Beruflich Dokumente
Kultur Dokumente
Completion Tools
For over 30 years, the owners of Wireline Solutions have
been involved in the manufacturing and distribution of high
quality, low cost completions tools for the oil and gas
industry. The goal of the company is to provide tools and
equipment that exceed required applications while at the
same time provide real cost savings to customers. The vast
experience of the owners in both the domestic and
international markets enable them to provide solutions to
the various problems encountered in todays complicated
business. All tools in the catalog are field proven over many
generations. In addition, specialized tools for specialized
problems can be engineered and built to customers
specifications. For more information or help with your
completions or wireline needs, please feel free to contact us.
Table of Contents
LANDING NIPPLES 1
CIRCULATING SLEEVES 2
HYDRO TRIP SUBS and 3
WIRELINE ENTRY PUMP OUT PLUGS
ON OFF TOOLS 4
BLANKING PLUGS 5
CHECK VALVES and 6
INSTRUMENT HANGERS
CROSSOVERS 7
SHEAR OUT SAFETY JOINTS 8
WIRELINE SERVICE TOOLS 9
Landing Nipples
WX Profile Nipple
(selective)
The Model WX Profile Nipple offers an expanded versatility to
downhole selection. Any desired number of WX Nipples can be
placed in the production string, thereby offering an unlimited number of
positions for setting and locking surface controls.
A
APPLICATIONS
Land blanking plugs to shut in well or
to test the production tubing.
Land Velocity Type Safety Valves.
Land equalizing check valves.
Land circulating blanking plugs.
Land chokes to reduce surface flowing pressures.
Land instrument hangers with geophysical devices
such as pressure and temperature recorders.
All premium threads available.
Available in Box x Pin EUE.
**B
C MATERIAL SELECTION
4140 / L80
82,000 Yield
Resist Corrosion in Sour Gas Environments
A
APPLICATIONS
Land blanking plugs to shut in well or
to test the production tubing.
Land Velocity Type Safety Valves.
Land equalizing check valves.
Land circulating blanking plugs.
Land chokes to reduce surface flowing pressures.
Land instrument hangers with geophysical devices
such as pressure and temperature recorders.
Restricted I.D. catches tools dropped during wireline work.
All premium threads available.
Available in Box x Pin EUE.
*B
C MATERIAL SELECTION
4140 / L80
82,000 Yield
Resist Corrosion in Sour Gas Environments
*Length of nipple is as shown, varying with thread and bore size relationships.
WF Profile Nipple
(selective)
The Model WF Profile Nipple is a TOP NoGo Nipple that
Coupling provides for the location of various wireline flow control devices in
O.D. the production string.
APPLICATIONS
Land blanking plugs to shut in well or
to test the production tubing.
1.000 Land Velocity Type Safety Valves.
Land equalizing check valves.
Land circulating blanking plugs.
Land chokes to reduce surface flowing pressures.
Land instrument hangers with geophysical devices
such as pressure and temperature recorders.
**B
NoGo Base
C MATERIAL SELECTION
4140 / L80
82,000 Yield
Resist Corrosion in Sour Gas Environments
APPLICATIONS
Land blanking plugs to shut in well or
to test the production tubing.
1.000
Land Velocity Type Safety Valves.
Land equalizing check valves.
Land circulating blanking plugs.
Land chokes to reduce surface flowing pressures.
Land instrument hangers with geophysical devices
**B such as pressure and temperature recorders.
Restricted I.D. catches tools dropped during wireline work.
C All premium threads available.
MATERIAL SELECTION
4140 / L80
82,000 Yield
Resist Corrosion in Sour Gas Environments
NoGo Base
9C1M / 9 Chrome 1 Moly
80,000 Yield
NoGo
High Resistance to Corrosion in Sour Gas Environments
**Length of nipple is as shown, varying with thread and bore size relationships.
WHR Profile Nipple
(selective)
The Model WHR Profile Nipple offers a Nipple which can be
A used in heavy tubing applications. It offers various inside
diameters which allows well operator to selectively pick wherever
to locate the WHR Nipples in the tubing string. The blanking
plug offers a higher pressure rating than the normal weight tubing
blanking plugs.
APPLICATIONS
Land blanking plugs to shut in well or
to test the production tubing.
Land velocity sub surface safety valves.
Land bottom hole chokes, check valves, circulating
*B
blanking plugs, instrument hangers.
C All premium threads available.
MATERIAL SELECTION
4140 / L80
82,000 Yield
Resist Corrosion in Sour Gas Environments
* Length of nipple is as shown, varying with thread and bore size relationships.
** Part numbers shown are for EUE threads and L80 material.
WHRN Profile Nipple
(selective)
The Model WHRN Profile Nipple offers a Nipple which can be
used in heavy tubing applications. It is a Bottom NoGo Nipple so care
A must be taken when determining where to locate this Nipple. The
Nipple offers various inside diameters which allows well operator to
selectively pick a WHRN Bottom NoGo Nipple to meet his well
requirements. The blanking plug offers a higher pressure rating than
the normal weight tubing blanking plugs.
APPLICATIONS
Land blanking plugs to shut in well or
to test the production tubing.
Land velocity sub surface safety valves.
Land bottom hole chokes, check valves, circulating
*B blanking plugs, instrument hangers.
All premium threads available.
C
Restricted I.D. catches tools lost during wireline work.
MATERIAL SELECTION
4140 / L80
82,000 Yield
Resist Corrosion in Sour Gas Environments
* Length of nipple is as shown, varying with thread and bore size relationships.
** Part numbers shown are for EUE threads and L80 material.
Circulating Sleeves
WXO / WXD Circulating Sleeve
The Wireline Solutions Models WXO and WXD Circulating Sleeve is a down hole device, normally
screwed into the production tubing, that allows communication between the tubing and the casing.
The only difference between the WXO and WXD Sleeve is that the WXD Sleeve has twice the flow
area between the tubing and the casing.
The WXO and WXD Sleeve has replaceable upper and lower seals, which are easy and
inexpensive to replace. They can be of various elastomeric or non-elastomeric types.
The upper sub has a selective WX landing nipple profile machined into it to serve as a receptacle
for other flow control devices such as blanking plugs and separation tools. The lower sub has a
polished seal bore.
The WXO and WXD Sleeve can be installed at any point in the tubing string. More than one can
be installed without any loss of function. The sleeve can be selectively opened and closed no
matter what their positions.
The Wireline Solutions Model WB Shifting Tool is used to shift the WXO and WXD Sleeve open
and closed. The sleeve is designed so that normal wireline activities will not open or close the
sleeve inadvertently. Upward jarring closes the sleeve and downward jarring opens it.
APPLICATIONS
Displacing kill or completion fluid.
Allowing multiple zones to produce up one tubing string.
Selective testing of individual zones.
Selective stimulation of individual zones.
Circulation to kill the well.
Gas lifting the well
Landing a blanking plug in the profile in the upper sub to shut in the well, test the
tubing, or test the sleeve itself.
Circulating inhibitors or methanol.
WXO / WXD Circulating Sleeve
The WXO / WXD Circulating Sleeve provides a way to establish or shut off communication between the
tubing and the casing. Any number of sleeves may be run in a tubing string and any or all of them may be
opened or closed with a Self Releasing Positioning Tool (Model WB Shifting Tool). The only difference
between the WXO and WXD Sleeve is the WXD has twice the flow area between the tubing and the casing.
The Top Sub Connects to the tubing string. It contains a WX Style Locking Profile and Polish
Bore. It has an inclined shoulder which causes the WB Shifting Tool to release after the Inner
Sleeve reaches an up position. The lower end of the Top Sub is threaded to fit the Middle Sub and
is sealed by the Top Subs O-Ring.
The Middle Sub screws onto both the Top and Bottom Sub. It provides flow ports for
communication and provides for the positioning and sealing of the packing.
The Packing Sets consist of three separate groups. The Upper Packing is made up of two sets
off vee packing secured between two female steel adapters and separated by a male adapter or O-
ring. The Middle Set consists of a middle O-ring which is secured between two female steel
adapters and is held in place by split ring segments. The Bottom Set consists of two sets of vee
packing secured between two female steel adapters and separated by lower packing O-ring.
The Inner Sleeve fits inside the Middle and the Top and Bottom Subs. It has a collet latch for
positioning, an equalizing port, and flow ports for communication. The Shifting Key recesses are
inside either end of the Inner Sleeve, allowing the shifting tool to latch into and move the Inner
Sleeve either up or down.
The Bottom Sub screws onto the Middle Sub and a bottom O-ring seals this joint. It provides
three indents which position the closing sleeve and another inclined shoulder which positions the
closing sleeve and another inclined shoulder which releases the WB Shifting Tool after shifting.
The Bottom Sub also has a bottom polished bore. The lower end of the sub screws into the tubing
string.
The WXO and WXD Sleeve always opens down and closes up.
WXO / WXD Circulating Sleeve
Shifting Procedure
TO OPEN:
Using the correct B Shifting Tool or alternate manufacturers equivalent, place the tool on the
bottom of your wireline work string with the engaging (shifting) keys looking down. Go into hole to
proper depth of sleeve. Your Shifting Tool should engage the bottom of the Inner Sleeve at the
internal shifting shoulder.
Jar Down. The Inner Sleeve should move into the equalizing position. After equalized, continue
jarring down until sleeve is in full open position. At this time, the Shifting Tool should release and
fall through the Sleeve.
To check Sleeve to see if it is fully open, pull back up into Sleeve and try to engage Inner Sleeve.
If you cannot engage Inner Sleeve, it is fully open or shear pin is sheared on Shifting Tool. Come
out of hole and check Shifting Tool. If pin is not sheared, then you can assume Sleeve is shifted.
Flowing either the tubing or casing should affect both sides if Sleeve is open.
