through step 7 are necessary only when ATM transmission is used over the Iub
interface.

3.3 Automatic FACH Power Compensation During Cell


Updates
On the live network, UEs in weak coverage areas cannot correctly parse messages from the
RAN during the cell update procedure. Eventually, the cell update procedure fails. To address
this issue, the function of automatic FACH power compensation during cell updates is
introduced. This function automatically compensates the power of the FACH that carries the
CELL UPDATE CONFIRM message of a UE in a weak coverage area to increase the rate of
successfully parsing this message.
The FachPowerCellUpdtEcNoThd(BSC6900,BSC6910) parameter controls this function in
the following way:
l This function is disabled when this parameter is set to -24 dB.
l This function is enabled when the parameter value specific to a cell update cause is
greater than the Ec/No included in the CELL UPDATE message that contains the cell
update cause.
Cell update causes are specified by the CellUpdtCause(BSC6900,BSC6910) parameter. To set
the mapping between CellUpdtCause(BSC6900,BSC6910) and
FachPowerCellUpdtEcNoThd(BSC6900,BSC6910), run the SET
UCELLUPDTCTRLSWITCH command.
This function takes effect in the following scenarios:
l Timer T381 whose length is specified by the T381(BSC6900,BSC6910) parameter
expires and the RNC re-sends a CELL UPDATE CONFIRM message to a UE.
For details about how the RNC re-sends CELL UPDATE CONFIRM messages, see
section 3.2.2 Signaling Procedure of Cell Update.
l Timer T302 whose length is specified by the T302(BSC6900,BSC6910) parameter
expires, a UE re-sends a CELL UPDATE message to the RNC, and the RNC sends a
CELL UPDATE CONFIRM message to the UE.
After sending a CELL UPDATE message to the RNC, a UE starts timer T302. If the
timer expires but the UE does not receive a CELL UPDATE CONFIRM message from
the RNC, the UE sends another CELL UPDATE message to the RNC when the number
of times the message is retransmitted is less than the value of the
N302(BSC6900,BSC6910) parameter.
After a FACH's power is compensated, the difference between the FACH transmit power and
the transmit power of the P-CPICH in the same cell is equal to the value of the
MaxFachPower(BSC6900,BSC6910) parameter. When the FACH power is not compensated,
the difference is equal to the MaxFachPower(BSC6900,BSC6910) value subtracted by the
OffsetFACHPower(BSC6900,BSC6910) value.
This function does not take effect when the downlink power load of a cell exceeds the value
of the DlOlcTrigThd(BSC6900,BSC6910) parameter.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 17


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 3 URA/Cell Update Principles

3.4 Optimization of the URA/Cell Update Procedure

3.4.1 Optimization of Cell Update Timeout for UEs in


CELL_FACH State
During a cell update procedure initiated by a UE in the CELL_FACH state, the RNC releases
the UE's RRC connection if it does not receive any response from the UE within a specified
period. However, it is most probably that the UE cannot receive the RRC CONNECTION
RELEASE message from the RNC, and consequently the UE remains in the CELL_FACH
state on the UE side. As a result, the UE's state is inconsistent between the UE and the RNC.

After the algorithm for optimization against the state inconsistency of UEs in the
CELL_FACH state is enabled, the RNC does not immediately release the RRC connection of
a UE in the CELL_FACH state if it does not receive any response from the UE within a
specified period during a cell update procedure. When the UE enters the service area again
and sends a CELL UPDATE message, the RNC can process this message and keeps the UE in
connected mode, which reduces the call drops due to the UE's state inconsistency between the
UE and the RNC and decreases the signaling load.

The STATE_FACH_CONSISTENT_OPTI_SWITCH under the


PROCESSSWITCH5(BSC6900,BSC6910) parameter in the SET URRCTRLSWITCH
command is now used to control whether this algorithm takes effect.

NOTE

Run the command SET UCORRMPARA:


PerfEnhanceSwitch5=PERFENH_FACH_TVM_MC_TIME_OPT_SWITCH-1; to enable the algorithm
for optimizing the time of sending the MEASUREMENT CONTROL message in order to reduce the
call drops caused by MC SRB resets of UEs in the Cell_FACH state.

If a certain type of UE is incompatible with this algorithm, you can run the ADD UIMEITAC
or MOD UIMEITAC command to avoid this problem: In this command, set the TAC by
selecting the SPECUSER_FACH_CONSIS_OPTI_DISABLE_SWITCH check box under
the SpecUserFunctionSwitch3(BSC6900,BSC6910) parameter, which indicates that UEs
using this TAC cannot use this algorithm.

3.4.2 Optimization of Concurrence of the Cell Update and Other


Signaling Procedures
When detecting downlink out-of synchronization, SRB resets, TRB resets, or other causes, a
UE in the CELL_DCH, CELL_FACH, or CELL_PCH state sends a CELL UPDATE message
to the RNC. The cell update and other signaling procedures can concur on live networks. The
concurrence of other signaling procedures and the cell update due to state transitions and
active link reestablishment has been described in State Transition Feature Parameter
Description and Call Reestablishment Feature Parameter Description separately. This section
focuses on the optimization of concurrence of other signaling procedures and the cell update
irrelevant to state transitions and active link reestablishment.

RL reallocation may fail and PS service drops occur in the following scenario:

1. The RNC sends signaling over the Uu interface and waits for a response from the UE.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 18


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 3 URA/Cell Update Principles

2. The RNC receives from the UE a CELL UPDATE message concurrent with the
reception of an Iu interface release message, an SCRI message, or an RL failure message
or the detection of an SRB reset.
The CU_PRI_OVERLAP_OTHER_PROC_SWITCH under the
OptimizationSwitch4(BSC6900,BSC6910) parameter in the SET URRCTRLSWITCH
command is now used to allow the RNC to preferentially process the cell update procedure in
the preceding scenario to reduce PS call drops.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 19


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 4 Engineering Guidelines

4 Engineering Guidelines

4.1 WRFD-010801 Intra RNC Cell Update


This feature is enabled by default, without license control and configuration.

4.2 WRFD-010802 Inter RNC Cell Update


This feature is enabled by default, without license control and configuration.

4.3 WRFD-010901 Intra RNC URA Update


This feature is enabled by default, without license control and configuration.

4.4 WRFD-010902 Inter RNC URA Update


This feature is enabled by default, without license control and configuration.

4.5 Automatic FACH Power Compensation During Cell


Updates

4.5.1 When to Use Automatic FACH Power Compensation During


Cell Updates
Use this function if you want to increase the cell update success rate for specific cell update
causes.

4.5.2 Required Information


1. Determine cell update causes to which this function will apply.
a. Calculate the cell update success rate for different cell update causes using RNC
counters listed in section Performance Monitoring.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 20


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 4 Engineering Guidelines

b. Determine the cell update causes with a low cell update success rate. For example,
you can apply this function to cell update causes whose cell update success rate is
lower than the general cell update success rate of the related cell.
2. Determine cells to which this function will apply.
Based on the previously determined cell update causes, locate cells with a low cell
update success rate.
Before applying this function to these cells, check the values of the
VS.RRC.Rej.DLPower.Cong(BSC6900,BSC6910), and
VS.RAB.FailEstabPS.DLPower.Cong(BSC6900,BSC6910), and
VS.RAB.FailEstabCS.DLPower.Cong(BSC6900,BSC6910) counters. If the values are
large within a certain period of time (for example, one week), you are advised not to use
this function.
3. Run the RNC MML command LST UFACH to locate a FACH whose Bearing Signal
Indication is set to TRUE. Then, obtain the values of the Max Transmit Power of
FACH and Offset between Initial and Max FACHPower parameters for this FACH.
NOTE

You can perform steps 1 and 2 before or after step 3.

4.5.3 Deployment
This section describes how to activate, verify, and deactivate the function of automatic FACH
power compensation during cell updates.

4.5.3.1 Requirements
l Dependencies on Hardware
None
l Dependencies on Other Features
This function does not depend on any feature.
l License
This function is not under license control.
This feature is not under license control.
l Others
None

4.5.3.2 Data Preparation


Table 4-1 lists the data to prepare before deploying the automatic FACH power compensation
in case of cell update failures function.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 21


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 4 Engineering Guidelines

Table 4-1 Data to prepare before deploying the automatic FACH power compensation in case
of cell update failures function
Parameter Parameter Setting Notes Data Source Remarks
Name ID

cell update cause CellUpdtCaus None Radio Planning NE: RNC


e(BSC6900,B (Internal MO:
SC6910) planning) UCELLUPD
Ec/N0 threshold FachPowerCe The Radio Planning TCTRLSWI
for determining llUpdtEcNoT recommended (Internal TCH
whether to add hd(BSC6900, value is -13 dB. planning) Batch
power on FACH BSC6910) modification
on the CME
is supported.

Max Transmit MaxFachPow The Radio Planning NE: RNC


Power of FACH er(BSC6900, recommended (Internal MO: UFACH
BSC6910) value is 2 dB. planning)
Batch
Offset between OffsetFACHP The Default/ modification
Initial and Max ower(BSC690 recommended Recommended on the CME
FACHPower 0,BSC6910) value is 1 dB. Value is not
supported.
NOTE
Perform this
operation on
only FACHs
that carry
signaling
messages.
Run the RNC
MML
command
LST UFACH
to locate a
FACH whose
Bearing
Signal
Indication is
set to TRUE.

4.5.3.3 Precautions
If signaling storms or traffic bursts occur, for example, during large gatherings and holidays,
this function will aggravate power resource congestion.

4.5.3.4 Activation

Activation (Using MML Commands)


Step 1 Run the RNC MML command SET UCELLUPDTCTRLSWITCH and set the mapping
between the Ec/N0 threshold for determining whether to add power on FACH value and

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 22


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 4 Engineering Guidelines

each value of the cell update cause parameter. The recommended value for Ec/N0 threshold
for determining whether to add power on FACH is -13 dB.
Step 2 Run the RNC MML command ADD UFACH or MOD UFACH and specify Max Transmit
Power of FACH and Offset between Initial and Max FACHPower for FACHs carrying
signaling messages. The recommended value for the former parameter is 2 dB and that for the
latter parameter is 1 dB.
Run the RNC MML command LST UFACH to locate a FACH whose Bearing Signal
Indication is set to TRUE.

----End

MML Command Examples


//Enabling the automatic FACH power compensation in case of cell update failures
function
SET UCELLUPDTCTRLSWITCH: CellUpdtCause=UPLINKDATATRANSMISSION,
FachPowerCellUpdtEcNoThd=-13;
ADD UFACH:CELLID=1111, TRCHID=4, PHYCHID=8, TTI=T10, RATEMATCHINGATTR=220,
MAXCMCHPI=D15, MINCMCHPI=D14, SIGRBIND=TRUE, CHCODINGTYPE=CONVOLUTIONAL,
CODINGRATE=D1/2, TOAWS=35, TOAWE=10, MAXFACHPOWER=20, OffsetFACHPower=10;
MOD UFACH: CellId=1111, TrChId=4, MaxFachPower=20, OffsetFACHPower=10;

Activation (Using the CME)


Based on the parameter configurations involved in 4.5.3.2 Data Preparation, perform the
following operations to activate this feature:

Step 1 Configure a single object (such as a cell) on the CME.


Set parameters listed in the table in "Data Preparation" section from top to bottom on the
CME. For instructions on how to perform the CME single configuration, see CME Single
Configuration Operation Guide.
Step 2 (Optional) Modify objects in batches on the CME. (CME batch modification center)

To modify objects in batches, click on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 while running the wizard to obtain online help.
To check whether a parameter supports batch modification, see the Remarks column in the
table in "Data Preparation" section.

NOTE

When configuring the feature on the CME, perform a single configuration first, and then perform a batch
modification if required.
Configure the parameters of a single object before a batch modification. Perform a batch modification
before logging out of the parameter setting interface.

----End

4.5.3.5 Activation Observation


On an RNC LMT, start a cell tracing task.
l If the value of the Transmit Power Level IE included in a FACH FP is 0 (as shown in
Figure 4-1), the function has been enabled.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 23


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 4 Engineering Guidelines

NOTE

This function does not take effect if a cell enters the overload control state due to downlink power
congestion.
l If the IE value is equal to the Offset between Initial and Max FACHPower value (as
shown in Figure 4-2), the function does not take effect.

Figure 4-1 IE value when a CELL UPDATE CONFIRM message is carried over a DCCH

NOTE

When a CELL UPDATE CONFIRM message is carried over a DCCH, the Cell update message is not
included in the cell tracing results.

Figure 4-2 IE value when a CELL UPDATE CONFIRM message is carried over a CCCH

Perform the following steps to trace the signaling messages of a cell:

Step 1 Run the RNC MML command LST USCCPCH to set Cell ID and obtain the number of
SCCPCHs and SCCPCH ID configured for a cell.

Step 2 Run the RNC MML command LST UFACH to set Cell ID and obtain the SCCPCH ID of a
transmission channel whose Bearing Signal Indication is set to TRUE.

Step 3 Start a tracing task (Debug Mode) on the Cell Trace interface of the LMT.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 24


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 4 Engineering Guidelines

Step 4 On the FMR tab page of the Cell Trace dialog box, select Layer 2 data transfer Periodic
Report and CCH Data Report and specify Report Period(100ms) and SCCPCH ID 1. The
configuration requirements are as follows:
l It is recommended that Report Period(100ms) be set to 20.
l If there is only one SCCPCH, enter the corresponding SCCPCH ID for SCCPCH ID 1.
l If there are two SCCPCHs, the SCCPCH ID for SCCPCH ID 1 must be the SCCPCH
ID of the transmission channel whose Bearing Signal Indication is set to TRUE.
Step 5 Start cell tracing.

----End

4.5.3.6 Deactivation
The following table describes the parameters for deactivating this feature.

Parameter Parameter ID Setting Notes Remarks


Name

cell update CellUpdtCause(BS None NE: RNC


cause C6900,BSC6910) MO:
Ec/N0 threshold FachPowerCellUp The UCELLUPDTCTRLSWIT
for determining dtEcNoThd(BSC6 recommended CH
whether to add 900,BSC6910) value is -24 dB. Batch modification on the
power on FACH CME is supported.

Feature deactivation can be performed using the CME or MML commands.

Deactivation (Using MML Commands)


Run the RNC MML command SET UCELLUPDTCTRLSWITCH and set Ec/N0
threshold for determining whether to add power on FACH to -24 dB for different values
of the cell update cause parameter.

Deactivation (MML Command Examples)


//Disabling the automatic FACH power compensation in case of cell update failures
function
SET UCELLUPDTCTRLSWITCH: CellUpdtCause=UPLINKDATATRANSMISSION,
FachPowerCellUpdtEcNoThd=-24;

Deactivation (Using the CME)


The method of feature deactivation using the CME is the same as that of feature activation
using the CME. For detailed operations, see 4.5.3.4 Activation.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 25


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 4 Engineering Guidelines

4.5.4 Performance Monitoring

Cell Update Success Rate


For cell update causes to which this function applies, calculate the cell update success rate for
each of them using the following formula:

Cell update success rate = (Number of successful cell updates/Number of cell update
attempts)*100%

The preceding formula can also be used to calculate the cell update success rate for the entire
cell.

Table 4-2 Counters related to the number of cell update attempts due to different reasons
Counter ID Counter Name Description

67192569 VS.AttCellUpdt(BSC6900, Number of Cell Updates for Cell


BSC6910)

67180378 VS.AttCellUpdt.RLFail(BS Number of Cell Updates Due to Radio


C6900,BSC6910) Link Failure for Cell

67192571 VS.AttCellUpdt.ErrTRB(B Number of Cell Updates Due to TRB


SC6900,BSC6910) RLC Unrecoverable Error for Cell

67192570 VS.AttCellUpdt.ErrSRB(B Number of Cell Updates Due to SRB


SC6900,BSC6910) RLC Unrecoverable Error for Cell

67180372 VS.AttCellUpdt.Prd(BSC6 Number of Periodical Cell Updates for


900,BSC6910) Cell

67180373 VS.AttCellUpdt.Resel(BSC Number of Cell Updates Due to Cell


6900,BSC6910) Reselection for Cell

67180374 VS.AttCellUpdt.RSA(BSC Number of Cell Updates Due to Re-


6900,BSC6910) Entering Service Area for Cell

67180375 VS.AttCellUpdt.PageRsp( Number of Cell Updates Due to Paging


BSC6900,BSC6910) Response for Cell

67180376 VS.AttCellUpdt.ULDataTr Number of Cell Updates Due to Uplink


ans(BSC6900,BSC6910) Data Transmission for Cell

Table 4-3 Counters related to the number of successful cell updates with different reasons
Counter ID Counter Name Description

67180371 VS.SuccCellUpdt(BSC6900 Number of Successful Cell Updates for


,BSC6910) Cell

67189767 VS.SuccCellUpdt.RLFail(B Number of Successful Cell Updates Due


SC6900,BSC6910) to Radio Link Failure for Cell

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 26


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 4 Engineering Guidelines

Counter ID Counter Name Description

67192572 VS.SuccCellUpdt.ErrTRB( Number of Successful Cell Updates Due


BSC6900,BSC6910) to TRB RLC Unrecoverable Error for
Cell

73423781 VS.SuccCellUpdt.ErrSRB( Number of Successful Cell Updates Due


BSC6900,BSC6910) to SRB RLC Unrecoverable Error for
Cell

67180379 VS.SuccCellUpdt.Prd(BSC Number of Successful Periodical Cell


6900,BSC6910) Updates for Cell

67180380 VS.SuccCellUpdt.Resel(BS Number of Successful Cell Updates Due


C6900,BSC6910) to Cell Reselection for Cell

67180381 VS.SuccCellUpdt.Rsa(BSC Number of Successful Cell Updates Due


6900,BSC6910) to Re-Entering Service Area for Cell

67180382 VS.SuccCellUpdt.PageRsp( Number of Successful Cell Updates Due


BSC6900,BSC6910) to Paging Response for Cell

67180383 VS.SuccCellUpdt.ULData Number of Successful Cell Updates Due


Trans(BSC6900,BSC6910) to Uplink Data Transmission for Cell

Downlink Power Resource Congestion


After this function is activated in a cell, query the values of the
VS.RRC.Rej.DLPower.Cong(BSC6900,BSC6910),
VS.RAB.FailEstabCS.DLPower.Cong(BSC6900,BSC6910), and
VS.RAB.FailEstabPS.DLPower.Cong(BSC6900,BSC6910) counters. If any value increases
after function activation, downlink power resource congestion in the cell becomes severer.

4.5.5 Parameter Optimization


After the function is activated in a cell, if the cell update success rate decreases for a cell
update cause and downlink power resource congestion becomes severer, you are advised to
disable this function to take effect by setting the MaxFachPower(BSC6900,BSC6910) and
OffsetFACHPower(BSC6900,BSC6910) parameters to the values used before function
activation.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 27


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

5 Parameters

Table 5-1 Parameters


Parame NE MML Feature Feature Description
ter ID Comma ID Name
nd

RsvSwit BSC690 SET None None Meaning:


ch21 0 UALGO RR algorithm reserved U32 Switch Parameter 21. The
RSVPA 32-bit parameter is reserved for further change request
RA use.
Disuse statement: This parameter is used temporarily
in patch versions and will be replaced with a new
parameter in later versions. The new parameter ID
reflects the parameter function. Therefore, this
parameter is not recommended for the configuration
interface.
GUI Value Range: RESERVED_SWITCH_21_BIT1,
RESERVED_SWITCH_21_BIT2,
RESERVED_SWITCH_21_BIT3,
RESERVED_SWITCH_21_BIT4,
RESERVED_SWITCH_21_BIT5,
RESERVED_SWITCH_21_BIT6,
RESERVED_SWITCH_21_BIT7,
RESERVED_SWITCH_21_BIT8,
RESERVED_SWITCH_21_BIT9,
RESERVED_SWITCH_21_BIT10,
RESERVED_SWITCH_21_BIT11,
RESERVED_SWITCH_21_BIT12,
RESERVED_SWITCH_21_BIT13,
RESERVED_SWITCH_21_BIT14,
RESERVED_SWITCH_21_BIT15,
RESERVED_SWITCH_21_BIT16,
RESERVED_SWITCH_21_BIT17,
RESERVED_SWITCH_21_BIT18,
RESERVED_SWITCH_21_BIT19,
RESERVED_SWITCH_21_BIT20,
RESERVED_SWITCH_21_BIT21,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 28


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

RESERVED_SWITCH_21_BIT22,
RESERVED_SWITCH_21_BIT23,
RESERVED_SWITCH_21_BIT24,
RESERVED_SWITCH_21_BIT25,
RESERVED_SWITCH_21_BIT26,
RESERVED_SWITCH_21_BIT27,
RESERVED_SWITCH_21_BIT28,
RESERVED_SWITCH_21_BIT29,
RESERVED_SWITCH_21_BIT30,
RESERVED_SWITCH_21_BIT31,
RESERVED_SWITCH_21_BIT32
Unit: None
Actual Value Range:
RESERVED_SWITCH_21_BIT1,
RESERVED_SWITCH_21_BIT2,
RESERVED_SWITCH_21_BIT3,
RESERVED_SWITCH_21_BIT4,
RESERVED_SWITCH_21_BIT5,
RESERVED_SWITCH_21_BIT6,
RESERVED_SWITCH_21_BIT7,
RESERVED_SWITCH_21_BIT8,
RESERVED_SWITCH_21_BIT9,
RESERVED_SWITCH_21_BIT10,
RESERVED_SWITCH_21_BIT11,
RESERVED_SWITCH_21_BIT12,
RESERVED_SWITCH_21_BIT13,
RESERVED_SWITCH_21_BIT14,
RESERVED_SWITCH_21_BIT15,
RESERVED_SWITCH_21_BIT16,
RESERVED_SWITCH_21_BIT17,
RESERVED_SWITCH_21_BIT18,
RESERVED_SWITCH_21_BIT19,
RESERVED_SWITCH_21_BIT20,
RESERVED_SWITCH_21_BIT21,
RESERVED_SWITCH_21_BIT22,
RESERVED_SWITCH_21_BIT23,
RESERVED_SWITCH_21_BIT24,
RESERVED_SWITCH_21_BIT25,
RESERVED_SWITCH_21_BIT26,
RESERVED_SWITCH_21_BIT27,
RESERVED_SWITCH_21_BIT28,
RESERVED_SWITCH_21_BIT29,
RESERVED_SWITCH_21_BIT30,
RESERVED_SWITCH_21_BIT31,
RESERVED_SWITCH_21_BIT32
Default Value: RESERVED_SWITCH_21_BIT1:0,
RESERVED_SWITCH_21_BIT2:0,
RESERVED_SWITCH_21_BIT3:0,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 29


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

RESERVED_SWITCH_21_BIT4:0,
RESERVED_SWITCH_21_BIT5:0,
RESERVED_SWITCH_21_BIT6:0,
RESERVED_SWITCH_21_BIT7:0,
RESERVED_SWITCH_21_BIT8:0,
RESERVED_SWITCH_21_BIT9:0,
RESERVED_SWITCH_21_BIT10:0,
RESERVED_SWITCH_21_BIT11:0,
RESERVED_SWITCH_21_BIT12:0,
RESERVED_SWITCH_21_BIT13:0,
RESERVED_SWITCH_21_BIT14:0,
RESERVED_SWITCH_21_BIT15:0,
RESERVED_SWITCH_21_BIT16:0,
RESERVED_SWITCH_21_BIT17:0,
RESERVED_SWITCH_21_BIT18:0,
RESERVED_SWITCH_21_BIT19:0,
RESERVED_SWITCH_21_BIT20:0,
RESERVED_SWITCH_21_BIT21:0,
RESERVED_SWITCH_21_BIT22:0,
RESERVED_SWITCH_21_BIT23:0,
RESERVED_SWITCH_21_BIT24:0,
RESERVED_SWITCH_21_BIT25:0,
RESERVED_SWITCH_21_BIT26:0,
RESERVED_SWITCH_21_BIT27:0,
RESERVED_SWITCH_21_BIT28:0,
RESERVED_SWITCH_21_BIT29:0,
RESERVED_SWITCH_21_BIT30:0,
RESERVED_SWITCH_21_BIT31:0,
RESERVED_SWITCH_21_BIT32:0

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 30


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

RsvSwit BSC691 SET None None Meaning:


ch21 0 UALGO RR algorithm reserved U32 Switch Parameter 21. The
RSVPA 32-bit parameter is reserved for further change request
RA use.
Disuse statement: This parameter is used temporarily
in patch versions and will be replaced with a new
parameter in later versions. The new parameter ID
reflects the parameter function. Therefore, this
parameter is not recommended for the configuration
interface.
GUI Value Range: RESERVED_SWITCH_21_BIT1,
RESERVED_SWITCH_21_BIT2,
RESERVED_SWITCH_21_BIT3,
RESERVED_SWITCH_21_BIT4,
RESERVED_SWITCH_21_BIT5,
RESERVED_SWITCH_21_BIT6,
RESERVED_SWITCH_21_BIT7,
RESERVED_SWITCH_21_BIT8,
RESERVED_SWITCH_21_BIT9,
RESERVED_SWITCH_21_BIT10,
RESERVED_SWITCH_21_BIT11,
RESERVED_SWITCH_21_BIT12,
RESERVED_SWITCH_21_BIT13,
RESERVED_SWITCH_21_BIT14,
RESERVED_SWITCH_21_BIT15,
RESERVED_SWITCH_21_BIT16,
RESERVED_SWITCH_21_BIT17,
RESERVED_SWITCH_21_BIT18,
RESERVED_SWITCH_21_BIT19,
RESERVED_SWITCH_21_BIT20,
RESERVED_SWITCH_21_BIT21,
RESERVED_SWITCH_21_BIT22,
RESERVED_SWITCH_21_BIT23,
RESERVED_SWITCH_21_BIT24,
RESERVED_SWITCH_21_BIT25,
RESERVED_SWITCH_21_BIT26,
RESERVED_SWITCH_21_BIT27,
RESERVED_SWITCH_21_BIT28,
RESERVED_SWITCH_21_BIT29,
RESERVED_SWITCH_21_BIT30,
RESERVED_SWITCH_21_BIT31,
RESERVED_SWITCH_21_BIT32
Unit: None
Actual Value Range:
RESERVED_SWITCH_21_BIT1,
RESERVED_SWITCH_21_BIT2,
RESERVED_SWITCH_21_BIT3,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 31


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

RESERVED_SWITCH_21_BIT4,
RESERVED_SWITCH_21_BIT5,
RESERVED_SWITCH_21_BIT6,
RESERVED_SWITCH_21_BIT7,
RESERVED_SWITCH_21_BIT8,
RESERVED_SWITCH_21_BIT9,
RESERVED_SWITCH_21_BIT10,
RESERVED_SWITCH_21_BIT11,
RESERVED_SWITCH_21_BIT12,
RESERVED_SWITCH_21_BIT13,
RESERVED_SWITCH_21_BIT14,
RESERVED_SWITCH_21_BIT15,
RESERVED_SWITCH_21_BIT16,
RESERVED_SWITCH_21_BIT17,
RESERVED_SWITCH_21_BIT18,
RESERVED_SWITCH_21_BIT19,
RESERVED_SWITCH_21_BIT20,
RESERVED_SWITCH_21_BIT21,
RESERVED_SWITCH_21_BIT22,
RESERVED_SWITCH_21_BIT23,
RESERVED_SWITCH_21_BIT24,
RESERVED_SWITCH_21_BIT25,
RESERVED_SWITCH_21_BIT26,
RESERVED_SWITCH_21_BIT27,
RESERVED_SWITCH_21_BIT28,
RESERVED_SWITCH_21_BIT29,
RESERVED_SWITCH_21_BIT30,
RESERVED_SWITCH_21_BIT31,
RESERVED_SWITCH_21_BIT32
Default Value: RESERVED_SWITCH_21_BIT1:0,
RESERVED_SWITCH_21_BIT2:0,
RESERVED_SWITCH_21_BIT3:0,
RESERVED_SWITCH_21_BIT4:0,
RESERVED_SWITCH_21_BIT5:0,
RESERVED_SWITCH_21_BIT6:0,
RESERVED_SWITCH_21_BIT7:0,
RESERVED_SWITCH_21_BIT8:0,
RESERVED_SWITCH_21_BIT9:0,
RESERVED_SWITCH_21_BIT10:0,
RESERVED_SWITCH_21_BIT11:0,
RESERVED_SWITCH_21_BIT12:0,
RESERVED_SWITCH_21_BIT13:0,
RESERVED_SWITCH_21_BIT14:0,
RESERVED_SWITCH_21_BIT15:0,
RESERVED_SWITCH_21_BIT16:0,
RESERVED_SWITCH_21_BIT17:0,
RESERVED_SWITCH_21_BIT18:0,
RESERVED_SWITCH_21_BIT19:0,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 32


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

RESERVED_SWITCH_21_BIT20:0,
RESERVED_SWITCH_21_BIT21:0,
RESERVED_SWITCH_21_BIT22:0,
RESERVED_SWITCH_21_BIT23:0,
RESERVED_SWITCH_21_BIT24:0,
RESERVED_SWITCH_21_BIT25:0,
RESERVED_SWITCH_21_BIT26:0,
RESERVED_SWITCH_21_BIT27:0,
RESERVED_SWITCH_21_BIT28:0,
RESERVED_SWITCH_21_BIT29:0,
RESERVED_SWITCH_21_BIT30:0,
RESERVED_SWITCH_21_BIT31:0,
RESERVED_SWITCH_21_BIT32:0

T305 BSC690 SET WRFD- 3GPP Meaning: Timer 305. T305 starts when a UE enters
0 UCONN 010101 R9 the CELL_FACH, URA_PCH, or CELL_PCH state. If
MODET WRFD- Specific the UE receives a CELL UPDATE CONFIRM/URA
IMER 010801 ations UPDATE CONFIRM message and the UE enters the
Intra CELL_FACH, URA_PCH, or CELL_PCH state after
WRFD- state transition, T305 also starts. T305 stops when the
010802 RNC
Cell UE enters another state. When T305 expires, the UE
WRFD- Update sends a CELL UPDATE message if the UE detects "in
010902 service area" and T307 does not start. If the UE
Inter detects "out of service area" when T305 expires, T307
WRFD- RNC
010901 starts. The protocol-defined default value is 30. When
Cell this parameter is set to INFINITY, the value will not
Update be updated. The value of this parameter is contained
Inter in SIB1 messages.
RNC GUI Value Range: INFINITY, D5, D10, D30, D60,
URA D120, D360, D720
Update
Unit: min
Intra
RNC Actual Value Range: INFINITY, 5, 10, 30, 60, 120,
URA 360, 720
Update Default Value: D30

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 33


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

T305 BSC691 SET WRFD- 3GPP Meaning: Timer 305. T305 starts when a UE enters
0 UCONN 010101 R9 the CELL_FACH, URA_PCH, or CELL_PCH state. If
MODET WRFD- Specific the UE receives a CELL UPDATE CONFIRM/URA
IMER 010801 ations UPDATE CONFIRM message and the UE enters the
Intra CELL_FACH, URA_PCH, or CELL_PCH state after
WRFD- state transition, T305 also starts. T305 stops when the
010802 RNC
Cell UE enters another state. When T305 expires, the UE
WRFD- Update sends a CELL UPDATE message if the UE detects "in
010902 service area" and T307 does not start. If the UE
Inter detects "out of service area" when T305 expires, T307
WRFD- RNC
010901 starts. The protocol-defined default value is 30. When
Cell this parameter is set to INFINITY, the value will not
Update be updated. The value of this parameter is contained
Inter in SIB1 messages.
RNC GUI Value Range: INFINITY, D5, D10, D30, D60,
URA D120, D360, D720
Update
Unit: min
Intra
RNC Actual Value Range: INFINITY, 5, 10, 30, 60, 120,
URA 360, 720
Update Default Value: D30

T302 BSC690 SET WRFD- Intra Meaning: Timer 302. T302 starts when a UE sends a
0 UCONN 010901 RNC CELL UPDATE/URA UPDATE message and stops
MODET WRFD- URA when the UE receives a CELL UPDATE
IMER 010902 Update CONFIRM/URA UPDATE CONFIRM message.
Inter When T302 expires, the UE resends a CELL
WRFD- UPDATE/URA UPDATE message if the value of the
010101 RNC
URA counter V302 is smaller than or equal to that of the
WRFD- Update parameter N302. If the value of V302 is larger than
040100 that of N302 when T302 expires, the UE enters the
3GPP idle mode. The protocol-defined default value is 4000.
WRFD- R9
140103 The value of this parameter is contained in SIB1
Specific messages.
WRFD- ations
010801 GUI Value Range: D100, D200, D400, D600, D800,
Flow D1000, D1200, D1400, D1600, D1800, D2000,
WRFD- Control D3000, D4000, D6000, D8000
010802 Call Unit: ms
Reestabl
ishment Actual Value Range: 100, 200, 400, 600, 800, 1000,
1200, 1400, 1600, 1800, 2000, 3000, 4000, 6000,
Intra 8000
RNC
Cell Default Value: D2000
Update
Inter
RNC
Cell
Update

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 34


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

T302 BSC691 SET WRFD- Intra Meaning: Timer 302. T302 starts when a UE sends a
0 UCONN 010901 RNC CELL UPDATE/URA UPDATE message and stops
MODET WRFD- URA when the UE receives a CELL UPDATE
IMER 010902 Update CONFIRM/URA UPDATE CONFIRM message.
Inter When T302 expires, the UE resends a CELL
WRFD- UPDATE/URA UPDATE message if the value of the
010101 RNC
URA counter V302 is smaller than or equal to that of the
WRFD- Update parameter N302. If the value of V302 is larger than
040100 that of N302 when T302 expires, the UE enters the
3GPP idle mode. The protocol-defined default value is 4000.
WRFD- R9
140103 The value of this parameter is contained in SIB1
Specific messages.
WRFD- ations
010801 GUI Value Range: D100, D200, D400, D600, D800,
Flow D1000, D1200, D1400, D1600, D1800, D2000,
WRFD- Control D3000, D4000, D6000, D8000
010802 Call Unit: ms
Reestabl
ishment Actual Value Range: 100, 200, 400, 600, 800, 1000,
1200, 1400, 1600, 1800, 2000, 3000, 4000, 6000,
Intra 8000
RNC
Cell Default Value: D2000
Update
Inter
RNC
Cell
Update

T307 BSC690 SET WRFD- 3GPP Meaning: Timer 307. T307 starts when T305 expires
0 UCONN 010101 R9 and the UE detects "out of service area." T307 stops
MODET WRFD- Specific when the UE detects "in service area." When T307
IMER 010801 ations expires, the UE enters the idle mode. The protocol-
Intra defined default value is 30. The value of this
WRFD- parameter is contained in SIB1 messages.
010802 RNC
Cell GUI Value Range: D5, D10, D15, D20, D30, D40,
WRFD- Update D50
010902
Inter Unit: s
WRFD- RNC
010901 Actual Value Range: 5, 10, 15, 20, 30, 40, 50
Cell
Update Default Value: D30

Inter
RNC
URA
Update
Intra
RNC
URA
Update

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 35


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

T307 BSC691 SET WRFD- 3GPP Meaning: Timer 307. T307 starts when T305 expires
0 UCONN 010101 R9 and the UE detects "out of service area." T307 stops
MODET WRFD- Specific when the UE detects "in service area." When T307
IMER 010801 ations expires, the UE enters the idle mode. The protocol-
Intra defined default value is 30. The value of this
WRFD- parameter is contained in SIB1 messages.
010802 RNC
Cell GUI Value Range: D5, D10, D15, D20, D30, D40,
WRFD- Update D50
010902
Inter Unit: s
WRFD- RNC
010901 Actual Value Range: 5, 10, 15, 20, 30, 40, 50
Cell
Update Default Value: D30

Inter
RNC
URA
Update
Intra
RNC
URA
Update

N302 BSC690 SET WRFD- Intra Meaning: Maximum number of retransmissions of the
0 UCONN 010901 RNC CELL UPDATE/URA UPDATE message. The
MODET WRFD- URA protocol-defined default value is 3. The value of this
IMER 010902 Update parameter is contained in SIB1 messages.
WRFD- Inter GUI Value Range: 0~7
010101 RNC Unit: None
URA
WRFD- Update Actual Value Range: 0~7
140103 Default Value: 3
3GPP
WRFD- R9
010801 Specific
WRFD- ations
010802 Call
Reestabl
ishment
Intra
RNC
Cell
Update
Inter
RNC
Cell
Update

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 36


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

N302 BSC691 SET WRFD- Intra Meaning: Maximum number of retransmissions of the
0 UCONN 010901 RNC CELL UPDATE/URA UPDATE message. The
MODET WRFD- URA protocol-defined default value is 3. The value of this
IMER 010902 Update parameter is contained in SIB1 messages.
WRFD- Inter GUI Value Range: 0~7
010101 RNC Unit: None
URA
WRFD- Update Actual Value Range: 0~7
140103 Default Value: 3
3GPP
WRFD- R9
010801 Specific
WRFD- ations
010802 Call
Reestabl
ishment
Intra
RNC
Cell
Update
Inter
RNC
Cell
Update

URAId BSC690 ADD WRFD- 3GPP Meaning: Identity of the UTRAN registration area.
0 UCELL 010101 R9 The URA is only used by the UTRAN and the CN
URA Specific does not know the URA. The URA consists of
RMV ations multiple cells. When the UE enters the URA-PCH
UCELL state, the location of the UE is identified with the
URA URA ID.The URA is an area covered by cells. In this
area, a UE in the URA_PCH state does not need to
frequently perform cell update. One cell can belong to
multiple URAs. The RNC identifies a URA by using
the URA ID. Each URA ID is uniquely numbered
within a RNC. The URA IDs range from 0 to 65535.
For details about this parameter, see 3GPP TS 25.331
protocol.
GUI Value Range: 0~65535
Unit: None
Actual Value Range: 0~65535
Default Value: None

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 37


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

URAId BSC691 ADD WRFD- 3GPP Meaning: Identity of the UTRAN registration area.
0 UCELL 010101 R9 The URA is only used by the UTRAN and the CN
URA Specific does not know the URA. The URA consists of
RMV ations multiple cells. When the UE enters the URA-PCH
UCELL state, the location of the UE is identified with the
URA URA ID.The URA is an area covered by cells. In this
area, a UE in the URA_PCH state does not need to
frequently perform cell update. One cell can belong to
multiple URAs. The RNC identifies a URA by using
the URA ID. Each URA ID is uniquely numbered
within a RNC. The URA IDs range from 0 to 65535.
For details about this parameter, see 3GPP TS 25.331
protocol.
GUI Value Range: 0~65535
Unit: None
Actual Value Range: 0~65535
Default Value: None

ConnQh BSC690 ADD WRFD- Intra Meaning: Hysteresis value of the serving cell in
yst1s 0 UCELL 010901 RNC connected mode when "QualMeas" is set to
SELRE WRFD- URA CPICH_RSCP(CPICH RSCP).The sum of the
SEL 010801 Update measurement value of the serving cell and the
MOD Intra hysteresis value is used in the R criteria for cell
WRFD- reselection. For details about this parameter, see 3GPP
UCELL 010802 RNC
SELRE Cell TS 25.304.
SEL WRFD- Update GUI Value Range: 0~20
010902
Inter Unit: 2dB
RNC Actual Value Range: 0~40
Cell
Update Default Value: 2

Inter
RNC
URA
Update

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 38


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

ConnQh BSC691 ADD WRFD- Intra Meaning: Hysteresis value of the serving cell in
yst1s 0 UCELL 010901 RNC connected mode when "QualMeas" is set to
SELRE WRFD- URA CPICH_RSCP(CPICH RSCP).The sum of the
SEL 010801 Update measurement value of the serving cell and the
MOD Intra hysteresis value is used in the R criteria for cell
WRFD- reselection. For details about this parameter, see 3GPP
UCELL 010802 RNC
SELRE Cell TS 25.304.
SEL WRFD- Update GUI Value Range: 0~20
010902
Inter Unit: 2dB
RNC Actual Value Range: 0~40
Cell
Update Default Value: 2

Inter
RNC
URA
Update

ConnQh BSC690 ADD WRFD- Intra Meaning: Hysteresis value of the serving cell in
yst2s 0 UCELL 010901 RNC connected mode when "QualMeas" is set to
SELRE WRFD- URA CPICH_ECNO(CPICH Ec/N0). The sum of the
SEL 010801 Update measurement value of the serving cell and the
MOD Intra hysteresis value is used in the R criteria for cell
WRFD- reselection. For details about this parameter, see 3GPP
UCELL 010802 RNC
SELRE Cell TS 25.304.
SEL WRFD- Update GUI Value Range: 0~20;255
010902
Inter Unit: 2dB
RNC Actual Value Range: 0~40, 255
Cell
Update Default Value: 1

Inter
RNC
URA
Update

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 39


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

ConnQh BSC691 ADD WRFD- Intra Meaning: Hysteresis value of the serving cell in
yst2s 0 UCELL 010901 RNC connected mode when "QualMeas" is set to
SELRE WRFD- URA CPICH_ECNO(CPICH Ec/N0). The sum of the
SEL 010801 Update measurement value of the serving cell and the
MOD Intra hysteresis value is used in the R criteria for cell
WRFD- reselection. For details about this parameter, see 3GPP
UCELL 010802 RNC
SELRE Cell TS 25.304.
SEL WRFD- Update GUI Value Range: 0~20;255
010902
Inter Unit: 2dB
RNC Actual Value Range: 0~40, 255
Cell
Update Default Value: 1

Inter
RNC
URA
Update

QualMe BSC690 ADD WRFD- Intra Meaning: Measurement quantity of cell selection and
as 0 UCELL 010801 RNC reselection. For details about this parameter, see 3GPP
SELRE WRFD- Cell TS 25.304.
SEL 010802 Update GUI Value Range: CPICH_ECNO(CPICH Ec/N0),
MOD Inter CPICH_RSCP(CPICH RSCP)
UCELL RNC Unit: None
SELRE Cell
SEL Update Actual Value Range: CPICH_ECNO, CPICH_RSCP
Default Value: CPICH_ECNO(CPICH Ec/N0)

QualMe BSC691 ADD WRFD- Intra Meaning: Measurement quantity of cell selection and
as 0 UCELL 010801 RNC reselection. For details about this parameter, see 3GPP
SELRE WRFD- Cell TS 25.304.
SEL 010802 Update GUI Value Range: CPICH_ECNO(CPICH Ec/N0),
MOD Inter CPICH_RSCP(CPICH RSCP)
UCELL RNC Unit: None
SELRE Cell
SEL Update Actual Value Range: CPICH_ECNO, CPICH_RSCP
Default Value: CPICH_ECNO(CPICH Ec/N0)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 40


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Qqualmi BSC690 ADD WRFD- Intra Meaning: The minimum required quality threshold
n 0 UCELL 010801 RNC corresponding to CPICH Ec/No. When the measured
SELRE WRFD- Cell CPICH Ec/No is larger than the value of this
SEL 010802 Update parameter, the cell meets the S criteria of quality level
MOD Inter for cell selection/reselection. The RNC decides
UCELL RNC whether the UE can camp on the cell according to the
SELRE Cell cell selection/reselection criteria. For details about this
SEL Update parameter, see 3GPP TS 25.304.
GUI Value Range: -24~0
Unit: dB
Actual Value Range: -24~0
Default Value: -18

Qqualmi BSC691 ADD WRFD- Intra Meaning: The minimum required quality threshold
n 0 UCELL 010801 RNC corresponding to CPICH Ec/No. When the measured
SELRE WRFD- Cell CPICH Ec/No is larger than the value of this
SEL 010802 Update parameter, the cell meets the S criteria of quality level
MOD Inter for cell selection/reselection. The RNC decides
UCELL RNC whether the UE can camp on the cell according to the
SELRE Cell cell selection/reselection criteria. For details about this
SEL Update parameter, see 3GPP TS 25.304.
GUI Value Range: -24~0
Unit: dB
Actual Value Range: -24~0
Default Value: -18

Qhyst1s BSC690 ADD WRFD- Intra Meaning: Measurement hysteresis 1 of a UE in the


pch 0 UCELL 010901 RNC CELL_PCH or URA_PCH state. This parameter is not
SELRE WRFD- URA used when its value is 255. For details about this
SEL 010801 Update parameter, see 3GPP TS 25.304.
MOD WRFD- Intra GUI Value Range: 0~40;255
UCELL 010802 RNC Unit: dB
SELRE Cell
SEL WRFD- Update Actual Value Range: 0~40, 255
010902 Default Value: 255
Inter
RNC
Cell
Update
Inter
RNC
URA
Update

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 41


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Qhyst1s BSC691 ADD WRFD- Intra Meaning: Measurement hysteresis 1 of a UE in the


pch 0 UCELL 010901 RNC CELL_PCH or URA_PCH state. This parameter is not
SELRE WRFD- URA used when its value is 255. For details about this
SEL 010801 Update parameter, see 3GPP TS 25.304.
MOD WRFD- Intra GUI Value Range: 0~40;255
UCELL 010802 RNC Unit: dB
SELRE Cell
SEL WRFD- Update Actual Value Range: 0~40, 255
010902 Default Value: 255
Inter
RNC
Cell
Update
Inter
RNC
URA
Update

Qhyst1s BSC690 ADD WRFD- Intra Meaning: Measurement hysteresis 1 of a UE in the


fach 0 UCELL 010801 RNC CELL_FACH state. This parameter is not used when
SELRE WRFD- Cell its value is 255. For details about this parameter, see
SEL 010802 Update 3GPP TS 25.304.
MOD Inter GUI Value Range: 0~40;255
UCELL RNC Unit: dB
SELRE Cell
SEL Update Actual Value Range: 0~40, 255
Default Value: 255

Qhyst1s BSC691 ADD WRFD- Intra Meaning: Measurement hysteresis 1 of a UE in the


fach 0 UCELL 010801 RNC CELL_FACH state. This parameter is not used when
SELRE WRFD- Cell its value is 255. For details about this parameter, see
SEL 010802 Update 3GPP TS 25.304.
MOD Inter GUI Value Range: 0~40;255
UCELL RNC Unit: dB
SELRE Cell
SEL Update Actual Value Range: 0~40, 255
Default Value: 255

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 42


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Qhyst2s BSC690 ADD WRFD- Intra Meaning: Measurement hysteresis 2 of a UE in the


pch 0 UCELL 010901 RNC CELL_PCH or URA_PCH state. When this parameter
SELRE WRFD- URA is set to 255, the value of "Qhyst1spch" is used. For
SEL 010801 Update details about this parameter, see 3GPP TS 25.304.
MOD WRFD- Intra GUI Value Range: 0~40;255
UCELL 010802 RNC Unit: dB
SELRE Cell
SEL WRFD- Update Actual Value Range: 0~40, 255
010902 Default Value: 255
Inter
RNC
Cell
Update
Inter
RNC
URA
Update

Qhyst2s BSC691 ADD WRFD- Intra Meaning: Measurement hysteresis 2 of a UE in the


pch 0 UCELL 010901 RNC CELL_PCH or URA_PCH state. When this parameter
SELRE WRFD- URA is set to 255, the value of "Qhyst1spch" is used. For
SEL 010801 Update details about this parameter, see 3GPP TS 25.304.
MOD WRFD- Intra GUI Value Range: 0~40;255
UCELL 010802 RNC Unit: dB
SELRE Cell
SEL WRFD- Update Actual Value Range: 0~40, 255
010902 Default Value: 255
Inter
RNC
Cell
Update
Inter
RNC
URA
Update

Qhyst2s BSC690 ADD WRFD- Intra Meaning: Measurement hysteresis 2 of a UE in the


fach 0 UCELL 010801 RNC CELL_FACH state. When this parameter is set to 255,
SELRE WRFD- Cell the value of "Qhyst1spch" is used. For details about
SEL 010802 Update this parameter, see 3GPP TS 25.304.
MOD Inter GUI Value Range: 0~40;255
UCELL RNC Unit: dB
SELRE Cell
SEL Update Actual Value Range: 0~40, 255
Default Value: 255

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 43


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Qhyst2s BSC691 ADD WRFD- Intra Meaning: Measurement hysteresis 2 of a UE in the


fach 0 UCELL 010801 RNC CELL_FACH state. When this parameter is set to 255,
SELRE WRFD- Cell the value of "Qhyst1spch" is used. For details about
SEL 010802 Update this parameter, see 3GPP TS 25.304.
MOD Inter GUI Value Range: 0~40;255
UCELL RNC Unit: dB
SELRE Cell
SEL Update Actual Value Range: 0~40, 255
Default Value: 255

Treselec BSC690 ADD WRFD- Intra Meaning: Reselection delay of a UE in the


tionspch 0 UCELL 010801 RNC CELL_PCH or URA_PCH state. This parameter is not
SELRE WRFD- Cell used when its value is 255. For details about this
SEL 010802 Update parameter, see 3GPP TS 25.304.
MOD Inter GUI Value Range: 0~31;255
UCELL RNC Unit: s
SELRE Cell
SEL Update Actual Value Range: 0~31, 255
Default Value: 255

Treselec BSC691 ADD WRFD- Intra Meaning: Reselection delay of a UE in the


tionspch 0 UCELL 010801 RNC CELL_PCH or URA_PCH state. This parameter is not
SELRE WRFD- Cell used when its value is 255. For details about this
SEL 010802 Update parameter, see 3GPP TS 25.304.
MOD Inter GUI Value Range: 0~31;255
UCELL RNC Unit: s
SELRE Cell
SEL Update Actual Value Range: 0~31, 255
Default Value: 255

Treselec BSC690 ADD WRFD- Intra Meaning: Reselection delay of a UE in the


tionsfac 0 UCELL 010801 RNC CELL_FACH state. This parameter is not used when
h SELRE WRFD- Cell its value is 255. For details about this parameter, see
SEL 010802 Update 3GPP TS 25.304.
MOD Inter GUI Value Range: 0~31;255
UCELL RNC Unit: 0.2s
SELRE Cell
SEL Update Actual Value Range: 0~6.2, 255
Default Value: 255

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 44


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Treselec BSC691 ADD WRFD- Intra Meaning: Reselection delay of a UE in the


tionsfac 0 UCELL 010801 RNC CELL_FACH state. This parameter is not used when
h SELRE WRFD- Cell its value is 255. For details about this parameter, see
SEL 010802 Update 3GPP TS 25.304.
MOD Inter GUI Value Range: 0~31;255
UCELL RNC Unit: 0.2s
SELRE Cell
SEL Update Actual Value Range: 0~6.2, 255
Default Value: 255

T313 BSC690 SET WRFD- 3GPP Meaning: Timer 313. T313 starts when a UE detects
0 UCONN 010101 R9 N313 successive "out of sync" indications from Layer
MODET WRFD- Specific 1 and stops when the UE detects N315 successive "in
IMER 140103 ations sync" indications form Layer 1. When T313 expires,
Call the radio link setup fails. The protocol-defined default
WRFD- value is 3. The value of this parameter is contained in
010802 Reestabl
ishment SIB1 messages.
WRFD- GUI Value Range: 0~15
010801 Inter
RNC Unit: s
Cell Actual Value Range: 0~15
Update
Default Value: 3
Intra
RNC
Cell
Update

T313 BSC691 SET WRFD- 3GPP Meaning: Timer 313. T313 starts when a UE detects
0 UCONN 010101 R9 N313 successive "out of sync" indications from Layer
MODET WRFD- Specific 1 and stops when the UE detects N315 successive "in
IMER 140103 ations sync" indications form Layer 1. When T313 expires,
Call the radio link setup fails. The protocol-defined default
WRFD- value is 3. The value of this parameter is contained in
010802 Reestabl
ishment SIB1 messages.
WRFD- GUI Value Range: 0~15
010801 Inter
RNC Unit: s
Cell Actual Value Range: 0~15
Update
Default Value: 3
Intra
RNC
Cell
Update

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 45


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

N313 BSC690 SET WRFD- 3GPP Meaning: Maximum number of successive "out of
0 UCONN 010101 R9 sync" indications received from Layer 1. The
MODET WRFD- Specific protocol-defined default value is 20. The value of this
IMER 140103 ations parameter is contained in SIB1 messages.
WRFD- Call GUI Value Range: D1, D2, D4, D10, D20, D50,
010802 Reestabl D100, D200
ishment Unit: None
WRFD-
010801 Inter Actual Value Range: 1, 2, 4, 10, 20, 50, 100, 200
RNC
Cell Default Value: D50
Update
Intra
RNC
Cell
Update

N313 BSC691 SET WRFD- 3GPP Meaning: Maximum number of successive "out of
0 UCONN 010101 R9 sync" indications received from Layer 1. The
MODET WRFD- Specific protocol-defined default value is 20. The value of this
IMER 140103 ations parameter is contained in SIB1 messages.
WRFD- Call GUI Value Range: D1, D2, D4, D10, D20, D50,
010802 Reestabl D100, D200
ishment Unit: None
WRFD-
010801 Inter Actual Value Range: 1, 2, 4, 10, 20, 50, 100, 200
RNC
Cell Default Value: D50
Update
Intra
RNC
Cell
Update

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 46


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

N315 BSC690 SET WRFD- 3GPP Meaning: Maximum number of successive "in sync"
0 UCONN 010101 R9 indications received from Layer 1 after T313 starts.
MODET WRFD- Specific The protocol-defined default value is 1. The value of
IMER 140103 ations this parameter is contained in SIB1 messages.
WRFD- Call GUI Value Range: D1, D2, D4, D10, D20, D50,
010802 Reestabl D100, D200, D400, D600, D800, D1000
ishment Unit: None
WRFD-
010801 Inter Actual Value Range: 1, 2, 4, 10, 20, 50, 100, 200, 400,
RNC 600, 800, 1000
Cell
Update Default Value: D1

Intra
RNC
Cell
Update

N315 BSC691 SET WRFD- 3GPP Meaning: Maximum number of successive "in sync"
0 UCONN 010101 R9 indications received from Layer 1 after T313 starts.
MODET WRFD- Specific The protocol-defined default value is 1. The value of
IMER 140103 ations this parameter is contained in SIB1 messages.
WRFD- Call GUI Value Range: D1, D2, D4, D10, D20, D50,
010802 Reestabl D100, D200, D400, D600, D800, D1000
ishment Unit: None
WRFD-
010801 Inter Actual Value Range: 1, 2, 4, 10, 20, 50, 100, 200, 400,
RNC 600, 800, 1000
Cell
Update Default Value: D1

Intra
RNC
Cell
Update

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 47


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Optimiz BSC690 SET WRFD- Inter Meaning:


ationSwi 0 URRCT 020203 RNC 1)DRNC_DCH_RCV_CELL_RESEL_MSG_DSCR_
tch2 RLSWI WRFD- Soft SWITCH
TCH 020303 Handov
er 1: This switch is turned on. Upon receiving a cell
WRFD- update message from a UE in the CELL_DCH state,
010510 Inter-
the DRNC releases the RRC connection with the
RAT
WRFD- cause value "directed signaling connection re-
Handov
020309 establishment".
er Based
WRFD- on 0: This switch is turned off. Upon receiving a cell
010801 Coverag update message from a UE in the CELL_DCH state,
WRFD- e the DRNC performs the migration procedure.
0106150 3.4/6.8/1 2)MULTIRAB_ATTESTAB_DEF_SWITCH(Optimiz
2 3.6/27.2 e the Measurement of MultiRAB Setup Attempts)
WRFD- Kbps Whether to modify the method for measuring the
0106150 RRC VS.MultiRAB.AttEstab.CSPS and
3 Connect VS.MultiRAB.AttEstab.PSPS counters.
ion and
WRFD- 1: This switch is set to on. These counters' measuring
Radio
010802 methods are optimized so that these two counters also
Access
WRFD- Bearer include the number of failed multi-RAB setups.
0106150 Establis 0: This switch is set to off. These counters' measuring
1 hment methods remain unchanged.
WRFD- and
3)PCH_UE_SRB_RESET_DSCR_SWITCH
020304 Release
Inter- Whether the RNC releases a UE's RRC connection
WRFD- with the cause value "directed signaling connection
020302 RAT
Handov re-establishment" upon receiving a CELL UPDATE
WRFD- message where the value of the "am-RLC-
er Based
0106150 ErrorIndicationRb2-3or4" IE is TRUE from the UE in
on DL
4 the CELL_PCH or URA_PCH state.
QoS
WRFD- 1: This switch is turned on. The RNC releases such a
Intra
0106150 UE's RRC connection with the cause value "directed
RNC
5 signaling connection re-establishment" in the
Cell
Update preceding scenario to enable the UE to re-access the
network as soon as possible.
Combin
ation of 0: This switch is turned off. The RNC initiates an
One CS abnormal RRC release process in the preceding
Service scenario.
and Two 4)DRNC_CELL_CODE_CONFLICT_OPT_SWITC
PS H
Services
Whether to perform the time offset compensation for
Combin the activation timer after the DRNC sends an RNSAP
ation of RL RECFG COMMIT message to the NodeB.
Three
PS 1: This switch is turned on. The DRNC performs the
Services time offset compensation for the activation timer.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 48


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Inter 0: This switch is turned off. The DRNC does not


