Beruflich Dokumente
Kultur Dokumente
AMOF FJELL Process Technology AS Idrettsvegen 103, N-5353 Straume, Norway VAT: NO 939 083 197 MVA
T: (+47) 56 33 43 00 F: (+47) 56 33 43 01 E: post@amof-fjell.com www.amof-fjell.com
Legacy controlled extraction screw conveyor. The
When Atlas-Stord in the year 2000 closed discs are mounted on a heavy central
down disc drier manufacturing in Norway shaft with a highly efficient condensate
after almost 50 years, we engaged senior removal system integrated. Scraper bars
personnel with 150 year experience from ensure agitation between the discs, which
design, manufacturing and commissioning is necessary for efficient evaporation. The
of more than 2000 disc driers all over the moisture evaporated from the product is
world. We took over robotic disc welding collected in a high top vapour dome, and
equipment from Atlas-Stords workshop, continuously removed.
and added a dash of innovative young
engineering resources using state of the Scoope of Supply
art design and analysis techniques. The Turbo Disc replacement rotors for
result was the Fjell Turbo Disc Drier with existing disc drier installations from all
a unique durable design of the stays recognised OEMs.
providing the strength towards internal Complete Fjell Turbo Disc Driers with
steam pressure, efficient manufacturing all necessary auxiliary equipment.
techniques, and optimised flow of material Complete key ready process plants
and vapour for maximum heat exchange. including feed hoppers, grinders,
conveyors, pumps, steam/condensate
Design Features equipment, vapour and dust handling
The Fjell Turbo Disc Drier is designed systems, product discharge, pellets
for heating by steam (6-10 bar), hot water mills, storage and bagging systems.
or thermal oil. The largest heating surface Associated process equipment like
is the rotor, but additional heating surface evaporators, coagulators, presses,
is available as an option on the stator. The decanters, tricanters and separators.
product to be dried is slowly, but All driers can be designed for vacuum
vigorously, transported from inlet- to outlet drying.
end by a paddle system mounted on the All small driers up to TD140-1500 can
disc periphery. Product discharge is be delivered for food processing
normally done continuously by a speed meeting EHEDG guidelines.
AMOF FJELL Process Technology AS Idrettsvegen 103, N-5353 Straume, Norway VAT: NO 939 083 197 MVA
T: (+47) 56 33 43 00 F: (+47) 56 33 43 01 E: post@amof-fjell.com www.amof-fjell.com