TO CLOSE:
Place Shifting Tool on bottom of wireline work string with shifting keys looking up. Go into hole
to a point where you are sure you have gone through Sleeve. Your Shifting Tool should engage the
top of the Inner Sleeve at the internal shifting shoulder.
Jar up and continue jarring up until the Inner Sleeve is shifting into the closed position. At this
time the Shifting Tool should release and move up hole when pulled.
To check Sleeve, drop back down into Sleeve and try to engage Inner Sleeve. If you cannot
engage, assume Sleeve is closed and come out of hole. Check shear pin on Shifting Tool.
Flowing either the tubing or casing should not affect the other side if Sleeve is closed.
WXO / WXD Circulating Sleeve
Working Instructions and Assembly
Use grease or pipe dope on all threaded connections and on all O-rings and Vee seals.
After a WXO / WXD sleeve has been pulled from the hole, it is recommended you change
the Vee Packing and O-rings and also check packing area before running it back downhole. The
Redress procedure is as follows:
(1) Place Bottom Sub of Sleeve in vice and secure. Place stand under Sleeve for support. Tap
with hammer at area where Top Sub screws onto Middle Housing. Place wrench on Top Sub
and break top connection. Using uniform torque, unscrew Top Sub from Middle Housing.
(2) Now place wrench on Middle Housing and break connection. Unscrew Middle Housing from
Bottom Sub. Shift Inner Sleeve out of Bottom Sub. Packing should remain in Middle Housing
when unscrewed and pulled off Inner Sleeve.
(3) Remove Vee Packing, Steel Rings, and O-rings from sleeve. Clean all parts, check for flow
cuts, check packing area and caliper area, check all threads taking special care of small
threads on top and bottom subs, and check O.D. of Inner Sleeve and Shifting Shoulder on
Inner Sleeve.
(4) After all parts are cleaned and inspected, place the Bottom Sub back into vice and secure.
Grease liberally. Shift Inner Sleeve into the first indent of Bottom Sub. Grease outside of
Inner Sleeve. Assemble Vee Packing, Steel Rings, and O-rings as detailed in the Assembly
Section. Slide Packing Assembly onto Inner Sleeve.
(5) Grease outside of Packing Assembly and inside the Middle Housing. There is a groove cut
inside the Middle Housing on one end. Face this end of Middle Housing toward you. One at
a time, place a Female Adapter Ring, then an O-ring, and another Female Ring in the Middle
Housing, pushing them down until they lay bottom out just below groove. Place Split
Segments in the Middle Housing as shown in the Assembly Section. Back up with another
Female Ring.
(6) Take Middle Housing, still having the end you worked on facing you, and make up on Bottom
Sub. The Inner Sleeve should remain out of the Middle Housing far enough that you can now
place remaining Vee Packing and Rings onto it. Next, take the sub and make up onto Middle.
(7) After Sleeve is completely made up and torqued, it should be shifted and pressure tested
before being run in the hole.
1.87 WXO Circulating Sleeve
w/ 2 3/8 EUE Pin X Pin
DESIGN FEATURES
1
Features a nipple profile and a packing bore
above and below the communication ports.
Ports can be closed without leaving any obstructions in the
tubing once the shifting operation is completed.
The Model B Shifting Tool is used to open (jarring down) or
close (jarring up) the WXO Circulating Sleeve.
2
All premium threads available.
3
Material: 4140, L80, 80K Yield / Optional 13% Chrome
Communication Ports
19.191
DESIGN FEATURES
Features a nipple profile and a packing bore
4.541
Communication Ports
22.116
3
4
ITEM PART NAME No. PART No.
REQ.
DESIGN FEATURES
Features a nipple profile and a packing bore
4.718
DESIGN FEATURES
Features a nipple profile and a packing bore
4.750
DESIGN FEATURES
1
Features a nipple profile and a packing bore
above and below the communication ports.
Ports can be closed without leaving any obstructions in the
tubing once the shifting operation is completed.
The Model B Shifting Tool is used to open (jarring down) or close (jarring
up) the WXD Circulating Sleeve.
All premium threads available.
2 Material: 4140, L80, 80K Yield / Optional 13% Chrome
3 The WXD has a larger flow port area (4.201) than the standard WXO or
WXA.
22.116
Communication Ports
Area 4.201 sq. in.
3
4 ITEM PART NAME No. PART No.
REQ.
The Top Sub of a WXA Connects to the tubing string. It contains a WX Style Locking Profile
and Polish Bore. It provides three indents which position the closing sleeve and/or inclined
shoulder which causes the WB Shifting Tool to release after the Inner Sleeve reaches the up
position. The lower end of the Top Sub is threaded to fit the Middle Sub and is sealed by the Top
Subs O-ring.
The Middle Sub screws onto both the Top and Bottom Sub. It provides flow ports for
communication and provides for the positioning and sealing of the packing.
The Packing Sets consist of three separate groups. The Upper Packing is made up of two sets
off vee packing secured between two female steel adapters and separated by a male adapter or O-
ring. The Middle Set consists of a middle O-ring which is secured between two female steel
adapters and is held in place by split ring segments. The Bottom Set consists of two sets of vee
packing secured between two female steel adapters and separated by a male adapter and O-ring.
The Inner Sleeve fits inside the Middle and the Top and Bottom Subs. It has a collet latch for
positioning, an equalizing port, and flow ports for communication. The Shifting Key recesses are
inside either end of the Inner Sleeve, allowing the shifting tool to latch into and move the Inner
Sleeve either up or down.
The Bottom Sub screws onto the Middle Sub and a bottom O-ring seals this joint. The WXA
Bottom Sub contains a bottom polish bore as well as an inclined shoulder to release the WB
Shifting Tool after shifting the Inner Sleeve. The lower end of the sub screws into the tubing string.
The WA Sleeve does not have a locking profile or polished seal bores. Other than that it is the
same as the WXA Sleeve.
WXA Circulating Sleeve
The Wireline Solutions Model WXA Circulating Sleeve is a down hole device, normally screwed into
the production tubing, that allows communication between the tubing and the casing.
The WXA Sleeve has replaceable upper and lower seals, which are easy and inexpensive to
replace. They can be of various elastomeric or non-elastomeric types.
The upper sub has a selective WX landing nipple profile machined into it to serve as a receptacle
for other flow control devices such as blanking plugs and separation tools. The lower sub has a
polished seal bore.
The WXA Sleeve can be installed at any point in the tubing string. More than one can be installed
without any loss of function. The sleeve can be selectively opened and closed no matter what their
relative positions.
The Wireline Solutions Model WB Shifting Tool is used to shift the WXA Sleeve open and closed.
The sleeve is designed so that normal wireline activities will not open or close the sleeve
inadvertently. Upward jarring opens the sleeve and downward jarring closes it.
APPLICATIONS
Displacing kill or completion fluid.
Allowing multiple zones to produce up one tubing string.
Selective testing of individual zones.
Selective stimulation of individual zones.
Circulating the well.
Gas lifting the well
Landing a blanking plug in the profile in the upper sub to shut in the well, test the
tubing, or test the sleeve itself.
Circulating inhibitors or methanol.
WXA / WA Circulating Sleeve
Shifting Procedure
TO CLOSE:
Using the correct B Shifting Tool or alternate manufacturers equivalent, place the tool on the
bottom of your wireline work string with the engaging (shifting) keys looking down. Go into hole to
proper depth of sleeve. Your Shifting Tool should engage the bottom of the Inner Sleeve at the
internal shifting shoulder.
Jar down and continue jarring until the Inner Sleeve is shifted into the closed position. At this
time the Shifting Tool should release and fall through the Sleeve.
To check Sleeve to see if it is fully closed, pull back up into Sleeve and try to engage Inner
Sleeve. If you cannot engage Inner Sleeve, it is fully closed or shear pin is sheared on Shifting
Tool. Come out of hole and check Shifting Tool. If pin is not sheared, then you can assume Sleeve
is shifted. Flowing either the tubing or casing should affect both sides if Sleeve is closed.
TO OPEN:
Place Shifting Tool on bottom of wireline work string with shifting keys looking up. Go into hole
to a point where you are sure you have gone through Sleeve. Slowly pick back up through Sleeve.
Your Shifting Tool should engage the top of the Inner Sleeve at the internal shifting shoulder.
Jar up. The Inner Sleeve should move into the equalizing position. After equalizing, continue
jarring up until the Inner Sleeve is in the full open position. At this time the Shifting Tool should
release and move up hole easily when pulled.
To check Sleeve, drop back down into Sleeve and try to engage Inner Sleeve. If you cannot
engage, assume Sleeve is opened and come out of hole. Check shear pin on Shifting Tool. If
shear pin is not sheared, then you can assume sleeve is shifted. Flowing either the tubing or
casing should not affect the other side if Sleeve is opened.
WXA / WA Circulating Sleeve
Working Instructions and Assembly
Use grease or pipe dope on all threaded connections and on all O-rings and Vee seals.
After a WXA / WA sleeve has been pulled from the hole, it is recommended you change the
Vee Packing and O-rings and also check packing area before running it back. The redress
procedure is as follows:
(1) Place Top Sub of Sleeve in vice and secure. Place stand under Sleeve for support. Tap with
hammer at area where Bottom Sub screws onto Middle Housing. Place wrench on Bottom
Sub and break top connection. Using uniform torque, unscrew Bottom Sub from Middle
Housing.
(2) Now place wrench on Middle Housing and break connection. Unscrew Middle Housing from
Bottom Sub. Shift Inner Sleeve out of Top Sub. Packing should remain in Middle Housing
when unscrewed and pulled off Inner Sleeve.
(3) Remove Vee Packing, Steel Rings, and O-rings from sleeve. Clean all parts, check for flow
cuts, check packing area and caliper area, check all threads taking special care of small
threads on top and bottom subs, and check O.D. of Inner Sleeve and Shifting Shoulder on
Inner Sleeve.