RNC performs the time offset compensation for the
Cell activation timer.
Update 5)RAB_FAIL_CAUSE_SWITCH
Combin Whether to change the cause value "Request
ation of information not available" in a RAB ASSIGNMENT
Two PS FAILURE message.
Services
1: This switch is turned on. The cause value "Request
Inter information not available" is changed. When a cell-
Frequen resource-related UE admission failure occurs due to a
cy Hard request procedure error, Non-Iub-bandwidth
Handov congestion error, or compressed mode configuration
er Based failure, the cause value "Request information not
on DL available" in a RAB ASSIGNMENT FAILURE
QoS message is changed to "Unspecified Failure." In other
Inter cases, the cause value "Request information not
Frequen available" is changed to "No Radio Resources
cy Hard Available in Target cell."
Handov 0: This switch is turned off. The cause value is
er Based unchanged.
on 6)PSPS_SETUP_REL_DEF_SWITCH
Coverag
e Whether to optimize calculations for counters related
to combined PS services.
Combin
ation of 1: This switch is turned on. When x PS services are in
One CS progress, the recorded number of RAB assignment
Service attempts and the recorded number of RAB
and assignments will be x minus 1. In addition, when these
Three services are normally or abnormally released at the
PS same time, the recorded number will be x minus 1.
Services 0: This switch is turned off. When x (x = 2, 3, or 4) PS
services are in progress, the recorded number of RAB
Combin
assignment attempts and the recorded number of
ation of
successful RAB assignments will be x. In addition,
Four PS
when these services are normally or abnormally
Services
released at the same time, the recorded number will be
x.
7)RRC_CON_REQ_TIMES_COMPATIBLE_SWITC
H
Whether the RNC keeps the number of repeatedly
transmitted RRC CONNECTION REQUEST
messages below the value of the N300 parameter in
the SET UIDLEMODETIMER command.
1: This switch is turned on. The RNC does not keep
the number of repeatedly transmitted RRC
CONNECTION REQUEST messages below the value
of N300.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 49


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. The RNC keeps the


number of repeatedly transmitted RRC
CONNECTION REQUEST messages below the value
of N300.
8)SECU_CU_CROSS_SWITCH
Whether the RNC sends a SECURITY MODE
REJECT message to the CN when a cell update
procedure is initiated during a security mode control
procedure.
1: This switch is turned on. The RNC continues with
the security mode control procedure after processing
the CELL UPDATE message.
0: This switch is turned off. The RNC sends a
SECURITY MODE REJECT message to the CN
before processing the CELL UPDATE message.
9)HHO_CNT_CORRECT_SWITCH
Whether the RNC measures the following counters
during outgoing inter-RNC intra-band hard handovers:
VS.HHO.AttMultiBandOut.PS,
VS.HHO.AttMultiBandOut.CS,
VS.HHO.SuccMultiBandOut.PS, and
VS.HHO.SuccMultiBandOut.CS.
1: This switch is turned on. The RNC does not
measure the preceding performance counters during
outgoing inter-RNC intra-band hard handovers.
0: This switch is turned off. The RNC measures the
preceding performance counters during outgoing
inter-RNC intra-band hard handovers.
10)IRATHO_CNT_CORRECT_SWITCH
Whether the RNC measures the
VS.IRATHO.FailOutPS.UEGen and
VS.IRATHO.FailOutPS.Abort counters in Directed
Signaling Connection Re-establishment (DSCR)
scenarios. The two counters are related to inter-RAT
handovers.
1: This switch is turned on. The RNC does not
measure the performance counters in DSCR scenarios.
0: This switch is turned off. The RNC measures the
performance counters in DSCR scenarios.
11)RB_CU_CROSS_COMPATIBLE_SWITCH
In the CELL_FACH state, if a cell update procedure is
initiated during a service establishment procedure, the
cause value of the cell update reported by the UE is
cell reselection and the CELL UPDATE message sent

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 50


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

by the UE contains the information element (IE)


Reconfiguration Status Indicator. In addition, the
CELL UPDATE CONFIRM message sent by the RNC
contains "Physical channel information elements."
According to 3GPP technical specifications, the UE
encounters incompatible simultaneous reconfiguration
if the RNC sends "Physical channel information
elements" to the UE before receiving an RB SETUP
COMPLETE message from the UE. As a result, the
RNC fails to complete the cell update procedure and
service establishment fails. This parameter specifies
whether the RNC contains "Physical channel
information elements" in a CELL UPDATE
CONFIRM message when a UE sends a CELL
UPDATE message with the Reconfiguration Status
Indicator IE in the preceding scenario.
1: This switch is turned on. The RNC does not contain
the Physical channel information elements in the
CELL UPDATE CONFIRM message.
0: This switch is turned off. This switch is turned off.
The RNC contains the Physical channel information
elements in the CELL UPDATE CONFIRM message.
12)RNTI_ENH_ALLOC_AlGO_SWITCH
Whether to enable the enhanced RNTI allocation
algorithm. This switch is turned off by default.
1: This switch is turned on. The number segment for
the RNTI may be limited. This causes the UE access
success rate to decrease.
0: This switch is turned off. One RNTI may be
allocated to two different UEs, leading to RNTI
conflicts. This causes the call drop rate to increase.
13)DRNC_LOAD_CTRL_SWITCH
Whether to enable load sharing for the combined
incoming inter-Iur handovers procedure. This switch
is turned on by default.
1: This switch is turned on. During a combined
incoming inter-Iur handover procedure, the signaling
and SCCP are processed by the same signaling
subsystem, and load sharing is implemented between
signaling subsystems.
0: This switch is turned off. During a combined
incoming inter-Iur handover procedure, the signaling
is processed by the signaling subsystem that carries
the serving cell.
14)EFACH_CU_COMMON_HRNTI_SWITCH

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 51


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RNC sends a CELL UPDATE


CONFIRM message on the common HS-DSCH Radio
Network temporary identity (H-RNTI) and includes a
C-RNTI and H-RNTI in this message after receiving a
CELL UPDATE message with the cause value "re-
entering service area" or "RLC unrecoverable error"
from a UE when the E-FACH feature has been
enabled.
1: This switch is turned on. The RNC sends the CELL
UPDATE CONFIRM message on the common H-
RNTI and includes the C-RNTI and H-RNTI after
receiving a CELL UPDATE message with the cause
value "re-entering service area" or "RLC
unrecoverable error."
0: This switch is turned off. The RNC sends the CELL
UPDATE CONFIRM message on the dedicated H-
RNTI and does not include the C-RNTI and H-RNTI
in the message after receiving the CELL UPDATE
message with the cause value "re-entering service
area" or "RLC unrecoverable error."
15)PSCS_CALLDROP_FIX_SWITCH
Whether to add the missed measurement scenarios to
the call drop rate specific to CS+PS combined
services. This switch is turned on by default.
1: The switch is turned on. In this case, the missed
measurement scenarios of the call drop rate specific to
CS+PS combined services will be added.
0: The switch is turned off. In this case, the missed
measurement scenarios of the call drop rate specific to
CS+PS combined services will not be added.
16)CSABNREL_DUETO_PSREL_FIX_SWITCH
Whether to add the missed measurement scenarios to
the counter providing the number of abnormally
released CS services due to released PS services. This
switch is turned on by default.
1: The switch is turned on. In this case, the missed
measurement scenarios of the counter providing the
number of abnormally released CS services due to
released PS services will be added. This improves the
call drop rate specific to CS+PS combined services.
0: The switch is turned off. In this case, the missed
measurement scenarios of the counter providing the
number of abnormally released CS services due to
released PS services will not be added.
GUI Value Range:
DRNC_DCH_RCV_CELL_RESEL_MSG_DSCR_S

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 52


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

WITCH, MULTIRAB_ATTESTAB_DEF_SWITCH,
PCH_UE_SRB_RESET_DSCR_SWITCH,
DRNC_CELL_CODE_CONFLICT_OPT_SWITCH,
RAB_FAIL_CAUSE_SWITCH,
PSPS_SETUP_REL_DEF_SWITCH,
RRC_CON_REQ_TIMES_COMPATIBLE_SWITCH,
SECU_CU_CROSS_SWITCH,
HHO_CNT_CORRECT_SWITCH,
IRATHO_CNT_CORRECT_SWITCH,
RB_CU_CROSS_COMPATIBLE_SWITCH,
RNTI_ENH_ALLOC_AlGO_SWITCH,
DRNC_LOAD_CTRL_SWITCH,
EFACH_CU_COMMON_HRNTI_SWITCH,
PSCS_CALLDROP_FIX_SWITCH,
CSABNREL_DUETO_PSREL_FIX_SWITCH
Unit: None
Actual Value Range:
DRNC_DCH_RCV_CELL_RESEL_MSG_DSCR_S
WITCH,
MULTIRAB_ATTESTAB_DEF_SWITCH,
PCH_UE_SRB_RESET_DSCR_SWITCH,
DRNC_CELL_CODE_CONFLICT_OPT_SWITCH,
RAB_FAIL_CAUSE_SWITCH,
PSPS_SETUP_REL_DEF_SWITCH,
RRC_CON_REQ_TIMES_COMPATIBLE_SWITCH,
SECU_CU_CROSS_SWITCH,
HHO_CNT_CORRECT_SWITCH,
IRATHO_CNT_CORRECT_SWITCH,
RB_CU_CROSS_COMPATIBLE_SWITCH,
RNTI_ENH_ALLOC_AlGO_SWITCH,
DRNC_LOAD_CTRL_SWITCH,
EFACH_CU_COMMON_HRNTI_SWITCH,
PSCS_CALLDROP_FIX_SWITCH,
CSABNREL_DUETO_PSREL_FIX_SWITCH
Default Value:
DRNC_DCH_RCV_CELL_RESEL_MSG_DSCR_S
WITCH:0,MULTIRAB_ATTESTAB_DEF_SWITCH:
0,PCH_UE_SRB_RESET_DSCR_SWITCH:
0,DRNC_CELL_CODE_CONFLICT_OPT_SWITCH
:0,RAB_FAIL_CAUSE_SWITCH:
0,PSPS_SETUP_REL_DEF_SWITCH:
0,RRC_CON_REQ_TIMES_COMPATIBLE_SWITC
H:0,SECU_CU_CROSS_SWITCH:

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 53


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd
0,HHO_CNT_CORRECT_SWITCH:
0,IRATHO_CNT_CORRECT_SWITCH:
0,RB_CU_CROSS_COMPATIBLE_SWITCH:
0,RNTI_ENH_ALLOC_AlGO_SWITCH:
0,DRNC_LOAD_CTRL_SWITCH:
1,EFACH_CU_COMMON_HRNTI_SWITCH:
1,PSCS_CALLDROP_FIX_SWITCH:
1,CSABNREL_DUETO_PSREL_FIX_SWITCH:1

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 54


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Optimiz BSC691 SET WRFD- Inter Meaning:


ationSwi 0 URRCT 020203 RNC 1)DRNC_DCH_RCV_CELL_RESEL_MSG_DSCR_
tch2 RLSWI WRFD- Soft SWITCH
TCH 020303 Handov
er 1: This switch is turned on. Upon receiving a cell
WRFD- update message from a UE in the CELL_DCH state,
010510 Inter-
the DRNC releases the RRC connection with the
RAT
WRFD- cause value "directed signaling connection re-
Handov
020309 establishment".
er Based
WRFD- on 0: This switch is turned off. Upon receiving a cell
010801 Coverag update message from a UE in the CELL_DCH state,
WRFD- e the DRNC performs the migration procedure.
0106150 3.4/6.8/1 2)MULTIRAB_ATTESTAB_DEF_SWITCH(Optimiz
2 3.6/27.2 e the Measurement of MultiRAB Setup Attempts)
WRFD- Kbps Whether to modify the method for measuring the
0106150 RRC VS.MultiRAB.AttEstab.CSPS and
3 Connect VS.MultiRAB.AttEstab.PSPS counters.
ion and
WRFD- 1: This switch is set to on. These counters' measuring
Radio
010802 methods are optimized so that these two counters also
Access
WRFD- Bearer include the number of failed multi-RAB setups.
0106150 Establis 0: This switch is set to off. These counters' measuring
1 hment methods remain unchanged.
WRFD- and
3)PCH_UE_SRB_RESET_DSCR_SWITCH
020304 Release
Inter- Whether the RNC releases a UE's RRC connection
WRFD- with the cause value "directed signaling connection
020302 RAT
Handov re-establishment" upon receiving a CELL UPDATE
WRFD- message where the value of the "am-RLC-
er Based
0106150 ErrorIndicationRb2-3or4" IE is TRUE from the UE in
on DL
4 the CELL_PCH or URA_PCH state.
QoS
WRFD- 1: This switch is turned on. The RNC releases such a
Intra
0106150 UE's RRC connection with the cause value "directed
RNC
5 signaling connection re-establishment" in the
Cell
Update preceding scenario to enable the UE to re-access the
network as soon as possible.
Combin
ation of 0: This switch is turned off. The RNC initiates an
One CS abnormal RRC release process in the preceding
Service scenario.
and Two 4)DRNC_CELL_CODE_CONFLICT_OPT_SWITC
PS H
Services
Whether to perform the time offset compensation for
Combin the activation timer after the DRNC sends an RNSAP
ation of RL RECFG COMMIT message to the NodeB.
Three
PS 1: This switch is turned on. The DRNC performs the
Services time offset compensation for the activation timer.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 55


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Inter 0: This switch is turned off. The DRNC does not


RNC performs the time offset compensation for the
Cell activation timer.
Update 5)RAB_FAIL_CAUSE_SWITCH
Combin Whether to change the cause value "Request
ation of information not available" in a RAB ASSIGNMENT
Two PS FAILURE message.
Services
1: This switch is turned on. The cause value "Request
Inter information not available" is changed. When a cell-
Frequen resource-related UE admission failure occurs due to a
cy Hard request procedure error, Non-Iub-bandwidth
Handov congestion error, or compressed mode configuration
er Based failure, the cause value "Request information not
on DL available" in a RAB ASSIGNMENT FAILURE
QoS message is changed to "Unspecified Failure." In other
Inter cases, the cause value "Request information not
Frequen available" is changed to "No Radio Resources
cy Hard Available in Target cell."
Handov 0: This switch is turned off. The cause value is
er Based unchanged.
on 6)PSPS_SETUP_REL_DEF_SWITCH
Coverag
e Whether to optimize calculations for counters related
to combined PS services.
Combin
ation of 1: This switch is turned on. When x PS services are in
One CS progress, the recorded number of RAB assignment
Service attempts and the recorded number of RAB
and assignments will be x minus 1. In addition, when these
Three services are normally or abnormally released at the
PS same time, the recorded number will be x minus 1.
Services 0: This switch is turned off. When x (x = 2, 3, or 4) PS
services are in progress, the recorded number of RAB
Combin
assignment attempts and the recorded number of
ation of
successful RAB assignments will be x. In addition,
Four PS
when these services are normally or abnormally
Services
released at the same time, the recorded number will be
x.
7)RRC_CON_REQ_TIMES_COMPATIBLE_SWITC
H
Whether the RNC keeps the number of repeatedly
transmitted RRC CONNECTION REQUEST
messages below the value of the N300 parameter in
the SET UIDLEMODETIMER command.
1: This switch is turned on. The RNC does not keep
the number of repeatedly transmitted RRC
CONNECTION REQUEST messages below the value
of N300.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 56


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. The RNC keeps the


number of repeatedly transmitted RRC
CONNECTION REQUEST messages below the value
of N300.
8)SECU_CU_CROSS_SWITCH
Whether the RNC sends a SECURITY MODE
REJECT message to the CN when a cell update
procedure is initiated during a security mode control
procedure.
1: This switch is turned on. The RNC continues with
the security mode control procedure after processing
the CELL UPDATE message.
0: This switch is turned off. The RNC sends a
SECURITY MODE REJECT message to the CN
before processing the CELL UPDATE message.
9)HHO_CNT_CORRECT_SWITCH
Whether the RNC measures the following counters
during outgoing inter-RNC intra-band hard handovers:
VS.HHO.AttMultiBandOut.PS,
VS.HHO.AttMultiBandOut.CS,
VS.HHO.SuccMultiBandOut.PS, and
VS.HHO.SuccMultiBandOut.CS.
1: This switch is turned on. The RNC does not
measure the preceding performance counters during
outgoing inter-RNC intra-band hard handovers.
0: This switch is turned off. The RNC measures the
preceding performance counters during outgoing
inter-RNC intra-band hard handovers.
10)IRATHO_CNT_CORRECT_SWITCH
Whether the RNC measures the
VS.IRATHO.FailOutPS.UEGen and
VS.IRATHO.FailOutPS.Abort counters in Directed
Signaling Connection Re-establishment (DSCR)
scenarios. The two counters are related to inter-RAT
handovers.
1: This switch is turned on. The RNC does not
measure the performance counters in DSCR scenarios.
0: This switch is turned off. The RNC measures the
performance counters in DSCR scenarios.
11)RB_CU_CROSS_COMPATIBLE_SWITCH
In the CELL_FACH state, if a cell update procedure is
initiated during a service establishment procedure, the
cause value of the cell update reported by the UE is
cell reselection and the CELL UPDATE message sent

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 57


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

by the UE contains the information element (IE)


Reconfiguration Status Indicator. In addition, the
CELL UPDATE CONFIRM message sent by the RNC
contains "Physical channel information elements."
According to 3GPP technical specifications, the UE
encounters incompatible simultaneous reconfiguration
if the RNC sends "Physical channel information
elements" to the UE before receiving an RB SETUP
COMPLETE message from the UE. As a result, the
RNC fails to complete the cell update procedure and
service establishment fails. This parameter specifies
whether the RNC contains "Physical channel
information elements" in a CELL UPDATE
CONFIRM message when a UE sends a CELL
UPDATE message with the Reconfiguration Status
Indicator IE in the preceding scenario.
1: This switch is turned on. The RNC does not contain
the Physical channel information elements in the
CELL UPDATE CONFIRM message.
0: This switch is turned off. This switch is turned off.
The RNC contains the Physical channel information
elements in the CELL UPDATE CONFIRM message.
12)RNTI_ENH_ALLOC_AlGO_SWITCH
Whether to enable the enhanced RNTI allocation
algorithm. This switch is turned off by default.
1: This switch is turned on. The number segment for
the RNTI may be limited. This causes the UE access
success rate to decrease.
0: This switch is turned off. One RNTI may be
allocated to two different UEs, leading to RNTI
conflicts. This causes the call drop rate to increase.
13)DRNC_LOAD_CTRL_SWITCH
Whether to enable load sharing for the combined
incoming inter-Iur handovers procedure. This switch
is turned on by default.
1: This switch is turned on. During a combined
incoming inter-Iur handover procedure, the signaling
and SCCP are processed by the same signaling
subsystem, and load sharing is implemented between
signaling subsystems.
0: This switch is turned off. During a combined
incoming inter-Iur handover procedure, the signaling
is processed by the signaling subsystem that carries
the serving cell.
14)EFACH_CU_COMMON_HRNTI_SWITCH

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 58


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RNC sends a CELL UPDATE


CONFIRM message on the common HS-DSCH Radio
Network temporary identity (H-RNTI) and includes a
C-RNTI and H-RNTI in this message after receiving a
CELL UPDATE message with the cause value "re-
entering service area" or "RLC unrecoverable error"
from a UE when the E-FACH feature has been
enabled.
1: This switch is turned on. The RNC sends the CELL
UPDATE CONFIRM message on the common H-
RNTI and includes the C-RNTI and H-RNTI after
receiving a CELL UPDATE message with the cause
value "re-entering service area" or "RLC
unrecoverable error."
0: This switch is turned off. The RNC sends the CELL
UPDATE CONFIRM message on the dedicated H-
RNTI and does not include the C-RNTI and H-RNTI
in the message after receiving the CELL UPDATE
message with the cause value "re-entering service
area" or "RLC unrecoverable error."
15)PSCS_CALLDROP_FIX_SWITCH
Whether to add the missed measurement scenarios to
the call drop rate specific to CS+PS combined
services. This switch is turned on by default.
1: The switch is turned on. In this case, the missed
measurement scenarios of the call drop rate specific to
CS+PS combined services will be added.
0: The switch is turned off. In this case, the missed
measurement scenarios of the call drop rate specific to
CS+PS combined services will not be added.
16)CSABNREL_DUETO_PSREL_FIX_SWITCH
Whether to add the missed measurement scenarios to
the counter providing the number of abnormally
released CS services due to released PS services. This
switch is turned on by default.
1: The switch is turned on. In this case, the missed
measurement scenarios of the counter providing the
number of abnormally released CS services due to
released PS services will be added. This improves the
call drop rate specific to CS+PS combined services.
0: The switch is turned off. In this case, the missed
measurement scenarios of the counter providing the
number of abnormally released CS services due to
released PS services will not be added.
GUI Value Range:
DRNC_DCH_RCV_CELL_RESEL_MSG_DSCR_S

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 59


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

WITCH, MULTIRAB_ATTESTAB_DEF_SWITCH,
PCH_UE_SRB_RESET_DSCR_SWITCH,
DRNC_CELL_CODE_CONFLICT_OPT_SWITCH,
RAB_FAIL_CAUSE_SWITCH,
PSPS_SETUP_REL_DEF_SWITCH,
RRC_CON_REQ_TIMES_COMPATIBLE_SWITCH,
SECU_CU_CROSS_SWITCH,
HHO_CNT_CORRECT_SWITCH,
IRATHO_CNT_CORRECT_SWITCH,
RB_CU_CROSS_COMPATIBLE_SWITCH,
RNTI_ENH_ALLOC_AlGO_SWITCH,
DRNC_LOAD_CTRL_SWITCH,
EFACH_CU_COMMON_HRNTI_SWITCH,
PSCS_CALLDROP_FIX_SWITCH,
CSABNREL_DUETO_PSREL_FIX_SWITCH
Unit: None
Actual Value Range:
DRNC_DCH_RCV_CELL_RESEL_MSG_DSCR_S
WITCH,
MULTIRAB_ATTESTAB_DEF_SWITCH,
PCH_UE_SRB_RESET_DSCR_SWITCH,
DRNC_CELL_CODE_CONFLICT_OPT_SWITCH,
RAB_FAIL_CAUSE_SWITCH,
PSPS_SETUP_REL_DEF_SWITCH,
RRC_CON_REQ_TIMES_COMPATIBLE_SWITCH,
SECU_CU_CROSS_SWITCH,
HHO_CNT_CORRECT_SWITCH,
IRATHO_CNT_CORRECT_SWITCH,
RB_CU_CROSS_COMPATIBLE_SWITCH,
RNTI_ENH_ALLOC_AlGO_SWITCH,
DRNC_LOAD_CTRL_SWITCH,
EFACH_CU_COMMON_HRNTI_SWITCH,
PSCS_CALLDROP_FIX_SWITCH,
CSABNREL_DUETO_PSREL_FIX_SWITCH
Default Value:
DRNC_DCH_RCV_CELL_RESEL_MSG_DSCR_S
WITCH:0,MULTIRAB_ATTESTAB_DEF_SWITCH:
0,PCH_UE_SRB_RESET_DSCR_SWITCH:
0,DRNC_CELL_CODE_CONFLICT_OPT_SWITCH
:0,RAB_FAIL_CAUSE_SWITCH:
0,PSPS_SETUP_REL_DEF_SWITCH:
0,RRC_CON_REQ_TIMES_COMPATIBLE_SWITC
H:0,SECU_CU_CROSS_SWITCH:

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 60


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd
0,HHO_CNT_CORRECT_SWITCH:
0,IRATHO_CNT_CORRECT_SWITCH:
0,RB_CU_CROSS_COMPATIBLE_SWITCH:
0,RNTI_ENH_ALLOC_AlGO_SWITCH:
0,DRNC_LOAD_CTRL_SWITCH:
1,EFACH_CU_COMMON_HRNTI_SWITCH:
1,PSCS_CALLDROP_FIX_SWITCH:
1,CSABNREL_DUETO_PSREL_FIX_SWITCH:1

T316 BSC690 SET WRFD- 3GPP Meaning: Timer 316. T316 starts when a UE is in the
0 UCONN 010101 R9 URA_PCH or CELL_PCH state and detects "out of
MODET WRFD- Specific service area." T316 stops when the UE detects "in
IMER 010801 ations service area." When T316 expires, the UE initiates the
Intra cell update procedure if it detects "in service area." If
WRFD- the UE detects "out of service area" when T316
010802 RNC
Cell expires, the UE starts T317. Then, the UE will enter
WRFD- Update the CELL_FACH state and initiate cell update
010902 procedure when the UE detects "in service area." The
Inter protocol-defined default value is 30. The value of this
WRFD- RNC
010901 parameter is contained in SIB1 messages.
Cell
Update GUI Value Range: D0, D10, D20, D30, D40, D50,
INFINITY
Inter
RNC Unit: s
URA Actual Value Range: 0, 10, 20, 30, 40, 50, INFINITY
Update Default Value: D30
Intra
RNC
URA
Update

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 61


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

T316 BSC691 SET WRFD- 3GPP Meaning: Timer 316. T316 starts when a UE is in the
0 UCONN 010101 R9 URA_PCH or CELL_PCH state and detects "out of
MODET WRFD- Specific service area." T316 stops when the UE detects "in
IMER 010801 ations service area." When T316 expires, the UE initiates the
Intra cell update procedure if it detects "in service area." If
WRFD- the UE detects "out of service area" when T316
010802 RNC
Cell expires, the UE starts T317. Then, the UE will enter
WRFD- Update the CELL_FACH state and initiate cell update
010902 procedure when the UE detects "in service area." The
Inter protocol-defined default value is 30. The value of this
WRFD- RNC
010901 parameter is contained in SIB1 messages.
Cell
Update GUI Value Range: D0, D10, D20, D30, D40, D50,
INFINITY
Inter
RNC Unit: s
URA Actual Value Range: 0, 10, 20, 30, 40, 50, INFINITY
Update Default Value: D30
Intra
RNC
URA
Update

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 62


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

PROCE BSC690 SET WRFD- 3.4/6.8/1 Meaning:


SSSWIT 0 URRCT 010510 3.6/27.2 1) AMR_HHO_FAIL_ROLLBACK_SWITCH (HHO
CH4 RLSWI WRFD- Kbps Rollback Switch for 12.2k AMR-NB Services)
TCH 0106090 RRC
1: This switch is turned on. The RNC supports
2 Connect
rollback caused by failed hard handovers of 12.2k
ion and
WRFD- AMR-NB speech services. It is recommended that the
Radio
010101 timer T312 be set to 1 second (SET
Access
UCONNMODETIMER: T312=1;) before turning on
WRFD- Bearer
this switch. If the timer T312 is not set to 1 second,
140226 Establis
AMR noise will occur on some UEs. If the AMRC
WRFD- hment
feature is enabled, the RNC supports the hard
140103 and
handover failure rollback of only for 12.2 kbit/s
Release
WRFD- narrowband AMR services.
0204000 Combin
0: This switch is turned off. The RNC does not
2 ation of
support rollback caused by failed hard handovers of
One CS
WRFD- 12.2k AMR-NB speech services, leading to call drops.
Service
140205 and One 2) RRC_CONN_SETUP_OPT_SWITCH (RRC
WRFD- PS CONNECTION SETUP Message Optimization
020302 Service Switch)
WRFD- 3GPP Whether optimization of the RRC CONNECTION
020303 R9 SETUP message takes effect.
WRFD- Specific 1: This switch is turned on. Optimization of the RRC
020304 ations CONNECTION SETUP message takes effect. If the
Fast IE RLC info under SRB3 or SRB4 in the RRC
WRFD-
Return CONNECTION SETUP message contains the same
020305
from information as that under SRB2, the RNC replaces the
WRFD- UMTS IE RLC info under SRB3 or SRB4 with the IE same
020306 to LTE as RB:0x2(2) to shorten the length of the message.
Call 0: This switch is turned off. The RNC does not replace
Reestabl the IE RLC info under SRB3 or SRB4 in the RRC
ishment CONNECTION SETUP message.
Inter 3) PS_F2D_OVERLAP_CELLUPT_SWITCH
System (Switch for Simultaneous PS Service Setup F2D and
Direct Cell Update Procedures)
Retry Whether the RNC proceeds with PS RAB setup in a
Voice state transition from CELL_FACH to CELL_DCH if
Service the same UE reports a CELL UPDATE message with
Experie the cause value "cell reselection" during the PS RAB
nce setup.
Improve 1: This switch is turned on. The RNC rolls back the
ment for PS RAB setup procedure without sending a response
Weak message to the CN. The RNC proceeds with the RAB
Receptio assignment procedure after finishing the cell update
n Ues procedure.
Inter 0: This switch is turned off. The RNC rolls back the
Frequen PS RAB setup procedure and sends a RAB

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 63


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

cy Hard ASSIGNMENT RESPONSE message to the CN,


Handov which indicates a RAB assignment failure. The PS
er Based service setup fails.
on 4) TCP_ACK_ACCELERATOR_SWITCH (Switch
Coverag for Throughput Increase in the Case of Simultaneous
e Uplink and Downlink Transmissions)
Inter-
This switch is turned on to increase the total
RAT
throughput in the uplink and downlink only when
Handov
uplink and downlink HSPA data is transmitted
er Based
simultaneously. In other scenarios, you are advised to
on
turn off the switch.
Coverag
e 1: This switch is turned on. The function of increasing
the total throughput in the case of simultaneous uplink
Inter
and downlink transmissions takes effect.
Frequen
cy Hard 0: This switch is turned off. The function of increasing
Handov the total throughput in the case of simultaneous uplink
er Based and downlink transmissions does not take effect.
on DL 5) PHY_RECFG_REEST_SWITCH (Switch for RL
QoS Re-establishments During the Physical Channel
Inter- Reconfiguration)
RAT
1: This switch is turned on. When UE sends the RNC
Handov
a Cell Update message with the cause value "Radio
er Based
Link Failure", the RNC reestablishes the radio link for
on
the UE under the following conditions:
Service
The UE has not responded to the Physical Channel
Inter-
Reconfiguration message.
RAT
Handov The RNC detects interrupted downlink transmission
er Based on SRB2 or the NodeB reports that all radio links of
on Load the UE are out of synchronization.
0: This switch is turned off. The RNC does not
reestablish the radio link for the UE under the
preceding conditions.
6) IUR_RL_REEST_SWITCH (Iur RL
Reestablishment Switch)
1: This switch is turned on. The RNC deletes the
existing Iur radio links for the UE during the RNC
performing radio link reestablishment.
0: This switch is turned off. The RNC does not delete
the existing Iur radio links during the RNC
performing radio link reestablishment.
7) RB_SETUP_RL_REEST_SWITCH (Switch for
RL Reestablishment or Cell Update During an RB
Setup)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 64


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is turned on. When the RNC is waiting


for a UE's response during a radio bearer (RB) setup
CELL_DCH-to-CELL_DCH (D2D) procedure:
The RNC reestablishes a radio link (RL) for the UE if
the RNC detects a signaling radio bearer (SRB) reset
at layer 2 (L2) or all uplink RLs for the UE are out of
synchronization upon expiration of the RL Restore
timer.
The RNC performs a cell update if the RNC receives a
CELL UPDATE message with the cause value of RL
FAILURE, RLC UNRECOVERABLE ERROR, or
REENTERED SERVICE AREA.
0: This switch is turned off. When the RNC is waiting
for a UE's response during an RB setup D2D
procedure, the RNC does not perform an RL
reestablishment or cell update even if the trigger
conditions are met.
8)
RRC_CELLFACH_TRB_RESET_TO_F2D_SWITC
H (The CELL_FACH-to-CELL_DCH state (F2D)
transition switch by TRB reset)
When the RNC receives a TRB reset request from a
UE in the CELL_FACH state, the RNC cannot
respond to the UE with a confirm message if the
FACH is congested. The
RRC_CELLFACH_TRB_RESET_TO_F2D_SWITC
H parameter specifies whether a UE performs an F2D
transition if the number of TRB reset requests from
the UE to the RNC reaches a specified threshold.
1: This switch is turned on. The UE moves from the
CELL_FACH state to the CELL_DCH state.
0: This switch is turned off. The UE does not move
from the CELL_FACH state to the CELL_DCH state.
This function helps to reduce the number of call drops
caused by the RNC not responding to the TRB reset
requests during FACH congestion.
9) SEND_MSG_NULL_SWITCH (MM NULL
Message Switch)
Whether the RNC sends an MM NULL message to
the CS CN. If the switch
RNC_CS_QUERY_UE_IMEI_SWITCH under
PROCESSSWITCH2 in the SET URRCTRLSWITCH
command is turned on, testing the interworking
between the RNC and the CN is required. If the CN
needs to verify the serial number of direct transfer
messages, turn on this switch.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 65


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

The RNC rather than the CS CN sends an IDENTITY


REQUEST message to a UE to obtain its IMEI. Upon
receiving an IDENTITY RESPONSE message from
the UE:
1: This switch is turned on. The RNC sends an MM
NULL message to the CS CN.
0: This switch is turned off. The RNC does not send
an MM NULL message to the CS CN.
10)FD_PCH_IUR_CS_OPT_SWITCH
CS paging message processing switch for UEs in the
CELL_PCH or URA_PCH state that support fast
dormancy on the drift radio network controller
(DRNC) side.
1: This switch is turned on. The SRNC instructs these
UEs to move to the CELL_DCH state and to establish
CS services when these UEs receive a CS paging
message.
0: This switch is turned off. The SRNC releases the
connection of these UEs when these UEs receive a CS
paging message.
11)CELLUPT_T314_T315_TIMEOUT_OPT_SWITC
H
Whether the RNC releases the connection of a UE in a
state other than CELL_DCH when the T314/T315
timer in the cell update message received by the UE
expires.
1: This switch is turned on. The RNC continues with
the cell update processing when the T314/T315 timer
in the cell update message expires.
0: This switch is turned off. The RNC abnormally
releases the connection of the UE when the T314/
T315 timer in the cell update message expires.
12)
CS_HHO_ASYNC_CTRL_SWITCH(Asynchronous
Reconfigure Switch for CS HHO)
1: This switch is turned on. The RNC does not put the
activation time information element (IE) in the hard
handover configuration message for CS services.
After receiving the message, the UE immediately
activates the configuration.
0: This switch is turned off. The RNC puts the
activation time IE in the hard handover configuration
message for CS services. After receiving the message,
the UE activates the configuration at the specified
activation time.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 66


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

13)
PS_HHO_ASYNC_CTRL_SWITCH(Asynchronous
Reconfigure Switch for PS HHO)
1: This switch is turned on. The RNC does not put the
activation time information element (IE) in the hard
handover configuration message for PS services. After
receiving the message, the UE immediately activates
the configuration.
0: This switch is turned off. The RNC puts the
activation time IE in the hard handover configuration
message for PS services. After receiving the message,
the UE activates the configuration at the specified
activation time.
14)
IUR_HHO_ASYNC_CTRL_SWITCH(Asynchronous
Reconfigure Switch for Iur HHO)
1: This switch is turned on. The RNC does not put the
activation time information element (IE) in the hard
handover configuration message across the Iur
interface. After receiving the message, the UE
immediately activates the configuration.
0: This switch is turned off. The RNC puts the
activation time IE in the hard handover configuration
message across the Iur interface. After receiving the
message, the UE activates the configuration at the
specified activation time.
15) R8_UE_SEL_DPUE_SWITCH (Switch for
Preferentially Allocating DPUe Resources to UEs
That Comply with 3GPP Release 8 or Later)
1: This switch is turned on. The RNC preferentially
allocates DPUe resources in any subrack to UEs that
comply with 3GPP Release 8 or later.
0: This switch is turned off. The RNC preferentially
allocates DPU resources in the subrack that the UEs
access to UEs that comply with 3GPP Release 8 or
later. The RNC allocates DPU resources in other
subracks only when the amount of consumed DPU
resources in this subrack exceeds a preset threshold
for inter-subrack resource sharing.
16)
F2P_DATATRANS_OPTIMIZE_SWITCH(Switch for
Optimized Data Transmission before a State
Transition from CELL_FACH to CELL_PCH or
URA_PCH)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 67


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RNC queries the RLC state before and


after a UE moves from the CELL_FACH state to the
CELL_PCH or URA_PCH state due to event 4B.
A UE in the CELL_FACH state can move to the
CELL_PCH or URA_PCH state even when there is
downlink data transmission for the UE. When this
occurs, data packets are suspended on the RNC side.
This switch is introduced to solve this problem.
1: This switch is turned on. The RNC queries the RLC
state before a UE moves from the CELL_FACH state
to the CELL_PCH or URA_PCH state due to event
4B. If the state query fails, the UE does not perform
the state transition. If the state query succeeds, the UE
continues with the state transition. The RNC queries
the RLC state again after the state transition is
complete and before the L2 link is deactivated. If
there is SRB3, SRB4, or TRB data to be transmitted to
the UE on the RLC, the paging procedure is triggered.
0: This switch is turned off. The original state
transition from CELL_FACH to CELL_PCH or
URA_PCH is used.
This parameter is an advanced parameter. To modify
this parameter, contact Huawei Customer Service
Center for technical support.
17)IRATHO_HOCANCEL_RL_REEST_SWITCH(S
witch for RL Re-establishments During the inter-RAT
Handover)
1: This switch is turned on. The RNC reestablishes an
RL for the UE during a UMTS-to-GSM handover if
RNC detects an SRB reset or all RLs for the UE are
out of synchronization after the RNC sends the UE a
HANDOVER FROM UTRAN COMMAND or a
CELL CHANGE ORDER FROM UTRAN message.
If the RNC receives a CELL UPDATE message after
sending either of the preceding messages to the UE
during a UMTS-to-GSM handover, the RNC supports
parallel handling of the UMTS-to-GSM handover and
cell update procedures.
0: This switch is turned off. The RNC neither
reestablishes the RL for the UE in the preceding
scenario nor supports the parallel handling of the
UMTS-to-GSM handover and cell update procedures.
18)TRB_RESET_RL_REEST_SWITCH(Switch for
RL Re-establishments Triggered by TRB RESET)
1: This switch is turned on. The RNC reestablishes a
radio link (RL) for the UE if the RNC detects a traffic

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 68


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

radio bearer (TRB) reset at layer 2 (L2) under the


following conditions:
UE is in CELL_DCH state and UE is not in any
signaling procedure.
UE has only one PS RAB.
0: This switch is turned off. The RNC does not
reestablish the radio link for the UE under the
preceding conditions.
19)RB_REL_RL_REEST_SWITCH(Switch for RL
Re-establishments During a PS RB Release)
1: This switch is turned on. The RNC reestablishes an
RL for the UE processing CS+PS combined services
during a PS RB release procedure under the following
conditions:
The RNC detects an SRB reset, all uplink RLs for the
UE are out of synchronization upon expiration of the
RL recovery timer, or the RNC does not receive a
response from the UE after sending a RADIO
BEARER RELEASE message to the UE.
If the RNC receives a CELL UPDATE message with
the cause value "RL Failure", "RLC unrecoverable
error", or "re-entering service area" from the UE
processing CS+PS combined services during a PS RB
release procedure, the RNC performs parallel handing
of the PS RB release and cell update procedures.
It is recommended that this switch be turned on
together with
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH
under the "OptimizationSwitch4" parameter in the
"SET URRCTRLSWITCH" command.
0: This switch is turned off. The RNC neither
reestablishes the RL for the UE in the preceding
scenario nor supports the parallel handing of the PS
RB release and cell update procedures.
20)RB_SETUP_ENHANCE_RL_REEST_SWITCH(
Switch for Enhanced RL Re-establishments During an
RB setup)
1: This switch is turned on. The RNC reestablishes a
radio link (RL) for the UE during a radio bearer (RB)
setup CELL_DCH-to-CELL_DCH (D2D) procedure
under the following conditions:
The RNC detects a signaling radio bearer (SRB) reset
at layer 2 (L2) or all uplink RLs for the UE are out of
synchronization upon expiration of the RL Restore
timer and the UE has received the RADIO BEARER
SETUP message.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 69


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

The UE has no response to the RNC after the RNC


sends UE a RADIO BEARER SETUP message.
The switch RB_SETUP_RL_REEST_SWITCH under
"PROCESSSWITCH4" in the "SET
URRCTRLSWITCH" command should be turned on.
And it is recommended that the
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH
and
RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_S
WITCH in the "OptimizationSwitch4" parameter in
the "SET URRCTRLSWITCH" command be set to
on.
0: This switch is turned off. The RNC does not
reestablish the radio link for the UE under the
preceding conditions.
21)RAB_SETUPMOD_CNT_FIX_SWITCH
Whether to correct the methods for measuring the
counters related to RAB setup or reconfiguration
failures of UEs in the CELL_FACH state. The RAB
setup or reconfiguration is triggered by the F2F or
F2D state transition. This switch is turned off by
default.
1: This switch is turned on. The measurement methods
of these counters are corrected based on the
measurement points.
0: This switch is turned off. The measurement
methods of these counters remain unchanged.
22)PCH_UE_RLC_UNRECOVERABLEER-
ROR_SWITCH
Whether to reestablish the call for the UE that sends a
CELL UPDATE message with the cause value "RLC
unrecoverable error" in the CELL_PCH or URA_PCH
state.
1: This switch is turned on. The RNC reestablishes the
call for the UE that sends a CELL UPDATE message
with the cause value "RLC unrecoverable error" in the
CELL_PCH or URA_PCH state.
0: This switch is turned off. The RNC does not
reestablish the call for the UE that sends a CELL
UPDATE message with the cause value "RLC
unrecoverable error" in the CELL_PCH or URA_PCH
state.
23)FAST_RETURN_LTE_BY_CELL_SELECT_SWI
TCH
Whether a UMTS/LTE UE performs fast cell
reselection.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 70


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is turned on. If the best cell is


configured with a neighboring LTE cell and its
priority is lower than the priority of the neighboring
LTE cell, the UE performs fast cell reselection.
0: This switch is turned off. The UE does not perform
fast cell reselection.
24)UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH
Whether a UMTS/LTE UE transits from CELL_DCH
to CELL_PCH or from CELL_DCH to the idle mode
when an inactivity timer expires. The inactivity timer
is specified by the PsInactTmrForFstDrmDch
parameter in the SET UPSINACTTIMER command.
1: This switch is turned on. The UMTS/LTE UE
transits from CELL_DCH to the idle mode when the
inactivity timer expires.
0: This switch is turned off. The UMTS/LTE UE
transits from the CELL_DCH to CELL_PCH when
the inactivity timer expires.
25)PHYCHRECFG_ENH_RL_REEST_SWITCH
Whether the enhanced function of call reestablishment
during physical channel reconfiguration takes effect.
Whether to preferentially process a CELL UPDATE
message when physical channel reconfiguration is in
progress. The RNC receives a CELL UPDATE
message from a UE with a cause value of "radio link
failure", "RLC unrecoverable error", or "re-entering
service area" when expecting a response from the UE
to the physical channel reconfiguration process. In this
scenario,
1: This switch is turned on. The RNC preferentially
processes the CELL UPDATE message.
0: This switch is turned off. The RNC does not
preferentially process the CELL UPDATE message.
This parameter takes effect only when the
PHYCHRECFG_ENH_RL_REEST_SWITCH check
box under the "PROCESSSWITCH4" parameter in
the "SET URRCTRLSWITCH" command is selected.
26)RBRECFG_ENH_RL_REEST_SWITCH
Whether the enhanced function of call reestablishment
during RB reconfiguration takes effect.
Whether to preferentially process a CELL UPDATE
message when RB reconfiguration is in progress. The
RNC receives a CELL UPDATE message from a UE
with a cause value of "radio link failure", "RLC

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 71


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

unrecoverable error", or "re-entering service area"


when expecting a response from the UE to the RB
reconfiguration process. In this scenario,
1: This switch is turned on. The RNC preferentially
processes the CELL UPDATE message. It is
recommended that this switch be used together with
the
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH
in the "OptimizationSwitch4" parameter in the "SET
URRCTRLSWITCH" command.
0: This switch is turned off. The RNC does not
preferentially process the CELL UPDATE message.
This parameter takes effect only when the
RB_RECFG_RL_REEST_SWITCH check box under
the "OptimizationSwitch" parameter in the "SET
URRCTRLSWITCH" command is selected.
27)SMC_STOP_RLC_SWITCH
Whether to stop RLC entities (except RLC entities
used by SRB2) for security-mode-enabled UEs whose
user signaling (except cell-related signaling) is
processed by their overflow RNCs due to load sharing
and that are in the security mode.
1: This switch is turned on. The RNC stops RLC
entities (except RLC entities used by SRB2) for such
UEs. This prevents call drops that are caused by the
ciphering activation time inconsistency between the
UEs and RNC.
0: This switch is turned off. The RNC suspends RLC
entities (except RLC entities used by SRB2) for such
UEs.
28)GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SW
ITCH
Whether the RAB RELEASE REQUEST or IU
RELEASE COMPLETE message carries the IE GTP
PDU SN during the release procedure initiated by the
UTRAN of the PS domain.
1: This switch is turned on. The RAB RELEASE
REQUEST or IU RELEASE COMPLETE message
carries the IE GTP PDU SN. For details, see 3GPP TS
25.413.
0: This switch is turned off. The RAB RELEASE
REQUEST or IU RELEASE COMPLETE message
does not carry the IE GTP PDU SN.
29)CMP_IU_QOS_GTP_PDU_SN_SWITCH

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 72


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether to allow the compatibility processing of


reordering the GTP-U DL transmission if the RAB
ASSIGNMENT REQUEST message carries the IE
Delivery Order with the value of delivery-order-
requested.
1: This switch is turned on. The GTP-U DL
transmission is not reordered.
0: This switch is turned off. The GTP-U DL
transmission uses the DL GTP PDU SN carried by the
RAB ASSIGNMENT REQUEST message as the first
SN for reordering.
30)DL_TRB_RESET_BUFF_SWITCH
Whether not to immediately process a TRB RESET
message if the corresponding TRB resets when an
RRC-related process is in progress. Note that the
RRC-related process is a process that is initiated after
the UE in question has set up a service.
1: This switch is turned on, The RNC processes the
message after the RRC-related process is complete.
0: This switch is turned off, The RNC immediately
processes the message, releases the RAB of the UE,
and notifies the CN that the release is an abnormal
release.
31)RRC_CELLFACH_DL_TRB_RESET_TO_F2D_S
WITCH
Whether to trigger a CELL_FACH-to-CELL_DCH
state transition for a UE not performing any RRC-
related process if the RNC detects a TRB reset.
1: This switch is turned on. The RNC triggers a
CELL_FACH-to-CELL_DCH state transition for such
a UE upon detecting a TRB reset.
0: This switch is turned off. The RNC directly releases
the service of the UE and notifies the CN that the
release is an abnormal release.
32)RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH
Whether to allow data transmission when the RNC
receives a RAB ASSIGNMENT REQUEST message
that carries the transport layer information after the PS
service has been established.
1: This switch is turned on. The RNC reconfigures the
transport layer information and continues with data
transmission. For details, see 3GPP TS 25.413.
0: This switch is turned off. The RNC does not
reconfigure the transport layer information and data
cannot be transmitted.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 73


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

GUI Value Range:


PS_F2D_OVERLAP_CELLUPT_SWITCH,
AMR_HHO_FAIL_ROLLBACK_SWITCH,
PHY_RECFG_REEST_SWITCH,
IUR_RL_REEST_SWITCH,
RB_SETUP_RL_REEST_SWITCH,
RRC_CONN_SETUP_OPT_SWITCH,
TCP_ACK_ACCELERATOR_SWITCH,
RRC_CELLFACH_TRB_RESET_TO_F2D_SWITC
H, SEND_MSG_NULL_SWITCH,
FD_PCH_IUR_CS_OPT_SWITCH,
CELLUPT_T314_T315_TIMEOUT_OPT_SWITCH,
CS_HHO_ASYNC_CTRL_SWITCH,
PS_HHO_ASYNC_CTRL_SWITCH,
IUR_HHO_ASYNC_CTRL_SWITCH,
R8_UE_SEL_DPUE_SWITCH,
F2P_DATATRANS_OPTIMIZE_SWITCH,
IRATHO_HOCANCEL_RL_REEST_SWITCH,
TRB_RESET_RL_REEST_SWITCH,
RB_REL_RL_REEST_SWITCH,
RB_SETUP_ENHANCE_RL_REEST_SWITCH,
RAB_SETUPMOD_CNT_FIX_SWITCH,
PCH_UE_RLC_UNRECOVERABLEER-
ROR_SWITCH,
FAST_RETURN_LTE_BY_CELL_SELECT_SWITC
H, UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH,
PHYCHRECFG_ENH_RL_REEST_SWITCH,
RBRECFG_ENH_RL_REEST_SWITCH,
SMC_STOP_RLC_SWITCH,
GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SWIT
CH, CMP_IU_QOS_GTP_PDU_SN_SWITCH,
DL_TRB_RESET_BUFF_SWITCH,
RRC_CELLFACH_DL_TRB_RESET_TO_F2D_SWI
TCH,
RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH
Unit: None
Actual Value Range:
PS_F2D_OVERLAP_CELLUPT_SWITCH,
AMR_HHO_FAIL_ROLLBACK_SWITCH,
PHY_RECFG_REEST_SWITCH,
IUR_RL_REEST_SWITCH,
RB_SETUP_RL_REEST_SWITCH,
RRC_CONN_SETUP_OPT_SWITCH,
TCP_ACK_ACCELERATOR_SWITCH,
RRC_CELLFACH_TRB_RESET_TO_F2D_SWITC
H, SEND_MSG_NULL_SWITCH,
FD_PCH_IUR_CS_OPT_SWITCH,
CELLUPT_T314_T315_TIMEOUT_OPT_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 74


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

CS_HHO_ASYNC_CTRL_SWITCH,
PS_HHO_ASYNC_CTRL_SWITCH,
IUR_HHO_ASYNC_CTRL_SWITCH,
R8_UE_SEL_DPUE_SWITCH,
F2P_DATATRANS_OPTIMIZE_SWITCH,
IRATHO_HOCANCEL_RL_REEST_SWITCH,
TRB_RESET_RL_REEST_SWITCH,
RB_REL_RL_REEST_SWITCH,
RB_SETUP_ENHANCE_RL_REEST_SWITCH,
RAB_SETUPMOD_CNT_FIX_SWITCH,
PCH_UE_RLC_UNRECOVERABLEER-
ROR_SWITCH,
FAST_RETURN_LTE_BY_CELL_SELECT_SWITC
H, UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH,
PHYCHRECFG_ENH_RL_REEST_SWITCH,
RBRECFG_ENH_RL_REEST_SWITCH,
SMC_STOP_RLC_SWITCH,
GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SWIT
CH,
CMP_IU_QOS_GTP_PDU_SN_SWITCH,
DL_TRB_RESET_BUFF_SWITCH,
RRC_CELLFACH_DL_TRB_RESET_TO_F2D_SWI
TCH,
RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH
Default Value:
PS_F2D_OVERLAP_CELLUPT_SWITCH:
0,AMR_HHO_FAIL_ROLLBACK_SWITCH:
0,PHY_RECFG_REEST_SWITCH:
0,IUR_RL_REEST_SWITCH:
0,RB_SETUP_RL_REEST_SWITCH:
0,RRC_CONN_SETUP_OPT_SWITCH:
0,TCP_ACK_ACCELERATOR_SWITCH:
0,RRC_CELLFACH_TRB_RESET_TO_F2D_SWIT
CH:0,SEND_MSG_NULL_SWITCH:
0,FD_PCH_IUR_CS_OPT_SWITCH:
0,CELLUPT_T314_T315_TIMEOUT_OPT_SWITC
H:0,CS_HHO_ASYNC_CTRL_SWITCH:
0,PS_HHO_ASYNC_CTRL_SWITCH:
0,IUR_HHO_ASYNC_CTRL_SWITCH:
0,R8_UE_SEL_DPUE_SWITCH:
0,F2P_DATATRANS_OPTIMIZE_SWITCH:
0,IRATHO_HOCANCEL_RL_REEST_SWITCH:
0,TRB_RESET_RL_REEST_SWITCH:
0,RB_REL_RL_REEST_SWITCH:
0,RB_SETUP_ENHANCE_RL_REEST_SWITCH:
0,RAB_SETUPMOD_CNT_FIX_SWITCH:

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 75


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd
0,PCH_UE_RLC_UNRECOVERABLEER-
ROR_SWITCH:
0,FAST_RETURN_LTE_BY_CELL_SELECT_SWIT
CH:
0,UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH:
0,PHYCHRECFG_ENH_RL_REEST_SWITCH:
0,RBRECFG_ENH_RL_REEST_SWITCH:
0,SMC_STOP_RLC_SWITCH:
1,GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SWI
TCH:1,CMP_IU_QOS_GTP_PDU_SN_SWITCH:
0,DL_TRB_RESET_BUFF_SWITCH:
0,RRC_CELLFACH_DL_TRB_RESET_TO_F2D_S
WITCH:
0,RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH:1

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 76


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Process BSC691 SET WRFD- 3.4/6.8/1 Meaning:


Switch4 0 URRCT 010510 3.6/27.2 1) AMR_HHO_FAIL_ROLLBACK_SWITCH (HHO
RLSWI WRFD- Kbps Rollback Switch for 12.2k AMR-NB Services)
TCH 0106090 RRC
Connect 1: This switch is turned on. The RNC supports
2
ion and rollback caused by failed hard handovers of 12.2k
WRFD- Radio AMR speech services. It is recommended that the
010101 Access timer T312 be set to 1 second (SET
WRFD- Bearer UCONNMODETIMER: T312=1;) before turning on
140226 Establis this switch. If the timer T312 is not set to 1 second,
hment AMR noise will occur on some UEs. If the AMRC
WRFD-
and feature is enabled, the RNC supports the hard
140103
Release handover failure rollback of only for 12.2 kbit/s
WRFD- narrowband AMR services.
0204000 Combin
2 ation of 0: This switch is turned off. The RNC does not
One CS support rollback caused by failed hard handovers of
WRFD- Service 12.2k AMR speech services, leading to call drops.
140205 and One 2) RRC_CONN_SETUP_OPT_SWITCH (RRC
WRFD- PS CONNECTION SETUP Message Optimization
020302 Service Switch)
WRFD- 3GPP Whether optimization of the RRC CONNECTION
020303 R9 SETUP message takes effect.
WRFD- Specific
ations 1: This switch is turned on. Optimization of the RRC
020304
CONNECTION SETUP message takes effect. If the
WRFD- Fast
IE RLC info under SRB3 or SRB4 in the RRC
020305 Return
CONNECTION SETUP message contains the same
from
WRFD- information as that under SRB2, the RNC replaces the
UMTS
020306 IE RLC info under SRB3 or SRB4 with the IE same
to LTE
as RB:0x2(2) to shorten the length of the message.
Call
Reestabl 0: This switch is turned off. The RNC does not replace
ishment the IE RLC info under SRB3 or SRB4 in the RRC
CONNECTION SETUP message.
Inter
System 3) PS_F2D_OVERLAP_CELLUPT_SWITCH
Direct (Switch for Simultaneous PS Service Setup F2D and
Retry Cell Update Procedures)
Voice During the PS service setup, the RNC undoes a
Service CELL_FACH-to-CELL_DCH (F2D for short)
Experie procedure when it receives a Cell Update message
nce with the cause value "cell reselection" during the F2D
Improve procedure.
ment for 1: This switch is turned on. The RNC temporarily
Weak does not send the
Receptio RANAP_RAB_ASSIGNMENT_RESP message to the
n Ues CN after the F2D procedure is undone and waits until
Inter the Cell Update message is processed and the PS
Frequen service is set up successfully.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 77


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

cy Hard 0: This switch is turned off. The RNC directly


Handov responds to the CN with a
er Based RANAP_RAB_ASSIGNMENT_RESP message with
on the cause value "failure-in-the-radio-interface-
Coverag procedure" after the F2D procedure is undone,
e indicating that the PS service fails to be set up.
Inter- 4) TCP_ACK_ACCELERATOR_SWITCH (Switch
RAT for Throughput Increase in the Case of Simultaneous
Handov uplink and downlink Transmissions)
er Based This switch is turned on to increase the total
on throughput in the uplink and downlink only when
Coverag uplink and downlink HSPA data is transmitted
e simultaneously. In other scenarios, you are advised to
Inter turn off the switch.
Frequen 1: This switch is turned on. The function of increasing
cy Hard the total throughput in the case of simultaneous uplink
Handov and downlink transmissions takes effect.
er Based
on DL 0: This switch is turned off. The function of increasing
QoS the total throughput in the case of simultaneous uplink
and downlink transmissions does not take effect.
Inter-
RAT 5) PHY_RECFG_REEST_SWITCH (Switch for RL
Handov Re-establishments During the Physical Channel
er Based Reconfiguration)
on 1: This switch is turned on. The UE sends the RNC a
Service Cell Update message with the cause value "Radio
Inter- Link Failure" and the RNC reestablishes the radio link
RAT for the UE under the following conditions:
Handov The UE has not responded to the Physical Channel
er Based Reconfiguration message.
on Load The RNC detects interrupted downlink transmission
on SRB2 or the NodeB reports that all radio links of
the UE are out of synchronization.
0: This switch is turned off. The RNC does not
reestablish the radio link for the UE under the
preceding conditions.
6) IUR_RL_REEST_SWITCH (Iur RL
Reestablishment Switch)
1: This switch is turned on. The RNC deletes the
existing Iur radio links for the UE during the RNC
performing radio link reestablishment.
0: This switch is turned off. The RNC does not delete
the existing Iur radio links during the RNC
performing radio link reestablishment.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 78


