Beruflich Dokumente
Kultur Dokumente
Academic:
University of Aveiro MIEQ 2010/2015;
Erasmus studies Universit de Pau et des Pays de lAdour2014;
Thesis: Production of stigmasterol enriched extracts by supercritical
Pedro Flores Martins fluid extraction of biomass"
Thesis classification: 20/20
Overall classification: 16/20
About me:
In a brief overview, I think of myself as a Relevant courses:
devoted and motivated person attracted to Polymers (17/20)
dynamic environments, always seeking to Chemical Reaction Engineering (16/20)
improve personal and technical skills. As a Separation Process (19/20);
professional, I try to give my best in every task Instrumentation and Process Control (18/20);
that I am entrusted to. Chemical Engineering Practical (17/20)
Regarding professional preferences, the main Chemical Engineering Project (18/20)
subjects that arouse my best interests are in the
Professional Development:
field of R&D (Product and Process), Engineering,
Manufacturing and also Environmental impact CICECO Center for research in ceramics & composite materials
reduction. 3 R&D works published in the field of chemical process, centering
in optimization studies, modeling and economic analysis.
Process
Lean Manufacturing
Optimization
Design of
GMP
experiments
Project
P&IDs
Management
Procurement HAZOP
Experience:
Hovione FarmaCincia, SA
Associate Engineer, Design Engineering, (09/2016 current)
Hovione is an active pharmaceutical ingredients manufacturer for more than 50 years. I was an
associate engineer in the Design Engineering department, and was actively supporting the Asias
Design Engineering director in different projects (Environmental impact and production expansion). I
managed to be the link between the user area and higher ups, and was responsible for several
technical tasks, such as project conceptualization, mass and energy balances, equipment procurement
and SAP management, project budgeting and timeline issuance.
Faurecia Automotive seats, Ltd.
Manufacturing Trainee (11/2015 08/2016)
Faurecia is a global leader in providing efficient and innovative solutions in the automotive industry. I
have joined Faurecia as a trainee in the manufacturing of flexible polyurethane foams and actively
supported the continuous improvement of the production process. I was responsible for the
implementation and configuration of an anti-error system allied in the production line in order to
significantly reduce the scrap produced. At the end, the revenue of this system, after thorough
parametrization, allowed it to be self-paid in one year after start of production.
Training period in the laboratory of products analysis and quality control. Measurement of several
physical properties for product control, such as: pH; Viscosity; determination of the solid content;
density
Various:
Seminars Chemical products security at nacional and international levels SIAM (Soluciones
Informaticas Ambientales), Oporto, March 2016
PARALAB/DANI: New Challenges in Gas-phase chromatography
Oporto, May 2015
CICECO Conferences: NANOTECHNOLOGY FROM THE LAB TO THE INDUSTRY, Aveiro, April
2015
XX Portuguese-Galician meeting of Chemistry Poster presentation
Porto, November 2014
Volunteering Vice coordinator in: Ncleo de Estudantes de Engenharia Qumica da Universidade de Aveiro
(NEEQu AAUAv) 2013;
2/2