(4) After all parts are cleaned and inspected, place the Top Sub back into vice and secure.
Grease liberally. Shift Inner Sleeve into the first indent of Top Sub. Grease outside of Inner
Sleeve. Assemble Vee Packing, Steel Rings, and O-rings as detailed in the Assembly
Section. Slide Packing Assembly onto Inner Sleeve.
(5) Grease outside of Packing Assembly and inside the Middle Housing. There is a groove cut
inside the Middle Housing on one end. Face this end of Middle Housing toward you. One at
a time, place a Female Adapter Ring, then an O-ring, and another Female Ring in the Middle
Housing, pushing them down until they lay bottom out just below groove. Place Split
Segments in the Middle Housing as shown in the Assembly Section. Back up with another
Female Ring.
(6) Take Middle Housing, still having the end you worked on facing you, and make up on Top
Sub. The Inner Sleeve should remain out of the Middle Housing far enough that you can now
place remaining Vee Packing and Rings onto it. Next, take the Bottom Sub and make up onto
Middle.
(7) After Sleeve is completely made up and torqued, it should be shifted and pressure tested
before being run in the hole.
1.87 WXA Circulating Sleeve
w/ 2 3/8 EUE Pin X Pin
The WXA Circulating Sleeve provides a convenient way to establish
or shut off communication between the tubing and the annulus. Any
Number of these sleeves may be run in a tubing string, and any or all of
3.063
them may be opened or closed in one run by standard wireline methods.
4.000
DESIGN FEATURES
Features a nipple profile and a packing bore
1 above and below the communication ports.
4.645
3
19.191
8
ITEM PART NAME No. PART No.
REQ.
3
-- WXA Circulating Sleeve -- 001902187260100
2
1 Top Sub 1 001902187261600
2 Middle Sub 1 001702237001100
5
**3 O-Ring 2 #229
4 Inner Sleeve 1 001702237001200
3.848
DESIGN FEATURES
Features a nipple profile and a packing bore
1 above and below the communication ports.
4.709
3
22.116
8
ITEM PART NAME No. PART No.
REQ.
3
-- WXA Circulating Sleeve -- 001902231440100
2
1 Top Sub 1 001902231441000
2 Middle Sub 1 001702287001100
5
**3 O-Ring 2 #233
4 Inner Sleeve 1 001702287001200
3.982
DESIGN FEATURES
Features a nipple profile and a packing bore
1 above and below the communication ports.
4.906
DESIGN FEATURES
Features a nipple profile and a packing bore
1 above and below the communication ports.
4.750
The Wireline Solutions Model WA Circulating Sleeve is a no-frills Sleeve. It is used to provide a
means of casing-tubing communication in low pressure wells.
The WA Sleeve has no internal landing nipple profile. The standard WA has EUE pin by pin
connections. These can be machined to match premium thread types if required.
The sealing mechanism used in the WA Sleeve is the same proven method as the Model WXA and
WXO Sleeves. This ensures full seal integrity after repeated shifting.
The Wireline Solutions Model WB Shifting Tool is used to shift the WA Sleeve open and closed.
The sleeve is designed so that normal wireline activities will not open or close the sleeve
inadvertently. Upward jarring opens the sleeve and downward jarring closes it.
The WA, though lacking a Nipple Seal Bore or profile, is similar to the WXA. It is assembled,
shifted, and redressed in the same manner as the WXA.
APPLICATIONS
Displacing kill or completion fluid.
Allowing multiple zones to produce up one tubing string.
Selective testing of individual zones.
Selective stimulation of individual zones.
Circulating the well.
Gas lifting the well
Circulating inhibitors or methanol.
2 3/8 EUE WA Circulating Sleeve
w/ 2 3/8 EUE Pin X Pin
The WA Circulating Sleeve provides a convenient way to establish
or shut off communication between the tubing and the annulus. Any
3.063
Number of these sleeves may be run in a tubing string, and any or all of
them may be opened or closed in one run by standard wireline methods.
DESIGN FEATURES
1 Ports can be closed without leaving any obstructions in the
tubing once the shifting operation is completed.
The Model B Shifting Tool is used to open (jarring up) or
close (jarring down) the WA Circulating Sleeve.
All premium threads available.
Material: 4140, L80, 80K Yield / Optional 13% Chrome
Communication Ports Area 1.804 sq. in.
Min I.D. (Top & Bottom Subs: 1.906) Inner Sleeve I.D. = 1.945
**Recommended Spare Parts
2 7/8 EUE WA Circulating Sleeve
w/ 2 7/8 EUE Pin X Pin
The WA Circulating Sleeve provides a convenient way to establish
or shut off communication between the tubing and the annulus. Any
3.668
Number of these sleeves may be run in a tubing string, and any or all of
them may be opened or closed in one run by standard wireline methods.
DESIGN FEATURES
1 Ports can be closed without leaving any obstructions in the
tubing once the shifting operation is completed.
The Model B Shifting Tool is used to open (jarring up) or
close (jarring down) the WA Circulating Sleeve.
All premium threads available.
Material: 4140, L80, 80K Yield / Optional 13% Chrome
Communication Ports Area 1.804 sq. in.
Min I.D. (Top & Bottom Subs: 2.359) Inner Sleeve I.D. = 2.400
**Recommended Spare Parts
WL Circulating Sleeve
The WL Circulating Sleeve provides a way to establish or shut off communication between the tubing and
the annulus. Any number of sleeves may be run in a tubing string and any or all of them may be opened or
closed with a Self Releasing WD-2 Shifting Tool.
The Top Sub connects to the tubing string. It contains a WF landing nipple profile and a seal
bore. Selective and NoGo flow control accessories can be utilized with this sleeve. The Top Sub
screws onto the Middle Sub / Closing Sleeve assembly. The sleeve is built in such a manner that it
cannot be assembled incorrectly. The Middle Housing has flow ports and the Closing Sleeve seals
off in housing above and below flow ports and is shifted up to the open position and down into the
closing position. The closing sleeve has two permanently bonded seals which eliminates the seals
blowing off during shifting or equalizing. The replaceable seals never enter in flow path. The
Bottom Sub screws onto bottom of Middle Housing. It contains a seal bore for flow control
accessories and the lower end of Bottom Sub screws onto tubing string. Both the Top and Bottom
subs seal off in Middle Housing with O-rings. The seal bores in the Top and Bottom subs are what
the WD-2 Shifting Tool locates in to insure proper location of the shifting dogs onto the closing
sleeve. When shifted opened or closed, the shifting tool automatically releases.
WL Circulating Sleeve
Shifting Procedure
The Model WD-2 Shifting Tool is used to provide a selective and controlled method of opening and
closing the Model WL Circulating Sleeve.
OPERATION:
Spring loaded shifting dogs are normally held in the closed position by the spring-loaded retractor.
If the retractor is moved away from the shifting dogs, they automatically open. In operation,
anytime the collet engages the bore of the sleeve and either slack-off weight (for opening
operation) or up strain (for closing operation) is applied, the retractor moves away from the shifting
dogs allowing them to engage the closing sleeve of the circulation sleeve. At this point, jarring up
will open the sleeve and jarring down (with shifting tool run in the inverted position) will close the
sleeve.
The tool is spaced so that upon completion the retractor is once again in position to close the
shifting dogs. When the shifting dogs collapse, the tool turns loose, thus automatically signaling
that the shifting operation is complete.
To verify that the closing sleeve has shifted, the opening or closing is repeated. If the shifting
dogs fail to engage the closing sleeve, the sleeve has been shifted completely. If desired, the
same procedure can be used to determine the position of any closing sleeve in the well.
If at any time the collet engages the bore of a sleeve, jarring action is applied in the same
direction of the tool is run (down for opening and up for closing). The shifting tool will pass through
the sleeve without disturbing the position of any closing sleeve, regardless of the position of the
closing sleeve at the time.
This feature can also be used to deliberately release the shifting dogs from a closing sleeve at
any time desired. Jarring to the reverse of the normal direction will release the shifting tool. For
extra safety, shear pins are installed in the event reverse jarring cannot be applied, or the closing
sleeve failed to move.
When opening a circulation sleeve in the presence of annulus differential, the resultant flow
caused the flow upward from the bore of the sleeve. This action prevents the tools from being
blown up hole when opening this sleeve.
WL Circulating Sleeve
Shifting Procedure
TO OPEN:
Check adjustment dimensions A. Attach to a standard wireline tool string and run into the well.
Reduce running speed as the shifting tool approaches the circulating sleeve and make contact with
the NoGo shoulder in the upper end of the sleeve very slowly. Gently set down the full weight of
the wireline tool to engage the dogs with the lower of the closing sleeve. Apply an upward pull on
the wireline to verify that the shifting dogs will automatically release when the closing sleeve is in
the full open position. Verify that the closing sleeve has opened by repeating the opening
operation.
TO CLOSE:
When being run to close a sleeve, the fishing neck and thread protector must be reversed and
the tool run in the inverted position (collet on lower end of tool and dogs facing down). Check
adjustment dimension A, attach to standard wireline tool string and run in well. Reduce running
speed as tool approaches circulating sleeve. Collet then contacts the upper seal bore and then
lower seal bore. When the collet contacts the bottom of the seal bore in the lower sub, take a
moderate pull on the wireline to engage the shifting dogs with the top of the closing sleeve. Jar
down to shift closing sleeve closed. The shifting dogs will automatically release when closing
sleeve and the pick up rapidly to drive the collet into lower seal bore. Jar up only to move the collet
completely through both bores.
AUTOMATIC LOCATION COLLET: Flags the operator when a sleeve is reached. It also indicates
when the tool passes through a sleeve or landing nipple.