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

7) RB_SETUP_RL_REEST_SWITCH (Switch for


RL Reestablishment or Cell Update During an RB
Setup)
1: This switch is turned on. When the RNC is waiting
for a UE's response during a radio bearer (RB) setup
CELL_DCH-to-CELL_DCH (D2D) procedure:
The RNC reestablishes a radio link (RL) for the UE if
the RNC detects a signaling radio bearer (SRB) reset
at layer 2 (L2) or all uplink RLs for the UE are out of
synchronization upon expiration of the RL Restore
timer.
The RNC performs a cell update if the RNC receives a
CELL UPDATE message with the cause value of RL
FAILURE, RLC UNRECOVERABLE ERROR, or
REENTERED SERVICE AREA.
0: This switch is turned off. When the RNC is waiting
for a UE's response during an RB setup D2D
procedure, the RNC does not perform an RL
reestablishment or cell update even if the trigger
conditions are met.
8)
RRC_CELLFACH_TRB_RESET_TO_F2D_SWITC
H (The CELL_FACH-to-CELL_DCH state (F2D)
transition switch by TRB reset)
When the RNC receives a TRB reset request from a
UE in the CELL_FACH state, the RNC cannot
respond to the UE with a confirm message if the
FACH is congested. The
RRC_CELLFACH_TRB_RESET_TO_F2D_SWITC
H parameter specifies whether a UE performs an F2D
transition if the number of TRB reset requests from
the UE to the RNC reaches a specified threshold.
1: This switch is turned on. The UE moves from the
CELL_FACH state to the CELL_DCH state.
0: This switch is turned off. The UE does not move
from the CELL_FACH state to the CELL_DCH state.
This function helps to reduce the number of call drops
caused by the RNC not responding to the TRB reset
requests during FACH congestion.
9) SEND_MSG_NULL_SWITCH (MM NULL
Message Switch)
Whether the RNC sends an MM NULL message to
the CS CN. If the switch
RNC_CS_QUERY_UE_IMEI_SWITCH under
PROCESSSWITCH2 in the SET URRCTRLSWITCH

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 79


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

command is turned on, testing the interworking


between the RNC and the CN is required. If the CN
needs to verify the serial number of direct transfer
messages, turn on this switch.
The RNC rather than the CS CN sends an IDENTITY
REQUEST message to a UE to obtain its IMEI. Upon
receiving an IDENTITY RESPONSE message from
the UE:
1: This switch is turned on. The RNC sends an MM
NULL message to the CS CN.
0: This switch is turned off. The RNC does not send
an MM NULL message to the CS CN.
10)FD_PCH_IUR_CS_OPT_SWITCH
CS paging message processing switch for UEs in the
CELL_PCH or URA_PCH state that support fast
dormancy on the drift radio network controller
(DRNC) side.
1: This switch is turned on. The SRNC instructs these
UEs to move to the CELL_DCH state and to establish
CS services when these UEs receive a CS paging
message.
0: This switch is turned off. The SRNC releases the
connection of these UEs when these UEs receive a CS
paging message.
11)CELLUPT_T314_T315_TIMEOUT_OPT_SWITC
H
Whether the RNC releases the connection of a UE in a
state other than CELL_DCH when the T314/T315
timer in the cell update message received by the UE
expires.
1: This switch is turned on. The RNC continues with
the cell update processing when the T314/T315 timer
in the cell update message expires.
0: This switch is turned off. The RNC abnormally
releases the connection of the UE when the T314/
T315 timer in the cell update message expires.
12)
CS_HHO_ASYNC_CTRL_SWITCH(Asynchronous
Reconfigure Switch for CS HHO)
1: This switch is turned on. The RNC does not put the
activation time information element (IE) in the hard
handover configuration message for CS services.
After receiving the message, the UE immediately
activates the configuration.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 80


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. The RNC puts the


activation time IE in the hard handover configuration
message for CS services. After receiving the message,
the UE activates the configuration at the specified
activation time.
13)
PS_HHO_ASYNC_CTRL_SWITCH(Asynchronous
Reconfigure Switch for PS HHO)
1: This switch is turned on. The RNC does not put the
activation time information element (IE) in the hard
handover configuration message for PS services. After
receiving the message, the UE immediately activates
the configuration.
0: This switch is turned off. The RNC puts the
activation time IE in the hard handover configuration
message for PS services. After receiving the message,
the UE activates the configuration at the specified
activation time.
14)
IUR_HHO_ASYNC_CTRL_SWITCH(Asynchronous
Reconfigure Switch for Iur HHO)
1: This switch is turned on. The RNC does not put the
activation time information element (IE) in the hard
handover configuration message across the Iur
interface. After receiving the message, the UE
immediately activates the configuration.
0: This switch is turned off. The RNC puts the
activation time IE in the hard handover configuration
message across the Iur interface. After receiving the
message, the UE activates the configuration at the
specified activation time.
15)
F2P_DATATRANS_OPTIMIZE_SWITCH(Switch for
Optimized Data Transmission before a State
Transition from CELL_FACH to CELL_PCH or
URA_PCH)
Whether the RNC queries the RLC state before and
after a UE moves from the CELL_FACH state to the
CELL_PCH or URA_PCH state due to event 4B.
A UE in the CELL_FACH state can move to the
CELL_PCH or URA_PCH state even when there is
downlink data transmission for the UE. When this
occurs, data packets are suspended on the RNC side.
This switch is introduced to solve this problem.
1: This switch is turned on. The RNC queries the RLC
state before a UE moves from the CELL_FACH state

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 81


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

to the CELL_PCH or URA_PCH state due to event


4B. If the state query fails, the UE does not perform
the state transition. If the state query succeeds, the UE
continues with the state transition. The RNC queries
the RLC state again after the state transition is
complete and before the L2 link is deactivated. If
there is SRB3, SRB4, or TRB data to be transmitted to
the UE on the RLC, the paging procedure is triggered.
0: This switch is turned off. The original state
transition from CELL_FACH to CELL_PCH or
URA_PCH is used.
This parameter is an advanced parameter. To modify
this parameter, contact Huawei Customer Service
Center for technical support.
16)IRATHO_HOCANCEL_RL_REEST_SWITCH(S
witch for RL Re-establishments During the inter-RAT
Handover)
1: This switch is turned on. The RNC reestablishes a
radio link (RL) for the UE during a inter-RAT
Handover procedure if the RNC detects a signaling
radio bearer (SRB) reset at layer 2 (L2) or all uplink
RLs for the UE are out of synchronization upon
expiration of the RL Restore timer after the RNC
sends UE a HANDOVER FROM UTRAN
COMMAND message or a CELL CHANGE ORDER
FROM UTRAN message and UE fails to receive these
two messages.
0: This switch is turned off. The RNC does not
reestablish the radio link for the UE under the
preceding conditions.
17)TRB_RESET_RL_REEST_SWITCH(Switch for
RL Re-establishments Triggered by TRB RESET)
1: This switch is turned on. The RNC reestablishes a
radio link (RL) for the UE if the RNC detects a traffic
radio bearer (TRB) reset at layer 2 (L2) under the
following conditions:
UE is in CELL_DCH state and UE is not in any
signaling procedure.
UE has only one PS RAB.
0: This switch is turned off. The RNC does not
reestablish the radio link for the UE under the
preceding conditions.
18)RB_REL_RL_REEST_SWITCH(Switch for RL
Re-establishments During a PS RB Release)
1: This switch is turned on. The RNC reestablishes a
radio link (RL) for the UE during a PS radio bearer

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 82


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

(RB) release procedure under the following


conditions:
The RNC detects a signaling radio bearer (SRB) reset
at layer 2 (L2) or all uplink RLs for the UE are out of
synchronization upon expiration of the RL Restore
timer or UE has no response to RNC after RNC sends
UE a RADIO BEARER RELEASE message.
The UE has both CS RAB and PS RAB.
The UE is in CELL_DCH state.
It is recommended that this switch be used together
with the
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH
in the "OptimizationSwitch4" parameter in the "SET
URRCTRLSWITCH" command.
0: This switch is turned off. The RNC does not
reestablish the radio link for the UE under the
preceding conditions.
19)RB_SETUP_ENHANCE_RL_REEST_SWITCH(
Switch for Enhanced RL Re-establishments During an
RB setup)
1: This switch is turned on. The RNC reestablishes a
radio link (RL) for the UE during a radio bearer (RB)
setup CELL_DCH-to-CELL_DCH (D2D) procedure
under the following conditions:
The RNC detects a signaling radio bearer (SRB) reset
at layer 2 (L2) or all uplink RLs for the UE are out of
synchronization upon expiration of the RL Restore
timer and the UE has received the RADIO BEARER
SETUP message.
The UE has no response to the RNC after the RNC
sends UE a RADIO BEARER SETUP message.
The switch RB_SETUP_RL_REEST_SWITCH under
"PROCESSSWITCH4" in the "SET
URRCTRLSWITCH" command should be turned on.
And it is recommended that the
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH
and
RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_S
WITCH in the "OptimizationSwitch4" parameter in
the "SET URRCTRLSWITCH" command be set to
on.
0: This switch is turned off. The RNC does not
reestablish the radio link for the UE under the
preceding conditions.
20)RAB_SETUPMOD_CNT_FIX_SWITCH

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 83


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether to correct the methods for measuring the


counters related to RAB setup or reconfiguration
failures of UEs in the CELL_FACH state. The RAB
setup or reconfiguration is triggered by the F2F or
F2D state transition. This switch is turned off by
default.
1: This switch is turned on. The measurement methods
of these counters are corrected based on the
measurement points.
0: This switch is turned off. The measurement
methods of these counters remain unchanged.
21)PCH_UE_RLC_UNRECOVERABLEER-
ROR_SWITCH(RL Reestablishment Switch for PCH
UEs Experiencing RLC Unrecoverable Errors)
Whether the RNC reestablishes the radio link (RL) for
the UE in the CELL_PCH or URA_PCH state after
receiving a cell update message with the cause value
"RLC unrecoverable error" from the UE.
1: This switch is set to on. When a UE in the
CELL_PCH or URA_PCH state sends a cell update
message with the cause value "RLC unrecoverable
error", the RNC reestablishes the RL for the UE.
0: This switch is set to off. When a UE in the
CELL_PCH or URA_PCH state sends a cell update
message with the cause value "RLC unrecoverable
error", the RNC does not reestablish the RL for the
UE.
22)FAST_RETURN_LTE_BY_CELL_SELECT_SWI
TCH
Whether a UMTS/LTE UE performs fast cell
reselection.
1: This switch is turned on. If the best cell is
configured with a neighboring LTE cell and its
priority is lower than the priority of the neighboring
LTE cell, the UE performs fast cell reselection.
0: This switch is turned off. The UE does not perform
fast cell reselection.
23)UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH
Whether a UMTS/LTE UE transits from CELL_DCH
to CELL_PCH or from CELL_DCH to the idle mode
when an inactivity timer expires. The inactivity timer
is specified by the PsInactTmrForFstDrmDch
parameter in the SET UPSINACTTIMER command.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 84


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is turned on. The UMTS/LTE UE


transits from CELL_DCH to the idle mode when the
inactivity timer expires.
0: This switch is turned off. The UMTS/LTE UE
transits from the CELL_DCH to CELL_PCH when
the inactivity timer expires.
24)PHYCHRECFG_ENH_RL_REEST_SWITCH
Whether the enhanced function of call reestablishment
during physical channel reconfiguration takes effect.
Whether to preferentially process a CELL UPDATE
message when physical channel reconfiguration is in
progress. The RNC receives a CELL UPDATE
message from a UE with a cause value of "radio link
failure", "RLC unrecoverable error", or "re-entering
service area" when expecting a response from the UE
to the physical channel reconfiguration process. In this
scenario,
1: This switch is turned on. The RNC preferentially
processes the CELL UPDATE message.
0: This switch is turned off. The RNC does not
preferentially process the CELL UPDATE message.
This parameter takes effect only when the
PHYCHRECFG_ENH_RL_REEST_SWITCH check
box under the "PROCESSSWITCH4" parameter in
the "SET URRCTRLSWITCH" command is selected.
25)RBRECFG_ENH_RL_REEST_SWITCH
Whether the enhanced function of call reestablishment
during RB reconfiguration takes effect.
Whether to preferentially process a CELL UPDATE
message when RB reconfiguration is in progress. The
RNC receives a CELL UPDATE message from a UE
with a cause value of "radio link failure", "RLC
unrecoverable error", or "re-entering service area"
when expecting a response from the UE to the RB
reconfiguration process. In this scenario,
1: This switch is turned on. The RNC preferentially
processes the CELL UPDATE message.
It is recommended that this switch be used together
with the
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH
in the "OptimizationSwitch4" parameter in the "SET
URRCTRLSWITCH" command.
0: This switch is turned off. The RNC does not
preferentially process the CELL UPDATE message in
the preceding scenario.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 85


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

This parameter takes effect only when the


RB_RECFG_RL_REEST_SWITCH check box under
the "OptimizationSwitch" parameter in the "SET
URRCTRLSWITCH" command is selected.
26)SMC_STOP_RLC_SWITCH
Whether to stop RLC entities (except RLC entities
used by SRB2) for security-mode-enabled UEs whose
user signaling (except cell-related signaling) is
processed by their overflow RNCs due to load sharing
and that are in the security mode.
1: This switch is turned on. The RNC stops RLC
entities (except RLC entities used by SRB2) for such
UEs. This prevents call drops that are caused by the
ciphering activation time inconsistency between the
UEs and RNC.
0: This switch is turned off. The RNC suspends RLC
entities (except RLC entities used by SRB2) for such
UEs.
27)GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SW
ITCH
Whether the RAB RELEASE REQUEST or IU
RELEASE COMPLETE message carries the IE GTP
PDU SN during the release procedure initiated by the
UTRAN of the PS domain.
1: This switch is turned on. The RAB RELEASE
REQUEST or IU RELEASE COMPLETE message
carries the IE GTP PDU SN. For details, see 3GPP TS
25.413.
0: This switch is turned off. The RAB RELEASE
REQUEST or IU RELEASE COMPLETE message
does not carry the IE GTP PDU SN.
28)CMP_IU_QOS_GTP_PDU_SN_SWITCH
Whether to allow the compatibility processing of
reordering the GTP-U DL transmission if the RAB
ASSIGNMENT REQUEST message carries the IE
Delivery Order with the value of delivery-order-
requested.
1: This switch is turned on. The GTP-U DL
transmission is not reordered.
0: This switch is turned off. The GTP-U DL
transmission uses the DL GTP PDU SN carried by the
RAB ASSIGNMENT REQUEST message as the first
SN for reordering.
29)DL_TRB_RESET_BUFF_SWITCH

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 86


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether not to immediately process a TRB RESET


message if the corresponding TRB resets when an
RRC-related process is in progress. Note that the
RRC-related process is a process that is initiated after
the UE in question has set up a service.
1: This switch is turned on. The RNC processes the
message after the RRC-related process is complete.
0: This switch is turned off. The RNC immediately
processes the message, releases the RAB of the UE,
and notifies the CN that the release is an abnormal
release.
30)RRC_CELLFACH_DL_TRB_RESET_TO_F2D_S
WITCH
Whether to trigger a CELL_FACH-to-CELL_DCH
state transition for a UE not performing any RRC-
related process if the RNC detects a TRB reset.
1: This switch is turned on. The RNC triggers a
CELL_FACH-to-CELL_DCH state transition for such
a UE upon detecting a TRB reset.
0: This switch is turned off. The RNC directly releases
the service of the UE and notifies the CN that the
release is an abnormal release.
31)RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH
Whether to allow data transmission when the RNC
receives a RAB ASSIGNMENT REQUEST message
that carries the transport layer information after the PS
service has been established.
1: This switch is turned on. The RNC reconfigures the
transport layer information and continues with data
transmission. For details, see 3GPP TS 25.413.
0: This switch is turned off. The RNC does not
reconfigure the transport layer information and data
cannot be transmitted.
GUI Value Range:
PS_F2D_OVERLAP_CELLUPT_SWITCH,
AMR_HHO_FAIL_ROLLBACK_SWITCH,
PHY_RECFG_REEST_SWITCH,
IUR_RL_REEST_SWITCH,
RB_SETUP_RL_REEST_SWITCH,
RRC_CONN_SETUP_OPT_SWITCH,
TCP_ACK_ACCELERATOR_SWITCH,
RRC_CELLFACH_TRB_RESET_TO_F2D_SWITC
H, SEND_MSG_NULL_SWITCH,
FD_PCH_IUR_CS_OPT_SWITCH,
CELLUPT_T314_T315_TIMEOUT_OPT_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 87


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

CS_HHO_ASYNC_CTRL_SWITCH,
PS_HHO_ASYNC_CTRL_SWITCH,
IUR_HHO_ASYNC_CTRL_SWITCH,
F2P_DATATRANS_OPTIMIZE_SWITCH,
IRATHO_HOCANCEL_RL_REEST_SWITCH,
TRB_RESET_RL_REEST_SWITCH,
RB_REL_RL_REEST_SWITCH,
RB_SETUP_ENHANCE_RL_REEST_SWITCH,
RAB_SETUPMOD_CNT_FIX_SWITCH,
PCH_UE_RLC_UNRECOVERABLEER-
ROR_SWITCH,
FAST_RETURN_LTE_BY_CELL_SELECT_SWITC
H, UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH,
PHYCHRECFG_ENH_RL_REEST_SWITCH,
RBRECFG_ENH_RL_REEST_SWITCH,
SMC_STOP_RLC_SWITCH,
GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SWIT
CH, CMP_IU_QOS_GTP_PDU_SN_SWITCH,
DL_TRB_RESET_BUFF_SWITCH,
RRC_CELLFACH_DL_TRB_RESET_TO_F2D_SWI
TCH,
RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH
Unit: None
Actual Value Range:
PS_F2D_OVERLAP_CELLUPT_SWITCH,
AMR_HHO_FAIL_ROLLBACK_SWITCH,
PHY_RECFG_REEST_SWITCH,
IUR_RL_REEST_SWITCH,
RB_SETUP_RL_REEST_SWITCH,
RRC_CONN_SETUP_OPT_SWITCH,
TCP_ACK_ACCELERATOR_SWITCH,
RRC_CELLFACH_TRB_RESET_TO_F2D_SWITC
H, SEND_MSG_NULL_SWITCH,
FD_PCH_IUR_CS_OPT_SWITCH,
CELLUPT_T314_T315_TIMEOUT_OPT_SWITCH,
CS_HHO_ASYNC_CTRL_SWITCH,
PS_HHO_ASYNC_CTRL_SWITCH,
IUR_HHO_ASYNC_CTRL_SWITCH,
F2P_DATATRANS_OPTIMIZE_SWITCH,
IRATHO_HOCANCEL_RL_REEST_SWITCH,
TRB_RESET_RL_REEST_SWITCH,
RB_REL_RL_REEST_SWITCH,
RB_SETUP_ENHANCE_RL_REEST_SWITCH,
RAB_SETUPMOD_CNT_FIX_SWITCH,
PCH_UE_RLC_UNRECOVERABLEER-
ROR_SWITCH,
FAST_RETURN_LTE_BY_CELL_SELECT_SWITC
H, UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 88


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

PHYCHRECFG_ENH_RL_REEST_SWITCH,
RBRECFG_ENH_RL_REEST_SWITCH,
SMC_STOP_RLC_SWITCH,
GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SWIT
CH,
CMP_IU_QOS_GTP_PDU_SN_SWITCH,
DL_TRB_RESET_BUFF_SWITCH,
RRC_CELLFACH_DL_TRB_RESET_TO_F2D_SWI
TCH,
RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH
Default Value:
PS_F2D_OVERLAP_CELLUPT_SWITCH:
0,AMR_HHO_FAIL_ROLLBACK_SWITCH:
0,PHY_RECFG_REEST_SWITCH:
0,IUR_RL_REEST_SWITCH:
0,RB_SETUP_RL_REEST_SWITCH:
0,RRC_CONN_SETUP_OPT_SWITCH:
0,TCP_ACK_ACCELERATOR_SWITCH:
0,RRC_CELLFACH_TRB_RESET_TO_F2D_SWIT
CH:0,SEND_MSG_NULL_SWITCH:
0,FD_PCH_IUR_CS_OPT_SWITCH:
0,CELLUPT_T314_T315_TIMEOUT_OPT_SWITC
H:0,CS_HHO_ASYNC_CTRL_SWITCH:
0,PS_HHO_ASYNC_CTRL_SWITCH:
0,IUR_HHO_ASYNC_CTRL_SWITCH:
0,F2P_DATATRANS_OPTIMIZE_SWITCH:
0,IRATHO_HOCANCEL_RL_REEST_SWITCH:
0,TRB_RESET_RL_REEST_SWITCH:
0,RB_REL_RL_REEST_SWITCH:
0,RB_SETUP_ENHANCE_RL_REEST_SWITCH:
0,RAB_SETUPMOD_CNT_FIX_SWITCH:
0,PCH_UE_RLC_UNRECOVERABLEER-
ROR_SWITCH:
0,FAST_RETURN_LTE_BY_CELL_SELECT_SWIT
CH:
0,UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH:
0,PHYCHRECFG_ENH_RL_REEST_SWITCH:
0,RBRECFG_ENH_RL_REEST_SWITCH:
0,SMC_STOP_RLC_SWITCH:
1,GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SWI
TCH:1,CMP_IU_QOS_GTP_PDU_SN_SWITCH:
0,DL_TRB_RESET_BUFF_SWITCH:
0,RRC_CELLFACH_DL_TRB_RESET_TO_F2D_S
WITCH:
0,RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH:1

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 89


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Optimiz BSC690 SET WRFD- Dynami Meaning:


ationSwi 0 URRCT 021101 c 1) PAGGING_NUM_CTRL_SWITCH
tch RLSWI WRFD- Channel
Maximum number of paging attempts in the RAN
TCH 010510 Configu
network when no response is received after a paging
ration
WRFD- message is sent.
Control
010651 (DCCC) 1: This switch is turned on. The paging message is
WRFD- sent for a maximum of 5 times.
3.4/6.8/1
140103 3.6/27.2 0: This switch is turned off. The paging message is
WRFD- Kbps sent for a maximum of 10 times.
040100 RRC 2) ASU_RL_RESET_SWITCH(Switch for RL
WRFD- Connect Reestablishment During Soft Handover)
010507 ion and Whether to trigger radio link (RL) reestablishment
Radio during a soft handover.
WRFD-
Access
140226 1: This switch is turned on. A UE sends a CELL
Bearer
WRFD- Establis UPDATE message to the RNC and subsequently the
020500 hment RNC reestablishes the RL for the UE when both of the
and following conditions are met:
WRFD-
010301 Release -The RNC is waiting for the UE's response to the
HSDPA ACTIVE SET UPDATE message.
WRFD-
0106150 over Iur -The RNC detects that downlink transmission on
2 signaling radio bearer (SRB2) is disconnected or the
Call
NodeB reports that all RLs for the UE are out of
WRFD- Reestabl
synchronization.
010801 ishment
0: This switch is turned off. The RNC does not
WRFD- Flow
reestablish the RL for the UE when the preceding
010802 Control
conditions are met.
WRFD- Rate 3) MC_RL_RESET_SWITCH(Switch for RL
011402 Negotiat Reestablishment During Meas Control)
WRFD- ion at
Admissi Whether to trigger RL reestablishment during
0106150 measurement control.
4 on
Control 1: This switch is turned on. A UE sends a CELL
UPDATE message to the RNC and subsequently the
Fast
RNC reestablishes the RL for the UE when both of the
Return
following conditions are met:
from
UMTS -The RNC has sent a MEASUREMENT CONTROL
to LTE message to the UE.
Enhance -The RNC detects that downlink transmission on
d Fast SRB2 is disconnected when the UE state is stable.
Dorman 0: This switch is turned off. The RNC does not
cy reestablish the RL for the UE when the preceding
Paging conditions are met.
UE in 4)
Idle, FD_PCH_REENTERSA_FORCE_RRC_REL_SWIT
CELL_P CH.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 90


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

CH, Whether to enable the RNC to release the RRC


URA_P connection of an EFD-capable UE that received an
CH SCRI message from the PS domain of the CN if the
State UE sends the RNC a CELL UPDATE message after
(Type 1) reentering a service area. When this switch is turned
Combin on, the RNC releases the RRC connection of such a
ation of UE in the preceding scenario. This solves the problem
One CS that a network becomes inaccessible when such a UE
Service reenters a service area.
and Two 1: This switch is turned on. The RNC directly releases
PS the RRC connection after receiving the CELL
Services UPDATE message from the Enhanced Fast
Intra Dormancy-capable that leaves and then reenters the
RNC service area.
Cell 0: This switch is turned off. The RNC processes the
Update CELL UPDATE message received from the Enhanced
Fast Dormancy-capable UE that leaves and then
Inter
reenters the service area.
RNC
Cell 5) UE_CRC_COMPATIBLE_SWITCH.
Update Whether the RNC normally releases connections
Encrypti when it detects failed cyclic redundancy check (CRC)
on on RB SETUP COMPLETE or RB
RECONFIGURATION COMPLETE messages
Combin
received from HSDPA UEs.
ation of
One CS 1: This switch is turned on. If the TACs added through
Service the MML command ADD UIMEITAC contain the
and TAC of this UE, and the TAC_FUNC parameter is set
Three to HSDPA_RB_Setup_Cmp_CRC, the RNC normally
PS releases the connections when it detects the failed
Services CRC. If either of the preceding conditions is not met,
the RNC abnormally releases the connections when it
detects the failed CRC.
0: This switch is turned off. The RNC abnormally
releases the connections when it detects the failed
CRC.
6) RNC_P2D_DRD_SWITCH.
Whether the RNC performs the directed retry decision
(DRD) when it receives a CELL UPDATE message
with the cause value "uplink data transmission" or "
paging response" during UEs' state transition from
CELL_PCH or URA_PCH to CELL_DCH.
1: This switch is turned on. The RNC performs the
DRD in the preceding scenario.
0: This switch is turned off. The RNC does not
perform the DRD in the preceding scenario.
7) P2D_SWITCH.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 91


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RNC switches a UE from the


CELL_PCH or URA_PCH state to the CELL_DCH
state when the following conditions are met:
The UE sends the RNC a CELL UPDATE message
with the cause value "uplink data transmission" or
"paging response."
The number of UEs on the FACH reaches the upper
limit or the UE is to set up a CS service but the
common channel is congested.
1: This switch is set to on. The RNC switches the UE
from the CELL_PCH or URA_PCH state to the
CELL_DCH state in the preceding scenario.
0: This switch is set to off. The RNC does not switch
the UE from the CELL_PCH or URA_PCH state to
the CELL_DCH state in the preceding scenario.
This parameter can be set in both the "SET
URRCTRLSWITCH" and "ADD
UCELLFACHCONGCTRL" commands. The value of
this parameter in the "ADD
UCELLFACHCONGCTRL" command prevails.
8) AMR_F2D_OVERLAP_CELLUPT_SWITCH
Whether the RNC proceeds with CS RAB setup in a
state transition from CELL_FACH to CELL_DCH if
the same UE reports a CELL UPDATE message with
the cause value "cell reselection" during the CS RAB
setup.
1: This switch is set to ON. The RNC rolls back the
CS RAB setup procedure without sending a response
message to the CN. The RNC proceeds with the RAB
assignment procedure after finishing the cell update
procedure.
0: This switch is set to off. The RNC rolls back the CS
RAB setup procedure and sends a RAB
ASSIGNMENT RESPONSE message to the CN,
which indicates a RAB assignment failure. The CS
service setup fails.
9) SRB_RESET_RL_SETUP_SWITCH
Whether the RNC reestablishes a radio link (RL)
when it detects an SRB reset reported on Layer 2 for
decreasing the number of UE call drops
1: This switch is turned on. The RNC reestablishes an
RL when it detects the SRB reset.
0: This switch is turned off. The RNC does not
reestablish an RL when it detects the SRB reset.
10) RLFAIL_RL_SETUP_SWITCH

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 92


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether active link re-establishment is allowed after


the radio link fails
1: This switch is turned on. Active link re-
establishment is allowed after the RNC receives a
RADIO LINK FAILURE INDICATION message and
the timer used to wait for a RADIO LINK RESTORE
INDICATION message from the NodeB expires.
0: This switch is turned off. Active link re-
establishment is not allowed after the RNC receives a
RADIO LINK FAILURE INDICATION message and
the timer used to wait for a RADIO LINK RESTORE
INDICATION message from the NodeB expires.
11) CS_RL_SETUP_SWITCH
Whether the RNC reestablishes a radio link (RL)
when SRBs of a CS service reset or all its RLs are out
of synchronization.
1: This switch is turned on. The RNC reestablishes an
RL in the preceding scenario.
0: This switch is turned off. The RNC does not
reestablish an RL in the preceding scenario.
12) PS_RL_SETUP_SWITCH
Whether PS services can trigger active link re-
establishment
1: This switch is turned on. PS services can trigger
active link re-establishment.
0: This switch is turned off. PS services cannot trigger
active link re-establishment.
13) UE_SRB_RESET_SWITCH
Whether the RNC reestablishes a radio link (RL)
when it receives a CELL UPDATE message carrying
SRB reset information.
1: This switch is turned on. The RNC does not release
the RRC connection and it reestablishes an RL.
0: This switch is turned off. The RNC releases the
RRC connection.
14) RL_RESTORE_SWITCH
Switch for the radio link restoration timer
1: This switch is turned on. If there are CS services
and the last radio link fails, the RNC waits for the
radio link to restore before the timer T313 expires.
0: This switch is turned off. If there are CS services
and the last radio link fails, the RNC waits for the
radio link to restore before the original timer expires.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 93


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

15) RNC_EFD_D2F_SWITCH
Whether to enable RNC-level UE state transition from
CELL_DCH to CELL_FACH (D2F) for fast
dormancy-capable UEs.
1: This switch is turned on. The D2F state transition is
enabled for the fast dormancy-capable UEs..
0: This switch is turned off. The state transition from
CELL_DCH to CELL_PCH (D2P) is enabled for the
fast dormancy-capable UEs
16) RNC_RB_SCRI_NOT_DROP_SWITCH
Whether the RB release due to SCRI during RB
reconfiguration is calculated as a call drop
1: This switch is turned on. The RB release due to
SCRI during reconfiguration is not calculated as a call
drop.
0: This switch is turned off. The RB release due to
SCRI during reconfiguration is calculated as a call
drop.
17) RRC_RECONN_SWITCH
Switch for the RNC to process the RRC connection
setup requests from a UE.
1: This switch is turned on. The RNC releases the
established RRC connection when the UE retransmits
RRC connection setup requests.
0: This switch is turned off. When the UE retransmits
the RRC connection setup request to access the same
cell, the RNC rejects the new RRC connection setup
requests. When the UE retransmits the RRC
connection setup request to access different cells, the
RNC releases the established RRC connection.
It is recommended that this parameter be set to its
default value and the parameter value be not changed.
If you need to change the value of this parameter, ask
for assistance from Huawei technical support
personnel.
18) RRC_REPEAT_PFM_SWITCH
Whether the RNC counts the number of retransmitted
RRC connection setup requests in the measurement of
the RRC.AttConnEstab.Reg and
RRC.AttConnEstab.Detac performance counters.
1: This switch is turned on. The RNC counts the
number of retransmitted RRC connection setup
requests in the measurement of the two preceding
performance counters.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 94


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. The RNC does not count


the number of retransmitted RRC connection setup
requests in the measurement of the two preceding
performance counters.
19) F2D_NO_RSP_RRCREL_SWITCH
Whether the RNC releases the RRC connection of a
UE if the UE does not respond to the RNC after its
three failed attempts at the state transition from
CELL_FACH to CELL_DCH.
1: This switch is turned on. The RRC connection is
released with the cause "User Inactive" after the UE
fails in the state transition from CELL_FACH to
CELL_DCH for three times. The connection release is
measured in the VS.RAB.Rel.PS.F2DNoRsp counter.
0: This switch is turned off. The RRC connection is
not released after the UE fails in the state transition
from CELL_FACH to CELL_DCH three times, and
the UE remains in the CELL_FACH state.
20) CS_SETUP_P2D_SWITCH
Whether a UE in the CELL_PCH or URA_PCH state
preferentially performs a state transition from
CELL_PCH or URA_PCH to CELL_DCH or
CELL_FACH before initiating a CS service.
1: This switch is turned on. The RNC first performs a
state transition from CELL_PCH or URA_PCH to
CELL_DCH and then initiates the CS service.
0: This switch is turned off. The UE first performs a
state transition from CELL_PCH or URA_PCH to
CELL_FACH and then initiates the CS service.
21) SYSHO_CIPHER_IE_SWITCH
Whether the relocation command sent from a UMTS
network to an unencrypted GSM network carries the
UEA0 encryption information element (IE) when a
UE complying with 3GPP Release 6 or later is handed
over from the GSM network to the UMTS network.
1: This switch is turned on. The relocation command
does not carry any encryption IE.
0: This switch is turned off. The relocation command
carries the UEA0 encryption IE.
22) P2P_GTPU_NOT_CFG_SWITCH
Whether to reconfigure the GPRS Tunneling Protocol
User plane (GTP-U) when a UE in the CELL_PCH
state performs a cell update.
1: This switch is turned on. The GTP-U is not
reconfigured in the preceding scenario.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 95


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. The GTP-U is


reconfigured in the preceding scenario.
23) RB_SETUP_CIPHER_TIME_ADJ_SWITCH
Whether the RNC adjusts the activation time for
encryption parameters based on an RB SETUP
COMPLETE message
1: This switch is turned on. The RNC does not adjust
the activation time for encryption parameters as long
as the difference between the activation times
specified in an RB SETUP COMPLETE message and
in the corresponding RB SETUP message is smaller
than 200 connection frame numbers (CFNs).
0: This switch is turned off. The RNC always adjusts
the activation time for encryption parameters based on
an RB SETUP COMPLETE message, regardless of
the preceding difference.
24) CS_PRI_MOD_NOT_INT_SWITCH
Whether the RNC re-initiates CS services upon
receiving a RAB ASSIGNMENT REQUEST message
in which only the CS allocation/retention priority
(CARP) is changed.
1: This switch is turned on. The RNC does not re-
initiate CS services, which prevents CS call drops.
0: This switch is turned off. The RNC re-initiates CS
services, which results in CS call drops.
25)
RAB_SETUP_TMSI_REALLOC_BUF_SWITCH
Whether the RNC buffers a TMSI REALLOCATION
COMMAND message received during an RAB setup.
1: This switch is turned on. The RNC buffers the
TMSI REALLOCATION COMMAND message
received during the RAB setup and then forwards the
message to a UE after the RAB setup.
0: This switch is turned off. The RNC does not buffer
the TMSI REALLOCATION COMMAND message
received during the RAB setup. The RNC directly
forwards the message to a UE.
26) IU_FAULT_REL_PS_RES_SWITCH
Whether an UCP subsystem sends a PS service release
message to an Iu-PS interface board in case of a faulty
IP path, a faulty Signaling Connection Control Part
(SCCP) link, or a reset on the Iu interface
1: This switch is turned on. The UCP subsystem sends
the PS service release message to the Iu-PS interface
board.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 96


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. The UCP subsystem does


not send any PS service release message to the Iu-PS
interface board.
27) RB_RECFG_RL_REEST_SWITCH
Whether the RNC initiates radio link (RL)
reestablishment during a radio bearer (RB)
reconfiguration when the RNC detects that a signaling
radio bearer (SRB) is reset or all RLs for a UE are out
of synchronization
1: This switch is turned on. The RNC initiates RL
reestablishment during the RB reconfiguration.
0: This switch is turned off. The RNC does not initiate
RL reestablishment during the RB reconfiguration.
28) F2P_DT_MSG_BUFFER_SWITCH
Whether the RNC buffers a DIRECT TRANSFER
message received from the CN and sends a PAGING
message after the RNC receives a RADIO BEARER
RECONFIGURATION COMPLETE message from a
UE moving from the CELL_FACH to CELL_PCH
state (F2P for short)
1: This switch is turned on. The RNC buffers the
DIRECT TRANSFER message and sends the
PAGING message to the UE.
0: This switch is turned off. The RNC does not buffer
the DIRECT TRANSFER message.
29) SCRI_COMPATIBLE_SWITCH
Whether the RNC performs compatibility processing
upon receiving a Signalling Connection Release
Indication message with the cause value "UE
Requested PS Data Session End" when CS+PS
combined services are performed.
1: This switch is turned on. The RNC performs
compatibility processing. It sends an RB RELEASE
message containing the Signalling Connection Release
Indication information element (IE) to instruct a UE to
release the signaling connection in the corresponding
domain.
0: This switch is turned off. The RNC does not
perform compatibility processing and it discards the
SCRI message.
30) GTPU_ERR_IND_DEF_SWITCH
Whether the RNC measures the number of call drops
when it receives a GTPU Error Indication message
pertaining to a UE from the CN and releases the RRC
connection.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 97


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is turned on. The RNC does not


measure the number of call drops in the preceding
scenario.
0: This switch is turned off. The RNC measures the
number of call drops when releasing PS services.
31)
IUR_SRV_CELL_CHG_MACHS_RESET_SWITCH
Whether the RNC contains the MAC-hs reset
indicator information element (IE) in the PHYSICAL
CHANNEL RECONFIGURATION and RADIO
BEARER RECONFIGURATION messages for a reset
of the MAC-hs entity. The two messages are sent to a
UE when a service link over the Iur interface changes.
1: This switch is turned on. The RNC contains the
MAC-hs reset indicator IE in the two preceding
messages.
0: This switch is turned off. The RNC does not
contain the MAC-hs reset indicator IE in the two
preceding messages.
32) UL_INTEG_ALGO_COMPAT_SWITCH(UL
Integrity Compatibility Optimization Switch)
Reserved switch for security mode compatibility
handling. The bit field value is not internally used in
this version.
GUI Value Range:
PAGGING_NUM_CTRL_SWITCH,
ASU_RL_RESET_SWITCH,
MC_RL_RESET_SWITCH,
FD_PCH_REENTERSA_FORCE_RRC_REL_SWIT
CH, UE_CRC_COMPATIBLE_SWITCH,
RNC_P2D_DRD_SWITCH, P2D_SWITCH,
AMR_F2D_OVERLAP_CELLUPT_SWITCH,
SRB_RESET_RL_SETUP_SWITCH,
RLFAIL_RL_SETUP_SWITCH,
CS_RL_SETUP_SWITCH,
PS_RL_SETUP_SWITCH,
UE_SRB_RESET_SWITCH,
RL_RESTORE_SWITCH,
RNC_EFD_D2F_SWITCH,
RNC_RB_SCRI_NOT_DROP_SWITCH,
RRC_RECONN_SWITCH,
RRC_REPEAT_PFM_SWITCH,
F2D_NO_RSP_RRCREL_SWITCH,
CS_SETUP_P2D_SWITCH,
SYSHO_CIPHER_IE_SWITCH,
P2P_GTPU_NOT_CFG_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 98


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

RB_SETUP_CIPHER_TIME_ADJ_SWITCH,
CS_PRI_MOD_NOT_INT_SWITCH,
RAB_SETUP_TMSI_REALLOC_BUF_SWITCH,
IU_FAULT_REL_PS_RES_SWITCH,
RB_RECFG_RL_REEST_SWITCH,
F2P_DT_MSG_BUFFER_SWITCH,
SCRI_COMPATIBLE_SWITCH,
GTPU_ERR_IND_DEF_SWITCH,
IUR_SRV_CELL_CHG_MACHS_RESET_SWITCH,
UL_INTEG_ALGO_COMPAT_SWITCH
Unit: None
Actual Value Range:
PAGGING_NUM_CTRL_SWITCH,
ASU_RL_RESET_SWITCH,
MC_RL_RESET_SWITCH,
FD_PCH_REENTERSA_FORCE_RRC_REL_SWIT
CH,
UE_CRC_COMPATIBLE_SWITCH,
RNC_P2D_DRD_SWITCH,
P2D_SWITCH,
AMR_F2D_OVERLAP_CELLUPT_SWITCH,
SRB_RESET_RL_SETUP_SWITCH,
RLFAIL_RL_SETUP_SWITCH,
CS_RL_SETUP_SWITCH,
PS_RL_SETUP_SWITCH,
UE_SRB_RESET_SWITCH,
RL_RESTORE_SWITCH,
RNC_EFD_D2F_SWITCH,
RNC_RB_SCRI_NOT_DROP_SWITCH,
RRC_RECONN_SWITCH,
RRC_REPEAT_PFM_SWITCH,
F2D_NO_RSP_RRCREL_SWITCH,
CS_SETUP_P2D_SWITCH,
SYSHO_CIPHER_IE_SWITCH,
P2P_GTPU_NOT_CFG_SWITCH,
RB_SETUP_CIPHER_TIME_ADJ_SWITCH,
CS_PRI_MOD_NOT_INT_SWITCH,
RAB_SETUP_TMSI_REALLOC_BUF_SWITCH,
IU_FAULT_REL_PS_RES_SWITCH,
RB_RECFG_RL_REEST_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 99


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

F2P_DT_MSG_BUFFER_SWITCH,
SCRI_COMPATIBLE_SWITCH,
GTPU_ERR_IND_DEF_SWITCH,
IUR_SRV_CELL_CHG_MACHS_RESET_SWITCH,
UL_INTEG_ALGO_COMPAT_SWITCH
Default Value: PAGGING_NUM_CTRL_SWITCH:
0,ASU_RL_RESET_SWITCH:
0,MC_RL_RESET_SWITCH:
0,FD_PCH_REENTERSA_FORCE_RRC_REL_SWI
TCH:0,UE_CRC_COMPATIBLE_SWITCH:
0,RNC_P2D_DRD_SWITCH:0,P2D_SWITCH:
0,AMR_F2D_OVERLAP_CELLUPT_SWITCH:
0,SRB_RESET_RL_SETUP_SWITCH:
0,RLFAIL_RL_SETUP_SWITCH:
0,CS_RL_SETUP_SWITCH:
0,PS_RL_SETUP_SWITCH:
0,UE_SRB_RESET_SWITCH:
0,RL_RESTORE_SWITCH:
0,RNC_EFD_D2F_SWITCH:
1,RNC_RB_SCRI_NOT_DROP_SWITCH:
0,RRC_RECONN_SWITCH:
0,RRC_REPEAT_PFM_SWITCH:
1,F2D_NO_RSP_RRCREL_SWITCH:
0,CS_SETUP_P2D_SWITCH:
0,SYSHO_CIPHER_IE_SWITCH:
0,P2P_GTPU_NOT_CFG_SWITCH:
1,RB_SETUP_CIPHER_TIME_ADJ_SWITCH:
1,CS_PRI_MOD_NOT_INT_SWITCH:
0,RAB_SETUP_TMSI_REALLOC_BUF_SWITCH:
0,IU_FAULT_REL_PS_RES_SWITCH:
0,RB_RECFG_RL_REEST_SWITCH:
0,F2P_DT_MSG_BUFFER_SWITCH:
0,SCRI_COMPATIBLE_SWITCH:
0,GTPU_ERR_IND_DEF_SWITCH:
0,IUR_SRV_CELL_CHG_MACHS_RESET_SWITC
H:1,UL_INTEG_ALGO_COMPAT_SWITCH:0

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 100


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Optimiz BSC691 SET WRFD- Dynami Meaning:


ationSwi 0 URRCT 021101 c 1) PAGGING_NUM_CTRL_SWITCH
tch RLSWI WRFD- Channel
Maximum number of paging attempts in the RAN
TCH 010510 Configu
network when no response is received after a paging
ration
WRFD- message is sent.
Control
010651 (DCCC) 1: This switch is turned on. The paging message is
WRFD- sent for a maximum of 5 times.
3.4/6.8/1
140103 3.6/27.2 0: This switch is turned off. The paging message is
WRFD- Kbps sent for a maximum of 10 times.
040100 RRC 2) ASU_RL_RESET_SWITCH(Switch for RL
WRFD- Connect Reestablishment During Soft Handover)
010507 ion and Whether to trigger radio link (RL) reestablishment
Radio during a soft handover.
WRFD-
Access
140226 1: This switch is turned on. A UE sends a CELL
Bearer
WRFD- Establis UPDATE message to the RNC and subsequently the
020500 hment RNC reestablishes the RL for the UE when both of the
and following conditions are met:
WRFD-
010301 Release -The RNC is waiting for the UE's response to the
HSDPA ACTIVE SET UPDATE message.
WRFD-
0106150 over Iur -The RNC detects that downlink transmission on
2 signaling radio bearer (SRB2) is disconnected or the
Call
NodeB reports that all RLs for the UE are out of
WRFD- Reestabl
synchronization.
010801 ishment
0: This switch is turned off. The RNC does not
WRFD- Flow
reestablish the RL for the UE when the preceding
010802 Control
conditions are met.
WRFD- Rate 3) MC_RL_RESET_SWITCH(Switch for RL
011402 Negotiat Reestablishment During Meas Control)
WRFD- ion at
Admissi Whether to trigger RL reestablishment during
0106150 measurement control.
4 on
Control 1: This switch is turned on. A UE sends a CELL
UPDATE message to the RNC and subsequently the
Fast
RNC reestablishes the RL for the UE when both of the
Return
following conditions are met:
from
UMTS -The RNC has sent a MEASUREMENT CONTROL
to LTE message to the UE.
Enhance -The RNC detects that downlink transmission on
d Fast SRB2 is disconnected when the UE state is stable.
Dorman 0: This switch is turned off. The RNC does not
cy reestablish the RL for the UE when the preceding
Paging conditions are met.
UE in 4)
Idle, FD_PCH_REENTERSA_FORCE_RRC_REL_SWIT
CELL_P CH.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 101


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

CH, Whether to enable the RNC to release the RRC


URA_P connection of an EFD-capable UE that received an
CH SCRI message from the PS domain of the CN if the
State UE sends the RNC a CELL UPDATE message after
(Type 1) reentering a service area. When this switch is turned
Combin on, the RNC releases the RRC connection of such a
ation of UE in the preceding scenario. This solves the problem
One CS that a network becomes inaccessible when such a UE
Service reenters a service area.
and Two 1: This switch is turned on. The RNC directly releases
PS the RRC connection after receiving the CELL
Services UPDATE message from the Enhanced Fast
Intra Dormancy-capable that leaves and then reenters the
RNC service area.
Cell 0: This switch is turned off. The RNC processes the
Update CELL UPDATE message received from the Enhanced
Fast Dormancy-capable UE that leaves and then
Inter
reenters the service area.
RNC
Cell 5) UE_CRC_COMPATIBLE_SWITCH.
Update Whether the RNC normally releases connections
Encrypti when it detects failed cyclic redundancy check (CRC)
on on RB SETUP COMPLETE or RB
RECONFIGURATION COMPLETE messages
Combin
received from HSDPA UEs.
ation of
One CS 1: This switch is turned on. If the TACs added through
Service the MML command ADD UIMEITAC contain the
and TAC of this UE, and the TAC_FUNC parameter is set
Three to HSDPA_RB_Setup_Cmp_CRC, the RNC normally
PS releases the connections when it detects the failed
Services CRC. If either of the preceding conditions is not met,
the RNC abnormally releases the connections when it
detects the failed CRC.
0: This switch is turned off. The RNC abnormally
releases the connections when it detects the failed
CRC.
6) RNC_P2D_DRD_SWITCH.
Whether the RNC performs the directed retry decision
(DRD) when it receives a CELL UPDATE message
with the cause value "uplink data transmission" or "
paging response" during UEs' state transition from
CELL_PCH or URA_PCH to CELL_DCH.
1: This switch is turned on. The RNC performs the
DRD in the preceding scenario.
0: This switch is turned off. The RNC does not
perform the DRD in the preceding scenario.
7) P2D_SWITCH.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 102


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RNC switches a UE from the


CELL_PCH or URA_PCH state to the CELL_DCH
state when the following conditions are met:
The UE sends the RNC a CELL UPDATE message
with the cause value "uplink data transmission" or
"paging response."
The number of UEs on the FACH reaches the upper
limit or the UE is to set up a CS service but the
common channel is congested.
1: This switch is set to on. The RNC switches the UE
from the CELL_PCH or URA_PCH state to the
CELL_DCH state in the preceding scenario.
0: This switch is set to off. The RNC does not switch
the UE from the CELL_PCH or URA_PCH state to
the CELL_DCH state in the preceding scenario.
This parameter can be set in both the "SET
URRCTRLSWITCH" and "ADD
UCELLFACHCONGCTRL" commands. The value of
this parameter in the "ADD
UCELLFACHCONGCTRL" command prevails.
8) AMR_F2D_OVERLAP_CELLUPT_SWITCH
Whether the RNC proceeds with CS RAB setup in a
state transition from CELL_FACH to CELL_DCH if
the same UE reports a CELL UPDATE message with
the cause value "cell reselection" during the CS RAB
setup.
1: This switch is set to ON. The RNC rolls back the
CS RAB setup procedure without sending a response
message to the CN. The RNC proceeds with the RAB
assignment procedure after finishing the cell update
procedure.
0: This switch is set to off. The RNC rolls back the CS
RAB setup procedure and sends a RAB
ASSIGNMENT RESPONSE message to the CN,
which indicates a RAB assignment failure. The CS
service setup fails.
9) SRB_RESET_RL_SETUP_SWITCH
Whether the RNC reestablishes a radio link (RL)
when it detects an SRB reset reported on Layer 2 for
decreasing the number of UE call drops
1: This switch is turned on. The RNC reestablishes an
RL when it detects the SRB reset.
0: This switch is turned off. The RNC does not
reestablish an RL when it detects the SRB reset.
10) RLFAIL_RL_SETUP_SWITCH

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 103


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether active link re-establishment is allowed after


the radio link fails
1: This switch is turned on. Active link re-
establishment is allowed after the RNC receives a
RADIO LINK FAILURE INDICATION message and
the timer used to wait for a RADIO LINK RESTORE
INDICATION message from the NodeB expires.
0: This switch is turned off. Active link re-
establishment is not allowed after the RNC receives a
RADIO LINK FAILURE INDICATION message and
the timer used to wait for a RADIO LINK RESTORE
INDICATION message from the NodeB expires.
11) CS_RL_SETUP_SWITCH
Whether the RNC reestablishes a radio link (RL)
when SRBs of a CS service reset or all its RLs are out
of synchronization.
1: This switch is turned on. The RNC reestablishes an
RL in the preceding scenario.
0: This switch is turned off. The RNC does not
reestablish an RL in the preceding scenario.
12) PS_RL_SETUP_SWITCH
Whether PS services can trigger active link re-
establishment
1: This switch is turned on. PS services can trigger
active link re-establishment.
0: This switch is turned off. PS services cannot trigger
active link re-establishment.
13) UE_SRB_RESET_SWITCH
Whether the RNC reestablishes a radio link (RL)
when it receives a CELL UPDATE message carrying
SRB reset information.
1: This switch is turned on. The RNC does not release
the RRC connection and it reestablishes an RL.
0: This switch is turned off. The RNC releases the
RRC connection.
14) RL_RESTORE_SWITCH
Switch for the radio link restoration timer
1: This switch is turned on. If there are CS services
and the last radio link fails, the RNC waits for the
radio link to restore before the timer T313 expires.
0: This switch is turned off. If there are CS services
and the last radio link fails, the RNC waits for the
radio link to restore before the original timer expires.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 104


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

15) RNC_EFD_D2F_SWITCH
Whether to enable RNC-level UE state transition from
CELL_DCH to CELL_FACH (D2F) for fast
dormancy-capable UEs.
1: This switch is turned on. The D2F state transition is
enabled for the fast dormancy-capable UEs..
0: This switch is turned off. The state transition from
CELL_DCH to CELL_PCH (D2P) is enabled for the
fast dormancy-capable UEs
16) RNC_RB_SCRI_NOT_DROP_SWITCH
Whether the RB release due to SCRI during RB
reconfiguration is calculated as a call drop
1: This switch is turned on. The RB release due to
SCRI during reconfiguration is not calculated as a call
drop.
0: This switch is turned off. The RB release due to
SCRI during reconfiguration is calculated as a call
drop.
17) RRC_RECONN_SWITCH
Switch for the RNC to process the RRC connection
setup requests from a UE.
1: This switch is turned on. The RNC releases the
established RRC connection when the UE retransmits
RRC connection setup requests.
0: This switch is turned off. When the UE retransmits
the RRC connection setup request to access the same
cell, the RNC rejects the new RRC connection setup
requests. When the UE retransmits the RRC
connection setup request to access different cells, the
RNC releases the established RRC connection.
It is recommended that this parameter be set to its
default value and the parameter value be not changed.
If you need to change the value of this parameter, ask
for assistance from Huawei technical support
personnel.
18) RRC_REPEAT_PFM_SWITCH
Whether the RNC counts the number of retransmitted
RRC connection setup requests in the measurement of
the RRC.AttConnEstab.Reg and
RRC.AttConnEstab.Detac performance counters.
1: This switch is turned on. The RNC counts the
number of retransmitted RRC connection setup
requests in the measurement of the two preceding
performance counters.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 105


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. The RNC does not count


the number of retransmitted RRC connection setup
requests in the measurement of the two preceding
performance counters.
19) F2D_NO_RSP_RRCREL_SWITCH
Whether the RNC releases the RRC connection of a
UE if the UE does not respond to the RNC after its
three failed attempts at the state transition from
CELL_FACH to CELL_DCH.
1: This switch is turned on. The RRC connection is
released with the cause "User Inactive" after the UE
fails in the state transition from CELL_FACH to
CELL_DCH for three times. The connection release is
measured in the VS.RAB.Rel.PS.F2DNoRsp counter.
0: This switch is turned off. The RRC connection is
not released after the UE fails in the state transition
from CELL_FACH to CELL_DCH three times, and
the UE remains in the CELL_FACH state.
20) CS_SETUP_P2D_SWITCH
Whether a UE in the CELL_PCH or URA_PCH state
preferentially performs a state transition from
CELL_PCH or URA_PCH to CELL_DCH or
CELL_FACH before initiating a CS service.
1: This switch is turned on. The RNC first performs a
state transition from CELL_PCH or URA_PCH to
CELL_DCH and then initiates the CS service.
0: This switch is turned off. The UE first performs a
state transition from CELL_PCH or URA_PCH to
CELL_FACH and then initiates the CS service.
21) SYSHO_CIPHER_IE_SWITCH
Whether the relocation command sent from a UMTS
network to an unencrypted GSM network carries the
UEA0 encryption information element (IE) when a
UE complying with 3GPP Release 6 or later is handed
over from the GSM network to the UMTS network.
1: This switch is turned on. The relocation command
does not carry any encryption IE.
0: This switch is turned off. The relocation command
carries the UEA0 encryption IE.
22) P2P_GTPU_NOT_CFG_SWITCH
Whether to reconfigure the GPRS Tunneling Protocol
User plane (GTP-U) when a UE in the CELL_PCH
state performs a cell update.
1: This switch is turned on. The GTP-U is not
reconfigured in the preceding scenario.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 106


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. The GTP-U is


reconfigured in the preceding scenario.
23) RB_SETUP_CIPHER_TIME_ADJ_SWITCH
Whether the RNC adjusts the activation time for
encryption parameters based on an RB SETUP
COMPLETE message
1: This switch is turned on. The RNC does not adjust
the activation time for encryption parameters as long
as the difference between the activation times
specified in an RB SETUP COMPLETE message and
in the corresponding RB SETUP message is smaller
than 200 connection frame numbers (CFNs).
0: This switch is turned off. The RNC always adjusts
the activation time for encryption parameters based on
an RB SETUP COMPLETE message, regardless of
the preceding difference.
24) CS_PRI_MOD_NOT_INT_SWITCH
Whether the RNC re-initiates CS services upon
receiving a RAB ASSIGNMENT REQUEST message
in which only the CS allocation/retention priority
(CARP) is changed.
1: This switch is turned on. The RNC does not re-
initiate CS services, which prevents CS call drops.
0: This switch is turned off. The RNC re-initiates CS
services, which results in CS call drops.
25)
RAB_SETUP_TMSI_REALLOC_BUF_SWITCH
Whether the RNC buffers a TMSI REALLOCATION
COMMAND message received during an RAB setup.
1: This switch is turned on. The RNC buffers the
TMSI REALLOCATION COMMAND message
received during the RAB setup and then forwards the
message to a UE after the RAB setup.
0: This switch is turned off. The RNC does not buffer
the TMSI REALLOCATION COMMAND message
received during the RAB setup. The RNC directly
forwards the message to a UE.
26) IU_FAULT_REL_PS_RES_SWITCH
Whether an UCP subsystem sends a PS service release
message to an Iu-PS interface board in case of a faulty
IP path, a faulty Signaling Connection Control Part
(SCCP) link, or a reset on the Iu interface
1: This switch is turned on. The UCP subsystem sends
the PS service release message to the Iu-PS interface
board.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 107


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. The UCP subsystem does


not send any PS service release message to the Iu-PS
interface board.
27) RB_RECFG_RL_REEST_SWITCH
Whether the RNC initiates radio link (RL)
reestablishment during a radio bearer (RB)
reconfiguration when the RNC detects that a signaling
radio bearer (SRB) is reset or all RLs for a UE are out
of synchronization
1: This switch is turned on. The RNC initiates RL
reestablishment during the RB reconfiguration.
0: This switch is turned off. The RNC does not initiate
RL reestablishment during the RB reconfiguration.
28) F2P_DT_MSG_BUFFER_SWITCH
Whether the RNC buffers a DIRECT TRANSFER
message received from the CN and sends a PAGING
message after the RNC receives a RADIO BEARER
RECONFIGURATION COMPLETE message from a
UE moving from the CELL_FACH to CELL_PCH
state (F2P for short)
1: This switch is turned on. The RNC buffers the
DIRECT TRANSFER message and sends the
PAGING message to the UE.
0: This switch is turned off. The RNC does not buffer
the DIRECT TRANSFER message.
29) SCRI_COMPATIBLE_SWITCH
Whether the RNC performs compatibility processing
upon receiving a Signalling Connection Release
Indication message with the cause value "UE
Requested PS Data Session End" when CS+PS
combined services are performed.
1: This switch is turned on. The RNC performs
compatibility processing. It sends an RB RELEASE
message containing the Signalling Connection Release
Indication information element (IE) to instruct a UE to
release the signaling connection in the corresponding
domain.
0: This switch is turned off. The RNC does not
perform compatibility processing and it discards the
SCRI message.
30) GTPU_ERR_IND_DEF_SWITCH
Whether the RNC measures the number of call drops
when it receives a GTPU Error Indication message
pertaining to a UE from the CN and releases the RRC
connection.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 108


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is turned on. The RNC does not


measure the number of call drops in the preceding
scenario.
0: This switch is turned off. The RNC measures the
number of call drops when releasing PS services.
31)
IUR_SRV_CELL_CHG_MACHS_RESET_SWITCH
Whether the RNC contains the MAC-hs reset
indicator information element (IE) in the PHYSICAL
CHANNEL RECONFIGURATION and RADIO
BEARER RECONFIGURATION messages for a reset
of the MAC-hs entity. The two messages are sent to a
UE when a service link over the Iur interface changes.
1: This switch is turned on. The RNC contains the
MAC-hs reset indicator IE in the two preceding
messages.
0: This switch is turned off. The RNC does not
contain the MAC-hs reset indicator IE in the two
preceding messages.
32) UL_INTEG_ALGO_COMPAT_SWITCH(UL
Integrity Compatibility Optimization Switch)
Reserved switch for security mode compatibility
handling. The bit field value is not internally used in
this version.
GUI Value Range:
PAGGING_NUM_CTRL_SWITCH,
ASU_RL_RESET_SWITCH,
MC_RL_RESET_SWITCH,
FD_PCH_REENTERSA_FORCE_RRC_REL_SWIT
CH, UE_CRC_COMPATIBLE_SWITCH,
RNC_P2D_DRD_SWITCH, P2D_SWITCH,
AMR_F2D_OVERLAP_CELLUPT_SWITCH,
SRB_RESET_RL_SETUP_SWITCH,
RLFAIL_RL_SETUP_SWITCH,
CS_RL_SETUP_SWITCH,
PS_RL_SETUP_SWITCH,
UE_SRB_RESET_SWITCH,
RL_RESTORE_SWITCH,
RNC_EFD_D2F_SWITCH,
RNC_RB_SCRI_NOT_DROP_SWITCH,
RRC_RECONN_SWITCH,
RRC_REPEAT_PFM_SWITCH,
F2D_NO_RSP_RRCREL_SWITCH,
CS_SETUP_P2D_SWITCH,
SYSHO_CIPHER_IE_SWITCH,
P2P_GTPU_NOT_CFG_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 109


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

RB_SETUP_CIPHER_TIME_ADJ_SWITCH,
CS_PRI_MOD_NOT_INT_SWITCH,
RAB_SETUP_TMSI_REALLOC_BUF_SWITCH,
IU_FAULT_REL_PS_RES_SWITCH,
RB_RECFG_RL_REEST_SWITCH,
F2P_DT_MSG_BUFFER_SWITCH,
SCRI_COMPATIBLE_SWITCH,
GTPU_ERR_IND_DEF_SWITCH,
IUR_SRV_CELL_CHG_MACHS_RESET_SWITCH,
UL_INTEG_ALGO_COMPAT_SWITCH
Unit: None
Actual Value Range:
PAGGING_NUM_CTRL_SWITCH,
ASU_RL_RESET_SWITCH,
MC_RL_RESET_SWITCH,
FD_PCH_REENTERSA_FORCE_RRC_REL_SWIT
CH,
UE_CRC_COMPATIBLE_SWITCH,
RNC_P2D_DRD_SWITCH,
P2D_SWITCH,
AMR_F2D_OVERLAP_CELLUPT_SWITCH,
SRB_RESET_RL_SETUP_SWITCH,
RLFAIL_RL_SETUP_SWITCH,
CS_RL_SETUP_SWITCH,
PS_RL_SETUP_SWITCH,
UE_SRB_RESET_SWITCH,
RL_RESTORE_SWITCH,
RNC_EFD_D2F_SWITCH,
RNC_RB_SCRI_NOT_DROP_SWITCH,
RRC_RECONN_SWITCH,
RRC_REPEAT_PFM_SWITCH,
F2D_NO_RSP_RRCREL_SWITCH,
CS_SETUP_P2D_SWITCH,
SYSHO_CIPHER_IE_SWITCH,
P2P_GTPU_NOT_CFG_SWITCH,
RB_SETUP_CIPHER_TIME_ADJ_SWITCH,
CS_PRI_MOD_NOT_INT_SWITCH,
RAB_SETUP_TMSI_REALLOC_BUF_SWITCH,
IU_FAULT_REL_PS_RES_SWITCH,
RB_RECFG_RL_REEST_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 110


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

F2P_DT_MSG_BUFFER_SWITCH,
SCRI_COMPATIBLE_SWITCH,
GTPU_ERR_IND_DEF_SWITCH,
IUR_SRV_CELL_CHG_MACHS_RESET_SWITCH,
UL_INTEG_ALGO_COMPAT_SWITCH
Default Value: PAGGING_NUM_CTRL_SWITCH:
0,ASU_RL_RESET_SWITCH:
0,MC_RL_RESET_SWITCH:
0,FD_PCH_REENTERSA_FORCE_RRC_REL_SWI
TCH:0,UE_CRC_COMPATIBLE_SWITCH:
0,RNC_P2D_DRD_SWITCH:0,P2D_SWITCH:
0,AMR_F2D_OVERLAP_CELLUPT_SWITCH:
0,SRB_RESET_RL_SETUP_SWITCH:
0,RLFAIL_RL_SETUP_SWITCH:
0,CS_RL_SETUP_SWITCH:
0,PS_RL_SETUP_SWITCH:
0,UE_SRB_RESET_SWITCH:
0,RL_RESTORE_SWITCH:
0,RNC_EFD_D2F_SWITCH:
1,RNC_RB_SCRI_NOT_DROP_SWITCH:
0,RRC_RECONN_SWITCH:
0,RRC_REPEAT_PFM_SWITCH:
1,F2D_NO_RSP_RRCREL_SWITCH:
0,CS_SETUP_P2D_SWITCH:
0,SYSHO_CIPHER_IE_SWITCH:
0,P2P_GTPU_NOT_CFG_SWITCH:
1,RB_SETUP_CIPHER_TIME_ADJ_SWITCH:
1,CS_PRI_MOD_NOT_INT_SWITCH:
0,RAB_SETUP_TMSI_REALLOC_BUF_SWITCH:
0,IU_FAULT_REL_PS_RES_SWITCH:
0,RB_RECFG_RL_REEST_SWITCH:
0,F2P_DT_MSG_BUFFER_SWITCH:
0,SCRI_COMPATIBLE_SWITCH:
0,GTPU_ERR_IND_DEF_SWITCH:
0,IUR_SRV_CELL_CHG_MACHS_RESET_SWITC
H:1,UL_INTEG_ALGO_COMPAT_SWITCH:0

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 111


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

SuppIur BSC690 ADD WRFD- 3GPP Meaning: Indicating whether to support establishing
Cch 0 UNRNC 010101 R9 IUR-CCH between the RNC and the neighboring
MOD WRFD- Specific RNC.
UNRNC 010802 ations GUI Value Range: NO, YES
WRFD- Inter Unit: None
010902 RNC
Cell Actual Value Range: NO, YES
WRFD- Update Default Value: NO
0206050
3 Inter
RNC
WRFD- URA
0206050 Update
1
SRNS
Relocati
on with
Cell/UR
A
Update
SRNS
Relocati
on (UE
Not
Involved
)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 112


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

SuppIur BSC691 ADD WRFD- 3GPP Meaning: Indicating whether to support establishing
Cch 0 UNRNC 010101 R9 IUR-CCH between the RNC and the neighboring
MOD WRFD- Specific RNC.
UNRNC 010802 ations GUI Value Range: NO, YES
WRFD- Inter Unit: None
010902 RNC
Cell Actual Value Range: NO, YES
WRFD- Update Default Value: NO
0206050
3 Inter
RNC
WRFD- URA
0206050 Update
1
SRNS
Relocati
on with
Cell/UR
A
Update
SRNS
Relocati
on (UE
Not
Involved
)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 113


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Optimiz BSC690 SET WRFD- Intra Meaning:


ationSwi 0 URRCT 010901 RNC 1)SYS_RELOC_OUT_SUCC_STAT_OPT_SWITCH
tch3 RLSWI WRFD- URA
TCH Update Whether the RNC measures one successful handover
0106100 or relocation when receiving an Iu release command
6 HSDPA message with the cause value "Network Optimization"
WRFD- Mobility from the CN during an outgoing relocation or
020203 Manage outgoing inter-RAT handover procedure.
ment
WRFD- 1: This switch is turned on. The RNC measures one
010902 Inter successful handover or relocation.
RNC
WRFD- Soft 0: This switch is turned off. The RNC measures one
010101 Handov failed handover or relocation.
WRFD- er 2)RL_REEST_PS_ON_FACH_SWITCH
010510 Inter Whether PS services are established on the FACH
WRFD- RNC upon call reestablishment.
020202 URA 1: This switch is turned on. PS services are established
WRFD- Update on the FACH upon a call reestablishment triggered by
010801 3GPP either of the following factors:
WRFD- R9 - All downlink radio links for a UE are out of
010802 Specific synchronization.
ations
- The SRB over the Uu interface is reset.
3.4/6.8/1
0: This switch is turned off. PS services are
3.6/27.2
established on the DCH upon a call reestablishment
Kbps
triggered by either of the preceding factors.
RRC
Connect 3)CELLUPDATE_MEASUREMENT_OPT_SWITC
ion and H
Radio Whether the RNC repeatedly calculates the number of
Access cell update attempts.
Bearer
A UE sends a CELL UPDATE message in cell 1 and
Establis
then sends another in cell 2 before receiving a CELL
hment
UPDATE CONFIRM message from the RNC or
and
responding to the CELL UPDATE CONFIRM
Release
message. The UE completes the cell update procedure
Intra in cell 2.
RNC
In the preceding scenario,
Soft
Handov 1: This switch is turned on. The RNC measures one
er cell update attempt only.
Intra 0: This switch is turned off. The RNC repeatedly
RNC measures cell update attempts.
Cell 4)D2F_PROCEDURE_OPTIMIZATION_SWITCH
Update Whether the optimized D2F procedure takes effect.
Inter 1: This switch is turned on. An expired D2F procedure
RNC is considered as successful if either of the following
conditions is met:

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 114


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Cell - The RB reconfiguration message is sent in


Update unacknowledged mode (UM), and all the RLs in the
active set receive an RL Fail indication.
- The RB reconfiguration message is sent in the
acknowledged mode (AM), and an ACK response is
received from the UE.
If neither of the preceding conditions is met, the D2F
procedure is considered as expired.
0: This switch is turned off. The optimized D2F
procedure does not take effect.
This switch is set to 0 by default.
5)F2D_PROCEDURE_OPTIMIZATION_SWITCH
Whether the optimized F2D procedure takes effect.
1: This switch is turned on. An expired F2D procedure
is considered as successful if the RL status is normal.
If the RL status is not normal, the F2D procedure is
considered as expired.
0: This switch is turned off. The optimized F2D
procedure does not take effect.
This switch is set to 0 by default.
6)FOREVER_PCH_CTRL_PLANE_SHARE_OPT
1: This switch is turned on. Load sharing of UEs in
the CELL_PCH state is not triggered among SPU
subsystems and the UEs in the CELL_PCH state are
periodically released on this SPU subsystem if the
following conditions are met:
- The CPU usage of the SPU subsystem exceeds a
specified threshold and exceeds the average CPU
usage of the SPU subsystems under the RNC.
- The number of online UEs in the CELL_PCH state
on this SPU subsystem exceeds the average number of
UEs in the CELL_PCH state on the SPU subsystems
under the RNC.
0: This switch is turned off. Load sharing of UEs in
the CELL_PCH state is triggered among SPU
subsystems if the following conditions are met:
- The CPU usage of the SPU subsystem exceeds a
specified threshold and exceeds the average CPU
usage of the SPU subsystems under the RNC.
- The number of online UEs in the CELL_PCH state
on this SPU subsystem exceeds the average number of
UEs in the CELL_PCH state on the SPU subsystems
under the RNC.
7)FOREVER_PCH_USER_PLANE_SHARE_OPT

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 115


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is turned on. The RNC selects another


DSP to perform load sharing on the user plane when
always online users are activated.
0: This switch is turned off. The RNC does not
perform load sharing on the user plane when always
online users are activated.
8)RAB_REL_SRV_CELL_CHG_CROSS_SWITCH
Whether the serving cell change procedure is allowed
during the release of all PS RABs.
1: This switch is turned on. The serving cell change
procedure is not allowed during the release of all PS
RABs.
0: This switch is turned off. The serving cell change
procedure is allowed during the release of all PS
RABs.
9)SCRIWITHCAUSE_OVERLAP_SWITCH
How the RNC will react if it receives an SCRI
message with the cause value "UE Requested PS Data
session end" in the middle of another procedure.
1: This switch is turned on. The RNC maintains the
original RRC state and does not release the connection
of the related UE if the RNC receives an SCRI
message with the preceding cause value in the middle
of another procedure.
0: This switch is turned off. The RNC releases the
connection of the UE if both of the following
conditions are met:
The RNC receives an SCRI message with the
preceding cause value in the middle of another
procedure.
The TAC of the UE does not belong to the TACs that
are enabled with fast dormancy.
10)P2F_CUC_REPEAT_SWITCH
Whether the RNC retransmits a CELL UPDATE
CONFIRM message to a UE that is transitioning from
the CELL_PCH or URA_PCH state to the
CELL_FACH state.
1: This switch is turned on. The RNC retransmits a
CELL UPDATE CONFIRM message to a UE that is
transitioning from the CELL_PCH or URA_PCH state
to the CELL_FACH state.
0: This switch is turned off. The RNC does not
retransmit a CELL UPDATE CONFIRM message to a
UE that is transitioning from the CELL_PCH or
URA_PCH state to the CELL_FACH state.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 116


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

11)UU_ABN_REL_INFO_NOTIFY_NODEB_SWIT
CH
Whether to notify the NodeB of the abnormal RL
release due to poor Uu interface quality.
1: This switch is turned on. The RNC notifies the
NodeB of the abnormal RL release due to poor Uu
interface quality.
0: This switch is turned off. The RNC does not notify
the NodeB of the abnormal RL release due to poor Uu
interface quality.
12)D2F_AM_PROCEDURE_OPTIMIZATION_SWI
TCH
Whether the RNC considers the D2F state transition
as successful if the RNC does not receive a response
message from the UE within the specified period after
sending a RADIO BEARER RECONFIGURTION
message to the UE in acknowledged mode (AM).
1: This switch is turned on. The RNC considers the
D2F state transition as successful if the following
conditions are met:
The RNC does not receive a response from the UE
within the specified period after sending a RADIO
BEARER RECONFIGURATION message to the UE
in AM.
All radio links (RLs) for the UE are out of
synchronization.
The RLCs for all TRBs are in AM.
If any of the preceding conditions is not met, the RNC
undoes the D2F state transition.
0: This switch is turned off. The RNC undoes the D2F
state transition if the RNC does not receive a response
from the UE within the specified period after sending
a RADIO BEARER RECONFIGURATION message
to the UE in AM.
13)AM_D2F_F2D_RESTMR_OPTIMIZATION_SWI
TCH (Response Timer Optimization Switch for D2F
and F2D Procedures in AM)
Length policy for the timer set for the RNC to wait for
a response message from the UE after the RNC sends
a RADIO BEARER RECONFIGURATION message
to the UE in AM during the D2F and F2D state
transitions.
1: This switch is turned on. The length of the timer
equals its configured value (value of the

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 117


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

"RbRecfgRspTmr" parameter in the "SET


USTATETIMER" command) plus four seconds.
0: This switch is turned off. The length of this timer
equals its configured value.
14)D2P_DT_MSG_BUFFER_SWITCH (DT Message
Buffer Switch During D2P)
Whether the RNC buffers the DIRECT TRANSFER
message sent by the CN during the D2P state
transition.
1: This switch is turned on. The RNC buffers the
DIRECT TRANSFER message. The RNC sends a
paging message to the UE after the D2P state
transition is complete and then sends the buffered
DIRECT TRANSFER message to the UE.
0: This switch is turned off. The RNC forwards the
DIRECT TRANSFER message to the UE
immediately after receiving it.
15)CM_CODE_CONFLICT_OPT_SWITCH
Used to solve code resource conflicts in compressed
mode.
1: This switch is turned on. Code resource conflicts in
compressed mode are solved.
0: This switch is turned off. Code resource conflicts in
compressed mode are not solved.
16)H_SERV_CELL_CHANGE_MSG_OPT_SWITC
H(Enable H Serving Cell Change MSG Size
Reduction)
Whether to reduce the size of the HSDPA serving cell
change message.
1: This switch is turned on. The size of the HSDPA
serving cell change message is reduced.
0: This switch is turned off. The size of the HSDPA
serving cell change message is not reduced.
17)FAST_HSDPA_SERV_CELL_CHANGE_SWITC
H (Fast HSDPA Serving Cell Change Optimization
Switch)
Whether to enable the fast HSDPA serving cell change
optimization function.
1: This switch is turned on. The RNC includes the IE
Delay restriction flag in the PHYSICAL CHANNEL
RECONFIGURATION message. For details about the
IE Delay restriction flag, see section 10.2.22 in 3GPP
TS25.331.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 118


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. The RNC does not


include the IE Delay restriction flag in the
PHYSICAL CHANNEL RECONFIGURATION
message.
18)RLRST_ASU_SUCC_COUNTERS_CORRECT_
SWITCH(SHO Counting Correction Switch in RL
Reestablish)
When the RL reestablishment function is enabled, a
soft handover procedure is considered as successful
even if the ASU CMP message is not received if RL
reestablishment is triggered during the soft handover.
This parameter specifies whether to correct the
counting of successful soft handovers when RL
reestablishment is triggered during the soft handover.
1: This switch is turned on. Such a soft handover
procedure is considered as failed.
0: This switch is turned off. Such a soft handover
procedure is considered as successful.
19)COUNT_STATE_CHG_BY_RAB_EHN_SWITC
H
Whether to enable certain state transition-related
counters to be incremented on a PS RAB basis. These
counters include the VS.DCCC.P2D.Att,
VS.DCCC.P2D.Succ, VS.DCCC.Att.D2U, and
VS.DCCC.Succ.D2U counters.
1: This switch is turned on. These counters are
incremented on a PS RAB basis.
0: This switch is turned off. These counters are
incremented on a UE basis.
20)RAB_RELATED_COUNTER_OPT_SWITCH(R
AB Setup Failure Statistical Optimization Switch)
Whether to optimize the statistics of counters
measuring RAB setup failures and abnormal RAB
releases.
1: This switch is turned on. Under this circumstance,
the statistics of counters measuring RAB setup
failures and abnormal RAB releases are optimized.
0: This switch is turned off. Under this circumstance,
the statistics of counters measuring RAB setup
failures and abnormal RAB releases are not
optimized.
21)CELLUPDATE_PROCEDURE_OPT_SWITCH
(Cell Update Procedure Optimization Switch)
Whether to enable the optimized processing for the
cell update procedure.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 119


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is set to on.


The RNC supports the overlapping of these two
procedures: cell update procedure caused by RL
failure and P2D/D2P/D2F state transition procedure.
For UEs in the CELL_DCH state, the RNC performs a
cell update procedure based on the retransmitted
CELL UPDATE message if the retransmitted message
carries an SRB or TRB reset indication.
For UEs in the CELL_PCH or URA_PCH state, when
the number of CELL UPDATE messages with the
cause value paging response or UL data transmission
exceeds the value specified by N381, the RNC sends
an RRC connection release message to the UE in the
cell where the UE sends the last CELL UPDATE
message. For UEs in states other than CELL_DCH or
in the middle of state transitions other than P2D, if the
SRNC receives a CELL UPDATE message with
HRNTI from a UE through the DRNC while waiting
for the UE's response to the CELL UPDATE
CONFIRM message, the SRNC considers the message
as a retransmitted one.
0: This switch is set to off. The optimized processing
for the cell update procedure is not supported.
22)PTT_PAGING_PRD_CRRCT_SWITCH(Correct
the Paging Retransmission for PTT Services over Uu)
Whether to correct the retransmission period of paging
messages for push to talk (PTT) services over the Uu
interface.
1: This switch is set to on, the retransmission period of
PTT services is corrected. That is, if the RNC does not
receive a paging response within 320 ms after sending
a paging message, the RNC retransmits the paging
message.
0: This switch is set to off, the retransmission period
of PTT services is not corrected. That is, the RNC
retransmits a paging message only when it does not
receive a paging response within 640 ms after sending
a paging message.
23)RRC_REL_STATUS_RSP_RAB_ASS_REQ_SWI
TCH (Respond to RAB Assignment Request upon
RRC Release)
Whether the RNC processes the RAB ASSIGNMENT
REQUEST message and returns a RAB
ASSIGNMENT RESPONSE message to the CN in
the following scenario: After receiving a RAB
RELEASE REQUEST message from the RNC to

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 120


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

release the last RAB of a UE, the CN does not return


an IU RELEASE COMMAND message but returns a
RAB ASSIGNMENT REQUEST instead.
1: This switch is set to on. The RNC processes the
RAB ASSIGNMENT REQUEST message and returns
a RAB ASSIGNMENT RESPONSE message to the
CN in the preceding scenario.
0: This switch is set to off. The RNC does not process
the RAB ASSIGNMENT REQUEST message in the
preceding scenario.
24)L2U_UP_DELAY_OPT_SWITCH (L2U UP
Delay Optimization Switch)
Whether the RNC returns a RELOCATION
COMPLETE message to the CN to start UP data
transmission immediately after receiving a
HANDOVER TO UTRAN COMPLETE message
during a LTE-to-UMTS handover.
1: This switch is set to on. The RNC immediately
returns a RELOCATION COMPLETE message to the
CN in the preceding scenario.
0: This switch is set to off. After the RNC queries the
UE's capability and the security mode procedure is
complete, the RNC returns a RELOCATION
COMPLETE message to the CN.
25)PRI_LDR_SYSHO_OUT_USE_SELECT_OPT_S
WITCH (Optimize UE Selection for Outgoing Inter-
RAT Handover in Basic Congestion)
Whether the LDR algorithm on the RNC side updates
the attribute of outgoing inter-RAT handover for a UE
after an F2D, P2D, or D2D state transition procedure.
1: This switch is set to on. The LDR algorithm on the
RNC side updates the attribute of outgoing inter-RAT
handover for a UE after an F2D, P2D, or D2D state
transition procedure. In this way, the LDR algorithm
on the RNC side can select appropriate UEs for
outgoing inter-RAT handovers when the cell is in
basic congestion state.
0: This switch is set to off. The LDR algorithm on the
RNC side does not update the attribute of outgoing
inter-RAT handover for a UE after an F2D, P2D, or
D2D state transition procedure.
GUI Value Range:
SYS_RELOC_OUT_SUCC_STAT_OPT_SWITCH,
RL_REEST_PS_ON_FACH_SWITCH,
CELLUPDATE_MEASUREMENT_OPT_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 121


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

D2F_PROCEDURE_OPTIMIZATION_SWITCH,
F2D_PROCEDURE_OPTIMIZATION_SWITCH,
FOREVER_PCH_CTRL_PLANE_SHARE_OPT,
FOREVER_PCH_USER_PLANE_SHARE_OPT,
RAB_REL_SRV_CELL_CHG_CROSS_SWITCH,
SCRIWITHCAUSE_OVERLAP_SWITCH,
P2F_CUC_REPEAT_SWITCH,
UU_ABN_REL_INFO_NOTIFY_NODEB_SWITCH
,
D2F_AM_PROCEDURE_OPTIMIZATION_SWITC
H,
AM_D2F_F2D_RESTMR_OPTIMIZATION_SWITC
H, D2P_DT_MSG_BUFFER_SWITCH,
CM_CODE_CONFLICT_OPT_SWITCH,
H_SERV_CELL_CHANGE_MSG_OPT_SWITCH,
FAST_HSDPA_SERV_CELL_CHANGE_SWITCH,
RLRST_ASU_SUCC_COUNTERS_CORRECT_SW
ITCH,
COUNT_STATE_CHG_BY_RAB_EHN_SWITCH,
RAB_RELATED_COUNTER_OPT_SWITCH,
CELLUPDATE_PROCEDURE_OPT_SWITCH,
PTT_PAGING_PRD_CRRCT_SWITCH,
RRC_REL_STATUS_RSP_RAB_ASS_REQ_SWITC
H, L2U_UP_DELAY_OPT_SWITCH,
PRI_LDR_SYSHO_OUT_USE_SELECT_OPT_SWI
TCH
Unit: None
Actual Value Range:
SYS_RELOC_OUT_SUCC_STAT_OPT_SWITCH,
RL_REEST_PS_ON_FACH_SWITCH,
CELLUPDATE_MEASUREMENT_OPT_SWITCH,
D2F_PROCEDURE_OPTIMIZATION_SWITCH,
F2D_PROCEDURE_OPTIMIZATION_SWITCH,
FOREVER_PCH_CTRL_PLANE_SHARE_OPT,
FOREVER_PCH_USER_PLANE_SHARE_OPT,
RAB_REL_SRV_CELL_CHG_CROSS_SWITCH,
SCRIWITHCAUSE_OVERLAP_SWITCH,
P2F_CUC_REPEAT_SWITCH,
UU_ABN_REL_INFO_NOTIFY_NODEB_SWITCH
,
D2F_AM_PROCEDURE_OPTIMIZATION_SWITC
H,
AM_D2F_F2D_RESTMR_OPTIMIZATION_SWITC
H,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 122


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

D2P_DT_MSG_BUFFER_SWITCH,
CM_CODE_CONFLICT_OPT_SWITCH,
H_SERV_CELL_CHANGE_MSG_OPT_SWITCH,
FAST_HSDPA_SERV_CELL_CHANGE_SWITCH,
RLRST_ASU_SUCC_COUNTERS_CORRECT_SW
ITCH,
COUNT_STATE_CHG_BY_RAB_EHN_SWITCH,
RAB_RELATED_COUNTER_OPT_SWITCH,
CELLUPDATE_PROCEDURE_OPT_SWITCH,
PTT_PAGING_PRD_CRRCT_SWITCH,
RRC_REL_STATUS_RSP_RAB_ASS_REQ_SWITC
H,
L2U_UP_DELAY_OPT_SWITCH,
PRI_LDR_SYSHO_OUT_USE_SELECT_OPT_SWI
TCH
Default Value:
SYS_RELOC_OUT_SUCC_STAT_OPT_SWITCH:
1,RL_REEST_PS_ON_FACH_SWITCH:
0,CELLUPDATE_MEASUREMENT_OPT_SWITCH
:0,D2F_PROCEDURE_OPTIMIZATION_SWITCH:
0,F2D_PROCEDURE_OPTIMIZATION_SWITCH:
0,FOREVER_PCH_CTRL_PLANE_SHARE_OPT:
0,FOREVER_PCH_USER_PLANE_SHARE_OPT:
0,RAB_REL_SRV_CELL_CHG_CROSS_SWITCH:
0,SCRIWITHCAUSE_OVERLAP_SWITCH:
0,P2F_CUC_REPEAT_SWITCH:
0,UU_ABN_REL_INFO_NOTIFY_NODEB_SWITC
H:
1,D2F_AM_PROCEDURE_OPTIMIZATION_SWIT
CH:
0,AM_D2F_F2D_RESTMR_OPTIMIZATION_SWIT
CH:0,D2P_DT_MSG_BUFFER_SWITCH:
0,CM_CODE_CONFLICT_OPT_SWITCH:
1,H_SERV_CELL_CHANGE_MSG_OPT_SWITCH:
0,FAST_HSDPA_SERV_CELL_CHANGE_SWITCH
:
0,RLRST_ASU_SUCC_COUNTERS_CORRECT_S
WITCH:
0,COUNT_STATE_CHG_BY_RAB_EHN_SWITCH:
0,RAB_RELATED_COUNTER_OPT_SWITCH:
0,CELLUPDATE_PROCEDURE_OPT_SWITCH:
1,PTT_PAGING_PRD_CRRCT_SWITCH:
0,RRC_REL_STATUS_RSP_RAB_ASS_REQ_SWIT
CH:0,L2U_UP_DELAY_OPT_SWITCH:

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 123


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd
1,PRI_LDR_SYSHO_OUT_USE_SELECT_OPT_S
WITCH:0

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 124


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Optimiz BSC691 SET WRFD- Intra Meaning:


ationSwi 0 URRCT 010901 RNC 1)SYS_RELOC_OUT_SUCC_STAT_OPT_SWITCH
tch3 RLSWI WRFD- URA
TCH Update Whether the RNC measures one successful handover
0106100 or relocation when receiving an Iu release command
6 HSDPA message with the cause value "Network Optimization"
WRFD- Mobility from the CN during an outgoing relocation or
020203 Manage outgoing inter-RAT handover procedure.
ment
WRFD- 1: This switch is turned on. The RNC measures one
010902 Inter successful handover or relocation.
RNC
WRFD- Soft 0: This switch is turned off. The RNC measures one
010101 Handov failed handover or relocation.
WRFD- er 2)RL_REEST_PS_ON_FACH_SWITCH
010510 Inter Whether PS services are established on the FACH
WRFD- RNC upon call reestablishment.
020202 URA 1: This switch is turned on. PS services are established
WRFD- Update on the FACH upon a call reestablishment triggered by
010801 3GPP either of the following factors:
WRFD- R9 - All downlink radio links for a UE are out of
010802 Specific synchronization.
ations
- The SRB over the Uu interface is reset.
3.4/6.8/1
0: This switch is turned off. PS services are
3.6/27.2
established on the DCH upon a call reestablishment
Kbps
triggered by either of the preceding factors.
RRC
Connect 3)CELLUPDATE_MEASUREMENT_OPT_SWITC
ion and H
Radio Whether the RNC repeatedly calculates the number of
Access cell update attempts.
Bearer
A UE sends a CELL UPDATE message in cell 1 and
Establis
then sends another in cell 2 before receiving a CELL
hment
UPDATE CONFIRM message from the RNC or
and
responding to the CELL UPDATE CONFIRM
Release
message. The UE completes the cell update procedure
Intra in cell 2.
RNC
In the preceding scenario,
Soft
Handov 1: This switch is turned on. The RNC measures one
er cell update attempt only.
Intra 0: This switch is turned off. The RNC repeatedly
RNC measures cell update attempts.
Cell 4)D2F_PROCEDURE_OPTIMIZATION_SWITCH
Update Whether the optimized D2F procedure takes effect.
Inter 1: This switch is turned on. An expired D2F procedure
RNC is considered as successful if either of the following
conditions is met:

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 125


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Cell - The RB reconfiguration message is sent in


Update unacknowledged mode (UM), and all the RLs in the
active set receive an RL Fail indication.
- The RB reconfiguration message is sent in the
acknowledged mode (AM), and an ACK response is
received from the UE.
If neither of the preceding conditions is met, the D2F
procedure is considered as expired.
0: This switch is turned off. The optimized D2F
procedure does not take effect.
This switch is set to 0 by default.
5)F2D_PROCEDURE_OPTIMIZATION_SWITCH
Whether the optimized F2D procedure takes effect.
1: This switch is turned on. An expired F2D procedure
is considered as successful if the RL status is normal.
If the RL status is not normal, the F2D procedure is
considered as expired.
0: This switch is turned off. The optimized F2D
procedure does not take effect.
This switch is set to 0 by default.
6)FOREVER_PCH_CTRL_PLANE_SHARE_OPT
1: This switch is turned on. Load sharing of UEs in
the CELL_PCH state is not triggered among SPU
subsystems and the UEs in the CELL_PCH state are
periodically released on this SPU subsystem if the
following conditions are met:
- The CPU usage of the SPU subsystem exceeds a
specified threshold and exceeds the average CPU
usage of the SPU subsystems under the RNC.
- The number of online UEs in the CELL_PCH state
on this SPU subsystem exceeds the average number of
UEs in the CELL_PCH state on the SPU subsystems
under the RNC.
0: This switch is turned off. Load sharing of UEs in
the CELL_PCH state is triggered among SPU
subsystems if the following conditions are met:
- The CPU usage of the SPU subsystem exceeds a
specified threshold and exceeds the average CPU
usage of the SPU subsystems under the RNC.
- The number of online UEs in the CELL_PCH state
on this SPU subsystem exceeds the average number of
UEs in the CELL_PCH state on the SPU subsystems
under the RNC.
7)FOREVER_PCH_USER_PLANE_SHARE_OPT

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 126


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is turned on. The RNC selects another


DSP to perform load sharing on the user plane when
always online users are activated.
0: This switch is turned off. The RNC does not
perform load sharing on the user plane when always
online users are activated.
8)RAB_REL_SRV_CELL_CHG_CROSS_SWITCH
Whether the serving cell change procedure is allowed
during the release of all PS RABs.
1: This switch is turned on. The serving cell change
procedure is not allowed during the release of all PS
RABs.
0: This switch is turned off. The serving cell change
procedure is allowed during the release of all PS
RABs.
9)SCRIWITHCAUSE_OVERLAP_SWITCH
How the RNC will react if it receives an SCRI
message with the cause value "UE Requested PS Data
session end" in the middle of another procedure.
1: This switch is turned on. The RNC maintains the
original RRC state and does not release the connection
of the related UE if the RNC receives an SCRI
message with the preceding cause value in the middle
of another procedure.
0: This switch is turned off. The RNC releases the
connection of the UE if both of the following
conditions are met:
The RNC receives an SCRI message with the
preceding cause value in the middle of another
procedure.
The TAC of the UE does not belong to the TACs that
are enabled with fast dormancy.
10)P2F_CUC_REPEAT_SWITCH
Whether the RNC retransmits a CELL UPDATE
CONFIRM message to a UE that is transitioning from
the CELL_PCH or URA_PCH state to the
CELL_FACH state.
1: This switch is turned on. The RNC retransmits a
CELL UPDATE CONFIRM message to a UE that is
transitioning from the CELL_PCH or URA_PCH state
to the CELL_FACH state.
0: This switch is turned off. The RNC does not
retransmit a CELL UPDATE CONFIRM message to a
UE that is transitioning from the CELL_PCH or
URA_PCH state to the CELL_FACH state.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 127


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

11)UU_ABN_REL_INFO_NOTIFY_NODEB_SWIT
CH
Whether to notify the NodeB of the abnormal RL
release due to poor Uu interface quality.
1: This switch is turned on. The RNC notifies the
NodeB of the abnormal RL release due to poor Uu
interface quality.
0: This switch is turned off. The RNC does not notify
the NodeB of the abnormal RL release due to poor Uu
interface quality.
12)D2F_AM_PROCEDURE_OPTIMIZATION_SWI
TCH
Whether the RNC considers the D2F state transition
as successful if the RNC does not receive a response
message from the UE within the specified period after
sending a RADIO BEARER RECONFIGURTION
message to the UE in acknowledged mode (AM).
1: This switch is turned on. The RNC considers the
D2F state transition as successful if the following
conditions are met:
The RNC does not receive a response from the UE
within the specified period after sending a RADIO
BEARER RECONFIGURATION message to the UE
in AM.
All radio links (RLs) for the UE are out of
synchronization.
The RLCs for all TRBs are in AM.
If any of the preceding conditions is not met, the RNC
undoes the D2F state transition.
0: This switch is turned off. The RNC undoes the D2F
state transition if the RNC does not receive a response
from the UE within the specified period after sending
a RADIO BEARER RECONFIGURATION message
to the UE in AM.
13)AM_D2F_F2D_RESTMR_OPTIMIZATION_SWI
TCH (Response Timer Optimization Switch for D2F
and F2D Procedures in AM)
Length policy for the timer set for the RNC to wait for
a response message from the UE after the RNC sends
a RADIO BEARER RECONFIGURATION message
to the UE in AM during the D2F and F2D state
transitions.
1: This switch is turned on. The length of the timer
equals its configured value (value of the

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 128


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

"RbRecfgRspTmr" parameter in the "SET


USTATETIMER" command) plus four seconds.
0: This switch is turned off. The length of this timer
equals its configured value.
14)D2P_DT_MSG_BUFFER_SWITCH (DT Message
Buffer Switch During D2P)
Whether the RNC buffers the DIRECT TRANSFER
message sent by the CN during the D2P state
transition.
1: This switch is turned on. The RNC buffers the
DIRECT TRANSFER message. The RNC sends a
paging message to the UE after the D2P state
transition is complete and then sends the buffered
DIRECT TRANSFER message to the UE.
0: This switch is turned off. The RNC forwards the
DIRECT TRANSFER message to the UE
immediately after receiving it.
15)CM_CODE_CONFLICT_OPT_SWITCH
Used to solve code resource conflicts in compressed
mode.
1: This switch is turned on. Code resource conflicts in
compressed mode are solved.
0: This switch is turned off. Code resource conflicts in
compressed mode are not solved.
16)H_SERV_CELL_CHANGE_MSG_OPT_SWITC
H(Enable H Serving Cell Change MSG Size
Reduction)
Whether to reduce the size of the HSDPA serving cell
change message.
1: This switch is turned on. The size of the HSDPA
serving cell change message is reduced.
0: This switch is turned off. The size of the HSDPA
serving cell change message is not reduced.
17)FAST_HSDPA_SERV_CELL_CHANGE_SWITC
H (Fast HSDPA Serving Cell Change Optimization
Switch)
Whether to enable the fast HSDPA serving cell change
optimization function.
1: This switch is turned on. The RNC includes the IE
Delay restriction flag in the PHYSICAL CHANNEL
RECONFIGURATION message. For details about the
IE Delay restriction flag, see section 10.2.22 in 3GPP
TS25.331.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 129


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. The RNC does not


include the IE Delay restriction flag in the
PHYSICAL CHANNEL RECONFIGURATION
message.
18)RLRST_ASU_SUCC_COUNTERS_CORRECT_
SWITCH(SHO Counting Correction Switch in RL
Reestablish)
When the RL reestablishment function is enabled, a
soft handover procedure is considered as successful
even if the ASU CMP message is not received if RL
reestablishment is triggered during the soft handover.
This parameter specifies whether to correct the
counting of successful soft handovers when RL
reestablishment is triggered during the soft handover.
1: This switch is turned on. Such a soft handover
procedure is considered as failed.
0: This switch is turned off. Such a soft handover
procedure is considered as successful.
19)COUNT_STATE_CHG_BY_RAB_EHN_SWITC
H
Whether to enable certain state transition-related
counters to be incremented on a PS RAB basis. These
counters include the VS.DCCC.P2D.Att,
VS.DCCC.P2D.Succ, VS.DCCC.Att.D2U, and
VS.DCCC.Succ.D2U counters.
1: This switch is turned on. These counters are
incremented on a PS RAB basis.
0: This switch is turned off. These counters are
incremented on a UE basis.
20)RAB_RELATED_COUNTER_OPT_SWITCH(R
AB Setup Failure Statistical Optimization Switch)
Whether to optimize the statistics of counters
measuring RAB setup failures and abnormal RAB
releases.
1: This switch is turned on. Under this circumstance,
the statistics of counters measuring RAB setup
failures and abnormal RAB releases are optimized.
0: This switch is turned off. Under this circumstance,
the statistics of counters measuring RAB setup
failures and abnormal RAB releases are not
optimized.
21)CELLUPDATE_PROCEDURE_OPT_SWITCH
(Cell Update Procedure Optimization Switch)
Whether to enable the optimized processing for the
cell update procedure.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 130


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is set to on.


The RNC supports the overlapping of these two
procedures: cell update procedure caused by RL
failure and P2D/D2P/D2F state transition procedure.
For UEs in the CELL_DCH state, the RNC performs a
cell update procedure based on the retransmitted
CELL UPDATE message if the retransmitted message
carries an SRB or TRB reset indication.
For UEs in the CELL_PCH or URA_PCH state, when
the number of CELL UPDATE messages with the
cause value paging response or UL data transmission
exceeds the value specified by N381, the RNC sends
an RRC connection release message to the UE in the
cell where the UE sends the last CELL UPDATE
message. For UEs in states other than CELL_DCH or
in the middle of state transitions other than P2D, if the
SRNC receives a CELL UPDATE message with
HRNTI from a UE through the DRNC while waiting
for the UE's response to the CELL UPDATE
CONFIRM message, the SRNC considers the message
as a retransmitted one.
0: This switch is set to off. The optimized processing
for the cell update procedure is not supported.
22)PTT_PAGING_PRD_CRRCT_SWITCH(Correct
the Paging Retransmission for PTT Services over Uu)
Whether to correct the retransmission period of paging
messages for push to talk (PTT) services over the Uu
interface.
1: This switch is set to on, the retransmission period of
PTT services is corrected. That is, if the RNC does not
receive a paging response within 320 ms after sending
a paging message, the RNC retransmits the paging
message.
0: This switch is set to off, the retransmission period
of PTT services is not corrected. That is, the RNC
retransmits a paging message only when it does not
receive a paging response within 640 ms after sending
a paging message.
23)RRC_REL_STATUS_RSP_RAB_ASS_REQ_SWI
TCH (Respond to RAB Assignment Request upon
RRC Release)
Whether the RNC processes the RAB ASSIGNMENT
REQUEST message and returns a RAB
ASSIGNMENT RESPONSE message to the CN in
the following scenario: After receiving a RAB
RELEASE REQUEST message from the RNC to

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 131


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

release the last RAB of a UE, the CN does not return


an IU RELEASE COMMAND message but returns a
RAB ASSIGNMENT REQUEST instead.
1: This switch is set to on. The RNC processes the
RAB ASSIGNMENT REQUEST message and returns
a RAB ASSIGNMENT RESPONSE message to the
CN in the preceding scenario.
0: This switch is set to off. The RNC does not process
the RAB ASSIGNMENT REQUEST message in the
preceding scenario.
24)L2U_UP_DELAY_OPT_SWITCH (L2U UP
Delay Optimization Switch)
Whether the RNC returns a RELOCATION
COMPLETE message to the CN to start UP data
transmission immediately after receiving a
HANDOVER TO UTRAN COMPLETE message
during a LTE-to-UMTS handover.
1: This switch is set to on. The RNC immediately
returns a RELOCATION COMPLETE message to the
CN in the preceding scenario.
0: This switch is set to off. After the RNC queries the
UE's capability and the security mode procedure is
complete, the RNC returns a RELOCATION
COMPLETE message to the CN.
25)PRI_LDR_SYSHO_OUT_USE_SELECT_OPT_S
WITCH (Optimize UE Selection for Outgoing Inter-
RAT Handover in Basic Congestion)
Whether the LDR algorithm on the RNC side updates
the attribute of outgoing inter-RAT handover for a UE
after an F2D, P2D, or D2D state transition procedure.
1: This switch is set to on. The LDR algorithm on the
RNC side updates the attribute of outgoing inter-RAT
handover for a UE after an F2D, P2D, or D2D state
transition procedure. In this way, the LDR algorithm
on the RNC side can select appropriate UEs for
outgoing inter-RAT handovers when the cell is in
basic congestion state.
0: This switch is set to off. The LDR algorithm on the
RNC side does not update the attribute of outgoing
inter-RAT handover for a UE after an F2D, P2D, or
D2D state transition procedure.
GUI Value Range:
SYS_RELOC_OUT_SUCC_STAT_OPT_SWITCH,
RL_REEST_PS_ON_FACH_SWITCH,
CELLUPDATE_MEASUREMENT_OPT_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 132


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

D2F_PROCEDURE_OPTIMIZATION_SWITCH,
F2D_PROCEDURE_OPTIMIZATION_SWITCH,
FOREVER_PCH_CTRL_PLANE_SHARE_OPT,
FOREVER_PCH_USER_PLANE_SHARE_OPT,
RAB_REL_SRV_CELL_CHG_CROSS_SWITCH,
SCRIWITHCAUSE_OVERLAP_SWITCH,
P2F_CUC_REPEAT_SWITCH,
UU_ABN_REL_INFO_NOTIFY_NODEB_SWITCH
,
D2F_AM_PROCEDURE_OPTIMIZATION_SWITC
H,
AM_D2F_F2D_RESTMR_OPTIMIZATION_SWITC
H, D2P_DT_MSG_BUFFER_SWITCH,
CM_CODE_CONFLICT_OPT_SWITCH,
H_SERV_CELL_CHANGE_MSG_OPT_SWITCH,
FAST_HSDPA_SERV_CELL_CHANGE_SWITCH,
RLRST_ASU_SUCC_COUNTERS_CORRECT_SW
ITCH,
COUNT_STATE_CHG_BY_RAB_EHN_SWITCH,
RAB_RELATED_COUNTER_OPT_SWITCH,
CELLUPDATE_PROCEDURE_OPT_SWITCH,
PTT_PAGING_PRD_CRRCT_SWITCH,
RRC_REL_STATUS_RSP_RAB_ASS_REQ_SWITC
H, L2U_UP_DELAY_OPT_SWITCH,
PRI_LDR_SYSHO_OUT_USE_SELECT_OPT_SWI
TCH
Unit: None
Actual Value Range:
SYS_RELOC_OUT_SUCC_STAT_OPT_SWITCH,
RL_REEST_PS_ON_FACH_SWITCH,
CELLUPDATE_MEASUREMENT_OPT_SWITCH,
D2F_PROCEDURE_OPTIMIZATION_SWITCH,
F2D_PROCEDURE_OPTIMIZATION_SWITCH,
FOREVER_PCH_CTRL_PLANE_SHARE_OPT,
FOREVER_PCH_USER_PLANE_SHARE_OPT,
RAB_REL_SRV_CELL_CHG_CROSS_SWITCH,
SCRIWITHCAUSE_OVERLAP_SWITCH,
P2F_CUC_REPEAT_SWITCH,
UU_ABN_REL_INFO_NOTIFY_NODEB_SWITCH
,
D2F_AM_PROCEDURE_OPTIMIZATION_SWITC
H,
AM_D2F_F2D_RESTMR_OPTIMIZATION_SWITC
H,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 133


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

D2P_DT_MSG_BUFFER_SWITCH,
CM_CODE_CONFLICT_OPT_SWITCH,
H_SERV_CELL_CHANGE_MSG_OPT_SWITCH,
FAST_HSDPA_SERV_CELL_CHANGE_SWITCH,
RLRST_ASU_SUCC_COUNTERS_CORRECT_SW
ITCH,
COUNT_STATE_CHG_BY_RAB_EHN_SWITCH,
RAB_RELATED_COUNTER_OPT_SWITCH,
CELLUPDATE_PROCEDURE_OPT_SWITCH,
PTT_PAGING_PRD_CRRCT_SWITCH,
RRC_REL_STATUS_RSP_RAB_ASS_REQ_SWITC
H,
L2U_UP_DELAY_OPT_SWITCH,
PRI_LDR_SYSHO_OUT_USE_SELECT_OPT_SWI
TCH
Default Value:
SYS_RELOC_OUT_SUCC_STAT_OPT_SWITCH:
1,RL_REEST_PS_ON_FACH_SWITCH:
0,CELLUPDATE_MEASUREMENT_OPT_SWITCH
:0,D2F_PROCEDURE_OPTIMIZATION_SWITCH:
0,F2D_PROCEDURE_OPTIMIZATION_SWITCH:
0,FOREVER_PCH_CTRL_PLANE_SHARE_OPT:
0,FOREVER_PCH_USER_PLANE_SHARE_OPT:
0,RAB_REL_SRV_CELL_CHG_CROSS_SWITCH:
0,SCRIWITHCAUSE_OVERLAP_SWITCH:
0,P2F_CUC_REPEAT_SWITCH:
0,UU_ABN_REL_INFO_NOTIFY_NODEB_SWITC
H:
1,D2F_AM_PROCEDURE_OPTIMIZATION_SWIT
CH:
0,AM_D2F_F2D_RESTMR_OPTIMIZATION_SWIT
CH:0,D2P_DT_MSG_BUFFER_SWITCH:
0,CM_CODE_CONFLICT_OPT_SWITCH:
1,H_SERV_CELL_CHANGE_MSG_OPT_SWITCH:
0,FAST_HSDPA_SERV_CELL_CHANGE_SWITCH
:
0,RLRST_ASU_SUCC_COUNTERS_CORRECT_S
WITCH:
0,COUNT_STATE_CHG_BY_RAB_EHN_SWITCH:
0,RAB_RELATED_COUNTER_OPT_SWITCH:
0,CELLUPDATE_PROCEDURE_OPT_SWITCH:
1,PTT_PAGING_PRD_CRRCT_SWITCH:
0,RRC_REL_STATUS_RSP_RAB_ASS_REQ_SWIT
CH:0,L2U_UP_DELAY_OPT_SWITCH:

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 134


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd
1,PRI_LDR_SYSHO_OUT_USE_SELECT_OPT_S
WITCH:0

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 135


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Optimiz BSC690 SET None None Meaning:


ationSwi 0 URRCT 1)FACH_RB_REL_CU_CROSS_OPT_SWITCH(Sup
tch6 RLSWI port Optimized Processing for the Overlap of RB
TCH Release and Cell Update for FACH UEs)
Whether the RNC performs optimized processing
when the RB release procedure overlaps with the cell
update procedure for UEs in the CELL_FACH state.
1:When this switch is set to on, the RNC sends the RB
release message to the UE in the CELL_FACH state
in acknowledged mode (AM), and in the following
scenario:
1. The RB release procedure in the state transition
from CELL_FACH to CELL_FACH overlaps with the
cell update procedure for the UE.
2. The RRC_CELL_UPDATE message does not
contain the bitRecfgStatusIndPresent IE.
If the RNC receives an ACK message to the RB
release message, the RNC processes the RB release
and cell update procedures in the preceding scenario
in the same way as when the RRC_CELL_UPDATE
message contains the bitRecfgStatusIndPresent IE. If
the RNC does not receive an ACK message, the RNC
rolls back the RB release procedure, continues with
the cell update procedure, and reestablishes the SRB.
0:When this switch is set to off, the RNC does not
perform the optimized processing if the RB release
procedure in the state transition from CELL_FACH to
CELL_FACH overlaps with the cell update procedure
for UEs in the CELL_FACH state.
2)CMCF_CHECK_CMP_SWITCH (CM Parameter
Check Compatibility Switch)
Whether the RNC requests the NodeB to check the
correctness of the constraint relationship of
compressed mode (CM) parameters when the CM is
started.
1: When this switch is set to on, the RNC requests the
NodeB to check the correctness of the constraint
relationship of CM parameters when the CM is
started.
0: When this switch is set to off, the RNC does not
request the NodeB to check the correctness of the
constraint relationship of CM parameters when the
CM is started. The NodeB checks it when CM
parameters are configured.
3)ASU_RSP_FAIL_REL_UE

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 136


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RNC abnormally releases the UE's


connection in the following scenario:
ASU_RSP_TIMEOUT_HANDLE_SWITCH under
the ProcessSwitch2 parameter in the SET
URRCTRLSWITCH command is set to on; the RNC
does not receive a response from the UE within the
specified period of time during a soft handover
procedure, but the RNC considers the soft handover as
successful and continues with the processing
accordingly. After the radio link (RL) is reestablished,
the RNC receives an ACTIVE SET UPDATE
FAILURE message from the UE.
1: This switch is set to on. The RNC discards the
ACTIVE SET UPDATE FAILURE message without
releasing the UE's connection.
0: This switch is set to off. The RNC abnormally
releases the UE's connection.
4)CELL_PCH_UES_OPT_SWITCH
Whether the RNC corrects the value of the
VS.CellPCHUEs counter in the following scenarios.
1: This switch is set to on.
Scenario 1: When a UE in the CELL_PCH state sends
a CELL UPDATE message to the RNC during its
RRC connection release, the RNC decreases the value
of this counter by one only after the RRC connection
is released, not during the RRC connection release.
Scenario 2: When the cell IDs of UEs in the
CELL_PCH state are incorrectly maintained, the RNC
corrects the value of this counter.
0: This switch is set to off.
Scenario 1: When a UE in the CELL_PCH state sends
a CELL UPDATE message to the RNC during its
RRC connection release, the RNC decreases the value
of this counter by one during the RRC connection
release as well as after the RRC connection is
released.
Scenario 2: When the cell IDs of UEs in the
CELL_PCH state are incorrectly maintained, the value
of this counter remains unchanged.
5)DRNC_NOTICE_NODEB_SRNC_VEST_SWITC
H
Whether the DRNC notifies the NodeB of the SRNC's
vendor over the Iub interface when the DRNC
determines that the SRNC is from another vendor.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 137


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is set to on. The DRNC notifies the


NodeB of the SRNC's vendor when the DRNC
determines that the SRNC is from another vendor.
0: This switch is set to off. The DRNC does not notify
the NodeB of the SRNC's vendor.
6)UMI_WITHOUT_NEWHRNTI_IN_CELLDCH_S
WITCH (UMI Sent to CELL_DCH UEs Without New
H-RNTI IE Switch)
Whether the UTRAN MOBILITY INFORMATION
message sent by the RNC to UEs in the CELL_DCH
state excludes the New H-RNTI information element
(IE).
1: This switch is set to on. The UTRAN MOBILITY
INFORMATION message sent by the RNC to UEs in
the CELL_DCH state excludes the New H-RNTI IE.
0: This switch is set to off. The UTRAN MOBILITY
INFORMATION message sent by the RNC to UEs in
the CELL_DCH state includes the New H-RNTI IE.
7) CCH_IUR_CELLUPT_FAIL_DSCR_SWITCH
(Support DSCR After CCH UE CU Failure over Iur)
Whether UEs carried on common channels perform
Directed Signaling Connection Re-establishment
(DSCR) after experiencing a cell update failure over
the Iur interface.
1: When this switch is set to on, UEs carried on
common channels perform DSCR after experiencing a
cell update failure over the Iur interface.
0: When this switch is set to off, UEs on common
channels are directly released after experiencing a cell
update failure over the Iur interface.
8)IUB_TRM_PREALLOC_OPT_SWITCH(Iub TRM
Pre-allocation Optimization Switch)
Whether the RNC applies for transmission resources
for every radio link (RL) when the NodeB establishes
more than one RL on the E-DCH at a time.
1: This switch is set to on. The RNC applies for
transmission resources for every RL when the NodeB
establishes more than one RL on the E-DCH at a time.
0: This switch is set to off. The RNC applies for
transmission resources only for the first RL when the
NodeB establishes more than one RL on the E-DCH at
a time.
9)SRB_EDCH_RECFG_OPT_SWITCH(Optimize
SRB Reconfiguration to EDCH)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 138


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the uplink SRB can be reconfigured from the


DCH to the E-DCH when there are both R99 and E-
DCH links in the active set.
0: This switch is set to off. The uplink SRB
reconfiguration from the DCH to the E-DCH fails.
1: This switch is set to on. The uplink SRB
reconfiguration from the DCH to the E-DCH is
successful.
10)BASED_IUUP_PEERADDR_PFM_OPT_SWITC
H(Based on IUUP Peer IP Address Statistical
Optimization Switch)
Whether real-time performance (RTP) measurement is
performed on the IP address pairs of CS services
during incoming inter-RAT handovers and incoming
relocations when the Iu-CS interface uses IP
transmission.
0: When this switch is set to off, RTP measurement is
not performed on IP address pairs of CS services
during incoming inter-RAT handovers or incoming
relocations.
1: When this switch is set to on, RTP measurement is
performed on IP address pairs of CS services during
incoming inter-RAT handovers and incoming
relocations.
11)DRNC_SUPP_RL_ADD_WITH_SRV_CELL_CH
G(Huawei DRNC will handle radio link addition
serving cell changes)
Whether the Huawei DRNC will handle radio link
addition requests with HSDPA serving cell changes
from a non-Huawei SRNC.
1: This switch is turned on. The Huawei DRNC sends
a RADIO LINK ADDITION RESPONSE message to
the SRNC after handling a radio link addition request
with HSDPA serving cell changes.
0: This switch is turned off. The DRNC cannot handle
radio link addition requests with HSDPA serving cell
changes.
12)OPTI_REL_UE_AFTER_IRAT_RESEL_SWITC
H(Optimize UE Release After Inter-RAT Cell Re-
selections)
Whether the RNC uses the "Out Of UTRAN" IE in the
Iu release command message to determine whether to
send an RB release or RRC connection release
message to the UE. After a UE in the CELL_PCH,
URA_PCH, or CELL_FACH state is reselected to an