SAFETY FEATURE: If the sleeve is opened in the presence of a differential pressure in favor of
the annulus, the release mechanism is held imperative by the flow and the pressure is sufficiently
balanced to allow safe removal.
Note: WL Sleeves can be shifted using a Halliburton B Shifting Tool with shear type keys.
WL Circulating Sleeve
Redress Procedure
1.000
DESIGN FEATURES
Features a nipple profile above and a packing
NoGo Base
5
Communication Ports
7.970
6
2 O-Ring 2 #141
Note: Length of sleeve is as shown, varying with thread and bore size
relationships.
2.25 WL Circulating Sleeve
w/ 2 7/8 EUE Box X Pin
The WL Circulating Sleeve is a downhole flow control device
3.420 mounted in the production tubing to provide communication between the
tubing and casing annulus. It is opened by shifting an inner sleeve either
1
up or down by standard wireline methods.
5.188
1.000
DESIGN FEATURES
Features a nipple profile above and a packing
NoGo Base
5
Communication Ports
8.281
6
2 O-Ring 2 #149
Note: Length of sleeve is as shown, varying with thread and bore size
relationships.
2.31 WL Circulating Sleeve
w/ 2 7/8 EUE Box X Pin
The WL Circulating Sleeve is a downhole flow control device
3.420 mounted in the production tubing to provide communication between the
tubing and casing annulus. It is opened by shifting an inner sleeve either
1
up or down by standard wireline methods.
5.188
1.000
DESIGN FEATURES
Features a nipple profile above and a packing
NoGo Base
5
Communication Ports
8.281
6
2 O-Ring 2 #149
Note: Length of sleeve is as shown, varying with thread and bore size
relationships.
2.75 WL Circulating Sleeve
w/ 3 1/2 EUE Box X Pin
1.000
DESIGN FEATURES
NoGo Base
Features a nipple profile above and a packing
6.780
5
Communication Ports
8.750
6
2 O-Ring 2 #237
Note: Length of sleeve is as shown, varying with thread and bore size
relationships.
2.81 WL Circulating Sleeve
w/ 3 1/2 EUE Box X Pin
1.000
DESIGN FEATURES
Features a nipple profile above and a packing
NoGo Base
5
Communication Ports
8.750
6
2 O-Ring 2 #237
Note: Length of sleeve is as shown, varying with thread and bore size
relationships.
3.81 WL Circulating Sleeve
w/ 4 1/2 EUE Box X Pin
1.000
DESIGN FEATURES
Features a nipple profile above and a packing
NoGo Base
5
Communication Ports
13.156
6 2 O-Ring 1 #245
6 O-Ring 1 #246
Note: Length of sleeve is as shown, varying with thread and bore size
relationships.
Hydro Trip Pressure Subs
&
Wireline Re-Entry Guides
2 3/8 Model WE Hydro Trip Pressure Sub
w/ 2 3/8 EUE Box X Pin
The Model WE Hydro Trip Pressure Sub is a pressure actuated
device installed in tubing string below a hydrostatically actuated tool such
as a packer. It provides a method of applying pressure to activate and
A set the packer and then through continued pressure, activate the Hydro
Trip Sub.
The Packer is set by circulating a ball through the packer down to ball
seat in Hydro Trip Sub. After packer is set, a continued increase in
pressure is applied to shear the shear screws in the shear ring, allowing
the ball seat collet to move down into the collet relief area and allowing
the ball to pass down the Hydro Trip Sub through the tubing, leaving a
B 1
D full open Sub with no restrictions to production.
2
3 MATERIAL SELECTION:
4140 / P110 4140 / L80
110,000 Yield 82,000 Yield
4 Standard Service Resist Corrosion in
Sour Gas Environments
5
6 ITEM PART NAME No. PART No.
E REQ.
7
8 -- 2 3/8 WE Hydro Trip Sub -- 00152237260100
1 Top Sub 1 00152237261001
9
2 Drop Ball 1 1-3/4 O.D.
3 Ball Seat 1 001552237004900
F
4 Set Screw 1 10-31 x 3/16
5 O-Ring 1 #229
C 6 Spacer 1 001552237004700
7 ** Shear Screw (Brass) 8 -20 x 5/16
8 Shear Ring 1 00152237004800
9 Bottom Sub 1 001552237261600
** Shear Value for each Brass Screw = 375# +/- 15%
Ball Seat I.D.
SIZE A B C *D *E *E
Before Shift After Shift
* Dimensions are for Subs with threads shown. Dimensions will vary when Subs with different threads are used.
2 7/8 Model WE Hydro Trip Pressure Sub
w/ 2 7/8 EUE Box X Pin
The Model WE Hydro Trip Pressure Sub is a pressure actuated
device installed in tubing string below a hydrostatically actuated tool such
as a packer. It provides a method of applying pressure to activate and
A set the packer and then through continued pressure, activate the Hydro
Trip Sub.
The Packer is set by circulating a ball through the packer down to ball
seat in Hydro Trip Sub. After packer is set, a continued increase in
pressure is applied to shear the shear screws in the shear ring, allowing
the ball seat collet to move down into the collet relief area and allowing
the ball to pass down the Hydro Trip Sub through the tubing, leaving a
B 1
D full open Sub with no restrictions to production.
2
3 MATERIAL SELECTION:
4140 / P110 4140 / L80
110,000 Yield 82,000 Yield
4 Standard Service Resist Corrosion in
Sour Gas Environments
5
6 ITEM PART NAME No. PART No.
E REQ.
7
8 -- 2 7/8 WE Hydro Trip Sub -- 001552287440100
1 Top Sub 1 001552287441001
9
2 Drop Ball 1 2-1/8 O.D.
3 Ball Seat 1 001552287004900
F
4 Set Screw 1 -20 x
5 O-Ring 1 #232
C 6 Spacer 1 001552287004700
7 ** Shear Screw (Brass) 8 5/16-18 x 5/16
8 Shear Ring 1 001552287004800
9 Bottom Sub 1 001552287441600
** Shear Value for each Brass Screw = 445# +/- 15%
Ball Seat I.D.
SIZE A B C *D *E *E
Before Shift After Shift
* Dimensions are for Subs with threads shown. Dimensions will vary when Subs with different threads are used.
3 1/2 Model WE Hydro Trip Pressure Sub
w/ 3 1/2 EUE Box X Pin
The Model WE Hydro Trip Pressure Sub is a pressure actuated
device installed in tubing string below a hydrostatically actuated tool such
as a packer. It provides a method of applying pressure to activate and
A set the packer and then through continued pressure, activate the Hydro
Trip Sub.
The Packer is set by circulating a ball through the packer down to ball
seat in Hydro Trip Sub. After packer is set, a continued increase in
pressure is applied to shear the shear screws in the shear ring, allowing
the ball seat collet to move down into the collet relief area and allowing
the ball to pass down the Hydro Trip Sub through the tubing, leaving a
B 1
D full open Sub with no restrictions to production.
2
3 MATERIAL SELECTION:
4140 / P110 4140 / L80
110,000 Yield 82,000 Yield
4 Standard Service Resist Corrosion in
Sour Gas Environments
5
6 ITEM PART NAME No. PART No.
E REQ.
7
8 -- 3 1/2 WE Hydro Trip Sub -- 001552350620100
1 Top Sub 1 001552350621001
9
2 Drop Ball 1 2-1/2 O.D.
3 Ball Seat 1 001552350004900
F
4 Set Screw 1 -20 x
5 O-Ring 1 #239
C 6 Spacer 1 001552350004700
7 ** Shear Screw (Brass) 8 5/16-18 x 5/16
8 Shear Ring 1 001552350004800
9 Bottom Sub 1 001552350621600
** Shear Value for each Brass Screw = 290# +/- 15%
Ball Seat I.D.
SIZE A B C *D *E *E
Before Shift After Shift
* Dimensions are for Subs with threads shown. Dimensions will vary when Subs with different threads are used.
Model WE Hydro Trip Pressure Sub
Sizes 2 3/8 / 2 7/8 / 3 1/2
The Model WE Hydro Trip Pressure Sub is a pressure actuated device installed in tubing string
below a hydrostatically actuated tool such as a packer. It provides a method of applying pressure
to activate and set the packer and then through continued pressure, activate the Hydro Trip Sub.
Packer is set by circulating a ball through packer down to ball seat in the Hydro Trip Sub. After
packer is set, a continued increase in pressure is applied to shear the shear screws in the shear
ring, allowing the ball seat collet to move down into the collet relief area and allowing the ball to
pass down the Hydro Trip Sub through the tubing, leaving a full open Sub with no restrictions to
production.
REDRESS PROCEDURE
After a Hydro Trip Sub has been pulled from well, it is manufactured such that it
can be redressed and utilized again.
(Ball Seat Type Plug) Prevents fluid flow in one direction (downward)
while allowing fluid flow in the opposite
direction (upward).
May be used to test any tubing string, including production strings or to
activate hydrostatic packer systems.
After tubing has been tested or the packer activated, additional pressure
1 is then applied, shearing out the expendable
6.500
aluminum plug.
Aids wireline tools that have passed out the bottom of the tubing to re-
enter without hanging up.
Dependable, Simple, Quick.
2 All premium threads available.
3
MATERIAL SELECTION:
4140 / L80
4
82,000 Yield
Resist Corrosion in
Sour Gas Environments
2 O-Ring 1 #332
(Ball Seat Type Plug) Prevents fluid flow in one direction (downward)
while allowing fluid flow in the opposite
direction (upward).
May be used to test any tubing string, including production strings or to
activate hydrostatic packer systems.
1
After tubing has been tested or the packer activated, additional pressure
is then applied, shearing out the expendable
7.000
aluminum plug.
Aids wireline tools that have passed out the bottom of the tubing to re-
enter without hanging up.
2 Dependable, Simple, Quick.
All premium threads available.