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 139


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

inter-RAT cell, the RNC receives an Iu release


command message from the CN, which may contain
the "Out Of UTRAN" IE.
1: This switch is turned on. If the Iu release command
message contains this IE, the RNC directly releases
the UE without sending the RB release or RRC
connection release messages to the UE over the Uu
interface.
0: This switch is turned off. If the Iu release command
message does not contain this IE, the RNC sends an
RB release or RRC connection release message to the
UE over the Uu interface. For details, see 25.413.
13)U2L_CSFB_FAST_RETURN_PROC_OPTI_SWI
TCH
Whether the RNC triggers a blind-mode-based fast
return from UMTS to LTE for a CSFB UE
immediately after receiving an Iu Release Command
message from the CS domain of the CN.
1: Indicates that this switch is set to ON. The RNC
triggers blind-mode-based fast return from UMTS to
LTE for a CSFB UE immediately after receiving an Iu
Release Command message from the CS domain of
the CN. When this switch is turned on, it is
recommended that
DSCR_RLREL_AFTER_RRC_REL_COMPLETE
under the OptimizationSwitch9 parameter in the SET
URRCTRLSWITCH command be also set to ON.
0: Indicates that this switch is set to OFF. The RNC
does not trigger fast return from UMTS to LTE until
the CS RAB is released.
14)RL_PROCEDURE_OPT_SWITCH
Whether the RNC performs optimized processing for
RL related procedures in the following scenarios:
1: Indicates that this switch is set to ON.
Scenario 1: The pre-configuration of the compressed
mode is timed out when a UE has connections over
the Iur interface. The UE subsequently initiates a
softer handover to a cell under the DRNC. During the
softer handover, the DRNC does not send a
compressed mode deactivation flag to the NodeB. The
softer handover is successful.
Scenario 2: During a hard handover, the NodeB
notifies the RNC of an RL failure by RL set ID. On
receiving the notification, the RNC determines the RL

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 140


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

on which the notification is received and starts a timer


to wait for the RL to recover.
Scenario 3: The RNC immediately removes the RL
links based on the Transaction ID when processing the
RL deletion responses from two RLs of a UE under
the same NodeB.
Scenario 4: Multiple RLs are being reconfigured
under a NodeB of the DRNC. During the
reconfiguration procedure, the DRNC sends an NBAP
RL RECFG PREPARE message to the NodeB, which
then returns an NBAP RL RECFG READY message,
but the RLs contained in the message returned by the
NodeB are in a sequence different from those in the
message sent by the DRNC. The RL reconfiguration
procedure is successful.
Scenario 5: A UE can successfully preempt the
resources of another UE whose RL is out-of-
synchronization with its serving cell.
Scenario 6: When a UE still has multiple RLs over the
Iur interface after the first RL is removed by the
DRNC, the remaining RLs are adjusted.
Scenario 7: The RNSAP_RL_RECFG_READY
message sent by the DRNC to the SRNC contains the
correct PDU size in the following scenario: (1) A UE
only has multiple RLs under a NodeB of the RNC. (2)
The UE initiates a PS service, and the PS service is
carried on HSDPA channels and uses the Downlink
Enhanced L2 feature. (3) An RB reconfiguration
procedure is initiated to reconfigure the PS service to
HSDPA channels without the Downlink Enhanced L2
feature. The RB reconfiguration procedure is
accompanied by a serving cell change.
Scenario 8: If the DRNC is waiting for the SRNC to
set up an Iur link in Iur over ATM transmission, the
DRNC can immediately process the RNSAP RL
RECFG CANCEL message received from the SRNC.
Scenario 9: The RNC can correctly configure L2
parameters in the following scenario: A UE
performing HSDPA services initiates a soft handover
to a cell under the same NodeB. During the soft
handover, after a new RL is added for the UE and the
UE's serving cell is changed, the RNC sends an Active
Set Update message to the UE. The UE sends the
RNC a response indicating that the active set update
fails.
Scenario 10: The RL reconfiguration procedure is
successful in the following scenario: When the RNC

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 141


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

performs channel fallback due to uplink resource


insufficiency on the NodeB side during service setup,
the RNC initiates a QAAL2 MODIFY procedure
again because it has not received a response in the
earlier procedure.
0: Indicates that this switch is set to OFF.
Scenario 1: The pre-configuration of the compressed
mode is timed out when a UE has connections over
the Iur interface. The UE subsequently initiates a
softer handover to a cell under the DRNC. During the
softer handover, the DRNC does not send a
compressed mode deactivation flag to the NodeB.
Consequently, the softer handover fails.
Scenario 2: During a hard handover, the NodeB
notifies the RNC of an RL failure by RL set ID. On
receiving the notification, the RNC starts timers to
wait for the RLs in the RL set to recover.
Scenario 3: When processing the RL deletion
responses from two RLs of a UE under the same
NodeB, the RNC removes one RL based on the
Transaction ID and removes the other RL based on the
RL response timer.
Scenario 4: The RL reconfiguration procedure fails in
this scenario.
Scenario 5: The resource preemption fails in this
scenario.
Scenario 6: When a UE still has multiple RLs over the
Iur interface after the first RL is removed by the
DRNC, the remaining RLs are not adjusted.
Scenario 7: The RNSAP_RL_RECFG_READY
message sent by the DRNC to the SRNC contains an
incorrect PDU size in this scenario.
Scenario 8: The DRNC waits for the transmission
setup message from the SRNC and does not process
any other messages from the SRNC. Consequently,
the SRNC does not receive a response to the RNSAP
RL RECFG CANCEL message and abnormally
releases the connection.
Scenario 9: The RNC incorrectly configures L2
parameters in this scenario.
Scenario 10: The RL reconfiguration procedure fails
in this scenario.
15)CU_OVERLAP_OPT_SWITCH

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 142


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RNC performs optimized processing


when a procedure is initiated during the cell update
procedure.
1: Indicates that this switch is set to ON.
Scenario 1: All the cells in the active set for a UE are
under the DRNC. All these cells and the UE support
E-FACH. The SRNC's protocol version configured on
the DRNC side is earlier than R7. When the UE needs
to switch to the CELL_FACH state, the DRNC
initiates a Direct Signaling Connection Re-
establishment (DSCR) procedure.
Scenario 2: A UE having connections over the Iur
interface initiates a cell update. The DRNC receives
the Cell Update message from the UE through the
SRNC while waiting for the UE's response to another.
The DRNC does not receive a response from the UE
within a specified period of time and performs a
rollback. The RNC does not release the mapping
between the MAC-c and MAC-d during the rollback.
Scenario 3: The cell update procedure for a UE in the
CELL_PCH or URA_PCH state overlaps with a
security mode procedure. If the UE initiates a cell
update procedure again, the RNC first processes the
cell update procedure and then processes the security
mode procedure.
Scenario 4: A UE performing PS services performs a
CELL_DCH-to-CELL_FACH state transition and
subsequently initiates a cell update procedure in a cell
under the DRNC. While waiting for the UE's response
to the CELL UPDATE CONFIRM message, the RNC
receives a CELL UPDATE message again from the
UE in a cell under the SRNC and in a cell under the
DRNC. The cell under the DRNC is the same as the
cell where the UE sends the first CELL UPDATE
message to the RNC. The RNC releases the common
channel for the UE over the Iur interface.
Scenario 5: The SRNC receives a CELL UPDATE
message from a UE in a cell under the DRNC and
decide to initiate a DSCR procedure. The SRNC can
successfully initiate the DSCR procedure if the UE
has a connection over the Iu-CS interface but does not
have a CS RAB.
0: Indicates that this switch is set to OFF.
Scenario 1: The RNC initiates a common channel
establishment procedure over the Iur interface. The
procedure fails because of an internal parameter

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 143


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

configuration error. Consequently, the UE's


connection is abnormally released.
Scenario 2: The RNC releases the mapping between
the MAC-c and MAC-d in this scenario.
Scenario 3: The RNC rolls back the security mode
procedure and then processes the cell update
procedure in this scenario.
Scenario 4: The processing remains unchanged in this
scenario.
Scenario 5: The RNC does not initiate a DSCR
procedure in this scenario.
16)DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_
SWITCH
Whether the DRNC removes a UE's RLs under the
SRNC after finishing a combined cell update and
SRNS relocation if the combined cell update and
SRNS relocation is triggered to switch the UE from
the CELL_DCH state to the CELL_FACH state.
1: Indicates that this switch is set to ON. The DRNC
checks and removes the UE's RLs under the SRNC
after finishing a combined cell update and SRNS
relocation in the preceding scenario.
0: Indicates that this switch is set to OFF. The DRNC
neither checks nor removes the UE's RLs under the
SRNC after finishing a combined cell update and
SRNS relocation in the preceding scenario.
17)ADJUST_CNID_WITH_CN
Whether the RNC sends a response message with the
received global CN ID to the CN after receiving a
message with a global CN ID different from the
configured one from the CN in Iu Flex networking.
1: Indicates that this switch is set to ON. The RNC
sends a response message with the received global CN
ID to the CN in the preceding scenario.
0: Indicates that this switch is set to OFF. The RNC
sends a response message with the configured global
CN ID to the CN in the preceding scenario.
18)RAB_REL_FOC_SUCCESS_RCV_SRB_RESET
Whether the RNC considers a RAB release procedure
as successful when the RNC receives an SRB reset
message while waiting for a RADIO BEARER
RELEASE COMPLETE message from the UE.
1: Indicates that this switch is set to ON. The RNC
sends a RAB ASSIGNMENT RESPONSE message to

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 144


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

the CN, indicating that the RAB has been successfully


released. After that, the RNC processes the SRB reset
message.
0: Indicates that this switch is set to OFF. The RNC
directly processes the SRB reset message without
sending a RAB ASSIGNMENT RESPONSE message
to the CN.
19)CS_TRIG_PS_F2D_SWITCH
Whether the RNC performs a CELL_FACH-to-
CELL_DCH state transition prior to the CS RAB
setup procedure for UEs in the CELL_FACH state
when these UEs initiate a CS call.
1: Indicates that this switch is set to ON, the RNC
performs a PS-triggered CELL_FACH-to-
CELL_DCH state transition prior to the CS RAB
setup procedure for UEs in the CELL_FACH state if
these UEs initiate a CS call.
0: Indicates that this switch is set to OFF, the RNC
directly establishes the CS RAB for UEs in the
CELL_FACH state if these UEs initiate a CS call.
20)DEAL_RL_RECFG_CORRECT_SWITCH
Whether the RL reconfiguration message is corrected
when the UL Layer 2 Improvement feature is
deactivated for PS services.
1: Indicates that this switch is set to ON. The RL
reconfiguration message is corrected in the preceding
scenario.
0: Indicates that this switch is set to OFF. The RL
reconfiguration message is not corrected in the
preceding scenario.
21)RB_RECFG_RL_REEST_MDC_ROLL_BACK_
SWITCH
Whether to undo the modification made to MDC
parameters when RL reestablishment is triggered
during DCH-to-DCH RB reconfiguration for PS
services.
1: Indicates that this switch is set to ON. The system
undoes the modification made to MDC parameters in
the preceding scenario.
0: Indicates that this switch is set to OFF. The system
does not undo the modification made to MDC
parameters in the preceding scenario.
22)CODE_CONFLICT_RL_REEST_SWITCH
Whether the RNC triggers RL reestablishment for a
UE or releases the UE's RRC connection in the

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 145


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

following scenario: The NodeB detects that the code


resources allocated to the UE's RL conflict with the
code resources for existing RLs and uses an RL
Failure Indication message to notify the RNC of the
code resource conflict. The UE has only one RL.
1: Indicates that this switch is set to ON. The RNC
triggers RL reestablishment for the UE if the RL
reestablishment function is enabled in the preceding
scenario. If the RL reestablishment function is
disabled, the RNC releases the UE's RRC connection.
0: Indicates that this switch is set to OFF. The RNC
releases the UE's RRC connection in the preceding
scenario.
23)RELOC_IN_AMR_NOISE_DETECT_SWITCH(
UL Garbled Voice Detection Switch for Incoming
Static Re-locations)
Whether to enable the UL garbled voice detection
function for incoming static relocations.
1: This switch is set to ON. The UL garbled voice
detection function is enabled for incoming static
relocations of CS voice services.
0: This switch is set to OFF. The UL garbled voice
detection function is not enabled for incoming static
relocations of CS voice services.
24)CMP_NO_ACTIVE_CFN_OPT_SWITCH(CMP
MSG Without CFN Optimization Switch)
Whether the RNC starts UL garbled voice detection
when A UE's response to the Cell Update Confirm
message or the RB SETUP CMP message sent by a
UE performing combined services during a DRD
procedure does not contain the CFN (encryption and
activation time).
1: This switch is set to ON. The RNC starts UL
garbled voice detection regardless of whether the
AMRC function is enabled in either of the following
scenarios: A UE's response to the Cell Update
Confirm message does not contain the CFN. The RB
SETUP CMP message sent by a UE performing
combined services during a DRD procedure does not
contain the CFN.
0: This switch is set to OFF. The RNC does not start
UL garbled voice detection regardless of whether the
AMRC function is enabled in either of the following
scenarios: A UE's response to the Cell Update
Confirm message does not contain the CFN. The RB
SETUP CMP message sent by a UE performing

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 146


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

combined services during a DRD procedure does not


contain the CFN.
25)NON122_AMR_HHO_ROLLBACK_SWITCH(H
HO Rollback Switch for Non-12.2 k AMR-NB
Services)
Whether the hard handover rollback function is
enabled for non-12.2 kbit/s AMR-NB services.
0: This switch is set to OFF. The RNC does not
support hard handover rollback processing for
non-12.2 kbit/s AMR-NB services;
1: This switch is set to ON. The RNC supports hard
handover rollback processing for non-12.2 kbit/s
AMR-NB services. If the timer T312 is not set to 1
second, AMR noise will occur on some UEs.
26)VQI_AFTER_DT_CONNECT_SWITCH(VQI
Output After CONNECT Message Switch)
Whether the RNC measures VQIs after receiving a
CONNECT direct transfer message.
1: Indicates that this switch is set to ON. For the
calling party, the RNC starts to calculate and export
VQIs and EVQIs after receiving a CONNECT direct
transfer message. For the called party, the RNC starts
to calculate and export VQIs and EVQIs after
receiving a CONNECT ACK direct transfer message.
For UEs performing relocation procedures, the DRNC
starts to calculate and export VQIs and EVQIs after
the relocation procedure is complete.
0: Indicates that this switch is set to OFF. For the
calling party and called party, the RNC starts to
calculate and export VQIs and EVQIs after the CS RB
setup is complete. For UEs performing relocation
procedures, the DRNC starts to calculate and export
VQIs and EVQIs after the user-plane connection is
established.
27)FACH_CU_RELOC_RB_MSG_COMP_SWITC
H(Combined Cell Update and SRNS Relocation
Compatibility Switch for FACH UEs)
Whether the RNC performs compatibility processing
after receiving from a UE in the CELL_FACH state an
RB RECFG CMP message, which is subsequent to a
combined cell update and SRNS relocation procedure.
1: Indicates that this switch is set to ON. The RNC
directly discards the RB RECFG CMP message in the
preceding scenario. If the RNC receives the RB
RECFG CMP message after the timer set for the

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 147


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

combined cell update and SRNS relocation procedure


expires, the processing remains unchanged.
0: Indicates that this switch is set to OFF. The
processing mechanism remains unchanged. If the
RNC receives the RB RECFG CMP message when its
state machine is in the stable state, a call drop occurs.
28)SRNS_PROCEDURE_OPTIMIZE_SWITCH(Opti
mize Call Drops During SRNS Re-locations)
Whether the RNC considers the call release in the
following scenario to be a normal release:
When the RNC receives an SRNS Context Request
from the CN, the UE has already been admitted to an
inter-RAT system. The CN does not release the Iu
connection within the specified period of time, and the
inter-RAT handover failure is measured by the related
counter.
1: When this switch is set to ON, the RNC normally
releases the UE if the CN does not release the Iu
connection within the specified period of time.
0: When this switch is set to OFF, the RNC
abnormally releases the UE if the CN does not release
the Iu connection within the specified period of time.
29)CALL_RE_ESTAB_CROSS_WITH_SYSOUT_S
WITCH(Optimize Out Inter-RAT Re-selections
During RL Reestablishment)
Whether the RNC processes an SRNS CONTEXT
REQ message that is received during RL
reestablishment.
1: When this switch is set to ON, the RNC stops the
RL reestablishment timer upon receiving the SRNS
CONTEXT REQ message and proceeds with the
inter-RAT cell reselection procedure.
0: When this switch is set to OFF, the RNC proceeds
with the RL reestablishment procedure without
processing the SRNS CONTEST REQ message.
30)DRNC_BUFF_RL_RECFG_PREP_SWITCH(Buf
fer Retransmitted RL RECFG PREP Messages for
DRNC)
Whether the DRNC buffers a retransmitted RL
RECFG PREP message from the SRNC during an RL
reconfiguration procedure.
1: Indicates that this switch is set to ON. The DRNC
buffers the retransmitted RL RECFG PREP message
from the SRNC.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 148


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: Indicates that this switch is set to OFF. The DRNC


discards the retransmitted RL RECFG PREP message
from the SRNC.
31)PS_DCH0K_RB_MSG_OPT_SWITCH(RB
SETUP MSG Size Reduction for PS BE over 0K
DCH)
Whether the RNC reduces the size of the RB SETUP
message to UEs that have established a PS BE service
on the 0 kbit/s DCH or have established first a CS
service and then a PS BE service on the 0 kbit/s DCH.
1: Indicates that this switch is set to ON. The RNC
reduces the size of the RB SETUP message by
removing the "ul-DPCH-Info", "dl-informationPerRL-
List", "Downlink DPCH info common", and "UTRAN
DRX CycleLengthCoeff" IEs from it.
0: Indicates that this switch is set to OFF. The RNC
does not reduce the size of the RB SETUP message.
32)PS_DSCR_IU_REL_COMPATIBLE_SWITCH(Iu
Release Compatibility Switch for DSCR)
Indicates whether the CN releases the Iu connection
after the UE initiates a Direct Signaling Connection
Re-establishment (DSCR) procedure in the PS
domain.
1: Indicates that this switch is set to ON. When the UE
that initiates a DSCR procedure in the PS domain does
not receive a response from the CN within the
specified of time, the UE's Iu connection is normally
released.
0: Indicates that this switch is set to OFF. The
processing in the preceding scenario remains
unchanged.
GUI Value Range:
FACH_RB_REL_CU_CROSS_OPT_SWITCH,
CMCF_CHECK_CMP_SWITCH,
ASU_RSP_FAIL_REL_UE,
CELL_PCH_UES_OPT_SWITCH,
DRNC_NOTICE_NODEB_SRNC_VEST_SWITCH,
UMI_WITHOUT_NEWHRNTI_IN_CELLDCH_SW
ITCH,
CCH_IUR_CELLUPT_FAIL_DSCR_SWITCH,
IUB_TRM_PREALLOC_OPT_SWITCH,
SRB_EDCH_RECFG_OPT_SWITCH,
BASED_IUUP_PEERADDR_PFM_OPT_SWITCH,
DRNC_SUPP_RL_ADD_WITH_SRV_CELL_CHG,
OPTI_REL_UE_AFTER_IRAT_RESEL_SWITCH,
U2L_CSFB_FAST_RETURN_PROC_OPTI_SWITC

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 149


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

H, RL_PROCEDURE_OPT_SWITCH,
CU_OVERLAP_OPT_SWITCH,
DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_S
WITCH, ADJUST_CNID_WITH_CN,
RAB_REL_FOC_SUCCESS_RCV_SRB_RESET,
CS_TRIG_PS_F2D_SWITCH,
DEAL_RL_RECFG_CORRECT_SWITCH,
RB_RECFG_RL_REEST_MDC_ROLL_BACK_SWI
TCH, CODE_CONFLICT_RL_REEST_SWITCH,
RELOC_IN_AMR_NOISE_DETECT_SWITCH,
CMP_NO_ACTIVE_CFN_OPT_SWITCH,
NON122_AMR_HHO_ROLLBACK_SWITCH,
VQI_AFTER_DT_CONNECT_SWITCH,
FACH_CU_RELOC_RB_MSG_COMP_SWITCH,
SRNS_PROCEDURE_OPTIMIZE_SWITCH,
CALL_RE_ESTAB_CROSS_WITH_SYSOUT_SWI
TCH, DRNC_BUFF_RL_RECFG_PREP_SWITCH,
PS_DCH0K_RB_MSG_OPT_SWITCH,
PS_DSCR_IU_REL_COMPATIBLE_SWITCH
Unit: None
Actual Value Range:
FACH_RB_REL_CU_CROSS_OPT_SWITCH,
CMCF_CHECK_CMP_SWITCH,
ASU_RSP_FAIL_REL_UE,
CELL_PCH_UES_OPT_SWITCH,
DRNC_NOTICE_NODEB_SRNC_VEST_SWITCH,
UMI_WITHOUT_NEWHRNTI_IN_CELLDCH_SW
ITCH,
CCH_IUR_CELLUPT_FAIL_DSCR_SWITCH,
IUB_TRM_PREALLOC_OPT_SWITCH,
SRB_EDCH_RECFG_OPT_SWITCH,
BASED_IUUP_PEERADDR_PFM_OPT_SWITCH,
DRNC_SUPP_RL_ADD_WITH_SRV_CELL_CHG,
OPTI_REL_UE_AFTER_IRAT_RESEL_SWITCH,
U2L_CSFB_FAST_RETURN_PROC_OPTI_SWITC
H,
RL_PROCEDURE_OPT_SWITCH,
CU_OVERLAP_OPT_SWITCH,
DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_S
WITCH,
ADJUST_CNID_WITH_CN,
RAB_REL_FOC_SUCCESS_RCV_SRB_RESET,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 150


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

CS_TRIG_PS_F2D_SWITCH,
DEAL_RL_RECFG_CORRECT_SWITCH,
RB_RECFG_RL_REEST_MDC_ROLL_BACK_SWI
TCH,
CODE_CONFLICT_RL_REEST_SWITCH,
RELOC_IN_AMR_NOISE_DETECT_SWITCH,
CMP_NO_ACTIVE_CFN_OPT_SWITCH,
NON122_AMR_HHO_ROLLBACK_SWITCH,
VQI_AFTER_DT_CONNECT_SWITCH,
FACH_CU_RELOC_RB_MSG_COMP_SWITCH,
SRNS_PROCEDURE_OPTIMIZE_SWITCH,
CALL_RE_ESTAB_CROSS_WITH_SYSOUT_SWI
TCH,
DRNC_BUFF_RL_RECFG_PREP_SWITCH,
PS_DCH0K_RB_MSG_OPT_SWITCH,
PS_DSCR_IU_REL_COMPATIBLE_SWITCH
Default Value:
FACH_RB_REL_CU_CROSS_OPT_SWITCH:
0,CMCF_CHECK_CMP_SWITCH:
0,ASU_RSP_FAIL_REL_UE:
0,CELL_PCH_UES_OPT_SWITCH:
0,DRNC_NOTICE_NODEB_SRNC_VEST_SWITC
H:
0,UMI_WITHOUT_NEWHRNTI_IN_CELLDCH_S
WITCH:
0,CCH_IUR_CELLUPT_FAIL_DSCR_SWITCH:
0,IUB_TRM_PREALLOC_OPT_SWITCH:
0,SRB_EDCH_RECFG_OPT_SWITCH:
0,BASED_IUUP_PEERADDR_PFM_OPT_SWITCH
:
0,DRNC_SUPP_RL_ADD_WITH_SRV_CELL_CH
G:
0,OPTI_REL_UE_AFTER_IRAT_RESEL_SWITCH:
0,U2L_CSFB_FAST_RETURN_PROC_OPTI_SWIT
CH:0,RL_PROCEDURE_OPT_SWITCH:
0,CU_OVERLAP_OPT_SWITCH:
0,DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_S
WITCH:0,ADJUST_CNID_WITH_CN:
0,RAB_REL_FOC_SUCCESS_RCV_SRB_RESET:
0,CS_TRIG_PS_F2D_SWITCH:
0,DEAL_RL_RECFG_CORRECT_SWITCH:
0,RB_RECFG_RL_REEST_MDC_ROLL_BACK_S
WITCH:
0,CODE_CONFLICT_RL_REEST_SWITCH:

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 151


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0,RELOC_IN_AMR_NOISE_DETECT_SWITCH:
0,CMP_NO_ACTIVE_CFN_OPT_SWITCH:
0,NON122_AMR_HHO_ROLLBACK_SWITCH:
0,VQI_AFTER_DT_CONNECT_SWITCH:
0,FACH_CU_RELOC_RB_MSG_COMP_SWITCH:
0,SRNS_PROCEDURE_OPTIMIZE_SWITCH:
0,CALL_RE_ESTAB_CROSS_WITH_SYSOUT_SW
ITCH:
0,DRNC_BUFF_RL_RECFG_PREP_SWITCH:
0,PS_DCH0K_RB_MSG_OPT_SWITCH:
0,PS_DSCR_IU_REL_COMPATIBLE_SWITCH:1

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 152


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Optimiz BSC691 SET None None Meaning:


ationSwi 0 URRCT 1)FACH_RB_REL_CU_CROSS_OPT_SWITCH(Sup
tch6 RLSWI port Optimized Processing for the Overlap of RB
TCH Release and Cell Update for FACH UEs)
Whether the RNC performs optimized processing
when the RB release procedure overlaps with the cell
update procedure for UEs in the CELL_FACH state.
1:When this switch is set to on, the RNC sends the RB
release message to the UE in the CELL_FACH state
in acknowledged mode (AM), and in the following
scenario:
1. The RB release procedure in the state transition
from CELL_FACH to CELL_FACH overlaps with the
cell update procedure for the UE.
2. The RRC_CELL_UPDATE message does not
contain the bitRecfgStatusIndPresent IE.
If the RNC receives an ACK message to the RB
release message, the RNC processes the RB release
and cell update procedures in the preceding scenario
in the same way as when the RRC_CELL_UPDATE
message contains the bitRecfgStatusIndPresent IE. If
the RNC does not receive an ACK message, the RNC
rolls back the RB release procedure, continues with
the cell update procedure, and reestablishes the SRB.
0:When this switch is set to off, the RNC does not
perform the optimized processing if the RB release
procedure in the state transition from CELL_FACH to
CELL_FACH overlaps with the cell update procedure
for UEs in the CELL_FACH state.
2)CMCF_CHECK_CMP_SWITCH (CM Parameter
Check Compatibility Switch)
Whether the RNC requests the NodeB to check the
correctness of the constraint relationship of
compressed mode (CM) parameters when the CM is
started.
1: When this switch is set to on, the RNC requests the
NodeB to check the correctness of the constraint
relationship of CM parameters when the CM is
started.
0: When this switch is set to off, the RNC does not
request the NodeB to check the correctness of the
constraint relationship of CM parameters when the
CM is started. The NodeB checks it when CM
parameters are configured.
3)ASU_RSP_FAIL_REL_UE

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 153


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RNC abnormally releases the UE's


connection in the following scenario:
ASU_RSP_TIMEOUT_HANDLE_SWITCH under
the ProcessSwitch2 parameter in the SET
URRCTRLSWITCH command is set to on; the RNC
does not receive a response from the UE within the
specified period of time during a soft handover
procedure, but the RNC considers the soft handover as
successful and continues with the processing
accordingly. After the radio link (RL) is reestablished,
the RNC receives an ACTIVE SET UPDATE
FAILURE message from the UE.
1: This switch is set to on. The RNC discards the
ACTIVE SET UPDATE FAILURE message without
releasing the UE's connection.
0: This switch is set to off. The RNC abnormally
releases the UE's connection.
4)CELL_PCH_UES_OPT_SWITCH
Whether the RNC corrects the value of the
VS.CellPCHUEs counter in the following scenarios.
1: This switch is set to on.
Scenario 1: When a UE in the CELL_PCH state sends
a CELL UPDATE message to the RNC during its
RRC connection release, the RNC decreases the value
of this counter by one only after the RRC connection
is released, not during the RRC connection release.
Scenario 2: When the cell IDs of UEs in the
CELL_PCH state are incorrectly maintained, the RNC
corrects the value of this counter.
0: This switch is set to off.
Scenario 1: When a UE in the CELL_PCH state sends
a CELL UPDATE message to the RNC during its
RRC connection release, the RNC decreases the value
of this counter by one during the RRC connection
release as well as after the RRC connection is
released.
Scenario 2: When the cell IDs of UEs in the
CELL_PCH state are incorrectly maintained, the value
of this counter remains unchanged.
5)DRNC_NOTICE_NODEB_SRNC_VEST_SWITC
H
Whether the DRNC notifies the NodeB of the SRNC's
vendor over the Iub interface when the DRNC
determines that the SRNC is from another vendor.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 154


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is set to on. The DRNC notifies the


NodeB of the SRNC's vendor when the DRNC
determines that the SRNC is from another vendor.
0: This switch is set to off. The DRNC does not notify
the NodeB of the SRNC's vendor.
6)UMI_WITHOUT_NEWHRNTI_IN_CELLDCH_S
WITCH (UMI Sent to CELL_DCH UEs Without New
H-RNTI IE Switch)
Whether the UTRAN MOBILITY INFORMATION
message sent by the RNC to UEs in the CELL_DCH
state excludes the New H-RNTI information element
(IE).
1: This switch is set to on. The UTRAN MOBILITY
INFORMATION message sent by the RNC to UEs in
the CELL_DCH state excludes the New H-RNTI IE.
0: This switch is set to off. The UTRAN MOBILITY
INFORMATION message sent by the RNC to UEs in
the CELL_DCH state includes the New H-RNTI IE.
7) CCH_IUR_CELLUPT_FAIL_DSCR_SWITCH
(Support DSCR After CCH UE CU Failure over Iur)
Whether UEs carried on common channels perform
Directed Signaling Connection Re-establishment
(DSCR) after experiencing a cell update failure over
the Iur interface.
1: When this switch is set to on, UEs carried on
common channels perform DSCR after experiencing a
cell update failure over the Iur interface.
0: When this switch is set to off, UEs on common
channels are directly released after experiencing a cell
update failure over the Iur interface.
8)IUB_TRM_PREALLOC_OPT_SWITCH(Iub TRM
Pre-allocation Optimization Switch)
Whether the RNC applies for transmission resources
for every radio link (RL) when the NodeB establishes
more than one RL on the E-DCH at a time.
1: This switch is set to on. The RNC applies for
transmission resources for every RL when the NodeB
establishes more than one RL on the E-DCH at a time.
0: This switch is set to off. The RNC applies for
transmission resources only for the first RL when the
NodeB establishes more than one RL on the E-DCH at
a time.
9)SRB_EDCH_RECFG_OPT_SWITCH(Optimize
SRB Reconfiguration to EDCH)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 155


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the uplink SRB can be reconfigured from the


DCH to the E-DCH when there are both R99 and E-
DCH links in the active set.
0: This switch is set to off. The uplink SRB
reconfiguration from the DCH to the E-DCH fails.
1: This switch is set to on. The uplink SRB
reconfiguration from the DCH to the E-DCH is
successful.
10)BASED_IUUP_PEERADDR_PFM_OPT_SWITC
H(Based on IUUP Peer IP Address Statistical
Optimization Switch)
Whether real-time performance (RTP) measurement is
performed on the IP address pairs of CS services
during incoming inter-RAT handovers and incoming
relocations when the Iu-CS interface uses IP
transmission.
0: When this switch is set to off, RTP measurement is
not performed on IP address pairs of CS services
during incoming inter-RAT handovers or incoming
relocations.
1: When this switch is set to on, RTP measurement is
performed on IP address pairs of CS services during
incoming inter-RAT handovers and incoming
relocations.
11)DRNC_SUPP_RL_ADD_WITH_SRV_CELL_CH
G(Huawei DRNC will handle radio link addition
serving cell changes)
Whether the Huawei DRNC will handle radio link
addition requests with HSDPA serving cell changes
from a non-Huawei SRNC.
1: This switch is turned on. The Huawei DRNC sends
a RADIO LINK ADDITION RESPONSE message to
the SRNC after handling a radio link addition request
with HSDPA serving cell changes.
0: This switch is turned off. The DRNC cannot handle
radio link addition requests with HSDPA serving cell
changes.
12)OPTI_REL_UE_AFTER_IRAT_RESEL_SWITC
H(Optimize UE Release After Inter-RAT Cell Re-
selections)
Whether the RNC uses the "Out Of UTRAN" IE in the
Iu release command message to determine whether to
send an RB release or RRC connection release
message to the UE. After a UE in the CELL_PCH,
URA_PCH, or CELL_FACH state is reselected to an

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 156


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

inter-RAT cell, the RNC receives an Iu release


command message from the CN, which may contain
the "Out Of UTRAN" IE.
1: This switch is turned on. If the Iu release command
message contains this IE, the RNC directly releases
the UE without sending the RB release or RRC
connection release messages to the UE over the Uu
interface.
0: This switch is turned off. If the Iu release command
message does not contain this IE, the RNC sends an
RB release or RRC connection release message to the
UE over the Uu interface. For details, see 25.413.
13)U2L_CSFB_FAST_RETURN_PROC_OPTI_SWI
TCH
Whether the RNC triggers a blind-mode-based fast
return from UMTS to LTE for a CSFB UE
immediately after receiving an Iu Release Command
message from the CS domain of the CN.
1: Indicates that this switch is set to ON. The RNC
triggers blind-mode-based fast return from UMTS to
LTE for a CSFB UE immediately after receiving an Iu
Release Command message from the CS domain of
the CN. When this switch is turned on, it is
recommended that
DSCR_RLREL_AFTER_RRC_REL_COMPLETE
under the OptimizationSwitch9 parameter in the SET
URRCTRLSWITCH command be also set to ON.
0: Indicates that this switch is set to OFF. The RNC
does not trigger fast return from UMTS to LTE until
the CS RAB is released.
14)RL_PROCEDURE_OPT_SWITCH
Whether the RNC performs optimized processing for
RL related procedures in the following scenarios:
1: Indicates that this switch is set to ON.
Scenario 1: The pre-configuration of the compressed
mode is timed out when a UE has connections over
the Iur interface. The UE subsequently initiates a
softer handover to a cell under the DRNC. During the
softer handover, the DRNC does not send a
compressed mode deactivation flag to the NodeB. The
softer handover is successful.
Scenario 2: During a hard handover, the NodeB
notifies the RNC of an RL failure by RL set ID. On
receiving the notification, the RNC determines the RL

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 157


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

on which the notification is received and starts a timer


to wait for the RL to recover.
Scenario 3: The RNC immediately removes the RL
links based on the Transaction ID when processing the
RL deletion responses from two RLs of a UE under
the same NodeB.
Scenario 4: Multiple RLs are being reconfigured
under a NodeB of the DRNC. During the
reconfiguration procedure, the DRNC sends an NBAP
RL RECFG PREPARE message to the NodeB, which
then returns an NBAP RL RECFG READY message,
but the RLs contained in the message returned by the
NodeB are in a sequence different from those in the
message sent by the DRNC. The RL reconfiguration
procedure is successful.
Scenario 5: A UE can successfully preempt the
resources of another UE whose RL is out-of-
synchronization with its serving cell.
Scenario 6: When a UE still has multiple RLs over the
Iur interface after the first RL is removed by the
DRNC, the remaining RLs are adjusted.
Scenario 7: The RNSAP_RL_RECFG_READY
message sent by the DRNC to the SRNC contains the
correct PDU size in the following scenario: (1) A UE
only has multiple RLs under a NodeB of the RNC. (2)
The UE initiates a PS service, and the PS service is
carried on HSDPA channels and uses the Downlink
Enhanced L2 feature. (3) An RB reconfiguration
procedure is initiated to reconfigure the PS service to
HSDPA channels without the Downlink Enhanced L2
feature. The RB reconfiguration procedure is
accompanied by a serving cell change.
Scenario 8: If the DRNC is waiting for the SRNC to
set up an Iur link in Iur over ATM transmission, the
DRNC can immediately process the RNSAP RL
RECFG CANCEL message received from the SRNC.
Scenario 9: The RNC can correctly configure L2
parameters in the following scenario: A UE
performing HSDPA services initiates a soft handover
to a cell under the same NodeB. During the soft
handover, after a new RL is added for the UE and the
UE's serving cell is changed, the RNC sends an Active
Set Update message to the UE. The UE sends the
RNC a response indicating that the active set update
fails.
Scenario 10: The RL reconfiguration procedure is
successful in the following scenario: When the RNC

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 158


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

performs channel fallback due to uplink resource


insufficiency on the NodeB side during service setup,
the RNC initiates a QAAL2 MODIFY procedure
again because it has not received a response in the
earlier procedure.
0: Indicates that this switch is set to OFF.
Scenario 1: The pre-configuration of the compressed
mode is timed out when a UE has connections over
the Iur interface. The UE subsequently initiates a
softer handover to a cell under the DRNC. During the
softer handover, the DRNC does not send a
compressed mode deactivation flag to the NodeB.
Consequently, the softer handover fails.
Scenario 2: During a hard handover, the NodeB
notifies the RNC of an RL failure by RL set ID. On
receiving the notification, the RNC starts timers to
wait for the RLs in the RL set to recover.
Scenario 3: When processing the RL deletion
responses from two RLs of a UE under the same
NodeB, the RNC removes one RL based on the
Transaction ID and removes the other RL based on the
RL response timer.
Scenario 4: The RL reconfiguration procedure fails in
this scenario.
Scenario 5: The resource preemption fails in this
scenario.
Scenario 6: When a UE still has multiple RLs over the
Iur interface after the first RL is removed by the
DRNC, the remaining RLs are not adjusted.
Scenario 7: The RNSAP_RL_RECFG_READY
message sent by the DRNC to the SRNC contains an
incorrect PDU size in this scenario.
Scenario 8: The DRNC waits for the transmission
setup message from the SRNC and does not process
any other messages from the SRNC. Consequently,
the SRNC does not receive a response to the RNSAP
RL RECFG CANCEL message and abnormally
releases the connection.
Scenario 9: The RNC incorrectly configures L2
parameters in this scenario.
Scenario 10: The RL reconfiguration procedure fails
in this scenario.
15)CU_OVERLAP_OPT_SWITCH

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 159


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RNC performs optimized processing


when a procedure is initiated during the cell update
procedure.
1: Indicates that this switch is set to ON.
Scenario 1: All the cells in the active set for a UE are
under the DRNC. All these cells and the UE support
E-FACH. The SRNC's protocol version configured on
the DRNC side is earlier than R7. When the UE needs
to switch to the CELL_FACH state, the DRNC
initiates a Direct Signaling Connection Re-
establishment (DSCR) procedure.
Scenario 2: A UE having connections over the Iur
interface initiates a cell update. The DRNC receives
the Cell Update message from the UE through the
SRNC while waiting for the UE's response to another.
The DRNC does not receive a response from the UE
within a specified period of time and performs a
rollback. The RNC does not release the mapping
between the MAC-c and MAC-d during the rollback.
Scenario 3: The cell update procedure for a UE in the
CELL_PCH or URA_PCH state overlaps with a
security mode procedure. If the UE initiates a cell
update procedure again, the RNC first processes the
cell update procedure and then processes the security
mode procedure.
Scenario 4: A UE performing PS services performs a
CELL_DCH-to-CELL_FACH state transition and
subsequently initiates a cell update procedure in a cell
under the DRNC. While waiting for the UE's response
to the CELL UPDATE CONFIRM message, the RNC
receives a CELL UPDATE message again from the
UE in a cell under the SRNC and in a cell under the
DRNC. The cell under the DRNC is the same as the
cell where the UE sends the first CELL UPDATE
message to the RNC. The RNC releases the common
channel for the UE over the Iur interface.
Scenario 5: The SRNC receives a CELL UPDATE
message from a UE in a cell under the DRNC and
decide to initiate a DSCR procedure. The SRNC can
successfully initiate the DSCR procedure if the UE
has a connection over the Iu-CS interface but does not
have a CS RAB.
0: Indicates that this switch is set to OFF.
Scenario 1: The RNC initiates a common channel
establishment procedure over the Iur interface. The
procedure fails because of an internal parameter

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 160


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

configuration error. Consequently, the UE's


connection is abnormally released.
Scenario 2: The RNC releases the mapping between
the MAC-c and MAC-d in this scenario.
Scenario 3: The RNC rolls back the security mode
procedure and then processes the cell update
procedure in this scenario.
Scenario 4: The processing remains unchanged in this
scenario.
Scenario 5: The RNC does not initiate a DSCR
procedure in this scenario.
16)DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_
SWITCH
Whether the DRNC removes a UE's RLs under the
SRNC after finishing a combined cell update and
SRNS relocation if the combined cell update and
SRNS relocation is triggered to switch the UE from
the CELL_DCH state to the CELL_FACH state.
1: Indicates that this switch is set to ON. The DRNC
checks and removes the UE's RLs under the SRNC
after finishing a combined cell update and SRNS
relocation in the preceding scenario.
0: Indicates that this switch is set to OFF. The DRNC
neither checks nor removes the UE's RLs under the
SRNC after finishing a combined cell update and
SRNS relocation in the preceding scenario.
17)ADJUST_CNID_WITH_CN
Whether the RNC sends a response message with the
received global CN ID to the CN after receiving a
message with a global CN ID different from the
configured one from the CN in Iu Flex networking.
1: Indicates that this switch is set to ON. The RNC
sends a response message with the received global CN
ID to the CN in the preceding scenario.
0: Indicates that this switch is set to OFF. The RNC
sends a response message with the configured global
CN ID to the CN in the preceding scenario.
18)RAB_REL_FOC_SUCCESS_RCV_SRB_RESET
Whether the RNC considers a RAB release procedure
as successful when the RNC receives an SRB reset
message while waiting for a RADIO BEARER
RELEASE COMPLETE message from the UE.
1: Indicates that this switch is set to ON. The RNC
sends a RAB ASSIGNMENT RESPONSE message to

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 161


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

the CN, indicating that the RAB has been successfully


released. After that, the RNC processes the SRB reset
message.
0: Indicates that this switch is set to OFF. The RNC
directly processes the SRB reset message without
sending a RAB ASSIGNMENT RESPONSE message
to the CN.
19)CS_TRIG_PS_F2D_SWITCH
Whether the RNC performs a CELL_FACH-to-
CELL_DCH state transition prior to the CS RAB
setup procedure for UEs in the CELL_FACH state
when these UEs initiate a CS call.
1: Indicates that this switch is set to ON, the RNC
performs a PS-triggered CELL_FACH-to-
CELL_DCH state transition prior to the CS RAB
setup procedure for UEs in the CELL_FACH state if
these UEs initiate a CS call.
0: Indicates that this switch is set to OFF, the RNC
directly establishes the CS RAB for UEs in the
CELL_FACH state if these UEs initiate a CS call.
20)DEAL_RL_RECFG_CORRECT_SWITCH
Whether the RL reconfiguration message is corrected
when the UL Layer 2 Improvement feature is
deactivated for PS services.
1: Indicates that this switch is set to ON. The RL
reconfiguration message is corrected in the preceding
scenario.
0: Indicates that this switch is set to OFF. The RL
reconfiguration message is not corrected in the
preceding scenario.
21)RB_RECFG_RL_REEST_MDC_ROLL_BACK_
SWITCH
Whether to undo the modification made to MDC
parameters when RL reestablishment is triggered
during DCH-to-DCH RB reconfiguration for PS
services.
1: Indicates that this switch is set to ON. The system
undoes the modification made to MDC parameters in
the preceding scenario.
0: Indicates that this switch is set to OFF. The system
does not undo the modification made to MDC
parameters in the preceding scenario.
22)CODE_CONFLICT_RL_REEST_SWITCH
Whether the RNC triggers RL reestablishment for a
UE or releases the UE's RRC connection in the

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 162


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

following scenario: The NodeB detects that the code


resources allocated to the UE's RL conflict with the
code resources for existing RLs and uses an RL
Failure Indication message to notify the RNC of the
code resource conflict. The UE has only one RL.
1: Indicates that this switch is set to ON. The RNC
triggers RL reestablishment for the UE if the RL
reestablishment function is enabled in the preceding
scenario. If the RL reestablishment function is
disabled, the RNC releases the UE's RRC connection.
0: Indicates that this switch is set to OFF. The RNC
releases the UE's RRC connection in the preceding
scenario.
23)RELOC_IN_AMR_NOISE_DETECT_SWITCH(
UL Garbled Voice Detection Switch for Incoming
Static Re-locations)
Whether to enable the UL garbled voice detection
function for incoming static relocations.
1: This switch is set to ON. The UL garbled voice
detection function is enabled for incoming static
relocations of CS voice services.
0: This switch is set to OFF. The UL garbled voice
detection function is not enabled for incoming static
relocations of CS voice services.
24)CMP_NO_ACTIVE_CFN_OPT_SWITCH(CMP
MSG Without CFN Optimization Switch)
Whether the RNC starts UL garbled voice detection
when A UE's response to the Cell Update Confirm
message or the RB SETUP CMP message sent by a
UE performing combined services during a DRD
procedure does not contain the CFN (encryption and
activation time).
1: This switch is set to ON. The RNC starts UL
garbled voice detection regardless of whether the
AMRC function is enabled in either of the following
scenarios: A UE's response to the Cell Update
Confirm message does not contain the CFN. The RB
SETUP CMP message sent by a UE performing
combined services during a DRD procedure does not
contain the CFN.
0: This switch is set to OFF. The RNC does not start
UL garbled voice detection regardless of whether the
AMRC function is enabled in either of the following
scenarios: A UE's response to the Cell Update
Confirm message does not contain the CFN. The RB
SETUP CMP message sent by a UE performing

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 163


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

combined services during a DRD procedure does not


contain the CFN.
25)NON122_AMR_HHO_ROLLBACK_SWITCH(H
HO Rollback Switch for Non-12.2 k AMR-NB
Services)
Whether the hard handover rollback function is
enabled for non-12.2 kbit/s AMR-NB services.
0: This switch is set to OFF. The RNC does not
support hard handover rollback processing for
non-12.2 kbit/s AMR-NB services;
1: This switch is set to ON. The RNC supports hard
handover rollback processing for non-12.2 kbit/s
AMR-NB services. If the timer T312 is not set to 1
second, AMR noise will occur on some UEs.
26)VQI_AFTER_DT_CONNECT_SWITCH(VQI
Output After CONNECT Message Switch)
Whether the RNC measures VQIs after receiving a
CONNECT direct transfer message.
1: Indicates that this switch is set to ON. For the
calling party, the RNC starts to calculate and export
VQIs and EVQIs after receiving a CONNECT direct
transfer message. For the called party, the RNC starts
to calculate and export VQIs and EVQIs after
receiving a CONNECT ACK direct transfer message.
For UEs performing relocation procedures, the DRNC
starts to calculate and export VQIs and EVQIs after
the relocation procedure is complete.
0: Indicates that this switch is set to OFF. For the
calling party and called party, the RNC starts to
calculate and export VQIs and EVQIs after the CS RB
setup is complete. For UEs performing relocation
procedures, the DRNC starts to calculate and export
VQIs and EVQIs after the user-plane connection is
established.
27)FACH_CU_RELOC_RB_MSG_COMP_SWITC
H(Combined Cell Update and SRNS Relocation
Compatibility Switch for FACH UEs)
Whether the RNC performs compatibility processing
after receiving from a UE in the CELL_FACH state an
RB RECFG CMP message, which is subsequent to a
combined cell update and SRNS relocation procedure.
1: Indicates that this switch is set to ON. The RNC
directly discards the RB RECFG CMP message in the
preceding scenario. If the RNC receives the RB
RECFG CMP message after the timer set for the

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 164


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

combined cell update and SRNS relocation procedure


expires, the processing remains unchanged.
0: Indicates that this switch is set to OFF. The
processing mechanism remains unchanged. If the
RNC receives the RB RECFG CMP message when its
state machine is in the stable state, a call drop occurs.
28)SRNS_PROCEDURE_OPTIMIZE_SWITCH(Opti
mize Call Drops During SRNS Re-locations)
Whether the RNC considers the call release in the
following scenario to be a normal release:
When the RNC receives an SRNS Context Request
from the CN, the UE has already been admitted to an
inter-RAT system. The CN does not release the Iu
connection within the specified period of time, and the
inter-RAT handover failure is measured by the related
counter.
1: When this switch is set to ON, the RNC normally
releases the UE if the CN does not release the Iu
connection within the specified period of time.
0: When this switch is set to OFF, the RNC
abnormally releases the UE if the CN does not release
the Iu connection within the specified period of time.
29)CALL_RE_ESTAB_CROSS_WITH_SYSOUT_S
WITCH(Optimize Out Inter-RAT Re-selections
During RL Reestablishment)
Whether the RNC processes an SRNS CONTEXT
REQ message that is received during RL
reestablishment.
1: When this switch is set to ON, the RNC stops the
RL reestablishment timer upon receiving the SRNS
CONTEXT REQ message and proceeds with the
inter-RAT cell reselection procedure.
0: When this switch is set to OFF, the RNC proceeds
with the RL reestablishment procedure without
processing the SRNS CONTEST REQ message.
30)DRNC_BUFF_RL_RECFG_PREP_SWITCH(Buf
fer Retransmitted RL RECFG PREP Messages for
DRNC)
Whether the DRNC buffers a retransmitted RL
RECFG PREP message from the SRNC during an RL
reconfiguration procedure.
1: Indicates that this switch is set to ON. The DRNC
buffers the retransmitted RL RECFG PREP message
from the SRNC.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 165


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: Indicates that this switch is set to OFF. The DRNC


discards the retransmitted RL RECFG PREP message
from the SRNC.
31)PS_DCH0K_RB_MSG_OPT_SWITCH(RB
SETUP MSG Size Reduction for PS BE over 0K
DCH)
Whether the RNC reduces the size of the RB SETUP
message to UEs that have established a PS BE service
on the 0 kbit/s DCH or have established first a CS
service and then a PS BE service on the 0 kbit/s DCH.
1: Indicates that this switch is set to ON. The RNC
reduces the size of the RB SETUP message by
removing the "ul-DPCH-Info", "dl-informationPerRL-
List", "Downlink DPCH info common", and "UTRAN
DRX CycleLengthCoeff" IEs from it.
0: Indicates that this switch is set to OFF. The RNC
does not reduce the size of the RB SETUP message.
32)PS_DSCR_IU_REL_COMPATIBLE_SWITCH(Iu
Release Compatibility Switch for DSCR)
Indicates whether the CN releases the Iu connection
after the UE initiates a Direct Signaling Connection
Re-establishment (DSCR) procedure in the PS
domain.
1: Indicates that this switch is set to ON. When the UE
that initiates a DSCR procedure in the PS domain does
not receive a response from the CN within the
specified of time, the UE's Iu connection is normally
released.
0: Indicates that this switch is set to OFF. The
processing in the preceding scenario remains
unchanged.
GUI Value Range:
FACH_RB_REL_CU_CROSS_OPT_SWITCH,
CMCF_CHECK_CMP_SWITCH,
ASU_RSP_FAIL_REL_UE,
CELL_PCH_UES_OPT_SWITCH,
DRNC_NOTICE_NODEB_SRNC_VEST_SWITCH,
UMI_WITHOUT_NEWHRNTI_IN_CELLDCH_SW
ITCH,
CCH_IUR_CELLUPT_FAIL_DSCR_SWITCH,
IUB_TRM_PREALLOC_OPT_SWITCH,
SRB_EDCH_RECFG_OPT_SWITCH,
BASED_IUUP_PEERADDR_PFM_OPT_SWITCH,
DRNC_SUPP_RL_ADD_WITH_SRV_CELL_CHG,
OPTI_REL_UE_AFTER_IRAT_RESEL_SWITCH,
U2L_CSFB_FAST_RETURN_PROC_OPTI_SWITC

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 166


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

H, RL_PROCEDURE_OPT_SWITCH,
CU_OVERLAP_OPT_SWITCH,
DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_S
WITCH, ADJUST_CNID_WITH_CN,
RAB_REL_FOC_SUCCESS_RCV_SRB_RESET,
CS_TRIG_PS_F2D_SWITCH,
DEAL_RL_RECFG_CORRECT_SWITCH,
RB_RECFG_RL_REEST_MDC_ROLL_BACK_SWI
TCH, CODE_CONFLICT_RL_REEST_SWITCH,
RELOC_IN_AMR_NOISE_DETECT_SWITCH,
CMP_NO_ACTIVE_CFN_OPT_SWITCH,
NON122_AMR_HHO_ROLLBACK_SWITCH,
VQI_AFTER_DT_CONNECT_SWITCH,
FACH_CU_RELOC_RB_MSG_COMP_SWITCH,
SRNS_PROCEDURE_OPTIMIZE_SWITCH,
CALL_RE_ESTAB_CROSS_WITH_SYSOUT_SWI
TCH, DRNC_BUFF_RL_RECFG_PREP_SWITCH,
PS_DCH0K_RB_MSG_OPT_SWITCH,
PS_DSCR_IU_REL_COMPATIBLE_SWITCH
Unit: None
Actual Value Range:
FACH_RB_REL_CU_CROSS_OPT_SWITCH,
CMCF_CHECK_CMP_SWITCH,
ASU_RSP_FAIL_REL_UE,
CELL_PCH_UES_OPT_SWITCH,
DRNC_NOTICE_NODEB_SRNC_VEST_SWITCH,
UMI_WITHOUT_NEWHRNTI_IN_CELLDCH_SW
ITCH,
CCH_IUR_CELLUPT_FAIL_DSCR_SWITCH,
IUB_TRM_PREALLOC_OPT_SWITCH,
SRB_EDCH_RECFG_OPT_SWITCH,
BASED_IUUP_PEERADDR_PFM_OPT_SWITCH,
DRNC_SUPP_RL_ADD_WITH_SRV_CELL_CHG,
OPTI_REL_UE_AFTER_IRAT_RESEL_SWITCH,
U2L_CSFB_FAST_RETURN_PROC_OPTI_SWITC
H,
RL_PROCEDURE_OPT_SWITCH,
CU_OVERLAP_OPT_SWITCH,
DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_S
WITCH,
ADJUST_CNID_WITH_CN,
RAB_REL_FOC_SUCCESS_RCV_SRB_RESET,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 167


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

CS_TRIG_PS_F2D_SWITCH,
DEAL_RL_RECFG_CORRECT_SWITCH,
RB_RECFG_RL_REEST_MDC_ROLL_BACK_SWI
TCH,
CODE_CONFLICT_RL_REEST_SWITCH,
RELOC_IN_AMR_NOISE_DETECT_SWITCH,
CMP_NO_ACTIVE_CFN_OPT_SWITCH,
NON122_AMR_HHO_ROLLBACK_SWITCH,
VQI_AFTER_DT_CONNECT_SWITCH,
FACH_CU_RELOC_RB_MSG_COMP_SWITCH,
SRNS_PROCEDURE_OPTIMIZE_SWITCH,
CALL_RE_ESTAB_CROSS_WITH_SYSOUT_SWI
TCH,
DRNC_BUFF_RL_RECFG_PREP_SWITCH,
PS_DCH0K_RB_MSG_OPT_SWITCH,
PS_DSCR_IU_REL_COMPATIBLE_SWITCH
Default Value:
FACH_RB_REL_CU_CROSS_OPT_SWITCH:
0,CMCF_CHECK_CMP_SWITCH:
0,ASU_RSP_FAIL_REL_UE:
0,CELL_PCH_UES_OPT_SWITCH:
0,DRNC_NOTICE_NODEB_SRNC_VEST_SWITC
H:
0,UMI_WITHOUT_NEWHRNTI_IN_CELLDCH_S
WITCH:
0,CCH_IUR_CELLUPT_FAIL_DSCR_SWITCH:
0,IUB_TRM_PREALLOC_OPT_SWITCH:
0,SRB_EDCH_RECFG_OPT_SWITCH:
0,BASED_IUUP_PEERADDR_PFM_OPT_SWITCH
:
0,DRNC_SUPP_RL_ADD_WITH_SRV_CELL_CH
G:
0,OPTI_REL_UE_AFTER_IRAT_RESEL_SWITCH:
0,U2L_CSFB_FAST_RETURN_PROC_OPTI_SWIT
CH:0,RL_PROCEDURE_OPT_SWITCH:
0,CU_OVERLAP_OPT_SWITCH:
0,DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_S
WITCH:0,ADJUST_CNID_WITH_CN:
0,RAB_REL_FOC_SUCCESS_RCV_SRB_RESET:
0,CS_TRIG_PS_F2D_SWITCH:
0,DEAL_RL_RECFG_CORRECT_SWITCH:
0,RB_RECFG_RL_REEST_MDC_ROLL_BACK_S
WITCH:
0,CODE_CONFLICT_RL_REEST_SWITCH:

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 168


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0,RELOC_IN_AMR_NOISE_DETECT_SWITCH:
0,CMP_NO_ACTIVE_CFN_OPT_SWITCH:
0,NON122_AMR_HHO_ROLLBACK_SWITCH:
0,VQI_AFTER_DT_CONNECT_SWITCH:
0,FACH_CU_RELOC_RB_MSG_COMP_SWITCH:
0,SRNS_PROCEDURE_OPTIMIZE_SWITCH:
0,CALL_RE_ESTAB_CROSS_WITH_SYSOUT_SW
ITCH:
0,DRNC_BUFF_RL_RECFG_PREP_SWITCH:
0,PS_DCH0K_RB_MSG_OPT_SWITCH:
0,PS_DSCR_IU_REL_COMPATIBLE_SWITCH:1

FachPo BSC690 SET None None Meaning: Ec/No threshold, which is used to determine
werCell 0 UCELL whether to append the transmit power on the FACH
UpdtEc UPDTC during the retransmission of the CELL UPDATE
NoThd TRLSW CONFIRM message. When the RNC retransmits a
ITCH CELL UPDATE CONFIRM message to a UE, the
transmit power on the FACH is appended during the
message retransmission if the downlink coverage
Ec/No carried in the CELL UPDATE message on the
RACH is lower than this threshold. If the downlink
coverage Ec/No is greater than or equal to this
threshold, the transmit power on the FACH is not
appended during the message retransmission. When
this threshold is set to -24, the FACH transmit power
appending function is disabled during CELL
UPDATE CONFIRM message retransmission. The
default value for this threshold is -24. When this
parameter is set to a large value, signals in weak
coverage areas are considered as strong.
GUI Value Range: -24~0
Unit: dB
Actual Value Range: -24~0
Default Value: -24

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 169


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

FachPo BSC691 SET None None Meaning: Ec/No threshold, which is used to determine
werCell 0 UCELL whether to append the transmit power on the FACH
UpdtEc UPDTC during the retransmission of the CELL UPDATE
NoThd TRLSW CONFIRM message. When the RNC retransmits a
ITCH CELL UPDATE CONFIRM message to a UE, the
transmit power on the FACH is appended during the
message retransmission if the downlink coverage
Ec/No carried in the CELL UPDATE message on the
RACH is lower than this threshold. If the downlink
coverage Ec/No is greater than or equal to this
threshold, the transmit power on the FACH is not
appended during the message retransmission. When
this threshold is set to -24, the FACH transmit power
appending function is disabled during CELL
UPDATE CONFIRM message retransmission. The
default value for this threshold is -24. When this
parameter is set to a large value, signals in weak
coverage areas are considered as strong.
GUI Value Range: -24~0
Unit: dB
Actual Value Range: -24~0
Default Value: -24

CellUpd BSC690 SET None None Meaning: This parameter is used to set the causes of
tCause 0 UCELL cell updates. The cause of a cell update is carried in
UPDTC the cell update message reported by the UE.
TRLSW GUI Value Range: CELLRESELECTION(CELL
ITCH RESELECTION), PERIODICALCELLUP-
DATE(PERIODICAL CELL UPDATE),
UPLINKDATATRANSMISSION(UPLINK DATA
TRANSMISSION), PAGINGRESPONSE(PAGING
RESPONSE), RE_ENTEREDSERVICEAR-
EA(RE_ENTERED SERVICE AREA),
RADIOLINKFAILURE(RADIO LINK FAILURE),
RLCUNRECOVERABLEERROR(RLC
UNRECOVERABLE ERROR), OTHER(OTHER)
Unit: None
Actual Value Range: CELLRESELECTION,
PERIODICALCELLUPDATE,
UPLINKDATATRANSMISSION,
PAGINGRESPONSE, RE_ENTEREDSERVICEAR-
EA, RADIOLINKFAILURE,
RLCUNRECOVERABLEERROR, OTHER
Default Value: None

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 170


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

CellUpd BSC691 SET None None Meaning: This parameter is used to set the causes of
tCause 0 UCELL cell updates. The cause of a cell update is carried in
UPDTC the cell update message reported by the UE.
TRLSW GUI Value Range: CELLRESELECTION(CELL
ITCH RESELECTION), PERIODICALCELLUP-
DATE(PERIODICAL CELL UPDATE),
UPLINKDATATRANSMISSION(UPLINK DATA
TRANSMISSION), PAGINGRESPONSE(PAGING
RESPONSE), RE_ENTEREDSERVICEAR-
EA(RE_ENTERED SERVICE AREA),
RADIOLINKFAILURE(RADIO LINK FAILURE),
RLCUNRECOVERABLEERROR(RLC
UNRECOVERABLE ERROR), OTHER(OTHER)
Unit: None
Actual Value Range: CELLRESELECTION,
PERIODICALCELLUPDATE,
UPLINKDATATRANSMISSION,
PAGINGRESPONSE, RE_ENTEREDSERVICEAR-
EA, RADIOLINKFAILURE,
RLCUNRECOVERABLEERROR, OTHER
Default Value: None

T381 BSC690 SET WRFD- 3GPP Meaning: T381 is started after the RNC send message
0 UCONN 010101 R9 "RRC CONNECTION SETUP"(or "CELL UPDATE
MODET WRFD- Specific CONFIRM"). If T381 expire and RNC does not
IMER 040100 ations receive "RRC CONNECTION SETUP
Flow COMPLETE"(or the response of "CELL UPDATE
Control CONFIRM") and V381 is smaller than N381, RNC
resend "RRC CONNECTION SETUP"(or "CELL
UPDATE CONFIRM") and restart timer T381 and
increase V381. If RNC receive "RRC CONNECTION
SETUP COMPLETE"(or the response of "CELL
UPDATE CONFIRM"), T381 will be stopped. Default
value is 600ms.
GUI Value Range: D0, D100, D200, D300, D400,
D500, D600, D700, D800, D900, D1000, D1200,
D1500, D2000
Unit: ms
Actual Value Range: 0, 100, 200, 300, 400, 500, 600,
700, 800, 900, 1000, 1200, 1500, 2000
Default Value: D600

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 171


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

T381 BSC691 SET WRFD- 3GPP Meaning: T381 is started after the RNC send message
0 UCONN 010101 R9 "RRC CONNECTION SETUP"(or "CELL UPDATE
MODET WRFD- Specific CONFIRM"). If T381 expire and RNC does not
IMER 040100 ations receive "RRC CONNECTION SETUP
Flow COMPLETE"(or the response of "CELL UPDATE
Control CONFIRM") and V381 is smaller than N381, RNC
resend "RRC CONNECTION SETUP"(or "CELL
UPDATE CONFIRM") and restart timer T381 and
increase V381. If RNC receive "RRC CONNECTION
SETUP COMPLETE"(or the response of "CELL
UPDATE CONFIRM"), T381 will be stopped. Default
value is 600ms.
GUI Value Range: D0, D100, D200, D300, D400,
D500, D600, D700, D800, D900, D1000, D1200,
D1500, D2000
Unit: ms
Actual Value Range: 0, 100, 200, 300, 400, 500, 600,
700, 800, 900, 1000, 1200, 1500, 2000
Default Value: D600

MaxFac BSC690 ADD WRFD- Open Meaning: The offset between the FACH transmit
hPower 0 UFACH 020501 Loop power and P-CPICH transmit power in a cell. For
MOD Power detailed information of this parameter, see 3GPP TS
UFACH Control 25.433.
GUI Value Range: -350~150
Unit: 0.1dB
Actual Value Range: -35~15
Default Value: 10

MaxFac BSC691 ADD WRFD- Open Meaning: The offset between the FACH transmit
hPower 0 UFACH 020501 Loop power and P-CPICH transmit power in a cell. For
MOD Power detailed information of this parameter, see 3GPP TS
UFACH Control 25.433.
GUI Value Range: -350~150
Unit: 0.1dB
Actual Value Range: -35~15
Default Value: 10

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 172


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

OffsetF BSC690 ADD WRFD- 3.4/6.8/1 Meaning: Specifies the offset of the initial FACH
ACHPo 0 UFACH 010510 3.6/27.2 power to the maximum FACH transmit power. The
wer MOD Kbps initial FACH power is calculated using the offset
UFACH RRC based on the following formula: "MaxFACHPower" -
Connect OffsetFACHPower. Note:To configure this parameter,
ion and the actual value of the initial FACH power ranges
Radio from -35 dB to 15 dB. Otherwise, the value is 0. For
Access details about this parameter, see 3GPP TS 25.433.
Bearer GUI Value Range: 0~255
Establis
hment Unit: 0.1dB
and Actual Value Range: 0~25.5
Release Default Value: 0

OffsetF BSC691 ADD WRFD- 3.4/6.8/1 Meaning: Specifies the offset of the initial FACH
ACHPo 0 UFACH 010510 3.6/27.2 power to the maximum FACH transmit power. The
wer MOD Kbps initial FACH power is calculated using the offset
UFACH RRC based on the following formula: "MaxFACHPower" -
Connect OffsetFACHPower. Note:To configure this parameter,
ion and the actual value of the initial FACH power ranges
Radio from -35 dB to 15 dB. Otherwise, the value is 0. For
Access details about this parameter, see 3GPP TS 25.433.
Bearer GUI Value Range: 0~255
Establis
hment Unit: 0.1dB
and Actual Value Range: 0~25.5
Release Default Value: 0

DlOlcTr BSC690 ADD WRFD- Load Meaning: Threshold for triggering downlink OLC. If
igThd 0 UCELL 020102 Measure the ratio of the downlink load to the downlink
LDM WRFD- ment capacity is higher than or equal to this threshold for a
MOD 020107 Overloa duration longer than that specified by the
UCELL d "DlLdTrnsHysTime" parameter, downlink OLC
LDM Control (overload state) is triggered and OLC actions are
performed to reduce the cell load. The recommended
value difference between "DlOlcRelThd" and
"DlOlcTrigThd" is higher than 10% because the load
fluctuates. Otherwise, a cell frequently enters and
leaves the overload state.
GUI Value Range: 0~100
Unit: %
Actual Value Range: 0~100
Default Value: 95

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 173


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

DlOlcTr BSC691 ADD WRFD- Load Meaning: Threshold for triggering downlink OLC. If
igThd 0 UCELL 020102 Measure the ratio of the downlink load to the downlink
LDM WRFD- ment capacity is higher than or equal to this threshold for a
MOD 020107 Overloa duration longer than that specified by the
UCELL d "DlLdTrnsHysTime" parameter, downlink OLC
LDM Control (overload state) is triggered and OLC actions are
performed to reduce the cell load. The recommended
value difference between "DlOlcRelThd" and
"DlOlcTrigThd" is higher than 10% because the load
fluctuates. Otherwise, a cell frequently enters and
leaves the overload state.
GUI Value Range: 0~100
Unit: %
Actual Value Range: 0~100
Default Value: 95

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 174


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

PROCE BSC690 SET WRFD- Video Meaning:


SSSWIT 0 URRCT 150252 Service 1)INTERRAT_LOAD_SINGLE_RPT_FOR_LTE_S
CH5 RLSWI WRFD- Rate WITCH(RIM-based and Request-based Load
TCH 150253 Adaptio Information Sharing Switch)
n
WRFD- Whether a UMTS cell sends its load information to an
150254 VoIP LTE cell through the RIM procedure after receiving a
Applicat load information sharing request from the LTE cell.
WRFD- ion
150255 1: This switch is turned on. UMTS cells support the
Manage
RIM-based load information sharing function. A
WRFD- ment
UMTS cell sends its load information to an LTE cell
171202 Differen after receiving a load information sharing request
WRFD- tiated from the LTE cell.
020126 Service
0: This switch is turned off. UMTS cells do not
WRFD- Based
support the RIM-based load information sharing
180201 on
function. A UMTS cell does not respond to the load
Applicat
WRFD- information sharing request from an LTE cell.
ion
180202 Resourc 2)INTERRAT_LOAD_REPORT_FROM_LTE_SWIT
e CH(Learning LTE Load Through RIM Switch)
Reservat Whether the RNC obtains the load information about
ion LTE cells through the RAN information management
Differen (RIM) procedure. For details about the RIM
tiated procedure, see 3GPP TS 48. 018.
Service 1: This switch is turned on. The RNC obtains the load
Based information about LTE cells through the RIM
on procedure.
Termina 0: This switch is turned off. The RNC cannot obtain
l the load information about LTE cells through the RIM
Ultrafast procedure.
CS Call 3)UL_EVQI_SWITCH(UL EVQI Evaluation Switch)
Setup
Whether to enable the EVQI function in the uplink.
Mobility
1: This switch is turned on. EVQI is enabled in the
Between
uplink.
UMTS
and LTE 0: This switch is turned off. EVQI is disabled in the
Phase 1 uplink.
Improve 4)DL_EVQI_SWITCH(DL EVQI Evaluation Switch)
d Uplink Whether to enable the EVQI function in the downlink.
Coverag 1: This switch is turned on. EVQI is enabled in the
e for downlink.
SRB
0: This switch is turned off. EVQI is disabled in the
over
downlink.
DCH
5) VIDEO_RATE_ADAPTION_SWITCH (Video
Uplink
Service Rate Adaption Switch)
Data
Whether the Video Service Rate Adaption feature is
enabled.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 175


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Accelera 1: This switch is turned on. The Video Service Rate


tion Adaption feature is enabled for PS UEs processing
video services. That is, the rate of video service is
ensured or is limited for these PS UEs.
0: This switch is turned off. The Video Service Rate
Adaption feature is disabled for PS UEs.
6) VOIP_MANAGE_SWITCH (VoIP Application
Management Switch)
Whether the VoIP application management function is
enabled.
1: This switch is turned on. The VoIP application
management actions are performed on PS users who
are processing VoIP services. VoIP application
management actions can be either VoIP application
rate ensurance or VoIP application speed limit.
0: This switch is turned off. The VoIP application
management function is disabled for PS UEs.
7) DIFF_SERVICE_ON_TERMINAL_SWITCH
(Differentiated Service Based on Terminal Switch)
Whether the Differentiated Service Based on Terminal
feature is enabled.
1: This switch is turned on. PS UEs processing BE
services are grouped into different terminal groups
based on their type approval codes (TACs) in IMEIs,
and each terminal group is assigned an SPI weight for
BE services, thereby achieving differentiated services.
0: This switch is turned off. The Differentiated
Service Based on Terminal feature is disabled for PS
UEs processing BE services.
8) APP_GRP_RES_RSV_SWITCH (Differentiated
Service Based on Application Resource Reservation
Switch)
Whether the Differentiated Service Based on
Application Resource Reservation feature is enabled.
1: This switch is turned on. The RNC identifies
service types, maps different service types to different
resource groups, and configure different resource
reservation policies for these resource groups. In this
way, resource reservation is performed based on
service types.
0: This switch is turned off. The RNC does not reserve
resources based on service types or service groups.
9)RIM_ON_ECO_SWITCH(Support RIM by
eCoordinator Switch)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 176


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RIM procedure is implemented through


the eCoordinator.
1: This switch is turned on. The RIM procedure is
implemented through the eCoordinator.
0: This switch is turned off. the RIM procedure is
implemented through the CN.
This parameter is an advanced parameter. Therefore,
modify the setting of this parameter under the
instruction of Huawei technical support.
10)SRBCHG_DRD_FAST_RB_SETUP_SWITCH(R
B Fast Setup Switch for RB Setups Accompanied by
DRDs with Changing SRBs)
Whether to use the RB fast setup function for RB
setups accompanied by DRDs with changing SRBs.
1: This switch is turned on. The RB fast setup function
is used for RB setups accompanied by DRDs with
changing SRBs.
0: This switch is turned off. The simultaneous setup
procedure is used for RB setups accompanied by
DRDs with changing SRBs.
11)SRBNOCHG_DRD_FAST_RB_SETUP_SWITC
H(RB Fast Setup Switch for RB Setups Accompanied
by DRDs with Unchanged SRBs)
Whether to use the RB fast setup function for RB
setups accompanied by DRDs with unchanged SRBs.
1: This switch is turned on. The RB fast setup function
is used for RB setups accompanied by DRDs with
unchanged SRBs.
0: This switch is turned off. The simultaneous setup
procedure is used for RB setups accompanied by
DRDs with unchanged SRBs.
12)EXTD_LAC_PAGING_SWITCH(Extended LAC
Paging Switch)
Whether to enable the extended LAC paging function
1: This switch is turned on. The extended LAC paging
function is enabled.
0: This switch is turned off. The extended LAC paging
function is disabled.
13)TCP_PROXY_SWITCH
Whether to enable the TCP proxy function.
1: This switch is set to on. The RNC serves as a TCP
proxy server, and an optimized TCP algorithm is
implemented on the RAN side.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 177


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is set to off. The TCP proxy function


does not take effect.
14)FACH_RB_RECFG_FAIL_SPEC_CAUSE_SWIT
CH
Whether the RNC releases a UE's RRC connection
after an RB reconfiguration failure with the cause of
"incompatibleSimultaneousReconfiguration" or
"invalid configuration." This switch is set to off by
default.
1: This switch is turned on. The RNC releases the
UE's RRC connection.
0: This switch is turned off. The RNC does not release
the UE's RRC connection and rolls back the
procedure.
15)WBAMR_HHO_FAIL_ROLLBACK_SWITCH
Whether RNC performs rollback operations when
AMR-WB services experience hard handover failures.
1: This switch is turned on. The RNC performs
rollback operations when AMR-WB services
experience hard handover failures. Before setting this
switch to ON, you are advised to run the "SET
UCONNMODETIMER" command to set T312 to 1s.
Otherwise, some UEs experience garbled noise.
0: This switch is turned off. The RNC does not
perform rollback operations when AMR-WB services
experience hard handover failures, and UEs
experience call drops.
16)SEAMLESS_CRYSTAL_VOICE_SWITCH
Whether the RNC-level seamless crystal voice
function takes effect.
1: This switch is set to on. The RNC-level seamless
crystal voice function takes effect.
0: This switch is set to off. The RNC-level seamless
crystal voice function does not take effect.
17)CS_RB_PRI_MC_SWITCH
Switch controlling the CS RB setup prior to
measurement control (MC) function.
1: When this switch is set to on for scenarios where
CS RB setup and measurement control coexist, the
RNC preferentially delivers the RADIO BEARER
SETUP message for the CS service.
0: When this switch is set to off, the CS RB setup
prior to MC function is disabled.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 178


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

18)L2U_SRVCC_PS_TIMEOUT_CS_RELOC_IN_S
WITCH
Whether to support the incoming CS handover during
the single radio voice call continuity (SRVCC) with
simultaneous CS and PS handovers if the PS
RELOCATION REQUEST message times out.
1: When this switch is set to on, the RNC supports the
incoming CS handover after receiving a
RELOCATION REQUEST message from the CS
domain during the SRVCC for CS+PS combined
services, if the RNC does not receive a
RELOCATION REQUEST message from the PS
domain within the period of time specified by
"IRatHoWaitPSRelocReqTmr" parameter in the "SET
USTATETIMER" command.
0: When this switch is set to off, the RNC does not
support the incoming CS handover in the preceding
scenario.
For details, see 3GPP TS 23.216.
19)CRYSTAL_VOICE_DEEPCOVER_SWITCH
Whether the RNC-level Crystal Voice in Deep
Coverage function takes effect.
1: This switch is set to on. The RNC-level Crystal
Voice in Deep Coverage function takes effect.
0: This switch is set to off. The RNC-level Crystal
Voice in Deep Coverage function does not take effect.
20)LOAD_BASED_P2D_SWITCH
Whether the load- and Ec/N0-based P2D state
transition algorithm is enabled.
1: Indicates that this switch is set to ON. If both of the
following conditions are met, the RNC triggers a P2D
state transition. If either of the following conditions is
not met, the RNC triggers a P2F state transition.
(1)The actual uplink cell load enters the state specified
by "ActualloadStateForP2D" or enters a lighter state,
and the downlink non-HSPA transmit power enters the
state specified by "NonHLoadStateForP2D" or enters
a lighter state. The values of the "ActualloadState-
ForP2D" and "NonHLoadStateForP2D" parameters
can be queried by running the RNC MML command
"LST UUESTATETRANS".
(2) The Ec/N0 is greater than or equal to
"P2DEcNoThd". The value of the "P2DEcNoThd"
parameter can be queried by running the RNC MML
command "LST UFRC".

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 179


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: Indicates that this switch is set to OFF. The RNC


triggers P2F state transitions, not load- and Ec/N0-
based P2D state transitions.
21)PRIMOPER_NONROAM_USER_CN_SA_SWIT
CH
Whether the CN-initiated service awareness function
applies only to non-roaming UEs of the primary
operator.
1: Indicates that this switch is set to ON. The CN-
initiated service awareness function applies only to
non-roaming UEs of the primary operator.
0: Indicates that this switch is set to OFF. The CN-
initiated service awareness function applies to all UEs.
22)PS_R99_BLER_STAT_OPT_SWITCH(Optimize
The Measurement of PS R99 BLER)
Whether the RNC optimizes the measurement of the
block error rate (BLER) for PS R99 services.
1: Indicates that this switch is set to ON. The RNC
identifies erroneous blocks generated by false
detections during PS R99 D2F and F2D state
transitions and during soft handovers and does not
calculate these blocks into the PS R99 BLER.
0: Indicates that this switch is set to OFF. The RNC
calculates the preceding erroneous blocks into the PS
R99 BLER.
23)STATE_FACH_CONSISTENT_OPTI_SWITCH(
CELL_FACH UE State Consistency Optimization
Switch )
Whether to enable the state consistency optimization
algorithm for UEs in the CELL_FACH state.
1: Indicates that this switch is set to ON. The state
consistency optimization algorithm is enabled for UEs
in the CELL_FACH state. The RNC waits for a
certain period of time if it does not receive any
response from the UE in the CELL_FACH state. This
prevents state inconsistencies between the RNC and
UE caused by UE not receiving an RRC
CONNECTION RELEASE message.
0: Indicates that this switch is set to OFF. The state
consistency optimization algorithm is disabled for
UEs in the CELL_FACH state.
This switch is set to OFF by default.
24)D2P_RECFG_REEST_SWITCH(D2P
Reconfiguration and Reestablishment Switch)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 180


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RNC triggers a D2P reconfiguration and


reestablishment procedure for fast dormancy UEs that
have experienced a TRB reset or an uplink RL
synchronization failure.
1: Indicates that this switch is set to ON. The RNC
triggers a D2P reconfiguration and reestablishment
procedure for fast dormancy UEs that have
experienced a TRB reset or uplink RL synchronization
failure.
0: Indicates that this switch is set to OFF. The RNC
does not trigger a D2P reconfiguration and
reestablishment procedure for fast dormancy UEs in
the preceding scenario.
This switch is set to OFF by default.
25)IMPVD_UL_COVER_FOR_SRB_OVER_DCH_
SWITCH(Improved UL Coverage for SRB over DCH
Switch)
Whether to enable the Improved Uplink Coverage for
SRB over DCH feature at the RNC level.
1: Indicates that this switch is set to ON. The
Improved Uplink Coverage for SRB over DCH
feature is enabled at the RNC level.
0: Indicates that this switch is set to OFF. This feature
is not enabled.
26)UL_DT_SAI_PLMN_CMP_SWITCH
Controls the PLMN in the SAI information element
(IE) in an Initial UE Message over the Iu interface.
1: Indicates that this switch is set to ON. The PLMN
of the best cell is filled in the SAI IE.
0: Indicates that this switch is set to OFF. The PLMN
of the cell where the UE initiates an RRC connection
request is filled in the SAI IE.
27)RRC_CONN_SETUP_MSG_ENH_OPT_SWITC
H
Whether the enhancement of RRC CONNECTION
SETUP message optimization is enabled.
1: Indicates that this switch is set to ON. The RRC
CONNECTION SETUP message does not contain the
"rb-identity" IE. In addition, the RRC CONNECTION
SETUP message sent to UEs complying with 3GPP
Release 5 or later does not contain the "cell-id" IE if
the RRC connections are set up on dedicated channels.
0: Indicates that this switch is set to OFF. The RRC
CONNECTION SETUP message contains the "rb-

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 181


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

identity" IE. In addition, the RRC CONNECTION


SETUP message sent to UEs complying with 3GPP
Release 5 or later contains the "cell-id" IE if the RRC
connections are set up on dedicated channels.
28)UE_UDA_CAP_QUERY_SWITCH
Whether to enable the function of querying UEs'
uplink data acceleration capability. Data acceleration
is implemented in the uplink by compressing the PS
data.
1: Indicates that this switch is set to ON. The function
of querying UEs' uplink data acceleration capability is
enabled.
0: Indicates that this switch is set to OFF. The function
of querying UEs' uplink data acceleration capability is
disabled.
29)UDA_SWITCH
Whether to enable the uplink data acceleration
function.
1: Indicates that this switch is set to ON. The RNC
and the UE negotiate to enable the uplink data
acceleration function. After the negotiation is
successful, the UE compresses the uplink PS data
before sending it to the RNC, which then
decompresses the received PS data.
0: Indicates that this switch is set to OFF. The uplink
data acceleration function is disabled.
GUI Value Range:
INTERRAT_LOAD_SINGLE_RPT_FOR_LTE_SWI
TCH,
INTERRAT_LOAD_REPORT_FROM_LTE_SWITC
H, UL_EVQI_SWITCH, DL_EVQI_SWITCH,
VIDEO_RATE_ADAPTION_SWITCH,
VOIP_MANAGE_SWITCH,
DIFF_SERVICE_ON_TERMINAL_SWITCH,
APP_GRP_RES_RSV_SWITCH,
RIM_ON_ECO_SWITCH,
PRIMOPER_NONROAM_USER_CN_SA_SWITCH
, SRBCHG_DRD_FAST_RB_SETUP_SWITCH,
SRBNOCHG_DRD_FAST_RB_SETUP_SWITCH,
FACH_RB_RECFG_FAIL_SPEC_CAUSE_SWITCH
, WBAMR_HHO_FAIL_ROLLBACK_SWITCH,
EXTD_LAC_PAGING_SWITCH,
TCP_PROXY_SWITCH,
SEAMLESS_CRYSTAL_VOICE_SWITCH,
CS_RB_PRI_MC_SWITCH,
L2U_SRVCC_PS_TIMEOUT_CS_RELOC_IN_SWI

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 182


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

TCH, CRYSTAL_VOICE_DEEPCOVER_SWITCH,
LOAD_BASED_P2D_SWITCH,
PS_R99_BLER_STAT_OPT_SWITCH,
STATE_FACH_CONSISTENT_OPTI_SWITCH,
D2P_RECFG_REEST_SWITCH,
IMPVD_UL_COVER_FOR_SRB_OVER_DCH_SW
ITCH, UL_DT_SAI_PLMN_CMP_SWITCH,
RRC_CONN_SETUP_MSG_ENH_OPT_SWITCH,
UE_UDA_CAP_QUERY_SWITCH, UDA_SWITCH
Unit: None
Actual Value Range:
INTERRAT_LOAD_SINGLE_RPT_FOR_LTE_SWI
TCH,
INTERRAT_LOAD_REPORT_FROM_LTE_SWITC
H,
UL_EVQI_SWITCH,
DL_EVQI_SWITCH,
VIDEO_RATE_ADAPTION_SWITCH,
VOIP_MANAGE_SWITCH,
DIFF_SERVICE_ON_TERMINAL_SWITCH,
APP_GRP_RES_RSV_SWITCH,
RIM_ON_ECO_SWITCH,
PRIMOPER_NONROAM_USER_CN_SA_SWITCH
,
SRBCHG_DRD_FAST_RB_SETUP_SWITCH,
SRBNOCHG_DRD_FAST_RB_SETUP_SWITCH,
FACH_RB_RECFG_FAIL_SPEC_CAUSE_SWITCH
,
WBAMR_HHO_FAIL_ROLLBACK_SWITCH,
EXTD_LAC_PAGING_SWITCH,
TCP_PROXY_SWITCH,
SEAMLESS_CRYSTAL_VOICE_SWITCH,
CS_RB_PRI_MC_SWITCH,
L2U_SRVCC_PS_TIMEOUT_CS_RELOC_IN_SWI
TCH,
CRYSTAL_VOICE_DEEPCOVER_SWITCH,
LOAD_BASED_P2D_SWITCH,
PS_R99_BLER_STAT_OPT_SWITCH,
STATE_FACH_CONSISTENT_OPTI_SWITCH,
D2P_RECFG_REEST_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 183


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

IMPVD_UL_COVER_FOR_SRB_OVER_DCH_SW
ITCH,
UL_DT_SAI_PLMN_CMP_SWITCH,
RRC_CONN_SETUP_MSG_ENH_OPT_SWITCH,
UE_UDA_CAP_QUERY_SWITCH,
UDA_SWITCH
Default Value:
INTERRAT_LOAD_SINGLE_RPT_FOR_LTE_SWI
TCH:
0,INTERRAT_LOAD_REPORT_FROM_LTE_SWIT
CH:0,UL_EVQI_SWITCH:0,DL_EVQI_SWITCH:
0,VIDEO_RATE_ADAPTION_SWITCH:
0,VOIP_MANAGE_SWITCH:
0,DIFF_SERVICE_ON_TERMINAL_SWITCH:
0,APP_GRP_RES_RSV_SWITCH:
0,RIM_ON_ECO_SWITCH:
0,PRIMOPER_NONROAM_USER_CN_SA_SWITC
H:0,SRBCHG_DRD_FAST_RB_SETUP_SWITCH:
0,SRBNOCHG_DRD_FAST_RB_SETUP_SWITCH:
0,FACH_RB_RECFG_FAIL_SPEC_CAUSE_SWITC
H:0,WBAMR_HHO_FAIL_ROLLBACK_SWITCH:
0,EXTD_LAC_PAGING_SWITCH:
0,TCP_PROXY_SWITCH:
0,SEAMLESS_CRYSTAL_VOICE_SWITCH:
0,CS_RB_PRI_MC_SWITCH:
0,L2U_SRVCC_PS_TIMEOUT_CS_RELOC_IN_S
WITCH:
0,CRYSTAL_VOICE_DEEPCOVER_SWITCH:
0,LOAD_BASED_P2D_SWITCH:
0,PS_R99_BLER_STAT_OPT_SWITCH:
0,STATE_FACH_CONSISTENT_OPTI_SWITCH:
0,D2P_RECFG_REEST_SWITCH:
0,IMPVD_UL_COVER_FOR_SRB_OVER_DCH_S
WITCH:0,UL_DT_SAI_PLMN_CMP_SWITCH:
0,RRC_CONN_SETUP_MSG_ENH_OPT_SWITCH:
0,UE_UDA_CAP_QUERY_SWITCH:
0,UDA_SWITCH:0

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 184


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

PROCE BSC691 SET WRFD- Video Meaning:


SSSWIT 0 URRCT 150252 Service 1)INTERRAT_LOAD_SINGLE_RPT_FOR_LTE_S
CH5 RLSWI WRFD- Rate WITCH(RIM-based and Request-based Load
TCH 150253 Adaptio Information Sharing Switch)
n
WRFD- Whether a UMTS cell sends its load information to an
150254 VoIP LTE cell through the RIM procedure after receiving a
Applicat load information sharing request from the LTE cell.
WRFD- ion
150255 1: This switch is turned on. UMTS cells support the
Manage
RIM-based load information sharing function. A
WRFD- ment
UMTS cell sends its load information to an LTE cell
171202 Differen after receiving a load information sharing request
WRFD- tiated from the LTE cell.
020126 Service
0: This switch is turned off. UMTS cells do not
WRFD- Based
support the RIM-based load information sharing
180201 on
function. A UMTS cell does not respond to the load
Applicat
WRFD- information sharing request from an LTE cell.
ion
180202 Resourc 2)INTERRAT_LOAD_REPORT_FROM_LTE_SWIT
e CH(Learning LTE Load Through RIM Switch)
Reservat Whether the RNC obtains the load information about
ion LTE cells through the RAN information management
Differen (RIM) procedure. For details about the RIM
tiated procedure, see 3GPP TS 48. 018.
Service 1: This switch is turned on. The RNC obtains the load
Based information about LTE cells through the RIM
on procedure.
Termina 0: This switch is turned off. The RNC cannot obtain
l the load information about LTE cells through the RIM
Ultrafast procedure.
CS Call 3)UL_EVQI_SWITCH(UL EVQI Evaluation Switch)
Setup
Whether to enable the EVQI function in the uplink.
Mobility
1: This switch is turned on. EVQI is enabled in the
Between
uplink.
UMTS
and LTE 0: This switch is turned off. EVQI is disabled in the
Phase 1 uplink.
Improve 4)DL_EVQI_SWITCH(DL EVQI Evaluation Switch)
d Uplink Whether to enable the EVQI function in the downlink.
Coverag 1: This switch is turned on. EVQI is enabled in the
e for downlink.
SRB
0: This switch is turned off. EVQI is disabled in the
over
downlink.
DCH
5) VIDEO_RATE_ADAPTION_SWITCH (Video
Uplink
Service Rate Adaption Switch)
Data
Whether the Video Service Rate Adaption feature is
enabled.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 185


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Accelera 1: This switch is turned on. The Video Service Rate


tion Adaption feature is enabled for PS UEs processing
video services. That is, the rate of video service is
ensured or is limited for these PS UEs.
0: This switch is turned off. The Video Service Rate
Adaption feature is disabled for PS UEs.
6) VOIP_MANAGE_SWITCH (VoIP Application
Management Switch)
Whether the VoIP application management function is
enabled.
1: This switch is turned on. The VoIP application
management actions are performed on PS users who
are processing VoIP services. VoIP application
management actions can be either VoIP application
rate ensurance or VoIP application speed limit.
0: This switch is turned off. The VoIP application
management function is disabled for PS UEs.
7) DIFF_SERVICE_ON_TERMINAL_SWITCH
(Differentiated Service Based on Terminal Switch)
Whether the Differentiated Service Based on Terminal
feature is enabled.
1: This switch is turned on. PS UEs processing BE
services are grouped into different terminal groups
based on their type approval codes (TACs) in IMEIs,
and each terminal group is assigned an SPI weight for
BE services, thereby achieving differentiated services.
0: This switch is turned off. The Differentiated
Service Based on Terminal feature is disabled for PS
UEs processing BE services.
8) APP_GRP_RES_RSV_SWITCH (Differentiated
Service Based on Application Resource Reservation
Switch)
Whether the Differentiated Service Based on
Application Resource Reservation feature is enabled.
1: This switch is turned on. The RNC identifies
service types, maps different service types to different
resource groups, and configure different resource
reservation policies for these resource groups. In this
way, resource reservation is performed based on
service types.
0: This switch is turned off. The RNC does not reserve
resources based on service types or service groups.
9)RIM_ON_ECO_SWITCH(Support RIM by
eCoordinator Switch)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 186


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RIM procedure is implemented through


the eCoordinator.
1: This switch is turned on. The RIM procedure is
implemented through the eCoordinator.
0: This switch is turned off. the RIM procedure is
implemented through the CN.
This parameter is an advanced parameter. Therefore,
modify the setting of this parameter under the
instruction of Huawei technical support.
10)SRBCHG_DRD_FAST_RB_SETUP_SWITCH(R
B Fast Setup Switch for RB Setups Accompanied by
DRDs with Changing SRBs)
Whether to use the RB fast setup function for RB
setups accompanied by DRDs with changing SRBs.
1: This switch is turned on. The RB fast setup function
is used for RB setups accompanied by DRDs with
changing SRBs.
0: This switch is turned off. The simultaneous setup
procedure is used for RB setups accompanied by
DRDs with changing SRBs.
11)SRBNOCHG_DRD_FAST_RB_SETUP_SWITC
H(RB Fast Setup Switch for RB Setups Accompanied
by DRDs with Unchanged SRBs)
Whether to use the RB fast setup function for RB
setups accompanied by DRDs with unchanged SRBs.
1: This switch is turned on. The RB fast setup function
is used for RB setups accompanied by DRDs with
unchanged SRBs.
0: This switch is turned off. The simultaneous setup
procedure is used for RB setups accompanied by
DRDs with unchanged SRBs.
12)EXTD_LAC_PAGING_SWITCH(Extended LAC
Paging Switch)
Whether to enable the extended LAC paging function
1: This switch is turned on. The extended LAC paging
function is enabled.
0: This switch is turned off. The extended LAC paging
function is disabled.
13)TCP_PROXY_SWITCH
Whether to enable the TCP proxy function.
1: This switch is set to on. The RNC serves as a TCP
proxy server, and an optimized TCP algorithm is
implemented on the RAN side.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 187


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is set to off. The TCP proxy function


does not take effect.
14)FACH_RB_RECFG_FAIL_SPEC_CAUSE_SWIT
CH
Whether the RNC releases a UE's RRC connection
after an RB reconfiguration failure with the cause of
"incompatibleSimultaneousReconfiguration" or
"invalid configuration." This switch is set to off by
default.
1: This switch is turned on. The RNC releases the
UE's RRC connection.
0: This switch is turned off. The RNC does not release
the UE's RRC connection and rolls back the
procedure.
15)WBAMR_HHO_FAIL_ROLLBACK_SWITCH
Whether RNC performs rollback operations when
AMR-WB services experience hard handover failures.
1: This switch is turned on. The RNC performs
rollback operations when AMR-WB services
experience hard handover failures. Before setting this
switch to ON, you are advised to run the "SET
UCONNMODETIMER" command to set T312 to 1s.
Otherwise, some UEs experience garbled noise.
0: This switch is turned off. The RNC does not
perform rollback operations when AMR-WB services
experience hard handover failures, and UEs
experience call drops.
16)SEAMLESS_CRYSTAL_VOICE_SWITCH
Whether the RNC-level seamless crystal voice
function takes effect.
1: This switch is set to on. The RNC-level seamless
crystal voice function takes effect.
0: This switch is set to off. The RNC-level seamless
crystal voice function does not take effect.
17)CS_RB_PRI_MC_SWITCH
Switch controlling the CS RB setup prior to
measurement control (MC) function.
1: When this switch is set to on for scenarios where
CS RB setup and measurement control coexist, the
RNC preferentially delivers the RADIO BEARER
SETUP message for the CS service.
0: When this switch is set to off, the CS RB setup
prior to MC function is disabled.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 188


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

18)L2U_SRVCC_PS_TIMEOUT_CS_RELOC_IN_S
WITCH
Whether to support the incoming CS handover during
the single radio voice call continuity (SRVCC) with
simultaneous CS and PS handovers if the PS
RELOCATION REQUEST message times out.
1: When this switch is set to on, the RNC supports the
incoming CS handover after receiving a
RELOCATION REQUEST message from the CS
domain during the SRVCC for CS+PS combined
services, if the RNC does not receive a
RELOCATION REQUEST message from the PS
domain within the period of time specified by
"IRatHoWaitPSRelocReqTmr" parameter in the "SET
USTATETIMER" command.
0: When this switch is set to off, the RNC does not
support the incoming CS handover in the preceding
scenario.
For details, see 3GPP TS 23.216.
19)CRYSTAL_VOICE_DEEPCOVER_SWITCH
Whether the RNC-level Crystal Voice in Deep
Coverage function takes effect.
1: This switch is set to on. The RNC-level Crystal
Voice in Deep Coverage function takes effect.
0: This switch is set to off. The RNC-level Crystal
Voice in Deep Coverage function does not take effect.
20)LOAD_BASED_P2D_SWITCH
Whether the load- and Ec/N0-based P2D state
transition algorithm is enabled.
1: Indicates that this switch is set to ON. If both of the
following conditions are met, the RNC triggers a P2D
state transition. If either of the following conditions is
not met, the RNC triggers a P2F state transition.
(1)The actual uplink cell load enters the state specified
by "ActualloadStateForP2D" or enters a lighter state,
and the downlink non-HSPA transmit power enters the
state specified by "NonHLoadStateForP2D" or enters
a lighter state. The values of the "ActualloadState-
ForP2D" and "NonHLoadStateForP2D" parameters
can be queried by running the RNC MML command
"LST UUESTATETRANS".
(2) The Ec/N0 is greater than or equal to
"P2DEcNoThd". The value of the "P2DEcNoThd"
parameter can be queried by running the RNC MML
command "LST UFRC".

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 189


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: Indicates that this switch is set to OFF. The RNC


triggers P2F state transitions, not load- and Ec/N0-
based P2D state transitions.
21)PRIMOPER_NONROAM_USER_CN_SA_SWIT
CH
Whether the CN-initiated service awareness function
applies only to non-roaming UEs of the primary
operator.
1: Indicates that this switch is set to ON. The CN-
initiated service awareness function applies only to
non-roaming UEs of the primary operator.
0: Indicates that this switch is set to OFF. The CN-
initiated service awareness function applies to all UEs.
22)PS_R99_BLER_STAT_OPT_SWITCH(Optimize
The Measurement of PS R99 BLER)
Whether the RNC optimizes the measurement of the
block error rate (BLER) for PS R99 services.
1: Indicates that this switch is set to ON. The RNC
identifies erroneous blocks generated by false
detections during PS R99 D2F and F2D state
transitions and during soft handovers and does not
calculate these blocks into the PS R99 BLER.
0: Indicates that this switch is set to OFF. The RNC
calculates the preceding erroneous blocks into the PS
R99 BLER.
23)STATE_FACH_CONSISTENT_OPTI_SWITCH(
CELL_FACH UE State Consistency Optimization
Switch )
Whether to enable the state consistency optimization
algorithm for UEs in the CELL_FACH state.
1: Indicates that this switch is set to ON. The state
consistency optimization algorithm is enabled for UEs
in the CELL_FACH state. The RNC waits for a
certain period of time if it does not receive any
response from the UE in the CELL_FACH state. This
prevents state inconsistencies between the RNC and
UE caused by UE not receiving an RRC
CONNECTION RELEASE message.
0: Indicates that this switch is set to OFF. The state
consistency optimization algorithm is disabled for
UEs in the CELL_FACH state.
This switch is set to OFF by default.
24)D2P_RECFG_REEST_SWITCH(D2P
Reconfiguration and Reestablishment Switch)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 190


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RNC triggers a D2P reconfiguration and


reestablishment procedure for fast dormancy UEs that
have experienced a TRB reset or an uplink RL
synchronization failure.
1: Indicates that this switch is set to ON. The RNC
triggers a D2P reconfiguration and reestablishment
procedure for fast dormancy UEs that have
experienced a TRB reset or uplink RL synchronization
failure.
0: Indicates that this switch is set to OFF. The RNC
does not trigger a D2P reconfiguration and
reestablishment procedure for fast dormancy UEs in
the preceding scenario.
This switch is set to OFF by default.
25)IMPVD_UL_COVER_FOR_SRB_OVER_DCH_
SWITCH(Improved UL Coverage for SRB over DCH
Switch)
Whether to enable the Improved Uplink Coverage for
SRB over DCH feature at the RNC level.
1: Indicates that this switch is set to ON. The
Improved Uplink Coverage for SRB over DCH
feature is enabled at the RNC level.
0: Indicates that this switch is set to OFF. This feature
is not enabled.
26)UL_DT_SAI_PLMN_CMP_SWITCH
Controls the PLMN in the SAI information element
(IE) in an Initial UE Message over the Iu interface.
1: Indicates that this switch is set to ON. The PLMN
of the best cell is filled in the SAI IE.
0: Indicates that this switch is set to OFF. The PLMN
of the cell where the UE initiates an RRC connection
request is filled in the SAI IE.
27)RRC_CONN_SETUP_MSG_ENH_OPT_SWITC
H
Whether the enhancement of RRC CONNECTION
SETUP message optimization is enabled.
1: Indicates that this switch is set to ON. The RRC
CONNECTION SETUP message does not contain the
"rb-identity" IE. In addition, the RRC CONNECTION
SETUP message sent to UEs complying with 3GPP
Release 5 or later does not contain the "cell-id" IE if
the RRC connections are set up on dedicated channels.
0: Indicates that this switch is set to OFF. The RRC
CONNECTION SETUP message contains the "rb-

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 191


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

identity" IE. In addition, the RRC CONNECTION


SETUP message sent to UEs complying with 3GPP
Release 5 or later contains the "cell-id" IE if the RRC
connections are set up on dedicated channels.
28)UE_UDA_CAP_QUERY_SWITCH
Whether to enable the function of querying UEs'
uplink data acceleration capability. Data acceleration
is implemented in the uplink by compressing the PS
data.
1: Indicates that this switch is set to ON. The function
of querying UEs' uplink data acceleration capability is
enabled.
0: Indicates that this switch is set to OFF. The function
of querying UEs' uplink data acceleration capability is
disabled.
29)UDA_SWITCH
Whether to enable the uplink data acceleration
function.
1: Indicates that this switch is set to ON. The RNC
and the UE negotiate to enable the uplink data
acceleration function. After the negotiation is
successful, the UE compresses the uplink PS data
before sending it to the RNC, which then
decompresses the received PS data.
0: Indicates that this switch is set to OFF. The uplink
data acceleration function is disabled.
GUI Value Range:
INTERRAT_LOAD_SINGLE_RPT_FOR_LTE_SWI
TCH,
INTERRAT_LOAD_REPORT_FROM_LTE_SWITC
H, UL_EVQI_SWITCH, DL_EVQI_SWITCH,
VIDEO_RATE_ADAPTION_SWITCH,
VOIP_MANAGE_SWITCH,
DIFF_SERVICE_ON_TERMINAL_SWITCH,
APP_GRP_RES_RSV_SWITCH,
RIM_ON_ECO_SWITCH,
PRIMOPER_NONROAM_USER_CN_SA_SWITCH
, SRBCHG_DRD_FAST_RB_SETUP_SWITCH,
SRBNOCHG_DRD_FAST_RB_SETUP_SWITCH,
FACH_RB_RECFG_FAIL_SPEC_CAUSE_SWITCH
, WBAMR_HHO_FAIL_ROLLBACK_SWITCH,
EXTD_LAC_PAGING_SWITCH,
TCP_PROXY_SWITCH,
SEAMLESS_CRYSTAL_VOICE_SWITCH,
CS_RB_PRI_MC_SWITCH,
L2U_SRVCC_PS_TIMEOUT_CS_RELOC_IN_SWI

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 192


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

TCH, CRYSTAL_VOICE_DEEPCOVER_SWITCH,
LOAD_BASED_P2D_SWITCH,
PS_R99_BLER_STAT_OPT_SWITCH,
STATE_FACH_CONSISTENT_OPTI_SWITCH,
D2P_RECFG_REEST_SWITCH,
IMPVD_UL_COVER_FOR_SRB_OVER_DCH_SW
ITCH, UL_DT_SAI_PLMN_CMP_SWITCH,
RRC_CONN_SETUP_MSG_ENH_OPT_SWITCH,
UE_UDA_CAP_QUERY_SWITCH, UDA_SWITCH
Unit: None
Actual Value Range:
INTERRAT_LOAD_SINGLE_RPT_FOR_LTE_SWI
TCH,
INTERRAT_LOAD_REPORT_FROM_LTE_SWITC
H,
UL_EVQI_SWITCH,
DL_EVQI_SWITCH,
VIDEO_RATE_ADAPTION_SWITCH,
VOIP_MANAGE_SWITCH,
DIFF_SERVICE_ON_TERMINAL_SWITCH,
APP_GRP_RES_RSV_SWITCH,
RIM_ON_ECO_SWITCH,
PRIMOPER_NONROAM_USER_CN_SA_SWITCH
,
SRBCHG_DRD_FAST_RB_SETUP_SWITCH,
SRBNOCHG_DRD_FAST_RB_SETUP_SWITCH,
FACH_RB_RECFG_FAIL_SPEC_CAUSE_SWITCH
,
WBAMR_HHO_FAIL_ROLLBACK_SWITCH,
EXTD_LAC_PAGING_SWITCH,
TCP_PROXY_SWITCH,
SEAMLESS_CRYSTAL_VOICE_SWITCH,
CS_RB_PRI_MC_SWITCH,
L2U_SRVCC_PS_TIMEOUT_CS_RELOC_IN_SWI
TCH,
CRYSTAL_VOICE_DEEPCOVER_SWITCH,
LOAD_BASED_P2D_SWITCH,
PS_R99_BLER_STAT_OPT_SWITCH,
STATE_FACH_CONSISTENT_OPTI_SWITCH,
D2P_RECFG_REEST_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 193


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

IMPVD_UL_COVER_FOR_SRB_OVER_DCH_SW
ITCH,
UL_DT_SAI_PLMN_CMP_SWITCH,
RRC_CONN_SETUP_MSG_ENH_OPT_SWITCH,
UE_UDA_CAP_QUERY_SWITCH,
UDA_SWITCH
Default Value:
INTERRAT_LOAD_SINGLE_RPT_FOR_LTE_SWI
TCH:
0,INTERRAT_LOAD_REPORT_FROM_LTE_SWIT
CH:0,UL_EVQI_SWITCH:0,DL_EVQI_SWITCH:
0,VIDEO_RATE_ADAPTION_SWITCH:
0,VOIP_MANAGE_SWITCH:
0,DIFF_SERVICE_ON_TERMINAL_SWITCH:
0,APP_GRP_RES_RSV_SWITCH:
0,RIM_ON_ECO_SWITCH:
0,PRIMOPER_NONROAM_USER_CN_SA_SWITC
H:0,SRBCHG_DRD_FAST_RB_SETUP_SWITCH:
0,SRBNOCHG_DRD_FAST_RB_SETUP_SWITCH:
0,FACH_RB_RECFG_FAIL_SPEC_CAUSE_SWITC
H:0,WBAMR_HHO_FAIL_ROLLBACK_SWITCH:
0,EXTD_LAC_PAGING_SWITCH:
0,TCP_PROXY_SWITCH:
0,SEAMLESS_CRYSTAL_VOICE_SWITCH:
0,CS_RB_PRI_MC_SWITCH:
0,L2U_SRVCC_PS_TIMEOUT_CS_RELOC_IN_S
WITCH:
0,CRYSTAL_VOICE_DEEPCOVER_SWITCH:
0,LOAD_BASED_P2D_SWITCH:
0,PS_R99_BLER_STAT_OPT_SWITCH:
0,STATE_FACH_CONSISTENT_OPTI_SWITCH:
0,D2P_RECFG_REEST_SWITCH:
0,IMPVD_UL_COVER_FOR_SRB_OVER_DCH_S
WITCH:0,UL_DT_SAI_PLMN_CMP_SWITCH:
0,RRC_CONN_SETUP_MSG_ENH_OPT_SWITCH:
0,UE_UDA_CAP_QUERY_SWITCH:
0,UDA_SWITCH:0

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 194


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

SpecUse BSC690 ADD WRFD- HSDPA Meaning:


rFunctio 0 UIMEIT 0106100 Mobility 1) P2F_REDIR_DISABLED_SWITCH (P2F
nSwitch AC 6 Manage Redirection Inhibition Switch)
3 MOD WRFD- ment
Whether a specified UE is forbidden to perform P2F
UIMEIT 160103 Termina redirection.
AC l Black
List 1: This switch is turned on, a specified UE, for
example, a UE that has compatibility issues with P2F
redirection, cannot perform P2F redirection.
0: This switch is turned off, a specified UE can
perform P2F redirection.
2)SPECUSER_SRB_OVER_HSDPA_DISABLED_S
WITCH(SRB Over HSDPA Inhibition Switch)
Whether the downlink SRB of a specified UE is
forbidden to be carried on the HSDPA.
1: This switch is turned on, the downlink SRB of a
specified UE is forbidden to be carried on the HSDPA.
0: This switch is turned off, the downlink SRB of a
specified UE is allowed to be carried on the HSDPA.
3)SPECUSER_CPC_DTX_DRX_DISABLED_SWIT
CH(CPC DTX/DRX Inhibition Switch)
Whether a specified UE is forbidden to use CPC
DTX/DRX.
1: This switch is turned on, a specified UE is
forbidden to use CPC DTX/DRX.
0: This switch is turned off, a specified UE is allowed
to use CPC DTX/DRX.
4)SPECUSER_EFACH_DISABLED_SWITCH(EFA
CH Inhibition Switch)
Whether a specified UE is forbidden to establish
services on the E-FACH.
1: This switch is turned on. A specified UE is
forbidden to establish services on the E-FACH.
0: This switch is turned off. A specified UE is allowed
to establish services on the E-FACH.
5)SPECUSER_ERACH_DISABLED_SWITCH(ERA
CH Inhibition Switch)
Whether a specified UE is forbidden to establish
services on the E-RACH.
1: This switch is turned on. A specified UE is
forbidden to establish services on the E-RACH.
0: This switch is turned off. A specified UE is allowed
to establish services on the E-RACH.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 195


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

6)SPECUSER_PCH_FACH2EFACH_DISABLED_S
WITCH(Forbid Special UEs in the PCH State to
Perform FACH2EFACH Cell Updates)
Whether a specified UE is forbidden to perform the
P2P procedure.
1: This switch is turned on. If a specified UE moves
from a FACH cell to a cell with the Uplink or
Downlink Enhanced CELL_FACH feature activated,
or from a cell with the Uplink Enhanced
CELL_FACH feature activated to a cell with the
Downlink Enhanced CELL_FACH feature activated,
the UE is forbidden to perform the P2P procedure and
its state is reconfigured as CELL-FACH.
0: This switch is turned off. If a specified UE moves
from a FACH cell to a cell with the Uplink or
Downlink Enhanced CELL_FACH feature activated,
or from a cell with the Uplink Enhanced
CELL_FACH feature activated to a cell with the
Downlink Enhanced CELL_FACH feature activated,
the UE is allowed to perform the P2P procedure.
7)SPECUSER_INHIBIT_D2P_SWITCH(D2P
Procedure Inhibition Switch)
Whether to disable the D2P state transition for special
UEs.
When this switch is set to on, special UEs perform the
D2F state transition, not the D2P state transition if
they do not have data transmission for the period of
time specified by "D2PPsInactTimer" in the "SET
UUESTATETRANSTIMER" command.
When this switch is set to off, special UEs perform the
D2P state transition if they do not have data
transmission for the period of time specified by
"D2PPsInactTimer" in the "SET
UUESTATETRANSTIMER" command.
8)H_SERV_CELL_CHG_MSG_OPT_DISABLED_S
WITCH(Disable H Serving Cell Change MSG Size
Reduction)
Whether to disable the size reduction of the HSDPA
serving cell change message for specified UEs.
1: This switch is set to on. The size of the HSDPA
serving cell change message cannot be reduced for
specified UEs. The original HSDPA serving cell
change procedure is used.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 196


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is set to off. The size of the HSDPA


serving cell change message can be reduced for
specified UEs.
9)EFACH_ERACH_UE_D2P_DISABLED_SWITC
H(E-FACH/E-RACH UE D2P Disable Switch)
1:When this switch is turned on, specified UEs
enabled with the E-FACH or E-RACH feature cannot
perform a D2P state transition.
0:When this switch is turned off, specified UEs
enabled with the E-FACH or E-RACH feature can
perform a D2P state transition.
10)SPECUSER_DL_BLER_MEAS_DISABLED_SW
ITCH(Disable Periodic DL Transport Channel BLER
Measurement Switch)
Whether the RNC delivers periodic MR measurement
control messages on DL Transport Channel BLER to
UEs of specified TACs.
1: This switch is turned on. The RNC does not deliver
periodic MR measurement control messages on DL
Transport Channel BLER to UEs of specified TACs.
0: This switch is turned off. The RNC delivers
periodic MR measurement control messages on DL
Transport Channel BLER to UEs of specified TACs.
11)SPECUSER_AGPS_MEAS_DISABLED_SWITC
H(Disable Periodic AGPS Measurement Switch)
Whether the RNC delivers periodic MR measurement
control messages on assisted GPS (AGPS) to UEs of
specified TACs.
1: This switch is turned on. The RNC does not deliver
periodic MR measurement control messages on AGPS
to UEs of specified TACs.
0: This switch is turned off. The RNC delivers
periodic MR measurement control messages on AGPS
to UEs of specified TACs.
12)SPECUSER_UE_TX_PWR_MEAS_DISABLED_
SWITCH(Disable Periodic UE Tx Power
Measurement Switch)
Whether the RNC delivers periodic MR measurement
control messages on UE Tx Power to UEs of specified
TACs.
1: This switch is turned on. The RNC does not deliver
periodic MR measurement control messages on UE
Tx Power to UEs of specified TACs.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 197


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. The RNC delivers


periodic MR measurement control messages on UE
Tx Power to UEs of specified TACs.
13)SPECUSER_CELLID_RTT_MEAS_DISABLED_
SWITCH(Disable Periodic CELLID RTT
Measurement Switch)
Whether the RNC delivers periodic MR measurement
control messages on CELLID RTT to UEs of
specified TACs.
1: This switch is turned on. The RNC does not deliver
periodic MR measurement control messages on
CELLID RTT to UEs of specified TACs.
0: This switch is turned off. The RNC delivers
periodic MR measurement control messages on
CELLID RTT to UEs of specified TACs.
14)FAST_H_SERV_CELL_CHANGE_DISABLED_
SWITCH (Fast HSDPA Serving Cell Change
Optimization Disable Switch)
Whether to disable the fast HSDPA serving cell
change optimization function for a specified UE.
1: When this switch is turned on, the fast HSDPA
serving cell change optimization function cannot be
used for a specified UE. The original HSDPA serving
cell change procedure is used.
0: When this switch is turned off, the fast HSDPA
serving cell change optimization function can be used
for a specified UE.
15)SPECUSER_SFDC_HSDPA_DISABLED_SWIT
CH(Disable SFDC HSDPA for Special Users)
Whether to prohibit special users from using the
Single Frequency Dual Cell (SFDC)-HSDPA function.
1: This switch is set to on. Special users are prohibited
from using the SFDC-HSDPA function.
0: This switch is set to off. When the services of
special users meet the requirements of this function,
the services can use this function.
This switch is reserved for the MF-HSDPA(multi-flow
HSDPA) function and cannot be used in the current
version.
16)SPECUSER_DF3C_HSDPA_DISABLED_SWIT
CH(Disable DF3C HSDPA for Special Users)
Whether to prohibit special users from using the Dual
Frequency three Cell (DF3C)-HSDPA function.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 198


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is set to on. Special users are prohibited


from using the DF3C-HSDPA function.
0: This switch is set to off. When the services of
special users meet the requirements of this function,
the services can use this function.
This switch is reserved for the MF-HSDPA(multi-flow
HSDPA) function and cannot be used in the current
version.
17)SPECUSER_FASTMULRLSETUP_DISABLED_
SWITCH(Disable Fast Multi-RL Setup for Special
Users During Inter-freq HHOs)
Whether to disable the fast multi-RL setup function
for special users during an inter-frequency hard
handover (HHO).
1: This switch is set to on. Only one radio link (RL) is
set up for special users during an inter-frequency
HHO.
0: This switch is set to off. Multiple RLs are set up for
special users during an inter-frequency HHO.
18)SPECUSER_R6_EFACH_CMP_SWITCH
Whether the RNC performs special processing on
special users that comply with 3GPP Release 6 when
these users mistakenly switch to the enhanced
CELL_FACH state in an E-FACH cell.
1: Indicates that this switch is to ON. The RNC
performs the following processing on special UEs:
If special UEs initiate data transmission in an EFACH
cell, the RNC switches special UEs to the
CELL_DCH state and forbids them to enter the
CELL_PCH or CELL_FACH state.
If special UEs initiate a cell update procedure using
the cause value "uplink data transmission" or "paging
response" to reconfigure from a FACH cell to an
EFACH cell and if the UE was originally in the
CELL_PCH or URA_PCH state, the RNC switches
the UE to the CELL_DCH state. If the cell update
procedure uses another cause value, the RNC releases
UEs' connections.
If special UEs in the CELL_FACH state initiate a cell
update procedure to reconfigure from a FACH cell to
an EFACH cell, the RNC releases the UEs'
connections after the cell update procedure is
complete.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 199