3
4 MATERIAL SELECTION:
4140 / L80
82,000 Yield
Resist Corrosion in
Sour Gas Environments
2 O-Ring 1 #334
(Ball Seat Type Plug) Prevents fluid flow in one direction (downward)
while allowing fluid flow in the opposite
direction (upward).
May be used to test any tubing string, including production strings or to
activate hydrostatic packer systems.
1
After tubing has been tested or the packer activated, additional pressure
is then applied, shearing out the expendable
5.757
aluminum plug.
Aids wireline tools that have passed out the bottom of the tubing to re-
enter without hanging up.
2 Dependable, Simple, Quick.
All premium threads available.
3
4 MATERIAL SELECTION:
4140 / L80
82,000 Yield
Resist Corrosion in
Sour Gas Environments
2 O-Ring 1 #238
4
tubing without releasing or disturbing the packer.
5
* Standard Left Hand Release * Automatic Jay Up * Bonded
Seals * All Nipple Profiles Available for Stinger * Full Open or
Solid Stinger Available * 10K Rated * Wash over shoe on all
B Models *
MATERIAL SELECTION:
4140 / P110
110,000 Yield / Standard Service
Stinger
ITEM PART NAME No. REQ. PART No.
5
* Standard Left Hand Release * Automatic Jay Up * Bonded
Seals * All Nipple Profiles Available for Stinger * Full Open or
Solid Stinger Available * 10K Rated * Wash over shoe on all
B Models *
MATERIAL SELECTION:
4140 / P110
110,000 Yield / Standard Service
Stinger
ITEM PART NAME No. REQ. PART No.
4
tubing without releasing or disturbing the packer.
5
* Standard Left Hand Release * Automatic Jay Up * Bonded
Seals * All Nipple Profiles Available for Stinger * Full Open or
Solid Stinger Available * 10K Rated * Wash over shoe on all
B Models *
MATERIAL SELECTION:
4140 / P110
110,000 Yield / Standard Service
Stinger
ITEM PART NAME No. REQ. PART No.
1 MATERIAL SELECTION:
9% Chrome 4140 / L80
B
80,000 yield 80,000 Yield
2 WX Lock Mandrel 1
SIZE A B C D
2
ITEM PART NAME No. REQ.
3 1 Fishing Neck 1
4
B 2 Expander Sleeve 1
4 Spring 2
5
5 Key 2
6 Packing Mandrel 1
3
SIZE A B C D
The type WX Locking Mandrels are selective set lock mandrels designed to be landed down
hole in a selected WX Landing Nipple profile. The WX Lock is available with various sub
surface plug assemblies and flow control accessories. The WX Lock is designed for standard
weight tubing and service pressures. The Lock is made Selective by use of the WX-Line Running
Tool. They may be installed in any selected WX profile anywhere in the tubing string.
OPERATION
The selective locating system is designed into the WX-Line Running Tool using a set of Locating
Dogs on exterior of running tool. After the WX Lock is made up on the WX-Line Running Tool it is
lowered into well to selected WX Nipple. As the packing section of the lock is passed through the
landing nipple, the restriction is noticed by wireline operator. After selected nipple is located, the
tool string should be lowered through the nipple and stopped. The tool string should then be raised
slowly until tool stops, indicating locking dogs of running tool are on the lower end of Nipple. An
upward strain on the tool string will trip the locating dogs on the running tool and the lock mandrel
keys move into the locating position. With the lock mandrel keys now in the control position, raise
tool string 3 to 6 feet above the nipple and lower back into nipple until the mandrel keys reach
nipple profile. As the mandrel reaches the profile, the key springs move the keys into the profile
and stop the tool string. Jar downward at this time and shear the upper pin in running tool and
allow Expander Sleeve of lock mandrel to move down and be driven behind the mandrel keys.
When the Expander Sleeve is driven behind the mandrel keys, serrations retain the sleeve in the
locked position. Placing an upward strain on the tool string will determine the lock is locked in
place. If the mandrel cannot be pulled, jar upward and shear the shear pin on the lower end of
running tool allowing the tool string to come out of hole. If lock mandrel returns to surface with
running tool, it has not been properly set.
PULLING
The type GR (Shear Up) and GS (Shear Down) Running / Pulling Tool is used to retrieve a WX
Lock Mandrel. The GR or GS Pulling Tool is lowered down to lock and dogs of the pulling tool
engage the internal fishing neck of the lock. After engagement, upward jarring on the pulling tool
picks up the Expander Sleeve moving it from behind the mandrel keys and allows the keys to
retract. At this time, lock mandrel should be able to be retrieved. NOTE: Measures must be taken
that whatever plug device or flow control accessories that have been run in conjunction with WX
Lock have been equalized before attempting to pull.
WX Lock Mandrel
Sizes 1.875 / 2.313 / 2.750 / 2.813
ASSEMBLY
A. Install Keys (5) with Springs into Key Retainer Sleeve (3).
B. Insert Expander Mandrel (2) into Key Retainer Sleeve driving Expander Mandrel behind
locking keys.
C. Install Packing Mandrel (6) into lower end of Expander Mandrel until able to screw Packing
Mandrel into Key Retainer Sleeve.
D. Put Fishing Neck (1) into vice and screw Expander Mandrel into Fishing Neck, tighten.
E. Put Key Retainer Sleeve into vice and tighten Packing Mandrel onto Key Retainer Sleeve.
F. Install Female Rings, Male Center Ring and Vee Packing onto Packing Mandrel.
DISASSEMBLY
A. Place Locking Mandrel in vice by Key Retainer Sleeve. Remove Female End Rings, Male
Center Ring and Vee Packing.
B. Loosen and unscrew Packing Mandrel from Key Retainer Sleeve.
C. Place Fishing Neck in vice and pull Key Retainer Sleeve outward, exposing the Expander
Mandrel. Loosen and unscrew Expander Mandrel from Fishing Neck.
D. Remove from vice.
E. Drive Expander Mandrel out of Key Retainer Sleeve, thus enabling Keys and Springs to fall
free from Key Retainer Sleeve.
F. Clean all parts, inspect, grease and reassemble.
WPXN Plug
Sizes 1.875 / 2.313 / 2.750 / 2.813
(non-selective)
B
MATERIAL SELECTION:
9% Chrome 4140 / L80
80,000 Yield 82,000 Yield
2
ITEM PART NAME No. REQ.
SIZE A B C D
1
Material: 4140, L80
9% Chrome
2
2 Expander Sleeve 1
5 Key 2
3
6 Packing Mandrel 1
6
7 Packing Unit Assembly 1
SIZE A B C D
ASSEMBLY
A. Install Keys (5) with Springs into Key Retainer Sleeve (3).
B. Insert Expander Mandrel (2) into Key Retainer Sleeve driving Expander Mandrel behind
locking keys.
C. Install Packing Mandrel (6) into lower end of Expander Mandrel until able to screw Packing
Mandrel into Key Retainer Sleeve.
D. Put Fishing Neck (1) into vice and screw Expander Mandrel into Fishing Neck, tighten.
E. Put Key Retainer Sleeve into vice and tighten Packing Mandrel onto Key Retainer Sleeve.
F. Install Female Rings, Male Center Ring and Vee Packing onto Packing Mandrel.
DISASSEMBLY
A. Place Locking Mandrel in vice by Key Retainer Sleeve. Remove Female End Rings, Male
Center Ring and Vee Packing.
B. Loosen and unscrew Packing Mandrel from Key Retainer Sleeve.
C. Place Fishing Neck in vice and pull Key Retainer Sleeve outward, exposing the Expander
Mandrel. Loosen and unscrew Expander Mandrel from Fishing Neck.
D. Remove from vice.
E. Drive Expander Mandrel out of Key Retainer Sleeve, thus enabling Keys and Springs to fall
free from Key Retainer Sleeve.
F. Clean all parts, inspect, grease and reassemble.
Equalizing Prong and Valve Assembly
Type WPX / WPXN
Sizes 1.875 / 2.313 / 2.750 / 2.813
MATERIAL SELECTION:
4140 / L80 9C1M / 9 Chrome 1 Moly
80,000 Yield 80,000 Yield
1 Resist Corrosion High Resistance to Corrosion
Sour Gas Environments in Sour Gas Environments
3 Packing Unit 1
4 Nose 1
Thread
Connection
2
DATA AND CRITICAL DIMENSIONS
3
NoGo Base
7
Bypass Blanking Plugs with Removal Mandel
Models WFWG / WRZG
The Wireline Solutions WFWG and WRZG Bypass Blanking Plugs with Removable Mandrels
are positive blank-off services designed to seal off pressure from above and below. The Model
WFWG Blanking Plugs are equipped for Top NoGo landing in Model WF Non-Porting Seating
Nipples, and upper bore of Model WL Circulating Sleeves. The Model WRZG Blanking Plugs
are equipped for Bottom NoGo landing in Model WR Non-Porting Seating Nipples. The plugs are
compatible with normal wireline equipment and procedures.
OPERATION:
While running in the hole, the Removable Mandrel is in the down position (bypass port open) to
allow fluid bypass during setting procedure. When the plug is set in the nipple, locked in the
locking groove, and the lower shear pins have sheared, the mandrel is pulled up via the upper
pressures from above and below. Upward motion positions the groove in the mandrel under the
lock ring segments and prevents the mandrel from being moved down. The mandrel is kept from
moving up by the shear pins.
WFWG WRZG
Bypass Blanking Plugs with Removal Mandel
Models WFWG / WRZG
Equalizing and Pulling Instructions
NOTE #3:
A different fishing neck is used to run Models WFWG and WRZG tools with locks trailing or
collapsed.
Bypass Blanking Plugs with Removal Mandel
Models WFWG / WRZG
Running and Setting Instructions
Models WFWG and WRZG can be run with locks trailing or retracted.
NOTE:
This method (Selective with Up-Facing Locks Trailing) is not recommended to land in the
upper bore of a Model WL Circulating Sleeve due to possibly shifting the Sleeve. Also, it
is not recommended to land in a nipple with a short tubing joint immediately below it.
WFWG By-Pass Blanking Plug
(Top NoGo / Non-Flowing Lock)
Sizes 1.78 / 1.81 / 1.87
NoGo This Plug allows fluid to by-pass through the side ports when running
A
in the well. Once the plug is locked in a WF type profile, pressure can
be held in either direction. After well has been repaired or tested, Plug
can be equalized and pulled with standard wireline tools.
C
1
To Run: C-1 Running Tool
To Release: B Probe
D 1
2 MATERIAL SELECTION
4140 / L80 9C1M / 9 Chrome 1 Moly
E 82,000 Yield 80,000 Yield
Resist Corrosion in High Resistance to Corrosion
3 Sour Gas Environments in Sour Gas Environments
NoGo Base
4
F
ITEM PART NAME No. REQ.
5
1 Fishing Neck 1
6 2 W-2 Lock Sub Assembly 1
7 3 Washer 1
G
4 O-Ring / #014 1
8
9 5 Lock Ring Segments 2
By Pass Port 6 Stop Ring 1
10 7 Packing Unit Assembly 1
H
11
8 Brass Shear Pin 2
12
9 Retainer Ring 1
10
10 O-Ring / #011 2
13 11 Mandrel 1
14 12 Bottom Sub 1
13 O-Ring / #110 1
B
14 Plug 1
SIZE NoGo A B C D E F G H I
1.78 1.802
1.81 1.865 1.375 1.703 1.438 2.500 1.531 3.469 1.875 4.787 Brass Locking
Pin O.D. .125
1.87 1.905
WFWG By-Pass Blanking Plug
(Top NoGo / Non-Flowing Lock)
Sizes 2.25 / 2.31
NoGo This Plug allows fluid to by-pass through the side ports when running
A in the well. Once the plug is locked in a WF type profile, pressure can
be held in either direction. After well has been repaired or tested, Plug
can be equalized and pulled with standard wireline tools.
C
1 To Run: C-1 Running Tool
To Release: B Probe
D 1
MATERIAL SELECTION
2
4140 / L80 9C1M / 9 Chrome 1 Moly
E 82,000 Yield 80,000 Yield
Resist Corrosion in High Resistance to Corrosion
3 Sour Gas Environments in Sour Gas Environments
NoGo Base
4
F ITEM PART NAME No. REQ.
5 1 Fishing Neck 1
12 11 Bottom Sub 1
12 O-Ring / #115 1
13
13 Plug 1
B
SIZE NoGo A B C D E F G H I
2.25 2.302
1.750 2.156 1.156 2.250 1.640 3.797 1.875 5.348 Brass Locking
2.31 2.365 Pin O.D. .125
WFWG By-Pass Blanking Plug
(Top NoGo / Non-Flowing Lock)
Sizes 2.75 / 2.81
NoGo This Plug allows fluid to by-pass through the side ports when running
A in the well. Once the plug is locked in a WF type profile, pressure can
be held in either direction. After well has been repaired or tested, Plug
can be equalized and pulled with standard wireline tools.
C
1 To Run: C-1 Running Tool
To Release: B Probe
D 1
MATERIAL SELECTION
2
4140 / L80 9C1M / 9 Chrome 1 Moly
E 82,000 Yield 80,000 Yield
Resist Corrosion in High Resistance to Corrosion
3 Sour Gas Environments in Sour Gas Environments
4
F
1 Fishing Neck 1
5
2 W-2 Lock Sub Assembly 1
6 3 Washer 1
7 4 O-Ring / #018 1
G
5 Lock Ring Segments 2
8
By-Pass 6 Stop Ring 1
Port 7 Packing Unit Assembly 1
9
8 Brass Shear Pin 2
H
10
9 O-Ring / #113 2
11
10 Mandrel 1
9
11 Bottom Sub 1
12
12 O-Ring / #115 1
13 13 Plug 1
SIZE NoGo A B C D E F G H I
2.75 2.802
2.313 2.656 1.188 2.250 1.688 4.313 1.875 5.374 Brass Locking
2.81 2.865 Pin O.D. .125
WRZG By-Pass Blanking Plug
(Bottom NoGo / Non-Flowing Lock)
Sizes 1.78 / 1.81 / 1.87
This Plug allows fluid to by-pass through the side ports when running
A in the well. Once the plug is locked in a WR type profile, pressure can
be held in either direction. After well has been repaired or tested, Plug
can be equalized and pulled with standard wireline tools.
C
1 To Run: C-1 Running Tool
To Release: B Probe
D 1
MATERIAL SELECTION
2
4140 / L80 9C1M / 9 Chrome 1 Moly
82,000 Yield 80,000 Yield
Resist Corrosion in High Resistance to Corrosion
3 Sour Gas Environments in Sour Gas Environments
E
4
ITEM PART NAME No. REQ.
5 1 Fishing Neck 1
13 11 Mandrel 1
14 12 Bottom Sub 1
13 O-Ring / #110 1
B
14 Plug 1
SIZE NoGo A B C D E F G H
1.78 1.771
1.81 1.802 1.375 1.703 1.438 2.500 5.000 2.156 4.506 Brass Locking
Pin O.D. .125
1.87 1.865
WRZG By-Pass Blanking Plug
(Bottom NoGo / Non-Flowing Lock)
Sizes 2.25 / 2.31
This Plug allows fluid to by-pass through the side ports when running
A in the well. Once the plug is locked in a WR type profile, pressure can
be held in either direction. After well has been repaired or tested, Plug
can be equalized and pulled with standard wireline tools.
C
1 To Run: C-1 Running Tool
To Release: B Probe
D 1
MATERIAL SELECTION
2
4140 / L80 9C1M / 9 Chrome 1 Moly
82,000 Yield 80,000 Yield
Resist Corrosion in High Resistance to Corrosion
3 Sour Gas Environments in Sour Gas Environments
E
4
ITEM PART NAME No. REQ.
5 1 Fishing Neck 1
SIZE NoGo A B C D E F G H
2.25 2.240
1.750 2.156 1.156 2.250 5.440 2.156 5.062 Brass Locking
2.31 2.302 Pin O.D. .125
WRZG By-Pass Blanking Plug
(Bottom NoGo / Non-Flowing Lock)
Sizes 2.75 / 2.81
This Plug allows fluid to by-pass through the side ports when running
A in the well. Once the plug is locked in a WR type profile, pressure can
be held in either direction. After well has been repaired or tested, Plug
can be equalized and pulled with standard wireline tools.
C
1 To Run: C-1 Running Tool
To Release: B Probe
D 1
MATERIAL SELECTION
2
4140 / L80 9C1M / 9 Chrome 1 Moly
82,000 Yield 80,000 Yield
Resist Corrosion in High Resistance to Corrosion
3 Sour Gas Environments in Sour Gas Environments
E
4
ITEM PART NAME No. REQ.
5 1 Fishing Neck 1
SIZE NoGo A B C D E F G H
2.75 2.740
2.313 2.656 1.188 2.250 6.000 2.156 5.093 Brass Locking
2.81 2.802 Pin O.D. .125
Equalizing Check Valves
&
Instrument Hangers
WRB-2 Equalizing Check Valve
(Bottom NoGo)
Sizes 1.78 / 1.81 / 1.87
Equalizing Check Valves are sometimes called Standing Valves
A because they prevent fluid flow in one direction (downward) while
allowing full fluid flow in the opposite direction (upward). The WRB-2
B
seats on the bottom NoGo shoulder of a WR type profile which
prevents downward movement. It is not locked into the profile, and has a
built-in method of allowing equalizing before pulling.
C 1
To Run: C-1 Running Tool
To Release: SB or JDC Pulling Tool
2 MATERIAL SELECTION
4140 / L80 9C1M / 9 Chrome 1 Moly
3
82,000 Yield 80,000 Yield
4 Resist Corrosion in High Resistance to Corrosion
D Sour Gas Environments in Sour Gas Environments
5
6 ITEM PART NAME No. REQ.
7
1 Fishing Neck 1
4 2 Stainless Steel Ball 1
8 3 O-Ring #127 1
9 4 O-Ring / #124 2
5 Ball Seat 1
10
6 By-Pass Mandrel 1
E 11 7 Equalizing Sleeve 1
8 Brass Shear Screw 2
12 9 O-Ring #218 1
10 Packing Mandrel 1
11 Packing Unit Assembly 1
F 12 Retaining Nut 1
NoGo
SIZE NoGo A B C D E F
1.78 1.771
1.81 1.802 1.375 .438 3.430 6.660 5.590 1.062
1.87 1.865
WRB-2 Equalizing Check Valve
(Bottom NoGo)
Sizes 2.25 / 2.31
Equalizing Check Valves are sometimes called Standing Valves
A because they prevent fluid flow in one direction (downward) while
allowing full fluid flow in the opposite direction (upward). The WRB-2
B
seats on the bottom NoGo shoulder of a WR type profile which
prevents downward movement. It is not locked into the profile, and has a
built-in method of allowing equalizing before pulling.