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: When this switch is set to off, the RNC performs no


special processing on the UE.
19)SPECUSER_IFFASTMULRL_CMP_DISABLED
_SWITCH
Whether to disable the Instant Macro Diversity
compatibility processing function for special UEs to
increase the inter-frequency handover success rate.
1: Indicates that this switch is set to ON. Special UEs
are prohibited from using the Instant Macro Diversity
compatibility processing function.
0: Indicates that this switch is set to OFF. Special UEs
are allowed to use the Instant Macro Diversity
compatibility processing function.
20)SPECUSER_AGPS_MEAS_ENABLED_SWITC
H
Whether the RNC sends periodic measurement control
messages on the Assisted Global Positioning System
(A-GPS) to UEs of specified TACs. TAC is short for
type approval code.
1: Indicates that this switch is set to ON. The RNC
sends periodic measurement control messages on the
A-GPS to UEs of specified TACs.
0: Indicates that this switch is set to OFF. The RNC
does not send periodic measurement control messages
on the A-GPS to UEs of specified TACs.
21)SPECUSER_ENABLE_RPRT_AGPR_MR_ONC
E_SWITCH
Whether the RNC sends measurement control
messages on the A-GPS to UEs of specified TACs,
instructing UEs to send the measurement report only
once.
1: Indicates that this switch is set to ON. The RNC
sends measurement control messages on the A-GPS to
UEs of specified TACs, instructing UEs to send the
measurement report only once to save UE battery
power.
0: Indicates that this switch is set to OFF. The RNC
sends periodic measurement control messages on the
A-GPS to UEs of specified TACs.
22)SPECUSER_PS_SETUP_DCH0K_DISABLED_S
WITCH(Forbid Establishment of PS BE Services of
Special Users on 0K DCH)
Whether the RNC forbids special users from
establishing their PS BE services on the 0 kbit/s DCH.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 200


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: Indicates that this switch is set to ON. The RNC


forbids special users from establishing their PS BE
services on the 0 kbit/s DCH.
0: Indicates that this switch is set to OFF. Special
users can establish their PS BE services on the 0 kbit/s
DCH.
23)SPECUSER_FACH_CONSIS_OPTI_DISABLE_
SWITCH(Forbid CELL_FACH State Consistency
Optimization for Special Users )
Whether the RNC forbids the state consistency
optimization function for special users in the
CELL_FACH state.
1: Indicates that this switch is set to ON. The RNC
forbids the state consistency optimization function for
special users in the CELL_FACH state.
0: Indicates that this switch is set to OFF. The RNC
enables the state consistency optimization function for
special users in the CELL_FACH state.
This switch is set to OFF by default.
24)SPECUSER_ADJACENT_FREQ_DISABLED_S
WITCH
Whether special UEs are prohibited from performing
the inter-frequency measurement on the neighboring
frequencies or neighboring frequency bands without
starting the compressed mode.
1: This switch is turned on. Special UEs are prohibited
from performing the measurement without starting the
compressed mode.
0: This switch is turned off. Special UEs are allowed
to perform the measurement without starting the
compressed mode.
25)SPECUSER_RL_PERFORMANCE_OPT_SWIT
CH(Terminal Type-based Link Performance
Optimization Switch)
Whether the RNC optimizes link performance for UEs
of a specified type.
1: Indicates that this switch is set to ON. The RNC
optimizes link performance for UEs of a specified
type.
0: Indicates that this switch is set to OFF. The RNC
does not optimize link performance for UEs of a
specified type.
GUI Value Range:
P2F_REDIR_DISABLED_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 201


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

SPECUSER_SRB_OVER_HSDPA_DISABLED_SW
ITCH,
SPECUSER_CPC_DTX_DRX_DISABLED_SWITC
H, SPECUSER_EFACH_DISABLED_SWITCH,
SPECUSER_ERACH_DISABLED_SWITCH,
SPECUSER_PCH_FACH2EFACH_DISABLED_SW
ITCH, SPECUSER_INHIBIT_D2P_SWITCH,
H_SERV_CELL_CHG_MSG_OPT_DISABLED_SW
ITCH,
EFACH_ERACH_UE_D2P_DISABLED_SWITCH,
SPECUSER_DL_BLER_MEAS_DISABLED_SWIT
CH,
SPECUSER_AGPS_MEAS_DISABLED_SWITCH,
SPECUSER_UE_TX_PWR_MEAS_DISABLED_S
WITCH,
SPECUSER_CELLID_RTT_MEAS_DISABLED_S
WITCH,
FAST_H_SERV_CELL_CHANGE_DISABLED_SW
ITCH,
SPECUSER_SFDC_HSDPA_DISABLED_SWITCH,
SPECUSER_DF3C_HSDPA_DISABLED_SWITCH,
SPECUSER_FASTMULRLSETUP_DISABLED_SW
ITCH, SPECUSER_R6_EFACH_CMP_SWITCH,
SPECUSER_IFFASTMULRL_CMP_DISABLED_S
WITCH,
SPECUSER_AGPS_MEAS_ENABLED_SWITCH,
SPECUSER_ENABLE_RPRT_AGPR_MR_ONCE_S
WITCH,
SPECUSER_PS_SETUP_DCH0K_DISABLED_SWI
TCH,
SPECUSER_FACH_CONSIS_OPTI_DISABLE_SWI
TCH,
SPECUSER_ADJACENT_FREQ_DISABLED_SWI
TCH,
SPECUSER_RL_PERFORMANCE_OPT_SWITCH
Unit: None
Actual Value Range:
P2F_REDIR_DISABLED_SWITCH,
SPECUSER_SRB_OVER_HSDPA_DISABLED_SW
ITCH,
SPECUSER_CPC_DTX_DRX_DISABLED_SWITC
H,
SPECUSER_EFACH_DISABLED_SWITCH,
SPECUSER_ERACH_DISABLED_SWITCH,
SPECUSER_PCH_FACH2EFACH_DISABLED_SW
ITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 202


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

SPECUSER_INHIBIT_D2P_SWITCH,
H_SERV_CELL_CHG_MSG_OPT_DISABLED_SW
ITCH,
EFACH_ERACH_UE_D2P_DISABLED_SWITCH,
SPECUSER_DL_BLER_MEAS_DISABLED_SWIT
CH,
SPECUSER_AGPS_MEAS_DISABLED_SWITCH,
SPECUSER_UE_TX_PWR_MEAS_DISABLED_S
WITCH,
SPECUSER_CELLID_RTT_MEAS_DISABLED_S
WITCH,
FAST_H_SERV_CELL_CHANGE_DISABLED_SW
ITCH,
SPECUSER_SFDC_HSDPA_DISABLED_SWITCH,
SPECUSER_DF3C_HSDPA_DISABLED_SWITCH,
SPECUSER_FASTMULRLSETUP_DISABLED_SW
ITCH,
SPECUSER_R6_EFACH_CMP_SWITCH,
SPECUSER_IFFASTMULRL_CMP_DISABLED_S
WITCH,
SPECUSER_AGPS_MEAS_ENABLED_SWITCH,
SPECUSER_ENABLE_RPRT_AGPR_MR_ONCE_S
WITCH,
SPECUSER_PS_SETUP_DCH0K_DISABLED_SWI
TCH,
SPECUSER_FACH_CONSIS_OPTI_DISABLE_SWI
TCH,
SPECUSER_ADJACENT_FREQ_DISABLED_SWI
TCH,
SPECUSER_RL_PERFORMANCE_OPT_SWITCH
Default Value: P2F_REDIR_DISABLED_SWITCH:
0,SPECUSER_SRB_OVER_HSDPA_DISABLED_S
WITCH:0,
SPECUSER_CPC_DTX_DRX_DISABLED_SWITC
H:0, SPECUSER_EFACH_DISABLED_SWITCH:0,
SPECUSER_ERACH_DISABLED_SWITCH:
0,SPECUSER_PCH_FACH2EFACH_DISABLED_S
WITCH:0,SPECUSER_INHIBIT_D2P_SWITCH:
0,H_SERV_CELL_CHG_MSG_OPT_DISABLED_S
WITCH:
0,EFACH_ERACH_UE_D2P_DISABLED_SWITCH
:
0,SPECUSER_DL_BLER_MEAS_DISABLED_SWI

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 203


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

TCH:
0,SPECUSER_AGPS_MEAS_DISABLED_SWITCH
:
0,SPECUSER_UE_TX_PWR_MEAS_DISABLED_S
WITCH:
0,SPECUSER_CELLID_RTT_MEAS_DISABLED_S
WITCH:
0,FAST_H_SERV_CELL_CHANGE_DISABLED_S
WITCH:
0,SPECUSER_SFDC_HSDPA_DISABLED_SWITC
H:
0,SPECUSER_DF3C_HSDPA_DISABLED_SWITC
H:
0,SPECUSER_FASTMULRLSETUP_DISABLED_S
WITCH:0,SPECUSER_R6_EFACH_CMP_SWITCH:
0,SPECUSER_IFFASTMULRL_CMP_DISABLED_
SWITCH:
0,SPECUSER_AGPS_MEAS_ENABLED_SWITCH:
0,SPECUSER_ENABLE_RPRT_AGPR_MR_ONCE
_SWITCH:
0,SPECUSER_PS_SETUP_DCH0K_DISABLED_S
WITCH:
0,SPECUSER_FACH_CONSIS_OPTI_DISABLE_S
WITCH:
0,SPECUSER_ADJACENT_FREQ_DISABLED_SW
ITCH:
0,SPECUSER_RL_PERFORMANCE_OPT_SWITC
H:0

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 204


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

SpecUse BSC691 ADD WRFD- HSDPA Meaning:


rFunctio 0 UIMEIT 0106100 Mobility 1) P2F_REDIR_DISABLED_SWITCH (P2F
nSwitch AC 6 Manage Redirection Inhibition Switch)
3 MOD WRFD- ment
Whether a specified UE is forbidden to perform P2F
UIMEIT 160103 Termina redirection.
AC l Black
List 1: This switch is turned on, a specified UE, for
example, a UE that has compatibility issues with P2F
redirection, cannot perform P2F redirection.
0: This switch is turned off, a specified UE can
perform P2F redirection.
2)SPECUSER_SRB_OVER_HSDPA_DISABLED_S
WITCH(SRB Over HSDPA Inhibition Switch)
Whether the downlink SRB of a specified UE is
forbidden to be carried on the HSDPA.
1: This switch is turned on, the downlink SRB of a
specified UE is forbidden to be carried on the HSDPA.
0: This switch is turned off, the downlink SRB of a
specified UE is allowed to be carried on the HSDPA.
3)SPECUSER_CPC_DTX_DRX_DISABLED_SWIT
CH(CPC DTX/DRX Inhibition Switch)
Whether a specified UE is forbidden to use CPC
DTX/DRX.
1: This switch is turned on, a specified UE is
forbidden to use CPC DTX/DRX.
0: This switch is turned off, a specified UE is allowed
to use CPC DTX/DRX.
4)SPECUSER_EFACH_DISABLED_SWITCH(EFA
CH Inhibition Switch)
Whether a specified UE is forbidden to establish
services on the E-FACH.
1: This switch is turned on. A specified UE is
forbidden to establish services on the E-FACH.
0: This switch is turned off. A specified UE is allowed
to establish services on the E-FACH.
5)SPECUSER_ERACH_DISABLED_SWITCH(ERA
CH Inhibition Switch)
Whether a specified UE is forbidden to establish
services on the E-RACH.
1: This switch is turned on. A specified UE is
forbidden to establish services on the E-RACH.
0: This switch is turned off. A specified UE is allowed
to establish services on the E-RACH.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 205


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

6)SPECUSER_PCH_FACH2EFACH_DISABLED_S
WITCH(Forbid Special UEs in the PCH State to
Perform FACH2EFACH Cell Updates)
Whether a specified UE is forbidden to perform the
P2P procedure.
1: This switch is turned on. If a specified UE moves
from a FACH cell to a cell with the Uplink or
Downlink Enhanced CELL_FACH feature activated,
or from a cell with the Uplink Enhanced
CELL_FACH feature activated to a cell with the
Downlink Enhanced CELL_FACH feature activated,
the UE is forbidden to perform the P2P procedure and
its state is reconfigured as CELL-FACH.
0: This switch is turned off. If a specified UE moves
from a FACH cell to a cell with the Uplink or
Downlink Enhanced CELL_FACH feature activated,
or from a cell with the Uplink Enhanced
CELL_FACH feature activated to a cell with the
Downlink Enhanced CELL_FACH feature activated,
the UE is allowed to perform the P2P procedure.
7)SPECUSER_INHIBIT_D2P_SWITCH(D2P
Procedure Inhibition Switch)
Whether to disable the D2P state transition for special
UEs.
When this switch is set to on, special UEs perform the
D2F state transition, not the D2P state transition if
they do not have data transmission for the period of
time specified by "D2PPsInactTimer" in the "SET
UUESTATETRANSTIMER" command.
When this switch is set to off, special UEs perform the
D2P state transition if they do not have data
transmission for the period of time specified by
"D2PPsInactTimer" in the "SET
UUESTATETRANSTIMER" command.
8)H_SERV_CELL_CHG_MSG_OPT_DISABLED_S
WITCH(Disable H Serving Cell Change MSG Size
Reduction)
Whether to disable the size reduction of the HSDPA
serving cell change message for specified UEs.
1: This switch is set to on. The size of the HSDPA
serving cell change message cannot be reduced for
specified UEs. The original HSDPA serving cell
change procedure is used.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 206


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is set to off. The size of the HSDPA


serving cell change message can be reduced for
specified UEs.
9)EFACH_ERACH_UE_D2P_DISABLED_SWITC
H(E-FACH/E-RACH UE D2P Disable Switch)
1:When this switch is turned on, specified UEs
enabled with the E-FACH or E-RACH feature cannot
perform a D2P state transition.
0:When this switch is turned off, specified UEs
enabled with the E-FACH or E-RACH feature can
perform a D2P state transition.
10)SPECUSER_DL_BLER_MEAS_DISABLED_SW
ITCH(Disable Periodic DL Transport Channel BLER
Measurement Switch)
Whether the RNC delivers periodic MR measurement
control messages on DL Transport Channel BLER to
UEs of specified TACs.
1: This switch is turned on. The RNC does not deliver
periodic MR measurement control messages on DL
Transport Channel BLER to UEs of specified TACs.
0: This switch is turned off. The RNC delivers
periodic MR measurement control messages on DL
Transport Channel BLER to UEs of specified TACs.
11)SPECUSER_AGPS_MEAS_DISABLED_SWITC
H(Disable Periodic AGPS Measurement Switch)
Whether the RNC delivers periodic MR measurement
control messages on assisted GPS (AGPS) to UEs of
specified TACs.
1: This switch is turned on. The RNC does not deliver
periodic MR measurement control messages on AGPS
to UEs of specified TACs.
0: This switch is turned off. The RNC delivers
periodic MR measurement control messages on AGPS
to UEs of specified TACs.
12)SPECUSER_UE_TX_PWR_MEAS_DISABLED_
SWITCH(Disable Periodic UE Tx Power
Measurement Switch)
Whether the RNC delivers periodic MR measurement
control messages on UE Tx Power to UEs of specified
TACs.
1: This switch is turned on. The RNC does not deliver
periodic MR measurement control messages on UE
Tx Power to UEs of specified TACs.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 207


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. The RNC delivers


periodic MR measurement control messages on UE
Tx Power to UEs of specified TACs.
13)SPECUSER_CELLID_RTT_MEAS_DISABLED_
SWITCH(Disable Periodic CELLID RTT
Measurement Switch)
Whether the RNC delivers periodic MR measurement
control messages on CELLID RTT to UEs of
specified TACs.
1: This switch is turned on. The RNC does not deliver
periodic MR measurement control messages on
CELLID RTT to UEs of specified TACs.
0: This switch is turned off. The RNC delivers
periodic MR measurement control messages on
CELLID RTT to UEs of specified TACs.
14)FAST_H_SERV_CELL_CHANGE_DISABLED_
SWITCH (Fast HSDPA Serving Cell Change
Optimization Disable Switch)
Whether to disable the fast HSDPA serving cell
change optimization function for a specified UE.
1: When this switch is turned on, the fast HSDPA
serving cell change optimization function cannot be
used for a specified UE. The original HSDPA serving
cell change procedure is used.
0: When this switch is turned off, the fast HSDPA
serving cell change optimization function can be used
for a specified UE.
15)SPECUSER_SFDC_HSDPA_DISABLED_SWIT
CH(Disable SFDC HSDPA for Special Users)
Whether to prohibit special users from using the
Single Frequency Dual Cell (SFDC)-HSDPA function.
1: This switch is set to on. Special users are prohibited
from using the SFDC-HSDPA function.
0: This switch is set to off. When the services of
special users meet the requirements of this function,
the services can use this function.
This switch is reserved for the MF-HSDPA(multi-flow
HSDPA) function and cannot be used in the current
version.
16)SPECUSER_DF3C_HSDPA_DISABLED_SWIT
CH(Disable DF3C HSDPA for Special Users)
Whether to prohibit special users from using the Dual
Frequency three Cell (DF3C)-HSDPA function.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 208


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is set to on. Special users are prohibited


from using the DF3C-HSDPA function.
0: This switch is set to off. When the services of
special users meet the requirements of this function,
the services can use this function.
This switch is reserved for the MF-HSDPA(multi-flow
HSDPA) function and cannot be used in the current
version.
17)SPECUSER_FASTMULRLSETUP_DISABLED_
SWITCH(Disable Fast Multi-RL Setup for Special
Users During Inter-freq HHOs)
Whether to disable the fast multi-RL setup function
for special users during an inter-frequency hard
handover (HHO).
1: This switch is set to on. Only one radio link (RL) is
set up for special users during an inter-frequency
HHO.
0: This switch is set to off. Multiple RLs are set up for
special users during an inter-frequency HHO.
18)SPECUSER_R6_EFACH_CMP_SWITCH
Whether the RNC performs special processing on
special users that comply with 3GPP Release 6 when
these users mistakenly switch to the enhanced
CELL_FACH state in an E-FACH cell.
1: Indicates that this switch is to ON. The RNC
performs the following processing on special UEs:
If special UEs initiate data transmission in an EFACH
cell, the RNC switches special UEs to the
CELL_DCH state and forbids them to enter the
CELL_PCH or CELL_FACH state.
If special UEs initiate a cell update procedure using
the cause value "uplink data transmission" or "paging
response" to reconfigure from a FACH cell to an
EFACH cell and if the UE was originally in the
CELL_PCH or URA_PCH state, the RNC switches
the UE to the CELL_DCH state. If the cell update
procedure uses another cause value, the RNC releases
UEs' connections.
If special UEs in the CELL_FACH state initiate a cell
update procedure to reconfigure from a FACH cell to
an EFACH cell, the RNC releases the UEs'
connections after the cell update procedure is
complete.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 209


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: When this switch is set to off, the RNC performs no


special processing on the UE.
19)SPECUSER_IFFASTMULRL_CMP_DISABLED
_SWITCH
Whether to disable the Instant Macro Diversity
compatibility processing function for special UEs to
increase the inter-frequency handover success rate.
1: Indicates that this switch is set to ON. Special UEs
are prohibited from using the Instant Macro Diversity
compatibility processing function.
0: Indicates that this switch is set to OFF. Special UEs
are allowed to use the Instant Macro Diversity
compatibility processing function.
20)SPECUSER_AGPS_MEAS_ENABLED_SWITC
H
Whether the RNC sends periodic measurement control
messages on the Assisted Global Positioning System
(A-GPS) to UEs of specified TACs. TAC is short for
type approval code.
1: Indicates that this switch is set to ON. The RNC
sends periodic measurement control messages on the
A-GPS to UEs of specified TACs.
0: Indicates that this switch is set to OFF. The RNC
does not send periodic measurement control messages
on the A-GPS to UEs of specified TACs.
21)SPECUSER_ENABLE_RPRT_AGPR_MR_ONC
E_SWITCH
Whether the RNC sends measurement control
messages on the A-GPS to UEs of specified TACs,
instructing UEs to send the measurement report only
once.
1: Indicates that this switch is set to ON. The RNC
sends measurement control messages on the A-GPS to
UEs of specified TACs, instructing UEs to send the
measurement report only once to save UE battery
power.
0: Indicates that this switch is set to OFF. The RNC
sends periodic measurement control messages on the
A-GPS to UEs of specified TACs.
22)SPECUSER_PS_SETUP_DCH0K_DISABLED_S
WITCH(Forbid Establishment of PS BE Services of
Special Users on 0K DCH)
Whether the RNC forbids special users from
establishing their PS BE services on the 0 kbit/s DCH.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 210


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: Indicates that this switch is set to ON. The RNC


forbids special users from establishing their PS BE
services on the 0 kbit/s DCH.
0: Indicates that this switch is set to OFF. Special
users can establish their PS BE services on the 0 kbit/s
DCH.
23)SPECUSER_FACH_CONSIS_OPTI_DISABLE_
SWITCH(Forbid CELL_FACH State Consistency
Optimization for Special Users )
Whether the RNC forbids the state consistency
optimization function for special users in the
CELL_FACH state.
1: Indicates that this switch is set to ON. The RNC
forbids the state consistency optimization function for
special users in the CELL_FACH state.
0: Indicates that this switch is set to OFF. The RNC
enables the state consistency optimization function for
special users in the CELL_FACH state.
This switch is set to OFF by default.
24)SPECUSER_ADJACENT_FREQ_DISABLED_S
WITCH
Whether special UEs are prohibited from performing
the inter-frequency measurement on the neighboring
frequencies or neighboring frequency bands without
starting the compressed mode.
1: This switch is turned on. Special UEs are prohibited
from performing the measurement without starting the
compressed mode.
0: This switch is turned off. Special UEs are allowed
to perform the measurement without starting the
compressed mode.
25)SPECUSER_RL_PERFORMANCE_OPT_SWIT
CH(Terminal Type-based Link Performance
Optimization Switch)
Whether the RNC optimizes link performance for UEs
of a specified type.
1: Indicates that this switch is set to ON. The RNC
optimizes link performance for UEs of a specified
type.
0: Indicates that this switch is set to OFF. The RNC
does not optimize link performance for UEs of a
specified type.
GUI Value Range:
P2F_REDIR_DISABLED_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 211


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

SPECUSER_SRB_OVER_HSDPA_DISABLED_SW
ITCH,
SPECUSER_CPC_DTX_DRX_DISABLED_SWITC
H, SPECUSER_EFACH_DISABLED_SWITCH,
SPECUSER_ERACH_DISABLED_SWITCH,
SPECUSER_PCH_FACH2EFACH_DISABLED_SW
ITCH, SPECUSER_INHIBIT_D2P_SWITCH,
H_SERV_CELL_CHG_MSG_OPT_DISABLED_SW
ITCH,
EFACH_ERACH_UE_D2P_DISABLED_SWITCH,
SPECUSER_DL_BLER_MEAS_DISABLED_SWIT
CH,
SPECUSER_AGPS_MEAS_DISABLED_SWITCH,
SPECUSER_UE_TX_PWR_MEAS_DISABLED_S
WITCH,
SPECUSER_CELLID_RTT_MEAS_DISABLED_S
WITCH,
FAST_H_SERV_CELL_CHANGE_DISABLED_SW
ITCH,
SPECUSER_SFDC_HSDPA_DISABLED_SWITCH,
SPECUSER_DF3C_HSDPA_DISABLED_SWITCH,
SPECUSER_FASTMULRLSETUP_DISABLED_SW
ITCH, SPECUSER_R6_EFACH_CMP_SWITCH,
SPECUSER_IFFASTMULRL_CMP_DISABLED_S
WITCH,
SPECUSER_AGPS_MEAS_ENABLED_SWITCH,
SPECUSER_ENABLE_RPRT_AGPR_MR_ONCE_S
WITCH,
SPECUSER_PS_SETUP_DCH0K_DISABLED_SWI
TCH,
SPECUSER_FACH_CONSIS_OPTI_DISABLE_SWI
TCH,
SPECUSER_ADJACENT_FREQ_DISABLED_SWI
TCH,
SPECUSER_RL_PERFORMANCE_OPT_SWITCH
Unit: None
Actual Value Range:
P2F_REDIR_DISABLED_SWITCH,
SPECUSER_SRB_OVER_HSDPA_DISABLED_SW
ITCH,
SPECUSER_CPC_DTX_DRX_DISABLED_SWITC
H,
SPECUSER_EFACH_DISABLED_SWITCH,
SPECUSER_ERACH_DISABLED_SWITCH,
SPECUSER_PCH_FACH2EFACH_DISABLED_SW
ITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 212


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

SPECUSER_INHIBIT_D2P_SWITCH,
H_SERV_CELL_CHG_MSG_OPT_DISABLED_SW
ITCH,
EFACH_ERACH_UE_D2P_DISABLED_SWITCH,
SPECUSER_DL_BLER_MEAS_DISABLED_SWIT
CH,
SPECUSER_AGPS_MEAS_DISABLED_SWITCH,
SPECUSER_UE_TX_PWR_MEAS_DISABLED_S
WITCH,
SPECUSER_CELLID_RTT_MEAS_DISABLED_S
WITCH,
FAST_H_SERV_CELL_CHANGE_DISABLED_SW
ITCH,
SPECUSER_SFDC_HSDPA_DISABLED_SWITCH,
SPECUSER_DF3C_HSDPA_DISABLED_SWITCH,
SPECUSER_FASTMULRLSETUP_DISABLED_SW
ITCH,
SPECUSER_R6_EFACH_CMP_SWITCH,
SPECUSER_IFFASTMULRL_CMP_DISABLED_S
WITCH,
SPECUSER_AGPS_MEAS_ENABLED_SWITCH,
SPECUSER_ENABLE_RPRT_AGPR_MR_ONCE_S
WITCH,
SPECUSER_PS_SETUP_DCH0K_DISABLED_SWI
TCH,
SPECUSER_FACH_CONSIS_OPTI_DISABLE_SWI
TCH,
SPECUSER_ADJACENT_FREQ_DISABLED_SWI
TCH,
SPECUSER_RL_PERFORMANCE_OPT_SWITCH
Default Value: P2F_REDIR_DISABLED_SWITCH:
0,SPECUSER_SRB_OVER_HSDPA_DISABLED_S
WITCH:0,
SPECUSER_CPC_DTX_DRX_DISABLED_SWITC
H:0, SPECUSER_EFACH_DISABLED_SWITCH:0,
SPECUSER_ERACH_DISABLED_SWITCH:
0,SPECUSER_PCH_FACH2EFACH_DISABLED_S
WITCH:0,SPECUSER_INHIBIT_D2P_SWITCH:
0,H_SERV_CELL_CHG_MSG_OPT_DISABLED_S
WITCH:
0,EFACH_ERACH_UE_D2P_DISABLED_SWITCH
:
0,SPECUSER_DL_BLER_MEAS_DISABLED_SWI

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 213


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

TCH:
0,SPECUSER_AGPS_MEAS_DISABLED_SWITCH
:
0,SPECUSER_UE_TX_PWR_MEAS_DISABLED_S
WITCH:
0,SPECUSER_CELLID_RTT_MEAS_DISABLED_S
WITCH:
0,FAST_H_SERV_CELL_CHANGE_DISABLED_S
WITCH:
0,SPECUSER_SFDC_HSDPA_DISABLED_SWITC
H:
0,SPECUSER_DF3C_HSDPA_DISABLED_SWITC
H:
0,SPECUSER_FASTMULRLSETUP_DISABLED_S
WITCH:0,SPECUSER_R6_EFACH_CMP_SWITCH:
0,SPECUSER_IFFASTMULRL_CMP_DISABLED_
SWITCH:
0,SPECUSER_AGPS_MEAS_ENABLED_SWITCH:
0,SPECUSER_ENABLE_RPRT_AGPR_MR_ONCE
_SWITCH:
0,SPECUSER_PS_SETUP_DCH0K_DISABLED_S
WITCH:
0,SPECUSER_FACH_CONSIS_OPTI_DISABLE_S
WITCH:
0,SPECUSER_ADJACENT_FREQ_DISABLED_SW
ITCH:
0,SPECUSER_RL_PERFORMANCE_OPT_SWITC
H:0

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 214


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Optimiz BSC690 SET None None Meaning:


ationSwi 0 URRCT 1)RB_RLREEST_AM_TRB_RLC_REEST_SWITC
tch4 RLSWI H(Reestablish TRB RLC in AM for RL Reestablish)
TCH
When radio link (RL) reestablishment is triggered
during RB related procedures, the encryption
parameters configured for the RNC become
inconsistent with those configured for the UE if the
following conditions are met: The RB related
procedure succeeds; the TRB is in acknowledged
mode (AM) or the size of the RLC PDU changes in
AM; the RLC entity is not reestablished for the TRB.
As a result, data transmission fails on the user plane,
and the TRB is reset. This parameter specifies whether
the RNC reestablishes the RLC entity for TRBs that
use AM in the preceding scenario.
1: This switch is turned on. The RLC entity is
reestablished for the TRB in the preceding scenario.
0: This switch is turned off. The RLC entity is not
reestablished for the TRB in the preceding scenario.
2)RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_
SWITCH(Optimize RL Reestablishment for UM
TRB)
When RL reestablishment is triggered during an RB
setup procedure in unacknowledged mode (UM), the
encryption parameters for the RNC and UE cannot be
reconfigured. As a result, after the RL is reestablished,
data transmission fails on the user plane because the
encryption parameters configured for the RNC are
inconsistent with those configured for the UE.
Services are interrupted. This parameter specifies
whether the RNC reestablishes the RL for TRBs that
use UM in the preceding scenario.
1: This switch is turned on. If the TRB has been
established for the UE, RL reestablishment is not
performed in the preceding scenario even if its trigger
conditions are met.
0: This switch is turned off. RL reestablishment is
performed in the preceding scenario when its trigger
conditions are met.
3)DRNC_RL_REEST_OPT_SWITCH(DRNC RL
Reestablishment Optimization Switch)
Whether the RNC receives a complete message from
the UE during radio link (RL) reestablishment over
the Iur interface.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 215


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is turned on. The RNC receives a


complete message from the UE in the preceding
scenario.
0: This switch is turned off. The RNC does not receive
a complete message from the UE in the preceding
scenario.
4)URA2FACH_OVERLAP_CELLUPT_PROC_SWI
TCH
Whether the RAN processes a cell update procedure
caused by cell reselection, periodic cell update, UE re-
entering service area, or an RLC unrecoverable error
during a state transition from URA_PCH to
CELL_FACH.
1: This switch is turned on. The RAN processes the
cell update procedure during a state transition from
URA_PCH to CELL_FACH.
0: This switch is turned off. The RAN determines that
the cell update procedure is abnormally triggered and
therefore does not process the procedure. As a result,
the cell update procedure times out, and the UE's
connection is abnormally released, increasing the call
drop rate.
5)RB_SETUP_F2D_USE_AM_RLC_SWITCH
Whether the RNC sends a RADIO BEARER SETUP
message in AM to a UE in the CELL_FACH state.
1: This switch is turned on. The RNC sends a RADIO
BEARER SETUP message in AM to a UE in the
CELL_FACH state. Therefore, those UEs that cannot
receive this message in UM can now correctly receive
this message.
0: This switch is turned off. The RNC sends a RADIO
BEARER SETUP message in UM to a UE in the
CELL_FACH state.
6)RB_RECFG_D2F_USE_AM_RLC_SWITCH
Whether the RNC sends a RADIO BEARER
RECONFIGURATION message in AM to a UE that is
transitioning from the CELL_DCH state to the
CELL_FACH state.
1: This switch is turned on. The RNC sends a RADIO
BEARER RECONFIGURATION message in AM to a
UE that is transitioning from the CELL_DCH state to
the CELL_FACH state. Therefore, those UEs that
cannot receive this message in UM can now correctly
receive this message.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 216


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. The RNC sends a RADIO


BEARER RECONFIGURATION message in UM to a
UE that is transitioning from the CELL_DCH state to
the CELL_FACH state.
7)RB_RECFG_F2D_USE_AM_RLC_SWITCH
Whether the RNC sends a RADIO BEARER
RECONFIGURATION message in AM to a UE that is
transitioning from the CELL_FACH state to the
CELL_DCH state.
1: This switch is turned on. The RNC sends a RADIO
BEARER RECONFIGURATION message in AM to a
UE that is transitioning from the CELL_FACH state to
the CELL_DCH state. Therefore, those UEs that
cannot receive this message in UM can now correctly
receive this message.
0: This switch is turned off. The RNC sends a RADIO
BEARER RECONFIGURATION message in UM to a
UE that is transitioning from the CELL_FACH state to
the CELL_DCH state.
8)RRC_UE_USER_SMOOTH_OPT_SWITCH
Whether the RNC corrects the values of the
VS.CellDCHUEs.RNC and VS.CellFACHUEs.RNC
counters when performing smooth operations at 3:00
a.m..
1: This switch is turned on. The RNC corrects the
values of the VS.CellDCHUEs.RNC and
VS.CellFACHUEs.RNC counters when performing
smooth operations at 3:00 a.m.. That is, the RNC does
not calculate the number of UEs that are processing a
signaling procedure into these two counters.
0: This switch is turned off. The RNC calculates the
number of UEs that are processing a signaling
procedure into these two counters when performing
smooth operations at 3:00 a.m.. The RNC calculates
the number of these UEs into these two counters again
after their signaling procedures are complete.
9)TRNC_LOAD_CTRL_SWITCH
Whether to enable load sharing for the SRNS
relocations and incoming Inter-RAT handover
procedure.
1: This switch is turned on. During an SRNS
relocation and incoming Inter-RAT handover
procedure, the signaling and SCCP are processed by
the same signaling subsystem, and load sharing is
implemented between signaling subsystems.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 217


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. During an SRNS


relocation and incoming Inter-RAT handover
procedure, the signaling is processed by the signaling
subsystem that carries the serving cell.
10)IU_SIG_REL_PCH_PAGING_SWITCH(Page
UEs When UEs Release Its CS/PS Connection)
Whether the RNC sends paging messages to UEs in
the CELL_PCH and URA_PCH states when these
UEs are releasing their connections in the CS or PS
domain.
1: This switch is turned on. The RNC sends paging
messages to UEs in the CELL_PCH and URA_PCH
states when these UEs are releasing their connections
in the CS or PS domain.
0: This switch is turned off. The RNC does not send
paging messages to UEs in the CELL_PCH and
URA_PCH states when these UEs are releasing their
connections in the CS or PS domain.
11)CPC_OPT_FOR_RLSETUP_SWITCH(CPC
Configuration Optimization Switch During RL Setup)
Whether the CPC is configured in an optimized way
during radio link (RL) setup.
1: This switch is set to on. The CPC is configured in
an optimized way during RL setup. That is, if the RL
activation time is carried, the RNC forwards the RL
activation time to the NodeB during RL setup. If the
RL activation time is not carried, the RNC changes
the Enabling Delay to 128.
0: This switch is set to off. The CPC is not configured
in an optimized way. That is, the RNC neither
forwards the RL activation time to the NodeB during
RL setup nor changes the Enabling Delay.
12) D2P_L2DEACT_FAIL_OPT_SWITCH
(Optimization Switch for L2 Deactivation Failure
During D2P)
Whether to release the RRC connection after an L2
deactivation failure during the D2P state transition.
This switch is set to off by default.
0: This switch is turned off. The RRC connection is
released after an L2 deactivation failure.
1: This switch is turned on. The RRC connection is
not released after an L2 deactivation failure. The UE
stays in the CELL_PCH or URA_PCH state, and the
dedicated channel is released.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 218


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

13)EFACH_RRC_REG_CMP_SWITCH(E-FACH
RRC Registration Compatibility Switch)
Whether special UEs use the E-FACH to carry their
RRC CONNECTION SETUP messages when the cell
is enabled with E-FACH.
1: This switch is set to on. the RNC retransmits the
last RRC CONNECTION SETUP message on the E-
FACH if special users do not respond to the RRC
CONNECTION SETUP message on the FACH. If the
UE returns an RRC CONNECTION SETUP CMP
message, the UE stays in the CELL_DCH state during
data transmission.
0: This switch is set to off. no special processing is
performed on special users.
14)
P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITCH
(Discard Responses with Incorrect TRANSCIDs from
UEs During P2D)
Whether the RNC discards a RADIO BEARER
RECONFIGURATION COMPLETE message
received from a UE during P2D state transitions when
the value of the "RRC transaction identifier" IE in the
message is incorrect.
1: This switch is set to on. The RNC discards the
message and waits for the UE's response.
0: This switch is set to off. The RNC rolls back the
P2D state transition procedure.
15)
AMRC_ON_122_AMR_HHO_ROLL_BACK_SWIT
CH (HHO Rollback Switch for 12.2K AMR Services
with AMRC Enabled)
Whether the RNC performs rollback after 12.2 kbit/s
AMR-NB services experience hard handover failures
in the scenario where the narrowband AMRC function
takes effect.
0: This switch is set to off. The RNC does not perform
rollback after 12.2 kbit/s AMR-NB services
experience hard handover failures in the preceding
scenario.
1: This switch is set to on. The RNC performs
rollback after 12.2 kbit/s AMR-NB services
experience hard handover failures in the preceding
scenario.
16)RELOC_IN_RG_COMB_INDEX_ALLOC_SWIT
CH

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 219


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RNC allocates RG combination indexes


to radio links (RLs) for UEs in the CELL_DCH state
during UE-not-involved relocations.
1: This switch is turned on. The RNC allocates RG
combination indexes only to the RLs on the E-DCH
for UEs in the CELL_DCH state during UE-not-
involved relocations.
0: This switch is turned off. The RNC allocates RG
combination indexes to all RLs for UEs in the
CELL_DCH state during UE-not-involved
relocations.
17)SCM_CU_CROSS_SWITCH(Support
Concurrence of CM and Cell Update)
Whether the RNC supports the concurrence of the
compressed mode (CM) procedure and the cell update
procedure.
1: This switch is set to on. The RNC rolls back the
CM procedure and then processes the cell update
message.
0: This switch is set to off. The RNC does not support
the concurrence of the CM procedure and the cell
update procedure.
18)DRNC_HSPA_CM_OPT_SWITCH(Optimize
Procedures for HSPA UEs in CM Under the DRNC)
Whether to solve the problem that the radio link
reconfiguration re-initiated by the SRNC over the Iur
interface fails after the DRNC receives a RADIO
LINK RECONFIGURATION PREPARE message
(which carries the Transmission Gap Pattern Sequence
Information and HS-DSCH FDD Information IEs)
over the Iur interface.
1: This switch is set to on. the radio link
reconfiguration re-initiated by the SRNC over the Iur
interface is successful after the DRNC receives the
preceding RADIO LINK RECONFIGURATION
PREPARE message over the Iur interface.
0: This switch is set to off, the radio link
reconfiguration re-initiated by the SRNC over the Iur
interface fails after the DRNC receives the preceding
RADIO LINK RECONFIGURATION PREPARE
message over the Iur interface.
19)IUB_TRANSID_OPT_SWITCH(Optimize
TransID Allocation for Iub Messages)
Whether the RNC allocates TransIDs to Iub interface
messages in an optimized way.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 220


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is set to on. the RNC allocates


TransIDs independently to each NodeB to prevent the
message out-of-order problem caused by NodeBs'
responses carrying the same TransID.
0: This switch is set to off. the RNC allocates a set of
TransIDs to the Iub interface messages for all
NodeBs.
20)L2_ENHENCE_RECFG_OPT_SWITCH
Whether the RNC correctly reconfigures the
parameters related to the enhanced L2 feature in the
following scenario: The UE has established a service
and the service uses the enhanced L2 feature; the UE
initiates a second service and the second service
experiences a cell update failure during its setup and is
rolled back.
When this switch is set to on, the RNC correctly
configures the parameters related to the enhanced L2
feature and correctly processes the service setup and
cell update rollback in the preceding scenario.
When this switch is set to off, the RNC cannot
correctly configure the parameters related to the
enhanced L2 feature, and consequently call drops
occur.
21)ASYN_RL_REEST_OPT_SWITCH
Radio link (RL) reestablishment optimization switch
for the scenario where the following functions are
enabled: RB fast setup function for RB setups
accompanied by DRDs with unchanged SRBs, and
hard handover fast reconfiguration.
When this switch is set to on, the RNC determines
whether a new RL is synchronized and whether the
CELL UPDATE message carries the reconfiguration
tag. If the RL is not synchronized and the CELL
UPDATE message does not carry the reconfiguration
tag, the RL is reestablished.
When this switch is set to off, the trigger conditions of
RL reestablishment remain unchanged.
22)RNC_IMSI_HO_OPT_SWITCH(IMSI-based
Handover Optimization Switch)
Whether the IMSI-based handover feature takes effect
in multioperator core network (MOCN) scenarios.
1: This switch is set to on. In MOCN scenarios, the
RNC releases the connections of the UEs using a
certain international mobile subscriber identity (IMSI)
after receiving a COMMON ID message from the CN.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 221


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is set to off. In MOCN scenarios, the


RNC does not release the connections of the UEs
using a certain IMSI after receiving a COMMON ID
message from the CN.
23)IUR_PRIQUEUE_INFO_TO_MODIFY_OPT_S
WITCH(Optimize the Priority Queue-Info-to-Modify
IE in RADIO LINK RECONFIGURATION
PREPARE Messages over Iur)
Whether the RADIO LINK RECONFIGURATION
PREPARE message over the Iur interface carries the
MAChsGuaranteedBitRate or DiscardTimer field in
the Priority Queue-Info-to-Modify IE when the field
will remain unchanged after the reconfiguration.
1: This switch is set to on. the RADIO LINK
RECONFIGURATION PREPARE message over the
Iur interface carries the MAChsGuaranteedBitRate or
DiscardTimer field in the Priority Queue-Info-to-
Modify IE when the field will remain unchanged after
the reconfiguration. In this case, the DRNC can
successfully reinitiate a relocation process after a UE
of Release 6 and earlier versions whose SRB is carried
on an HSDPA channel is relocated to the DRNC.
0: This switch is set to off. the RADIO LINK
RECONFIGURATION PREPARE message over the
Iur interface does not carry the Priority Queue-Info-to-
Modify IE when MAChsGuaranteedBitRate and
DiscardTimer remain unchanged after the
reconfiguration. In this case, a UE of Release 6 and
earlier versions whose SRB is carried on an HSDPA
channel fails to reinitiate a relocation process after
being relocated to the DRNC.
24)URA_PCH_LAC_RAC_CHG_NO_PAGING_SW
ITCH (No Paging Switch for LAC or SAC Change
During URA Update)
Whether paging is performed when the location area
code (LAC) or service area code (SAC) of the target
cell differs from that of the source cell during a
UTRAN registration area (URA) update.
1: This switch is set to on. Paging is not performed in
the preceding scenario.
0: This switch is set to off. Paging is performed in the
preceding scenario.
25)PAGING_OVERLAP_CU_OPT_SWITCH(Optimi
ze CS Paging During Cell Update)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 222


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RNC optimizes CS paging that occurs


during a cell update procedure.
1: This switch is set to on. The RNC optimizes CS
paging that occurs during a cell update procedure.
0: This switch is set to off. The RNC does not
optimize CS paging that occurs during a cell update
procedure, and as a result, the access delay of the CS
called partly is long.
26)SRVCC_RELOC_IN_USE_CS_KEY_SWITCH(S
RVCC Incoming Relocation Using CS CK Switch)
Whether UEs that are processing CS+PS combined
services use the CS cipher key (CK) during an
SRVCC incoming relocation.
1: This switch is set to on. UEs that are processing CS
+PS combined services use the CS CK during an
SRVCC incoming relocation. This prevents relocation
failures caused by incorrect CKs.
0: This switch is set to off. UEs that are processing CS
+PS combined services use the CK of the last released
domain during an SRVCC incoming relocation. If the
last released domain is PS, the incoming relocation
fails.
27)SOCKET_RECEIVE_DATA_CORRECT_SWITC
H(CBC Socket Receive Data Length Control Switch)
Whether the RNC correctly processes the messages
whose size is greater than 32 kbytes and that are sent
by the cell broadcast center (CBC) server.
1: This switch is set to on. The RNC correctly
processes the messages whose size is greater than 32
Kbytes and that are sent by the CBC server.
0: This switch is set to off. The RNC cannot correctly
process the messages whose size is greater than
32Kbytes and that are sent by the CBC server.
28)CU_PRI_OVERLAP_OTHER_PROC_SWITCH(
Preferentially Process Cell Update in Process
Overlap)
Whether the RNC preferentially processes the cell
update procedure when it overlaps with other
procedures.
1: When this switch is set to on, the RNC
preferentially processes the cell update procedure in
the preceding scenario.
0: When this switch is set to off, the original
processing method is used.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 223


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

29)INTERRAT2U_INTEG_PROTECT_OPT_SWITC
H(Integrity Protection Optimization Switch for
Incoming Inter-RAT Handovers)
Whether the optimized integrity protection function is
enabled for incoming L2U or G2U inter-RAT
handovers.
1: This switch is set to on. The integrity protection
function is immediately activated for SRB0 to SRB4
after the incoming L2U or G2U inter-RAT handover is
complete.
0: This switch is set to off. The integrity protection
function is activated only for SRB2 after the incoming
L2U or G2U inter-RAT handover is complete. The
integrity protection for other SRBs (SRB0, SRB1,
SRB3, and SRB4) is activated only after the UE sends
a message.
30)CS_PAGING_OVERLAP_RRC_OPT_SWITCH(
Optimize CS Paging During RRC Procedures)
Whether the UE will be paged again when an TMSI-
based CS paging procedure occurs in parallel with an
RRC connection setup procedure.
1: Indicates that this switch is set to ON. If the TMSI-
based CS paging procedure fails, the UE will be paged
again.
0: Indicates that this switch is set to OFF. If the TMSI-
based CS paging procedure fails, the UE will not be
paged again.
31)INTRA_NODEB_RLCC_INIT_CAP_OPT_SWIT
CH(Optimize the Rate upon NodeB RL Change for H
Services)
Whether the rate optimization policy is applied in the
scenario where the radio link (RL) for HSPA services
changes inside the NodeB.
1: This switch is set to on. The rate optimization
policy is applied in the scenario where the RL for
HSPA services changes inside the NodeB.
0: This switch is set to off. The rate optimization
policy is not applied in the scenario where the RL for
HSPA services changes inside the NodeB.
32)DRNC_RL_PARA_UPT_OPT_SWITCH(RL
Parameter Update Optimization Switch on RNC)
Whether the RL PARA UPT IND message over the
Iur interface can be correctly processed.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 224


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is set to on. The RL PARA UPT IND


message over the Iur interface can be correctly
processed.
0: This switch is set to off. The RL PARA UPT IND
message over the Iur interface cannot be correctly
processed.
Disuse Statement:In future versions, the
L2_ENHENCE_RECFG_OPT_SWITCH bit field
value under the OptimizationSwitch4 parameter will
be deleted. Instead, the function of
L2_ENHENCE_RECFG_OPT_SWITCH will be
controlled by
L2_ENHANCE_RECFG_OPT_SWITCH in
(OptimizationSwitch11, SET URRCTRLSWITCH).
GUI Value Range:
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH,
RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_S
WITCH, DRNC_RL_REEST_OPT_SWITCH,
URA2FACH_OVERLAP_CELLUPT_PROC_SWIT
CH, RB_SETUP_F2D_USE_AM_RLC_SWITCH,
RB_RECFG_D2F_USE_AM_RLC_SWITCH,
RB_RECFG_F2D_USE_AM_RLC_SWITCH,
RRC_UE_USER_SMOOTH_OPT_SWITCH,
TRNC_LOAD_CTRL_SWITCH,
IU_SIG_REL_PCH_PAGING_SWITCH,
CPC_OPT_FOR_RLSETUP_SWITCH,
D2P_L2DEACT_FAIL_OPT_SWITCH,
EFACH_RRC_REG_CMP_SWITCH,
P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITCH,
AMRC_ON_122_AMR_HHO_ROLL_BACK_SWIT
CH,
RELOC_IN_RG_COMB_INDEX_ALLOC_SWITC
H, SCM_CU_CROSS_SWITCH,
DRNC_HSPA_CM_OPT_SWITCH,
IUB_TRANSID_OPT_SWITCH,
L2_ENHENCE_RECFG_OPT_SWITCH,
ASYN_RL_REEST_OPT_SWITCH,
RNC_IMSI_HO_OPT_SWITCH,
IUR_PRIQUEUE_INFO_TO_MODIFY_OPT_SWIT
CH,
URA_PCH_LAC_RAC_CHG_NO_PAGING_SWIT
CH, PAGING_OVERLAP_CU_OPT_SWITCH,
SRVCC_RELOC_IN_USE_CS_KEY_SWITCH,
SOCKET_RECEIVE_DATA_CORRECT_SWITCH,
CU_PRI_OVERLAP_OTHER_PROC_SWITCH,
INTERRAT2U_INTEG_PROTECT_OPT_SWITCH,
CS_PAGING_OVERLAP_RRC_OPT_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 225


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

INTRA_NODEB_RLCC_INIT_CAP_OPT_SWITCH
, DRNC_RL_PARA_UPT_OPT_SWITCH
Unit: None
Actual Value Range:
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH,
RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_S
WITCH,
DRNC_RL_REEST_OPT_SWITCH,
URA2FACH_OVERLAP_CELLUPT_PROC_SWIT
CH,
RB_SETUP_F2D_USE_AM_RLC_SWITCH,
RB_RECFG_D2F_USE_AM_RLC_SWITCH,
RB_RECFG_F2D_USE_AM_RLC_SWITCH,
RRC_UE_USER_SMOOTH_OPT_SWITCH,
TRNC_LOAD_CTRL_SWITCH,
IU_SIG_REL_PCH_PAGING_SWITCH,
CPC_OPT_FOR_RLSETUP_SWITCH,
D2P_L2DEACT_FAIL_OPT_SWITCH,
EFACH_RRC_REG_CMP_SWITCH,
P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITCH,
AMRC_ON_122_AMR_HHO_ROLL_BACK_SWIT
CH,
RELOC_IN_RG_COMB_INDEX_ALLOC_SWITC
H,
SCM_CU_CROSS_SWITCH,
DRNC_HSPA_CM_OPT_SWITCH,
IUB_TRANSID_OPT_SWITCH,
L2_ENHENCE_RECFG_OPT_SWITCH,
ASYN_RL_REEST_OPT_SWITCH,
RNC_IMSI_HO_OPT_SWITCH,
IUR_PRIQUEUE_INFO_TO_MODIFY_OPT_SWIT
CH,
URA_PCH_LAC_RAC_CHG_NO_PAGING_SWIT
CH,
PAGING_OVERLAP_CU_OPT_SWITCH,
SRVCC_RELOC_IN_USE_CS_KEY_SWITCH,
SOCKET_RECEIVE_DATA_CORRECT_SWITCH,
CU_PRI_OVERLAP_OTHER_PROC_SWITCH,
INTERRAT2U_INTEG_PROTECT_OPT_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 226


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

CS_PAGING_OVERLAP_RRC_OPT_SWITCH,
INTRA_NODEB_RLCC_INIT_CAP_OPT_SWITCH
,
DRNC_RL_PARA_UPT_OPT_SWITCH
Default Value:
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH:
0,RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_
SWITCH:0,DRNC_RL_REEST_OPT_SWITCH:
1,URA2FACH_OVERLAP_CELLUPT_PROC_SWI
TCH:0,RB_SETUP_F2D_USE_AM_RLC_SWITCH:
0,RB_RECFG_D2F_USE_AM_RLC_SWITCH:
0,RB_RECFG_F2D_USE_AM_RLC_SWITCH:
0,RRC_UE_USER_SMOOTH_OPT_SWITCH:
1,TRNC_LOAD_CTRL_SWITCH:
0,IU_SIG_REL_PCH_PAGING_SWITCH:
0,CPC_OPT_FOR_RLSETUP_SWITCH:
1,D2P_L2DEACT_FAIL_OPT_SWITCH:
0,EFACH_RRC_REG_CMP_SWITCH:
0,P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITC
H:
0,AMRC_ON_122_AMR_HHO_ROLL_BACK_SWI
TCH:
0,RELOC_IN_RG_COMB_INDEX_ALLOC_SWIT
CH:0,SCM_CU_CROSS_SWITCH:
0,DRNC_HSPA_CM_OPT_SWITCH:
0,IUB_TRANSID_OPT_SWITCH:
0,L2_ENHENCE_RECFG_OPT_SWITCH:
0,ASYN_RL_REEST_OPT_SWITCH:
0,RNC_IMSI_HO_OPT_SWITCH:
0,IUR_PRIQUEUE_INFO_TO_MODIFY_OPT_SWI
TCH:
0,URA_PCH_LAC_RAC_CHG_NO_PAGING_SWI
TCH:0,PAGING_OVERLAP_CU_OPT_SWITCH:
0,SRVCC_RELOC_IN_USE_CS_KEY_SWITCH:
1,SOCKET_RECEIVE_DATA_CORRECT_SWITCH
:1,CU_PRI_OVERLAP_OTHER_PROC_SWITCH:
0,INTERRAT2U_INTEG_PROTECT_OPT_SWITC
H:0,CS_PAGING_OVERLAP_RRC_OPT_SWITCH:
0,INTRA_NODEB_RLCC_INIT_CAP_OPT_SWITC
H:0,DRNC_RL_PARA_UPT_OPT_SWITCH:1

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 227


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Optimiz BSC691 SET None None Meaning:


ationSwi 0 URRCT 1)RB_RLREEST_AM_TRB_RLC_REEST_SWITC
tch4 RLSWI H(Reestablish TRB RLC in AM for RL Reestablish)
TCH
When radio link (RL) reestablishment is triggered
during RB related procedures, the encryption
parameters configured for the RNC become
inconsistent with those configured for the UE if the
following conditions are met: The RB related
procedure succeeds; the TRB is in acknowledged
mode (AM) or the size of the RLC PDU changes in
AM; the RLC entity is not reestablished for the TRB.
As a result, data transmission fails on the user plane,
and the TRB is reset. This parameter specifies whether
the RNC reestablishes the RLC entity for TRBs that
use AM in the preceding scenario.
1: This switch is turned on. The RLC entity is
reestablished for the TRB in the preceding scenario.
0: This switch is turned off. The RLC entity is not
reestablished for the TRB in the preceding scenario.
2)RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_
SWITCH(Optimize RL Reestablishment for UM
TRB)
When RL reestablishment is triggered during an RB
setup procedure in unacknowledged mode (UM), the
encryption parameters for the RNC and UE cannot be
reconfigured. As a result, after the RL is reestablished,
data transmission fails on the user plane because the
encryption parameters configured for the RNC are
inconsistent with those configured for the UE.
Services are interrupted. This parameter specifies
whether the RNC reestablishes the RL for TRBs that
use UM in the preceding scenario.
1: This switch is turned on. If the TRB has been
established for the UE, RL reestablishment is not
performed in the preceding scenario even if its trigger
conditions are met.
0: This switch is turned off. RL reestablishment is
performed in the preceding scenario when its trigger
conditions are met.
3)DRNC_RL_REEST_OPT_SWITCH(DRNC RL
Reestablishment Optimization Switch)
Whether the RNC receives a complete message from
the UE during radio link (RL) reestablishment over
the Iur interface.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 228


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is turned on. The RNC receives a


complete message from the UE in the preceding
scenario.
0: This switch is turned off. The RNC does not receive
a complete message from the UE in the preceding
scenario.
4)URA2FACH_OVERLAP_CELLUPT_PROC_SWI
TCH
Whether the RAN processes a cell update procedure
caused by cell reselection, periodic cell update, UE re-
entering service area, or an RLC unrecoverable error
during a state transition from URA_PCH to
CELL_FACH.
1: This switch is turned on. The RAN processes the
cell update procedure during a state transition from
URA_PCH to CELL_FACH.
0: This switch is turned off. The RAN determines that
the cell update procedure is abnormally triggered and
therefore does not process the procedure. As a result,
the cell update procedure times out, and the UE's
connection is abnormally released, increasing the call
drop rate.
5)RB_SETUP_F2D_USE_AM_RLC_SWITCH
Whether the RNC sends a RADIO BEARER SETUP
message in AM to a UE in the CELL_FACH state.
1: This switch is turned on. The RNC sends a RADIO
BEARER SETUP message in AM to a UE in the
CELL_FACH state. Therefore, those UEs that cannot
receive this message in UM can now correctly receive
this message.
0: This switch is turned off. The RNC sends a RADIO
BEARER SETUP message in UM to a UE in the
CELL_FACH state.
6)RB_RECFG_D2F_USE_AM_RLC_SWITCH
Whether the RNC sends a RADIO BEARER
RECONFIGURATION message in AM to a UE that is
transitioning from the CELL_DCH state to the
CELL_FACH state.
1: This switch is turned on. The RNC sends a RADIO
BEARER RECONFIGURATION message in AM to a
UE that is transitioning from the CELL_DCH state to
the CELL_FACH state. Therefore, those UEs that
cannot receive this message in UM can now correctly
receive this message.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 229