C 1
To Run: C-1 Running Tool
To Release: SB or JDC Pulling Tool
2 MATERIAL SELECTION
4140 / L80 9C1M / 9 Chrome 1 Moly
3
82,000 Yield 80,000 Yield
4 Resist Corrosion in High Resistance to Corrosion
D Sour Gas Environments in Sour Gas Environments
5
6 ITEM PART NAME No. REQ.
7
1 Fishing Neck 1
4 2 Stainless Steel Ball 1
8 3 O-Ring #133 1
9 4 O-Ring / #128 2
5 Ball Seat 1
10
6 By-Pass Mandrel 1
E 11 7 Equalizing Sleeve 1
8 Brass Shear Screw 2
12 9 O-Ring #222 1
10 Packing Mandrel 1
11 Packing Unit Assembly 1
F 12 Retaining Nut 1
NoGo
SIZE NoGo A B C D E F
2.25 2.240
1.750 .438 3.310 8.310 5.750 1.250
2.31 2.302
WRB-2 Equalizing Check Valve
(Bottom NoGo)
Sizes 2.75 / 2.81
Equalizing Check Valves are sometimes called Standing Valves
A because they prevent fluid flow in one direction (downward) while
allowing full fluid flow in the opposite direction (upward). The WRB-2
B
seats on the bottom NoGo shoulder of a WR type profile which
prevents downward movement. It is not locked into the profile, and has a
built-in method of allowing equalizing before pulling.
C 1
To Run: C-1 Running Tool
To Release: SB or JDC Pulling Tool
2 MATERIAL SELECTION
4140 / L80 9C1M / 9 Chrome 1 Moly
3
82,000 Yield 80,000 Yield
4 Resist Corrosion in High Resistance to Corrosion
D Sour Gas Environments in Sour Gas Environments
5
6
ITEM PART NAME No. REQ.
7
1 Fishing Neck 1
4
2 Stainless Steel Ball 1
8
3 O-Ring #141 1
9
4 O-Ring / #135 2
10 5 Ball Seat 1
6 By-Pass Mandrel 1
E 11
7 Equalizing Sleeve 1
8 Brass Shear Screw 2
12 9 O-Ring #225 1
10 Packing Mandrel 1
11 Packing Unit Assembly 1
F
12 Retaining Nut 1
NoGo
SIZE NoGo A B C D E F
2.75 2.740
2.313 .750 3.310 8.320 7.180 1.563
2.81 2.802
WFB-2 Equalizing Check Valve
(Top NoGo)
Sizes 1.78 / 1.81 / 1.87
Equalizing Check Valves are sometimes called Standing Valves
A because they prevent fluid flow in one direction (downward) while
allowing full fluid flow in the opposite direction (upward). The WFB-2
B
seats on the top NoGo shoulder of a WF type profile which prevents
downward movement. It is not locked into the profile, and has a built-in
method of allowing equalizing before pulling.
C 1
To Run: C-1 Running Tool
To Release: SB or JDC Pulling Tool
MATERIAL SELECTION
2
4140 / L80 9C1M / 9 Chrome 1 Moly
3
82,000 Yield 80,000 Yield
4 Resist Corrosion in High Resistance to Corrosion
D Sour Gas Environments in Sour Gas Environments
5
ITEM PART NAME No. REQ.
6
7 1 Fishing Neck 1
10 Packing Mandrel 1
SIZE NoGo A B C D E F G
1.78 1.802
1.375 .438 3.430 6.660 5.590 1.062 1.771
1.81 1.865
1.87 1.905
WFB-2 Equalizing Check Valve
(Top NoGo)
Sizes 2.25 / 2.31
Equalizing Check Valves are sometimes called Standing Valves
A because they prevent fluid flow in one direction (downward) while
allowing full fluid flow in the opposite direction (upward). The WFB-2
B
seats on the top NoGo shoulder of a WF type profile which prevents
downward movement. It is not locked into the profile, and has a built-in
method of allowing equalizing before pulling.
C 1
To Run: C-1 Running Tool
To Release: SB or JDC Pulling Tool
2 MATERIAL SELECTION
4140 / L80 9C1M / 9 Chrome 1 Moly
3
82,000 Yield 80,000 Yield
4 Resist Corrosion in High Resistance to Corrosion
D Sour Gas Environments in Sour Gas Environments
5
6
ITEM PART NAME No. REQ.
7
1 Fishing Neck 1
4
2 Stainless Steel Ball 1
8
3 O-Ring #133 1
9
4 O-Ring / #128 2
10
5 Ball Seat 1
NoGo
6 By-Pass Mandrel 1
E 11
7 Equalizing Sleeve 1
8 Brass Shear Screw 2
12 9 O-Ring #222 1
10 Packing Mandrel 1
11 Packing Unit Assembly 1
F
12 Retaining Nut 1
G
SIZE NoGo A B C D E F G
2.25 2.302
1.750 .438 3.310 8.310 5.750 1.250 2.240
2.31 2.365
WFB-2 Equalizing Check Valve
(Top NoGo)
Sizes 2.75 / 2.81
Equalizing Check Valves are sometimes called Standing Valves
A because they prevent fluid flow in one direction (downward) while
allowing full fluid flow in the opposite direction (upward). The WFB-2
B
seats on the top NoGo shoulder of a WF type profile which prevents
downward movement. It is not locked into the profile, and has a built-in
method of allowing equalizing before pulling.
C 1
To Run: C-1 Running Tool
To Release: SB or JDC Pulling Tool
2 MATERIAL SELECTION
4140 / L80 9C1M / 9 Chrome 1 Moly
3
82,000 Yield 80,000 Yield
4 Resist Corrosion in High Resistance to Corrosion
D Sour Gas Environments in Sour Gas Environments
5
6
ITEM PART NAME No. REQ.
7
1 Fishing Neck 1
4
2 Stainless Steel Ball 1
8
3 O-Ring #141 1
9
4 O-Ring / #135 2
10
5 Ball Seat 1
NoGo
6 By-Pass Mandrel 1
E 11
7 Equalizing Sleeve 1
8 Brass Shear Screw 4
12 9 O-Ring #225 1
10 Packing Mandrel 1
11 Packing Unit Assembly 1
F
12 Retaining Nut 1
G
SIZE NoGo A B C D E F G
2.75 2.802
2.313 .750 3.310 8.320 7.180 1.563 2.740
2.81 2.865
WFWB Instrument Hanger
(Top NoGo)
Sizes 1.78 - 2.81
This Instrument Hanger is used to land and lock geophysical
NoGo instruments in WF type profiles to allow recording of reservoir data.
FEATURES / BENEFITS
It allows the wells Safety System to remain
in full operation during the survey.
It allows removal of wireline from a corrosive
environment to prevent damage of wireline.
Several wells may be surveyed with one wireline.
A
To Run: C-1 Running Tool
To Release: B Probe
To Pull: SB Pulling Tool
NoGo
Base MATERIAL SELECTION
W-2 Lock 4140 / L80 9C1M / 9 Chrome 1 Moly
Sub-Assy. 82,000 Yield 80,000 Yield
Resist Corrosion in High Resistance to Corrosion
Bottom Sour Gas Environments in Sour Gas Environments
Adapter
B
SIZE NoGo A B C D
C
1.78 1.802
1.87 1.905
2.75 2.802
8.250 2.219 1.938
2.81 2.865
WRZB Instrument Hanger
(Bottom NoGo)
Sizes 1.78 - 2.81
This Instrument Hanger is used to land and lock geophysical
instruments in WR type profiles to allow recording of reservoir data.
FEATURES / BENEFITS
It allows the wells Safety System to remain
in full operation during the survey.
It allows removal of wireline from a corrosive
environment to prevent damage of wireline.
Several wells may be surveyed with one wireline.
A
To Run: C-1 Running Tool
To Release: B Probe
To Pull: SB Pulling Tool
MATERIAL SELECTION
4140 / L80 9C1M / 9 Chrome 1 Moly
Z-2 Lock 82,000 Yield 80,000 Yield
Sub Assy.
Resist Corrosion in High Resistance to Corrosion
Sour Gas Environments in Sour Gas Environments
Bottom
Adapter
B
NoGo Base
SIZE NoGo A B C D
C
D 1.78 1.771
1.87 1.865
NoGo
2.25 2.240 .750 O.D.
7.690 2.171 2.656 16 UNF
2.31 2.302
Box Thread
Box Thread
Tubing Crossovers
Box X Pin
Box Thread
Pin Thread
Shear Out Safety Joints
Shear Out Safety Joints
Sizes: 2 3/8 & 2 7/8
DESCRIPTION:
The Wireline Solutions Shear Out Safety Joint allows
straight pull release of the tubing string at a controlled
shear value where retrieval problems are anticipated.
The Safety Joint is placed between a packer and a
sand screen to provide means of releasing and
retrieving the production string.
SHEAR VALUE:
The Shear Out Safety Joint can be run using from 2 to
12 brass shear pins, each valued at 5,000 lbs., allowing
the shear value of the tool to be varied from 10,000 to
60,000 lbs. The tool is shipped with all 12 pins in place,
unless specified otherwise. Remove the necessary
number of shear pins required to obtain the desired
releasing pull. The remaining pins should be as evenly
spaced as possible.
In determining the desired shear-out force, two factors
should be considered; pressure in favor of the tubing
acts on a sealed-off area tending to shear the joint
loose. The total weight of all tubing and equipment
suspended below the joint is carried by the shear pins.
The shear-out force should be sufficiently high to
overcome both of these forces.
Wireline Socket (rope socket) provides a means for connecting the wireline to
the tool string.
Wireline Stem (sinker bar) is used as weight to overcome well pressure,
fluids, and friction to sink the tools into the well bore. Stem is also used to
transmit force either upward or downward to set or retrieve downhole
controls.
Wireline Knuckle Joint is used for flexibility through the tool string.
Wireline Jars (spang type link jars) used for obtaining a hammering effect by
upward or downward movement.
Wireline running tool, pulling tool, or other service tool required to perform
services desired.
Tool strings are available in various sizes that are designed by nominal
dimensions rather than tubing sizes.
1 5/8 11 NC 1.000
1 1/4 15/16 10 UN 1 3/16
1 1/2 15/16 10 UN 1 3/8
1 3/4 1 1/16 10 UN 1 3/4
2 1/8 1 1/16 10 UN 1 3/4
The Sand Bailer consists of a piston and check valve encased in an outer
cylinder, At the lower end of the bailer there is a ball check valve or flapper-
type valve, which allows sand and debris to enter the bailer tube. By lightly
stroking up and down with the wireline tool string the bailer acts to suck
sand and debris into the cylinder through the ball or flapper bottom and
trapping the substances inside the tube.