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. The RNC sends a RADIO


BEARER RECONFIGURATION message in UM to a
UE that is transitioning from the CELL_DCH state to
the CELL_FACH state.
7)RB_RECFG_F2D_USE_AM_RLC_SWITCH
Whether the RNC sends a RADIO BEARER
RECONFIGURATION message in AM to a UE that is
transitioning from the CELL_FACH state to the
CELL_DCH state.
1: This switch is turned on. The RNC sends a RADIO
BEARER RECONFIGURATION message in AM to a
UE that is transitioning from the CELL_FACH state to
the CELL_DCH state. Therefore, those UEs that
cannot receive this message in UM can now correctly
receive this message.
0: This switch is turned off. The RNC sends a RADIO
BEARER RECONFIGURATION message in UM to a
UE that is transitioning from the CELL_FACH state to
the CELL_DCH state.
8)RRC_UE_USER_SMOOTH_OPT_SWITCH
Whether the RNC corrects the values of the
VS.CellDCHUEs.RNC and VS.CellFACHUEs.RNC
counters when performing smooth operations at 3:00
a.m..
1: This switch is turned on. The RNC corrects the
values of the VS.CellDCHUEs.RNC and
VS.CellFACHUEs.RNC counters when performing
smooth operations at 3:00 a.m.. That is, the RNC does
not calculate the number of UEs that are processing a
signaling procedure into these two counters.
0: This switch is turned off. The RNC calculates the
number of UEs that are processing a signaling
procedure into these two counters when performing
smooth operations at 3:00 a.m.. The RNC calculates
the number of these UEs into these two counters again
after their signaling procedures are complete.
9)TRNC_LOAD_CTRL_SWITCH
Whether to enable load sharing for the SRNS
relocations and incoming Inter-RAT handover
procedure.
1: This switch is turned on. During an SRNS
relocation and incoming Inter-RAT handover
procedure, the signaling and SCCP are processed by
the same signaling subsystem, and load sharing is
implemented between signaling subsystems.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 230


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is turned off. During an SRNS


relocation and incoming Inter-RAT handover
procedure, the signaling is processed by the signaling
subsystem that carries the serving cell.
10)IU_SIG_REL_PCH_PAGING_SWITCH(Page
UEs When UEs Release Its CS/PS Connection)
Whether the RNC sends paging messages to UEs in
the CELL_PCH and URA_PCH states when these
UEs are releasing their connections in the CS or PS
domain.
1: This switch is turned on. The RNC sends paging
messages to UEs in the CELL_PCH and URA_PCH
states when these UEs are releasing their connections
in the CS or PS domain.
0: This switch is turned off. The RNC does not send
paging messages to UEs in the CELL_PCH and
URA_PCH states when these UEs are releasing their
connections in the CS or PS domain.
11)CPC_OPT_FOR_RLSETUP_SWITCH(CPC
Configuration Optimization Switch During RL Setup)
Whether the CPC is configured in an optimized way
during radio link (RL) setup.
1: This switch is set to on. The CPC is configured in
an optimized way during RL setup. That is, if the RL
activation time is carried, the RNC forwards the RL
activation time to the NodeB during RL setup. If the
RL activation time is not carried, the RNC changes
the Enabling Delay to 128.
0: This switch is set to off. The CPC is not configured
in an optimized way. That is, the RNC neither
forwards the RL activation time to the NodeB during
RL setup nor changes the Enabling Delay.
12) D2P_L2DEACT_FAIL_OPT_SWITCH
(Optimization Switch for L2 Deactivation Failure
During D2P)
Whether to release the RRC connection after an L2
deactivation failure during the D2P state transition.
This switch is set to off by default.
0: This switch is turned off. The RRC connection is
released after an L2 deactivation failure.
1: This switch is turned on. The RRC connection is
not released after an L2 deactivation failure. The UE
stays in the CELL_PCH or URA_PCH state, and the
dedicated channel is released.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 231


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

13)EFACH_RRC_REG_CMP_SWITCH(E-FACH
RRC Registration Compatibility Switch)
Whether special UEs use the E-FACH to carry their
RRC CONNECTION SETUP messages when the cell
is enabled with E-FACH.
1: This switch is set to on. the RNC retransmits the
last RRC CONNECTION SETUP message on the E-
FACH if special users do not respond to the RRC
CONNECTION SETUP message on the FACH. If the
UE returns an RRC CONNECTION SETUP CMP
message, the UE stays in the CELL_DCH state during
data transmission.
0: This switch is set to off. no special processing is
performed on special users.
14)
P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITCH
(Discard Responses with Incorrect TRANSCIDs from
UEs During P2D)
Whether the RNC discards a RADIO BEARER
RECONFIGURATION COMPLETE message
received from a UE during P2D state transitions when
the value of the "RRC transaction identifier" IE in the
message is incorrect.
1: This switch is set to on. The RNC discards the
message and waits for the UE's response.
0: This switch is set to off. The RNC rolls back the
P2D state transition procedure.
15)
AMRC_ON_122_AMR_HHO_ROLL_BACK_SWIT
CH (HHO Rollback Switch for 12.2K AMR Services
with AMRC Enabled)
Whether the RNC performs rollback after 12.2 kbit/s
AMR-NB services experience hard handover failures
in the scenario where the narrowband AMRC function
takes effect.
0: This switch is set to off. The RNC does not perform
rollback after 12.2 kbit/s AMR-NB services
experience hard handover failures in the preceding
scenario.
1: This switch is set to on. The RNC performs
rollback after 12.2 kbit/s AMR-NB services
experience hard handover failures in the preceding
scenario.
16)RELOC_IN_RG_COMB_INDEX_ALLOC_SWIT
CH

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 232


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RNC allocates RG combination indexes


to radio links (RLs) for UEs in the CELL_DCH state
during UE-not-involved relocations.
1: This switch is turned on. The RNC allocates RG
combination indexes only to the RLs on the E-DCH
for UEs in the CELL_DCH state during UE-not-
involved relocations.
0: This switch is turned off. The RNC allocates RG
combination indexes to all RLs for UEs in the
CELL_DCH state during UE-not-involved
relocations.
17)SCM_CU_CROSS_SWITCH(Support
Concurrence of CM and Cell Update)
Whether the RNC supports the concurrence of the
compressed mode (CM) procedure and the cell update
procedure.
1: This switch is set to on. The RNC rolls back the
CM procedure and then processes the cell update
message.
0: This switch is set to off. The RNC does not support
the concurrence of the CM procedure and the cell
update procedure.
18)DRNC_HSPA_CM_OPT_SWITCH(Optimize
Procedures for HSPA UEs in CM Under the DRNC)
Whether to solve the problem that the radio link
reconfiguration re-initiated by the SRNC over the Iur
interface fails after the DRNC receives a RADIO
LINK RECONFIGURATION PREPARE message
(which carries the Transmission Gap Pattern Sequence
Information and HS-DSCH FDD Information IEs)
over the Iur interface.
1: This switch is set to on. the radio link
reconfiguration re-initiated by the SRNC over the Iur
interface is successful after the DRNC receives the
preceding RADIO LINK RECONFIGURATION
PREPARE message over the Iur interface.
0: This switch is set to off, the radio link
reconfiguration re-initiated by the SRNC over the Iur
interface fails after the DRNC receives the preceding
RADIO LINK RECONFIGURATION PREPARE
message over the Iur interface.
19)IUB_TRANSID_OPT_SWITCH(Optimize
TransID Allocation for Iub Messages)
Whether the RNC allocates TransIDs to Iub interface
messages in an optimized way.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 233


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is set to on. the RNC allocates


TransIDs independently to each NodeB to prevent the
message out-of-order problem caused by NodeBs'
responses carrying the same TransID.
0: This switch is set to off. the RNC allocates a set of
TransIDs to the Iub interface messages for all
NodeBs.
20)L2_ENHENCE_RECFG_OPT_SWITCH
Whether the RNC correctly reconfigures the
parameters related to the enhanced L2 feature in the
following scenario: The UE has established a service
and the service uses the enhanced L2 feature; the UE
initiates a second service and the second service
experiences a cell update failure during its setup and is
rolled back.
When this switch is set to on, the RNC correctly
configures the parameters related to the enhanced L2
feature and correctly processes the service setup and
cell update rollback in the preceding scenario.
When this switch is set to off, the RNC cannot
correctly configure the parameters related to the
enhanced L2 feature, and consequently call drops
occur.
21)ASYN_RL_REEST_OPT_SWITCH
Radio link (RL) reestablishment optimization switch
for the scenario where the following functions are
enabled: RB fast setup function for RB setups
accompanied by DRDs with unchanged SRBs, and
hard handover fast reconfiguration.
When this switch is set to on, the RNC determines
whether a new RL is synchronized and whether the
CELL UPDATE message carries the reconfiguration
tag. If the RL is not synchronized and the CELL
UPDATE message does not carry the reconfiguration
tag, the RL is reestablished.
When this switch is set to off, the trigger conditions of
RL reestablishment remain unchanged.
22)RNC_IMSI_HO_OPT_SWITCH(IMSI-based
Handover Optimization Switch)
Whether the IMSI-based handover feature takes effect
in multioperator core network (MOCN) scenarios.
1: This switch is set to on. In MOCN scenarios, the
RNC releases the connections of the UEs using a
certain international mobile subscriber identity (IMSI)
after receiving a COMMON ID message from the CN.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 234


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

0: This switch is set to off. In MOCN scenarios, the


RNC does not release the connections of the UEs
using a certain IMSI after receiving a COMMON ID
message from the CN.
23)IUR_PRIQUEUE_INFO_TO_MODIFY_OPT_S
WITCH(Optimize the Priority Queue-Info-to-Modify
IE in RADIO LINK RECONFIGURATION
PREPARE Messages over Iur)
Whether the RADIO LINK RECONFIGURATION
PREPARE message over the Iur interface carries the
MAChsGuaranteedBitRate or DiscardTimer field in
the Priority Queue-Info-to-Modify IE when the field
will remain unchanged after the reconfiguration.
1: This switch is set to on. the RADIO LINK
RECONFIGURATION PREPARE message over the
Iur interface carries the MAChsGuaranteedBitRate or
DiscardTimer field in the Priority Queue-Info-to-
Modify IE when the field will remain unchanged after
the reconfiguration. In this case, the DRNC can
successfully reinitiate a relocation process after a UE
of Release 6 and earlier versions whose SRB is carried
on an HSDPA channel is relocated to the DRNC.
0: This switch is set to off. the RADIO LINK
RECONFIGURATION PREPARE message over the
Iur interface does not carry the Priority Queue-Info-to-
Modify IE when MAChsGuaranteedBitRate and
DiscardTimer remain unchanged after the
reconfiguration. In this case, a UE of Release 6 and
earlier versions whose SRB is carried on an HSDPA
channel fails to reinitiate a relocation process after
being relocated to the DRNC.
24)URA_PCH_LAC_RAC_CHG_NO_PAGING_SW
ITCH (No Paging Switch for LAC or SAC Change
During URA Update)
Whether paging is performed when the location area
code (LAC) or service area code (SAC) of the target
cell differs from that of the source cell during a
UTRAN registration area (URA) update.
1: This switch is set to on. Paging is not performed in
the preceding scenario.
0: This switch is set to off. Paging is performed in the
preceding scenario.
25)PAGING_OVERLAP_CU_OPT_SWITCH(Optimi
ze CS Paging During Cell Update)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 235


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

Whether the RNC optimizes CS paging that occurs


during a cell update procedure.
1: This switch is set to on. The RNC optimizes CS
paging that occurs during a cell update procedure.
0: This switch is set to off. The RNC does not
optimize CS paging that occurs during a cell update
procedure, and as a result, the access delay of the CS
called partly is long.
26)SRVCC_RELOC_IN_USE_CS_KEY_SWITCH(S
RVCC Incoming Relocation Using CS CK Switch)
Whether UEs that are processing CS+PS combined
services use the CS cipher key (CK) during an
SRVCC incoming relocation.
1: This switch is set to on. UEs that are processing CS
+PS combined services use the CS CK during an
SRVCC incoming relocation. This prevents relocation
failures caused by incorrect CKs.
0: This switch is set to off. UEs that are processing CS
+PS combined services use the CK of the last released
domain during an SRVCC incoming relocation. If the
last released domain is PS, the incoming relocation
fails.
27)SOCKET_RECEIVE_DATA_CORRECT_SWITC
H(CBC Socket Receive Data Length Control Switch)
Whether the RNC correctly processes the messages
whose size is greater than 32 kbytes and that are sent
by the cell broadcast center (CBC) server.
1: This switch is set to on. The RNC correctly
processes the messages whose size is greater than 32
Kbytes and that are sent by the CBC server.
0: This switch is set to off. The RNC cannot correctly
process the messages whose size is greater than
32Kbytes and that are sent by the CBC server.
28)CU_PRI_OVERLAP_OTHER_PROC_SWITCH(
Preferentially Process Cell Update in Process
Overlap)
Whether the RNC preferentially processes the cell
update procedure when it overlaps with other
procedures.
1: When this switch is set to on, the RNC
preferentially processes the cell update procedure in
the preceding scenario.
0: When this switch is set to off, the original
processing method is used.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 236


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

29)INTERRAT2U_INTEG_PROTECT_OPT_SWITC
H(Integrity Protection Optimization Switch for
Incoming Inter-RAT Handovers)
Whether the optimized integrity protection function is
enabled for incoming L2U or G2U inter-RAT
handovers.
1: This switch is set to on. The integrity protection
function is immediately activated for SRB0 to SRB4
after the incoming L2U or G2U inter-RAT handover is
complete.
0: This switch is set to off. The integrity protection
function is activated only for SRB2 after the incoming
L2U or G2U inter-RAT handover is complete. The
integrity protection for other SRBs (SRB0, SRB1,
SRB3, and SRB4) is activated only after the UE sends
a message.
30)CS_PAGING_OVERLAP_RRC_OPT_SWITCH(
Optimize CS Paging During RRC Procedures)
Whether the UE will be paged again when an TMSI-
based CS paging procedure occurs in parallel with an
RRC connection setup procedure.
1: Indicates that this switch is set to ON. If the TMSI-
based CS paging procedure fails, the UE will be paged
again.
0: Indicates that this switch is set to OFF. If the TMSI-
based CS paging procedure fails, the UE will not be
paged again.
31)INTRA_NODEB_RLCC_INIT_CAP_OPT_SWIT
CH(Optimize the Rate upon NodeB RL Change for H
Services)
Whether the rate optimization policy is applied in the
scenario where the radio link (RL) for HSPA services
changes inside the NodeB.
1: This switch is set to on. The rate optimization
policy is applied in the scenario where the RL for
HSPA services changes inside the NodeB.
0: This switch is set to off. The rate optimization
policy is not applied in the scenario where the RL for
HSPA services changes inside the NodeB.
32)DRNC_RL_PARA_UPT_OPT_SWITCH(RL
Parameter Update Optimization Switch on RNC)
Whether the RL PARA UPT IND message over the
Iur interface can be correctly processed.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 237


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

1: This switch is set to on. The RL PARA UPT IND


message over the Iur interface can be correctly
processed.
0: This switch is set to off. The RL PARA UPT IND
message over the Iur interface cannot be correctly
processed.
Disuse Statement:In future versions, the
L2_ENHENCE_RECFG_OPT_SWITCH bit field
value under the OptimizationSwitch4 parameter will
be deleted. Instead, the function of
L2_ENHENCE_RECFG_OPT_SWITCH will be
controlled by
L2_ENHANCE_RECFG_OPT_SWITCH in
(OptimizationSwitch11, SET URRCTRLSWITCH).
GUI Value Range:
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH,
RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_S
WITCH, DRNC_RL_REEST_OPT_SWITCH,
URA2FACH_OVERLAP_CELLUPT_PROC_SWIT
CH, RB_SETUP_F2D_USE_AM_RLC_SWITCH,
RB_RECFG_D2F_USE_AM_RLC_SWITCH,
RB_RECFG_F2D_USE_AM_RLC_SWITCH,
RRC_UE_USER_SMOOTH_OPT_SWITCH,
TRNC_LOAD_CTRL_SWITCH,
IU_SIG_REL_PCH_PAGING_SWITCH,
CPC_OPT_FOR_RLSETUP_SWITCH,
D2P_L2DEACT_FAIL_OPT_SWITCH,
EFACH_RRC_REG_CMP_SWITCH,
P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITCH,
AMRC_ON_122_AMR_HHO_ROLL_BACK_SWIT
CH,
RELOC_IN_RG_COMB_INDEX_ALLOC_SWITC
H, SCM_CU_CROSS_SWITCH,
DRNC_HSPA_CM_OPT_SWITCH,
IUB_TRANSID_OPT_SWITCH,
L2_ENHENCE_RECFG_OPT_SWITCH,
ASYN_RL_REEST_OPT_SWITCH,
RNC_IMSI_HO_OPT_SWITCH,
IUR_PRIQUEUE_INFO_TO_MODIFY_OPT_SWIT
CH,
URA_PCH_LAC_RAC_CHG_NO_PAGING_SWIT
CH, PAGING_OVERLAP_CU_OPT_SWITCH,
SRVCC_RELOC_IN_USE_CS_KEY_SWITCH,
SOCKET_RECEIVE_DATA_CORRECT_SWITCH,
CU_PRI_OVERLAP_OTHER_PROC_SWITCH,
INTERRAT2U_INTEG_PROTECT_OPT_SWITCH,
CS_PAGING_OVERLAP_RRC_OPT_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 238


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

INTRA_NODEB_RLCC_INIT_CAP_OPT_SWITCH
, DRNC_RL_PARA_UPT_OPT_SWITCH
Unit: None
Actual Value Range:
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH,
RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_S
WITCH,
DRNC_RL_REEST_OPT_SWITCH,
URA2FACH_OVERLAP_CELLUPT_PROC_SWIT
CH,
RB_SETUP_F2D_USE_AM_RLC_SWITCH,
RB_RECFG_D2F_USE_AM_RLC_SWITCH,
RB_RECFG_F2D_USE_AM_RLC_SWITCH,
RRC_UE_USER_SMOOTH_OPT_SWITCH,
TRNC_LOAD_CTRL_SWITCH,
IU_SIG_REL_PCH_PAGING_SWITCH,
CPC_OPT_FOR_RLSETUP_SWITCH,
D2P_L2DEACT_FAIL_OPT_SWITCH,
EFACH_RRC_REG_CMP_SWITCH,
P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITCH,
AMRC_ON_122_AMR_HHO_ROLL_BACK_SWIT
CH,
RELOC_IN_RG_COMB_INDEX_ALLOC_SWITC
H,
SCM_CU_CROSS_SWITCH,
DRNC_HSPA_CM_OPT_SWITCH,
IUB_TRANSID_OPT_SWITCH,
L2_ENHENCE_RECFG_OPT_SWITCH,
ASYN_RL_REEST_OPT_SWITCH,
RNC_IMSI_HO_OPT_SWITCH,
IUR_PRIQUEUE_INFO_TO_MODIFY_OPT_SWIT
CH,
URA_PCH_LAC_RAC_CHG_NO_PAGING_SWIT
CH,
PAGING_OVERLAP_CU_OPT_SWITCH,
SRVCC_RELOC_IN_USE_CS_KEY_SWITCH,
SOCKET_RECEIVE_DATA_CORRECT_SWITCH,
CU_PRI_OVERLAP_OTHER_PROC_SWITCH,
INTERRAT2U_INTEG_PROTECT_OPT_SWITCH,

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 239


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 5 Parameters

Parame NE MML Feature Feature Description


ter ID Comma ID Name
nd

CS_PAGING_OVERLAP_RRC_OPT_SWITCH,
INTRA_NODEB_RLCC_INIT_CAP_OPT_SWITCH
,
DRNC_RL_PARA_UPT_OPT_SWITCH
Default Value:
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH:
0,RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_
SWITCH:0,DRNC_RL_REEST_OPT_SWITCH:
1,URA2FACH_OVERLAP_CELLUPT_PROC_SWI
TCH:0,RB_SETUP_F2D_USE_AM_RLC_SWITCH:
0,RB_RECFG_D2F_USE_AM_RLC_SWITCH:
0,RB_RECFG_F2D_USE_AM_RLC_SWITCH:
0,RRC_UE_USER_SMOOTH_OPT_SWITCH:
1,TRNC_LOAD_CTRL_SWITCH:
0,IU_SIG_REL_PCH_PAGING_SWITCH:
0,CPC_OPT_FOR_RLSETUP_SWITCH:
1,D2P_L2DEACT_FAIL_OPT_SWITCH:
0,EFACH_RRC_REG_CMP_SWITCH:
0,P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITC
H:
0,AMRC_ON_122_AMR_HHO_ROLL_BACK_SWI
TCH:
0,RELOC_IN_RG_COMB_INDEX_ALLOC_SWIT
CH:0,SCM_CU_CROSS_SWITCH:
0,DRNC_HSPA_CM_OPT_SWITCH:
0,IUB_TRANSID_OPT_SWITCH:
0,L2_ENHENCE_RECFG_OPT_SWITCH:
0,ASYN_RL_REEST_OPT_SWITCH:
0,RNC_IMSI_HO_OPT_SWITCH:
0,IUR_PRIQUEUE_INFO_TO_MODIFY_OPT_SWI
TCH:
0,URA_PCH_LAC_RAC_CHG_NO_PAGING_SWI
TCH:0,PAGING_OVERLAP_CU_OPT_SWITCH:
0,SRVCC_RELOC_IN_USE_CS_KEY_SWITCH:
1,SOCKET_RECEIVE_DATA_CORRECT_SWITCH
:1,CU_PRI_OVERLAP_OTHER_PROC_SWITCH:
0,INTERRAT2U_INTEG_PROTECT_OPT_SWITC
H:0,CS_PAGING_OVERLAP_RRC_OPT_SWITCH:
0,INTRA_NODEB_RLCC_INIT_CAP_OPT_SWITC
H:0,DRNC_RL_PARA_UPT_OPT_SWITCH:1

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 240


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

6 Counters

Table 6-1 Counters


Counter ID Counter Counter NE Feature ID Feature Name
Name Description

67179057 VS.AttCommTr Number of BSC6900 WRFD-010802 Inter RNC Cell


ChResIur.Tx Common Update
Transport
Channel
Resource
Requests Sent
by SRNC on Iur
Interface

67179057 VS.AttCommTr Number of BSC6910 WRFD-010802 Inter RNC Cell


ChResIur.Tx Common Update
Transport
Channel
Resource
Requests Sent
by SRNC on Iur
Interface

67179058 VS.SuccComm Number of BSC6900 WRFD-010802 Inter RNC Cell


TrChResIur.Rx Common Update
Transport
Channel
Resource
Responses
Received by
SRNC on Iur
Interface

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 241


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

67179058 VS.SuccComm Number of BSC6910 WRFD-010802 Inter RNC Cell


TrChResIur.Rx Common Update
Transport
Channel
Resource
Responses
Received by
SRNC on Iur
Interface

67179059 VS.FailCommT Number of BSC6900 WRFD-010802 Inter RNC Cell


rChResIur.NotS Common Update
upp.Rx Transport
Channel
Resource
Failures Due to
Transport
Resource
Unavailable on
Iur Interface for
SRNC

67179059 VS.FailCommT Number of BSC6910 WRFD-010802 Inter RNC Cell


rChResIur.NotS Common Update
upp.Rx Transport
Channel
Resource
Failures Due to
Transport
Resource
Unavailable on
Iur Interface for
SRNC

67179060 VS.AttRelCom Number of BSC6900 WRFD-010802 Inter RNC Cell


mTrChResIur.T Common Update
x Transport
Channel
Resource
Release
Requests on Iur
Interface from
SRNC

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 242


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

67179060 VS.AttRelCom Number of BSC6910 WRFD-010802 Inter RNC Cell


mTrChResIur.T Common Update
x Transport
Channel
Resource
Release
Requests on Iur
Interface from
SRNC

67179119 VS.IUR.AttCo Number of BSC6900 WRFD-010802 Inter RNC Cell


mTraChResDR Common Update
NC Transport
Channel
Resource
Requests on Iur
Interface for
DRNC

67179119 VS.IUR.AttCo Number of BSC6910 WRFD-010802 Inter RNC Cell


mTraChResDR Common Update
NC Transport
Channel
Resource
Requests on Iur
Interface for
DRNC

67179120 VS.IUR.SuccCo Number of BSC6900 WRFD-010802 Inter RNC Cell


mTraChResDR Common Update
NC Transport
Channel
Resource
Responses on
Iur Interface for
DRNC

67179120 VS.IUR.SuccCo Number of BSC6910 WRFD-010802 Inter RNC Cell


mTraChResDR Common Update
NC Transport
Channel
Resource
Responses on
Iur Interface for
DRNC

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 243


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

67179121 VS.IUR.FailCT Number of BSC6900 WRFD-010802 Inter RNC Cell


CRDRNC.NotS Common Update
upp Transport
Channel
Resource
Failures Due to
Transport
Resource
Unavailable on
Iur Interface for
DRNC

67179121 VS.IUR.FailCT Number of BSC6910 WRFD-010802 Inter RNC Cell


CRDRNC.NotS Common Update
upp Transport
Channel
Resource
Failures Due to
Transport
Resource
Unavailable on
Iur Interface for
DRNC

67179122 VS.IUR.AttRel Number of BSC6900 WRFD-010802 Inter RNC Cell


CoTrChResDR Common Update
NC Transport
Channel
Resource
Release
Requests on Iur
Interface for
DRNC

67179122 VS.IUR.AttRel Number of BSC6910 WRFD-010802 Inter RNC Cell


CoTrChResDR Common Update
NC Transport
Channel
Resource
Release
Requests on Iur
Interface for
DRNC

67180370 VS.CellUpdt.Co Number of BSC6900 WRFD-010801 Intra RNC Cell


nfirm CELL UPDATE WRFD-010802 Update
CONFIRM Inter RNC Cell
Messages from Update
SRNC for Cell

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 244


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

67180370 VS.CellUpdt.Co Number of BSC6910 WRFD-010801 Intra RNC Cell


nfirm CELL UPDATE WRFD-010802 Update
CONFIRM Inter RNC Cell
Messages from Update
SRNC for Cell

67180371 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt Successful Cell WRFD-010802 Update
Updates for Cell Inter RNC Cell
Update

67180371 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt Successful Cell WRFD-010802 Update
Updates for Cell Inter RNC Cell
Update

67180372 VS.AttCellUpdt Number of BSC6900 WRFD-010801 Intra RNC Cell


.Prd Periodical Cell WRFD-010802 Update
Updates for Cell Inter RNC Cell
Update

67180372 VS.AttCellUpdt Number of BSC6910 WRFD-010801 Intra RNC Cell


.Prd Periodical Cell WRFD-010802 Update
Updates for Cell Inter RNC Cell
Update

67180373 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.Resel Updates Due to WRFD-010802 Update
Cell Reselection Inter RNC Cell
for Cell Update

67180373 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.Resel Updates Due to WRFD-010802 Update
Cell Reselection Inter RNC Cell
for Cell Update

67180374 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.RSA Updates Due to WRFD-010802 Update
Re-Entering Inter RNC Cell
Service Area for Update
Cell

67180374 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.RSA Updates Due to WRFD-010802 Update
Re-Entering Inter RNC Cell
Service Area for Update
Cell

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 245


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

67180375 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.PageRsp Updates Due to WRFD-010802 Update
Paging Inter RNC Cell
Response for Update
Cell

67180375 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.PageRsp Updates Due to WRFD-010802 Update
Paging Inter RNC Cell
Response for Update
Cell

67180376 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.ULDataTrans Updates Due to WRFD-010802 Update
Uplink Data Inter RNC Cell
Transmission Update
for Cell

67180376 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.ULDataTrans Updates Due to WRFD-010802 Update
Uplink Data Inter RNC Cell
Transmission Update
for Cell

67180378 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.RLFail Updates Due to WRFD-010802 Update
Radio Link Inter RNC Cell
Failure for Cell Update

67180378 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.RLFail Updates Due to WRFD-010802 Update
Radio Link Inter RNC Cell
Failure for Cell Update

67180379 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.Prd Successful WRFD-010802 Update
Periodical Cell Inter RNC Cell
Updates for Cell Update

67180379 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.Prd Successful WRFD-010802 Update
Periodical Cell Inter RNC Cell
Updates for Cell Update

67180380 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.Resel Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
Cell Reselection Update
for Cell

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 246


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

67180380 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.Resel Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
Cell Reselection Update
for Cell

67180381 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.Rsa Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
Re-Entering Update
Service Area for
Cell

67180381 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.Rsa Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
Re-Entering Update
Service Area for
Cell

67180382 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.PageRsp Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
Paging Update
Response for
Cell

67180382 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.PageRsp Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
Paging Update
Response for
Cell

67180383 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.ULDataTrans Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
Uplink Data Update
Transmission
for Cell

67180383 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.ULDataTrans Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
Uplink Data Update
Transmission
for Cell

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 247


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

67180386 VS.CellUpdt.R Number of RRC BSC6900 WRFD-010801 Intra RNC Cell


RCRel Connection WRFD-010802 Update
Releases Due to Inter RNC Cell
Cell Update WRFD-010510
Update
Failure for Cell
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

67180386 VS.CellUpdt.R Number of RRC BSC6910 WRFD-010801 Intra RNC Cell


RCRel Connection WRFD-010802 Update
Releases Due to Inter RNC Cell
Cell Update WRFD-010510
Update
Failure for Cell
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

67180387 VS.RRC.ConnR Number of RRC BSC6900 WRFD-010510 3.4/6.8/13.6/27.


el.CellUpd Connection WRFD-010801 2Kbps RRC
Releases due to Connection and
Cell Update Radio Access
Failure in the Bearer
Case of RL Establishment
Failure for Cell and Release
Intra RNC Cell
Update

67180387 VS.RRC.ConnR Number of RRC BSC6910 WRFD-010510 3.4/6.8/13.6/27.


el.CellUpd Connection WRFD-010801 2Kbps RRC
Releases due to Connection and
Cell Update Radio Access
Failure in the Bearer
Case of RL Establishment
Failure for Cell and Release
Intra RNC Cell
Update

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 248


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

67180451 VS.AttURAUp Number of BSC6900 WRFD-010202 UE State in


d.Chg URA Updates WRFD-010901 Connected
Due to Change Mode (CELL-
of URA for Cell WRFD-010902 DCH, CELL-
PCH, URA-
PCH, CELL-
FACH)
Intra RNC URA
Update
Inter RNC URA
Update

67180451 VS.AttURAUp Number of BSC6910 WRFD-010202 UE State in


d.Chg URA Updates WRFD-010901 Connected
Due to Change Mode (CELL-
of URA for Cell WRFD-010902 DCH, CELL-
PCH, URA-
PCH, CELL-
FACH)
Intra RNC URA
Update
Inter RNC URA
Update

67180452 VS.AttURAUp Number of BSC6900 WRFD-010202 UE State in


d.Prd URA Updates WRFD-010901 Connected
Due to Periodic Mode (CELL-
URA Update WRFD-010902 DCH, CELL-
for Cell PCH, URA-
PCH, CELL-
FACH)
Intra RNC URA
Update
Inter RNC URA
Update

67180452 VS.AttURAUp Number of BSC6910 WRFD-010202 UE State in


d.Prd URA Updates WRFD-010901 Connected
Due to Periodic Mode (CELL-
URA Update WRFD-010902 DCH, CELL-
for Cell PCH, URA-
PCH, CELL-
FACH)
Intra RNC URA
Update
Inter RNC URA
Update

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 249


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

67180453 VS.SuccURAU Number of BSC6900 WRFD-010901 Intra RNC URA


pd.Chg Successful WRFD-010902 Update
URA Updates Inter RNC URA
Due to Change WRFD-010202
Update
of URA for Cell
UE State in
Connected
Mode (CELL-
DCH, CELL-
PCH, URA-
PCH, CELL-
FACH)

67180453 VS.SuccURAU Number of BSC6910 WRFD-010901 Intra RNC URA


pd.Chg Successful WRFD-010902 Update
URA Updates Inter RNC URA
Due to Change WRFD-010202
Update
of URA for Cell
UE State in
Connected
Mode (CELL-
DCH, CELL-
PCH, URA-
PCH, CELL-
FACH)

67180454 VS.SuccURAU Number of BSC6900 WRFD-010901 Intra RNC URA


pd.Prd Successful WRFD-010902 Update
URA Updates Inter RNC URA
Due to Periodic WRFD-010202
Update
URA Update
for Cell UE State in
Connected
Mode (CELL-
DCH, CELL-
PCH, URA-
PCH, CELL-
FACH)

67180454 VS.SuccURAU Number of BSC6910 WRFD-010901 Intra RNC URA


pd.Prd Successful WRFD-010902 Update
URA Updates Inter RNC URA
Due to Periodic WRFD-010202
Update
URA Update
for Cell UE State in
Connected
Mode (CELL-
DCH, CELL-
PCH, URA-
PCH, CELL-
FACH)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 250


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

67189767 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.RLFail Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
Radio Link Update
Failure for Cell

67189767 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.RLFail Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
Radio Link Update
Failure for Cell

67189768 VS.FailCellUpd Number of BSC6900 WRFD-010801 Intra RNC Cell


t.RLFail.NoRep Failed Cell WRFD-010802 Update
ly Updates Due to Inter RNC Cell
No Response Update
from UE for
Cell (Cell
Update Caused
by RL Failure)

67189768 VS.FailCellUpd Number of BSC6910 WRFD-010801 Intra RNC Cell


t.RLFail.NoRep Failed Cell WRFD-010802 Update
ly Updates Due to Inter RNC Cell
No Response Update
from UE for
Cell (Cell
Update Caused
by RL Failure)

67192569 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


Updates for Cell WRFD-010802 Update
Inter RNC Cell
Update

67192569 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


Updates for Cell WRFD-010802 Update
Inter RNC Cell
Update

67192570 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.ErrSRB Updates Due to WRFD-010802 Update
SRB RLC Inter RNC Cell
Unrecoverable Update
Error for Cell

67192570 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.ErrSRB Updates Due to WRFD-010802 Update
SRB RLC Inter RNC Cell
Unrecoverable Update
Error for Cell

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 251


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

67192571 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.ErrTRB Updates Due to WRFD-010802 Update
TRB RLC Inter RNC Cell
Unrecoverable Update
Error for Cell

67192571 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.ErrTRB Updates Due to WRFD-010802 Update
TRB RLC Inter RNC Cell
Unrecoverable Update
Error for Cell

67192572 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.ErrTRB Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
TRB RLC Update
Unrecoverable
Error for Cell

67192572 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.ErrTRB Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
TRB RLC Update
Unrecoverable
Error for Cell

67192573 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.MbmsRecv Updates Due to WRFD-010802 Update
MBMS Inter RNC Cell
Reception for WRFD-010616
Update
Cell
MBMS
Introduction
Package

67192573 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.MbmsRecv Updates Due to WRFD-010802 Update
MBMS Inter RNC Cell
Reception for WRFD-010616
Update
Cell
MBMS
Introduction
Package

67192574 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.MbmsRecv Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
MBMS WRFD-010616
Update
Reception for
Cell MBMS
Introduction
Package

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 252


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

67192574 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.MbmsRecv Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
MBMS WRFD-010616
Update
Reception for
Cell MBMS
Introduction
Package

67192575 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.MbmsPtpRbRe Updates Due to WRFD-010802 Update
q MBMS PtP RB Inter RNC Cell
Request for Cell WRFD-010616
Update
MBMS
Introduction
Package

67192575 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.MbmsPtpRbRe Updates Due to WRFD-010802 Update
q MBMS PtP RB Inter RNC Cell
Request for Cell WRFD-010616
Update
MBMS
Introduction
Package

67192576 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.MbmsPtpRb Successful Cell WRFD-010802 Update
Req Updates Due to Inter RNC Cell
MBMS PtP RB WRFD-010616
Update
Request for Cell
MBMS
Introduction
Package

67192576 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.MbmsPtpRb Successful Cell WRFD-010802 Update
Req Updates Due to Inter RNC Cell
MBMS PtP RB WRFD-010616
Update
Request for Cell
MBMS
Introduction
Package

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 253


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

67193610 VS.RRC.Rej.D Number of RRC BSC6900 WRFD-020101 Admission


LPower.Cong Connection WRFD-010510 Control
Rejects for Cell 3.4/6.8/13.6/27.
(DL Power 2Kbps RRC
Congestion) Connection and
Radio Access
Bearer
Establishment
and Release

67193610 VS.RRC.Rej.D Number of RRC BSC6910 WRFD-020101 Admission


LPower.Cong Connection WRFD-010510 Control
Rejects for Cell 3.4/6.8/13.6/27.
(DL Power 2Kbps RRC
Congestion) Connection and
Radio Access
Bearer
Establishment
and Release

67193612 VS.RAB.FailEs Number of BSC6900 WRFD-020101 Admission


tabCS.DLPower Failed CS RAB WRFD-010510 Control
.Cong Establishments 3.4/6.8/13.6/27.
for Cell (DL 2Kbps RRC
Power Connection and
Congestion) Radio Access
Bearer
Establishment
and Release

67193612 VS.RAB.FailEs Number of BSC6910 WRFD-020101 Admission


tabCS.DLPower Failed CS RAB WRFD-010510 Control
.Cong Establishments 3.4/6.8/13.6/27.
for Cell (DL 2Kbps RRC
Power Connection and
Congestion) Radio Access
Bearer
Establishment
and Release

67193614 VS.RAB.FailEs Number of BSC6900 WRFD-020101 Admission


tabPS.DLPower Failed PS RAB WRFD-010510 Control
.Cong Establishments 3.4/6.8/13.6/27.
for Cell (DL 2Kbps RRC
Power Connection and
Congestion) Radio Access
Bearer
Establishment
and Release

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 254


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

67193614 VS.RAB.FailEs Number of BSC6910 WRFD-020101 Admission


tabPS.DLPower Failed PS RAB WRFD-010510 Control
.Cong Establishments 3.4/6.8/13.6/27.
for Cell (DL 2Kbps RRC
Power Connection and
Congestion) Radio Access
Bearer
Establishment
and Release

73423781 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.ErrSRB Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
SRB RLC Update
Unrecoverable
Error for Cell

73423781 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.ErrSRB Successful Cell WRFD-010802 Update
Updates Due to Inter RNC Cell
SRB RLC Update
Unrecoverable
Error for Cell

73424125 VS.FailCellUpd Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


t.ErrSRB.NoRe Update Failures WRFD-010802 Update
ply.FACH due to No Inter RNC Cell
Response from Update
UEs in the
CELL_FACH
State (SRB
RLC ERROR)
for Cell

73424125 VS.FailCellUpd Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


t.ErrSRB.NoRe Update Failures WRFD-010802 Update
ply.FACH due to No Inter RNC Cell
Response from Update
UEs in the
CELL_FACH
State (SRB
RLC ERROR)
for Cell

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 255


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73424126 VS.FailCellUpd Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


t.ErrTRB.NoRe Update Failures WRFD-010802 Update
ply.FACH due to No Inter RNC Cell
Response from Update
UEs in the
CELL_FACH
State (TRB
RLC
ERROR)for
Cell

73424126 VS.FailCellUpd Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


t.ErrTRB.NoRe Update Failures WRFD-010802 Update
ply.FACH due to No Inter RNC Cell
Response from Update
UEs in the
CELL_FACH
State (TRB
RLC
ERROR)for
Cell

73426327 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.OrgConvCall.P Update WRFD-010802 Update
CH Attempts for Inter RNC Cell
Cell Update
(Originating
Conversational
Call)

73426327 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.OrgConvCall.P Update WRFD-010802 Update
CH Attempts for Inter RNC Cell
Cell Update
(Originating
Conversational
Call)

73426328 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.TmConvCall.P Update WRFD-010802 Update
CH Attempts for Inter RNC Cell
Cell Update
(Terminating
Conversational
Call)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 256


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73426328 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.TmConvCall.P Update WRFD-010802 Update
CH Attempts for Inter RNC Cell
Cell Update
(Terminating
Conversational
Call)

73426329 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.EmgCall.PCH Update WRFD-010802 Update
Attempts for Inter RNC Cell
Cell Update
(Emergency
Call)

73426329 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.EmgCall.PCH Update WRFD-010802 Update
Attempts for Inter RNC Cell
Cell Update
(Emergency
Call)

73426330 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.OrgConvCall Successful Cell WRFD-010802 Update
.PCH Updates for Cell Inter RNC Cell
(Originating Update
Conversational
Call)

73426330 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.OrgConvCall Successful Cell WRFD-010802 Update
.PCH Updates for Cell Inter RNC Cell
(Originating Update
Conversational
Call)

73426331 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.TmConvCall. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Terminating Update
Conversational
Call)

73426331 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.TmConvCall. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Terminating Update
Conversational
Call)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 257


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73426332 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.EmgCall.PC Successful Cell WRFD-010802 Update
H Updates for Cell Inter RNC Cell
(Emergency Update
Call)

73426332 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.EmgCall.PC Successful Cell WRFD-010802 Update
H Updates for Cell Inter RNC Cell
(Emergency Update
Call)

73426812 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.OrgStrCall.PC Update WRFD-010802 Update
H Attempts for Inter RNC Cell
Cell Update
(Originating
Streaming Call)

73426812 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.OrgStrCall.PC Update WRFD-010802 Update
H Attempts for Inter RNC Cell
Cell Update
(Originating
Streaming Call)

73426813 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.OrgInterCall.P Update WRFD-010802 Update
CH Attempts for Inter RNC Cell
Cell Update
(Originating
Interactive Call)

73426813 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.OrgInterCall.P Update WRFD-010802 Update
CH Attempts for Inter RNC Cell
Cell Update
(Originating
Interactive Call)

73426814 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.OrgBkgCall.PC Update WRFD-010802 Update
H Attempts for Inter RNC Cell
Cell Update
(Originating
Background
Call)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 258


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73426814 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.OrgBkgCall.PC Update WRFD-010802 Update
H Attempts for Inter RNC Cell
Cell Update
(Originating
Background
Call)

73426815 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.OrgSubCall.PC Update WRFD-010802 Update
H Attempts for Inter RNC Cell
Cell Update
(Originating
Subscribed
traffic Call)

73426815 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.OrgSubCall.PC Update WRFD-010802 Update
H Attempts for Inter RNC Cell
Cell Update
(Originating
Subscribed
traffic Call)

73426816 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.OrgHhPrSig.P Update WRFD-010802 Update
CH Attempts for Inter RNC Cell
Cell Update
(Originating
High Priority
Signalling)

73426816 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.OrgHhPrSig.P Update WRFD-010802 Update
CH Attempts for Inter RNC Cell
Cell Update
(Originating
High Priority
Signalling)

73426817 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.OrgLwPrSig.P Update WRFD-010802 Update
CH Attempts for Inter RNC Cell
Cell Update
(Originating
Low Priority
Signalling)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 259


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73426817 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.OrgLwPrSig.P Update WRFD-010802 Update
CH Attempts for Inter RNC Cell
Cell Update
(Originating
Low Priority
Signalling)

73426818 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.TmStrCall.PC Update WRFD-010802 Update
H Attempts for Inter RNC Cell
Cell Update
(Terminating
Streaming Call)

73426818 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.TmStrCall.PC Update WRFD-010802 Update
H Attempts for Inter RNC Cell
Cell Update
(Terminating
Streaming Call)

73426819 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.TmInterCall.P Update WRFD-010802 Update
CH Attempts for Inter RNC Cell
Cell Update
(Terminating
Interactive Call)

73426819 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.TmInterCall.P Update WRFD-010802 Update
CH Attempts for Inter RNC Cell
Cell Update
(Terminating
Interactive Call)

73426820 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.TmBkgCall.PC Update WRFD-010802 Update
H Attempts for Inter RNC Cell
Cell Update
(Terminating
Background
Call)

73426820 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.TmBkgCall.PC Update WRFD-010802 Update
H Attempts for Inter RNC Cell
Cell Update
(Terminating
Background
Call)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 260


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73426821 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.TmHhPrSig.PC Update WRFD-010802 Update
H Attempts for Inter RNC Cell
Cell Update
(Terminating
High Priority
Signalling)

73426821 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.TmHhPrSig.PC Update WRFD-010802 Update
H Attempts for Inter RNC Cell
Cell Update
(Terminating
High Priority
Signalling)

73426822 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.TmLwPrSig.P Update WRFD-010802 Update
CH Attempts for Inter RNC Cell
Cell Update
(Terminating
Low Priority
Signalling)

73426822 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.TmLwPrSig.P Update WRFD-010802 Update
CH Attempts for Inter RNC Cell
Cell Update
(Terminating
Low Priority
Signalling)

73426823 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.Unknown.PCH Update WRFD-010802 Update
Attempts for Inter RNC Cell
Cell Update
(Terminating -
cause unknown)

73426823 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.Unknown.PCH Update WRFD-010802 Update
Attempts for Inter RNC Cell
Cell Update
(Terminating -
cause unknown)

73426824 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.Reg.PCH Update WRFD-010802 Update
Attempts for Inter RNC Cell
Cell Update
(Registration)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 261


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73426824 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.Reg.PCH Update WRFD-010802 Update
Attempts for Inter RNC Cell
Cell Update
(Registration)

73426825 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.Detach.PCH Update WRFD-010802 Update
Attempts for Inter RNC Cell
Cell (Detach) Update

73426825 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.Detach.PCH Update WRFD-010802 Update
Attempts for Inter RNC Cell
Cell (Detach) Update

73426826 VS.AttCellUpdt Number of Cell BSC6900 WRFD-010801 Intra RNC Cell


.Other.PCH Update WRFD-010802 Update
Attempts for Inter RNC Cell
Cell (Other) Update

73426826 VS.AttCellUpdt Number of Cell BSC6910 WRFD-010801 Intra RNC Cell


.Other.PCH Update WRFD-010802 Update
Attempts for Inter RNC Cell
Cell (Other) Update

73426827 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.OrgStrCall.P Successful Cell WRFD-010802 Update
CH Updates for Cell Inter RNC Cell
(Originating Update
Streaming Call)

73426827 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.OrgStrCall.P Successful Cell WRFD-010802 Update
CH Updates for Cell Inter RNC Cell
(Originating Update
Streaming Call)

73426828 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.OrgInterCall. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Originating Update
Interactive Call)

73426828 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.OrgInterCall. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Originating Update
Interactive Call)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 262


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73426829 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.OrgBkgCall. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Originating Update
Background
Call)

73426829 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.OrgBkgCall. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Originating Update
Background
Call)

73426830 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.OrgSubCall.P Successful Cell WRFD-010802 Update
CH Updates for Cell Inter RNC Cell
(Originating Update
Subscribed
traffic Call)

73426830 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.OrgSubCall.P Successful Cell WRFD-010802 Update
CH Updates for Cell Inter RNC Cell
(Originating Update
Subscribed
traffic Call)

73426831 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.OrgHhPrSig. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Originating Update
High Priority
Signalling)

73426831 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.OrgHhPrSig. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Originating Update
High Priority
Signalling)

73426832 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.OrgLwPrSig. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Originating Update
Low Priority
Signalling)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 263


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73426832 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.OrgLwPrSig. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Originating Update
Low Priority
Signalling)

73426833 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.TmStrCall.P Successful Cell WRFD-010802 Update
CH Updates for Cell Inter RNC Cell
(Terminating Update
Streaming Call)

73426833 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.TmStrCall.P Successful Cell WRFD-010802 Update
CH Updates for Cell Inter RNC Cell
(Terminating Update
Streaming Call)

73426834 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.TmInterCall. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Terminating Update
Interactive Call)

73426834 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.TmInterCall. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Terminating Update
Interactive Call)

73426835 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.TmBkgCall.P Successful Cell WRFD-010802 Update
CH Updates for Cell Inter RNC Cell
(Terminating Update
Background
Call)

73426835 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.TmBkgCall.P Successful Cell WRFD-010802 Update
CH Updates for Cell Inter RNC Cell
(Terminating Update
Background
Call)

73426836 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.TmHhPrSig. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Terminating Update
High Priority
Signalling)

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 264


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73426836 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.TmHhPrSig. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Terminating Update
High Priority
Signalling)

73426837 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.TmLwPrSig. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Terminating Update
Low Priority
Signalling)

73426837 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.TmLwPrSig. Successful Cell WRFD-010802 Update
PCH Updates for Cell Inter RNC Cell
(Terminating Update
Low Priority
Signalling)

73426838 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.Unknown.PC Successful Cell WRFD-010802 Update
H Updates for Cell Inter RNC Cell
(Terminating - Update
cause unknown)

73426838 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.Unknown.PC Successful Cell WRFD-010802 Update
H Updates for Cell Inter RNC Cell
(Terminating - Update
cause unknown)

73426839 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.Reg.PCH Successful Cell WRFD-010802 Update
Updates for Cell Inter RNC Cell
(Registration) Update

73426839 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.Reg.PCH Successful Cell WRFD-010802 Update
Updates for Cell Inter RNC Cell
(Registration) Update

73426840 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.Detach.PCH Successful Cell WRFD-010802 Update
Updates for Cell Inter RNC Cell
(Detach) Update

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 265


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73426840 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.Detach.PCH Successful Cell WRFD-010802 Update
Updates for Cell Inter RNC Cell
(Detach) Update

73426841 VS.SuccCellUp Number of BSC6900 WRFD-010801 Intra RNC Cell


dt.Other.PCH Successful Cell WRFD-010802 Update
Updates for Cell Inter RNC Cell
(Other) Update

73426841 VS.SuccCellUp Number of BSC6910 WRFD-010801 Intra RNC Cell


dt.Other.PCH Successful Cell WRFD-010802 Update
Updates for Cell Inter RNC Cell
(Other) Update

73426843 VS.CellUpdt.Co Number of BSC6900 WRFD-010801 Intra RNC Cell


nfirm.PageAnd CELL UPDATE WRFD-010802 Update
UlData.PCH CONFIRM Inter RNC Cell
Messages Sent Update
by the RNC for
Cell (for the
CELL UPDATE
Messages with
the Cause Value
"uplink data
transmission" or
"paging
response")

73426843 VS.CellUpdt.Co Number of BSC6910 WRFD-010801 Intra RNC Cell


nfirm.PageAnd CELL UPDATE WRFD-010802 Update
UlData.PCH CONFIRM Inter RNC Cell
Messages Sent Update
by the RNC for
Cell (for the
CELL UPDATE
Messages with
the Cause Value
"uplink data
transmission" or
"paging
response")

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 266


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73427913 VS.RRC.AttCo Number of CS BSC6900 WRFD-010510 3.4/6.8/13.6/27.


nnEstab.CellUp RRC WRFD-010801 2Kbps RRC
d.DSCR.CS Connection Connection and
Setup Requests Radio Access
in the DSCR Bearer
Procedure Establishment
Triggered by and Release
Process Intra RNC Cell
Overlapping for Update
Cell

73427913 VS.RRC.AttCo Number of CS BSC6910 WRFD-010510 3.4/6.8/13.6/27.


nnEstab.CellUp RRC WRFD-010801 2Kbps RRC
d.DSCR.CS Connection Connection and
Setup Requests Radio Access
in the DSCR Bearer
Procedure Establishment
Triggered by and Release
Process Intra RNC Cell
Overlapping for Update
Cell

73427914 VS.RRC.AttCo Number of PS BSC6900 WRFD-010510 3.4/6.8/13.6/27.


nnEstab.CellUp RRC WRFD-010801 2Kbps RRC
d.DSCR.PS Connection Connection and
Setup Requests Radio Access
in the DSCR Bearer
Procedure Establishment
Triggered by and Release
Process Intra RNC Cell
Overlapping for Update
Cell

73427914 VS.RRC.AttCo Number of PS BSC6910 WRFD-010510 3.4/6.8/13.6/27.


nnEstab.CellUp RRC WRFD-010801 2Kbps RRC
d.DSCR.PS Connection Connection and
Setup Requests Radio Access
in the DSCR Bearer
Procedure Establishment
Triggered by and Release
Process Intra RNC Cell
Overlapping for Update
Cell

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 267


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73427915 VS.RRC.AttCo Number of RRC BSC6900 WRFD-010510 3.4/6.8/13.6/27.


nnEstab.CellUp Connection WRFD-010801 2Kbps RRC
d.DSCR.Other Setup Requests Connection and
in the DSCR Radio Access
Procedure Bearer
Triggered by Establishment
Process and Release
Overlapping for Intra RNC Cell
Cell (Others) Update

73427915 VS.RRC.AttCo Number of RRC BSC6910 WRFD-010510 3.4/6.8/13.6/27.


nnEstab.CellUp Connection WRFD-010801 2Kbps RRC
d.DSCR.Other Setup Requests Connection and
in the DSCR Radio Access
Procedure Bearer
Triggered by Establishment
Process and Release
Overlapping for Intra RNC Cell
Cell (Others) Update

73427916 VS.RRC.AttCo Number of RRC BSC6900 WRFD-010510 3.4/6.8/13.6/27.


nnEstab.CellUp Connection WRFD-010801 2Kbps RRC
d.DSCR.Service Setup Requests Connection and
in the DSCR Radio Access
Procedure Bearer
Triggered by Establishment
Process and Release
Overlapping for Intra RNC Cell
Cell (Service) Update

73427916 VS.RRC.AttCo Number of RRC BSC6910 WRFD-010510 3.4/6.8/13.6/27.


nnEstab.CellUp Connection WRFD-010801 2Kbps RRC
d.DSCR.Service Setup Requests Connection and
in the DSCR Radio Access
Procedure Bearer
Triggered by Establishment
Process and Release
Overlapping for Intra RNC Cell
Cell (Service) Update

73428051 VS.Cell.Updt.E Number of BSC6900 WRFD-010801 Intra RNC Cell


cNo.0 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 0 for
Cell

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 268


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73428051 VS.Cell.Updt.E Number of BSC6910 WRFD-010801 Intra RNC Cell


cNo.0 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 0 for
Cell

73428052 VS.Cell.Updt.E Number of BSC6900 WRFD-010801 Intra RNC Cell


cNo.1 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 1 for
Cell

73428052 VS.Cell.Updt.E Number of BSC6910 WRFD-010801 Intra RNC Cell


cNo.1 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 1 for
Cell

73428053 VS.Cell.Updt.E Number of BSC6900 WRFD-010801 Intra RNC Cell


cNo.2 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 2 for
Cell

73428053 VS.Cell.Updt.E Number of BSC6910 WRFD-010801 Intra RNC Cell


cNo.2 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 2 for
Cell

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 269


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73428054 VS.Cell.Updt.E Number of BSC6900 WRFD-010801 Intra RNC Cell


cNo.3 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 3 for
Cell

73428054 VS.Cell.Updt.E Number of BSC6910 WRFD-010801 Intra RNC Cell


cNo.3 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 3 for
Cell

73428055 VS.Cell.Updt.E Number of BSC6900 WRFD-010801 Intra RNC Cell


cNo.4 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 4 for
Cell

73428055 VS.Cell.Updt.E Number of BSC6910 WRFD-010801 Intra RNC Cell


cNo.4 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 4 for
Cell

73428056 VS.Cell.Updt.E Number of BSC6900 WRFD-010801 Intra RNC Cell


cNo.5 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 5 for
Cell

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 270


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73428056 VS.Cell.Updt.E Number of BSC6910 WRFD-010801 Intra RNC Cell


cNo.5 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 5 for
Cell

73428057 VS.Cell.Updt.E Number of BSC6900 WRFD-010801 Intra RNC Cell


cNo.6 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 6 for
Cell

73428057 VS.Cell.Updt.E Number of BSC6910 WRFD-010801 Intra RNC Cell


cNo.6 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 6 for
Cell

73428058 VS.Cell.Updt.E Number of BSC6900 WRFD-010801 Intra RNC Cell


cNo.7 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 7 for
Cell

73428058 VS.Cell.Updt.E Number of BSC6910 WRFD-010801 Intra RNC Cell


cNo.7 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 7 for
Cell

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 271


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 6 Counters

Counter ID Counter Counter NE Feature ID Feature Name


Name Description

73428059 VS.Cell.Updt.E Number of BSC6900 WRFD-010801 Intra RNC Cell


cNo.8 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 8 for
Cell

73428059 VS.Cell.Updt.E Number of BSC6910 WRFD-010801 Intra RNC Cell


cNo.8 Times the Update
Ec/No Indicated
in a CELL
UPDATE
Message Falls
into Range 8 for
Cell

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 272


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 7 Glossary

7 Glossary

For the acronyms, abbreviations, terms, and definitions, see the Glossary.

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 273


Copyright Huawei Technologies Co., Ltd.
WCDMA RAN
URA-Cell Update Feature Parameter Description 8 Reference Documents

8 Reference Documents

1. 3GPP TS 25.331, "Radio Resource Control (RRC); protocol specification"


2. 3GPP TS 25.931, "UTRAN Functions, Examples on Signaling Procedures"
3. 3GPP TS 25.413, "UTRAN Iu interface RANAP signaling"
4. UE Behaviors in Idle Mode Feature Parameter Description
5. BSC6900 UMTS Initial Configuration Guide
6. BSC6910 UMTS Initial Configuration Guide

Issue 01 (2016-04-28) Huawei Proprietary and Confidential 274


Copyright Huawei Technologies Co., Ltd.

Das könnte Ihnen auch gefallen