Various bottom shoe sizes and configurations, as well as extension tubes for
the Sand Bailer are available on request.
1 OD 1105-100-00 1110-100-00
1 1/4 OD 1105-125-00 1110-125-00
1 1/2 OD 1105-150-00 1110-150-00
1 5/8 OD 1105-162-00 1110-162-00
1 3/4 OD 1105-175-00 1110-175-00
2 OD 1105-200-00 1110-200-00
2 1/8 OD 1105-212-00 1110-212-00
2 1/4 OD 1105-225-00 1110-225-00
3 OD 1105-300-00 1110-300-00
Different skirt sizes can be fitted for various tubing and tool
sizes. Brass shear discs are available in different thicknesses
for various well pressures.
1 1/4 OD 1140-125-00
1 1/2 OD 1140-150-00
1 5/8 OD 1140-162-00
2 OD 1140-200-00
2 1/2 OD 1140-250-00
3 OD 1140-300-00
Junk Basket
Bottom
Other Sizes Available Upon Request
Blind Box
The Blind Box is flat on the bottom and hardened to reduce damage.
The O.D. of the Blind Box should be matched in accordance with the
tubing in which it is to be used.
Assembly 1195-000-00
Teflon Centralizer
NOMINAL SIZE PART NUMBER
2 1190-200-00
2 1/2 1190-250-00
3 1190-300-00
Steel Centralizer
NOMINAL SIZE MAX O.D. PART NUMBER
2 1.843 1185-184-00
3 2.700 1185-270-00
The Gauge Ring is a wireline service tool used to gauge the I.D. of
the tubing in which it is run. It should be run prior to running or pulling a
sub-surface device, thus assuring the operator that the tubing is
unobstructed down to the depth that he will be working.
Effective jarring impacts depends on the weight of the stem used, the
length of the strength of the jars, the size and depth of the tools, the
viscosity of the fluid in the tubing, and the well pressure acting upon the
cross sectional area of the wireline.
Knuckle Joint
THREAD CONNECTION FISHING NECK PART
SIZE PIN X BOX SIZE NUMBER
1 5/8 11 NC 1.000 2395-100-00
1 1/4 15/16 10 UN 1 3/16 2395-125-20
1 1/2 15/16 10 UN 1 3/8 2395-150-20
1 3/4 1 1/16 10 UN 1 3/4 2395-175-20
1 7/8 1 1/16 10 UN 1 3/4 2395-187-20
2 1/8 1 1/16 10 UN 1 3/4 2395-212-20
Knuckle Jar
THREAD CONNECTION FISHING NECK PART
SIZE PIN X BOX SIZE NUMBER
1 1/4 15/16 10 UN 1 3/16 2390-125-20
1 1/2 15/16 10 UN 1 3/8 2390-150-20
1 3/4 1 1/16 10 UN 1 3/4 2390-175-20
1 7/8 1 1/16 10 UN 1 3/4 2390-187-20
2 1/8 1 1/16 10 UN 1 3/4 2390-212-20
SPECIFICATIONS
WILL ENGAGE 1.062 1.375 1.812 2.313 3.125
FISHING NECK I.D.
TOP THREAD 15/16 - 10 15/16 - 10 15/16 - 10 1 1/16 - 10 1 1/16 - 10
CONNECTION
FISHING NECK O.D. 1.187 1.375 1.750 2.313 2.313
ON TOOL
BOTTOM THREAD 1/2 - 13 1/2 - 13 5/8 - 11 5/8 - 11 2 1/8 - 12
CONNECTION
Other Sizes Available Upon Request
GS Pulling Tool
The GS Pulling Tool is a wireline service tool designed
to retrieve flow control devices from well bore. The GS
Pulling Tool is designed to engage an internal type fishing
neck. The tool is available in a wide range of sizes, for
standard or H2S service.
The GS Pulling Tool is designed to be released from
the downhole device by downward jarring.
GR Shear Up Adapter
The GR Shear Up Adapter is a wireline pulling tool
device used to convert a Type GS Pulling Tool. The
shear pin on the GS Pulling Tool must be removed. The
complete assembly, now a Type GR Pulling Tool will
operate with a shear-up to release action instead of a
shear down.
The GR Adapter is available to suit all sizes of the
GS Pulling Tool.
NOMINAL SIZE PART NUMBER
1 1/2 2925-150-00
2 2925-150-00
2 1/2 2925-250-00
3 2925-300-00
JD Pulling Tool
1 1/4 2940-150-00
1 3/8 2940-137-00
2 2940-200-00 2945-200-00
3 2940-300-00 2945-300-00
4 2940-400-00 2945-400-00
To convert a JU Pulling Tool into a JD, change the top sub and install a core cap to the core.
R Pulling Tool
The R Pulling Tool is a wireline service tool designed to remove retrievable
subsurface devices with external fishing necks from a well. This tool utilizes a
set of three dogs to engage the fishing neck.
The R Pulling Tool is available in a wide range of sizes, with three reaches in
each sizes. All tools can be supplied for standard or H2S service.
The R Pulling Tool is designed to be released from the downhole device by
upward jarring.
By changing only the core of the R Pulling Tool, it is possible to obtain a RB,
RS, or RJ Pulling Tool
DATA and DIMENSIONS
TO ENGAGE
SIZE TYPE FISHING NECK REACH MAX O.D. TOP THREAD
O.D. CONNECTION
1 1/2 RB 1.187 1.265 1.430 15/16-10
1 1/2 RS 1.187 1.797 1.430 15/16-10
1 1/2 RJ 1.187 2.547 1.430 15/16-10
2 RB 1.375 1.219 1.770 15/16-10
2 RS 1.375 1.984 1.770 15/16-10
2 RJ 1.375 2.547 1.770 15/16-10
2 1/2 RB 1.750 1.203 2.180 15/16-10
2 1/2 RS 1.750 1.984 2.180 15/16-10
2 1/2 RJ 1.750 2.547 2.180 15/16-10
3 RB 2.312 1.297 2.740 1 1/16-10
3 RS 2.312 2.156 2.740 1 1/16-10
3 RJ 2.312 2.609 2.740 1 1/16-10
4 RB 3.125 1.406 3.718 1 1/16-10
4 RS 3.125 2.156 3.718 1 1/16-10
S Pulling Tool
NOMINAL SIZE SB ASSEMBLY SS ASSEMBLY SJ ASSEMBLY
S Pulling Tool
The S Pulling Tool is a wireline service tool designed to remove retrievable
subsurface devices with external fishing necks from a well. This tool utilizes a
set of three dogs to engage the fishing neck.
The S Pulling Tool is available in a wide range of sizes, with three reaches in
each sizes. All tools can be supplied for standard or H2S service.
By changing only the core of the S Pulling Tool, it is possible to obtain a types
SB, SS, or SJ Pulling Tools.
The S Pulling Tool is designed to be released from the downhole device by
downward jarring. Therefore the S Pulling Tool is particularly suited for use as
a pulling tool when extensive jarring is required.
Because of the downward shear release of the S Pulling Tool, it is particularly
useful as a running tool for collar stops, pack-off anchor stops, and other
subsurface devices landed against a positive no-go.
DATA and DIMENSIONS
TO ENGAGE TOP THREAD
SIZE TYPE FISHING NECK O.D. REACH MAX O.D. CONNECTION
1 1/2 SB 1.187 1.297 1.437 15/16-10
The Single Strand Rope Socket is used to securely attach .082 or .092
wireline to the tool string. The rope socket consists of a body, spring, spring
support thimble, and disc.
The Brass Wedge Rope Socket is used to securely attach .108 or larger
wireline to the tool string. It utilizes a brass wedge to keep the wireline attached
within the rope socket instead of a spring, thimble and spool as used in
conventional rope sockets.
0.092 3105-125-00
1 1/4 0.108 3110-125-00 1.187 15/16 10 UN
0.125 3115-125-00
0.187 3120-125-00
0.092 3105-150-00
1 1/2 0.108 3110-150-00 1.375 15/16 10 UN
0.125 3115-150-00
0.187 3120-150-00
0.092 3105-175-00
1 3/4 0.108 3110-175-00 1.750 1 1/16 10 UN
0.125 3115-175-00
0.187 3120-175-00
0.092 3105-187-00
1 7/8 0.108 3110-187-00 1.750 1 1/16 10 UN
0.125 3115-187-00
0.187 3120-187-00
Multi Strand Rope Socket
The Slip Type Rope Socket is designed for use with small multi-strand lines
through 5/16 diameter. The Slip Type rope Socket consists of a body, sub,
slips, and set screw featuring easy assembly. The slips are designed to cause
the line to break under severe loading at specific percentage of the full line
tensile strength in the event that the wireline tool string becomes stuck. The
operator is assured that the line will break at the Rope Socket, rather than up-
hole, allowing retrieval of the line.
The Type C-1 Running Tool is a wireline service tool used to install
locking mandrels with external fishing necks in the appropriate landing
nipple. The C-1 Running Tool is run using a thread protector, which is
the same O.D. as the body of the tool to set selective type locking mandrels.
A seal bore locating ring may be used instead to set top no-go type locking
mandrels.
NOMINAL SIZE 2 2 3 4
PART NUMBER 3135-200-00 3135-250-00 3135-300-00 3135-400-00
X-Line Running Tool
The Type B Shifting Tool is used to position the closing sleeve or sliding
sleeve to the open or closed position.
Wireline Stems, often referred to as weight bars provide the mass required
in jarring operations and the mass required to enable the tool string to fall
against the tubing differential pressure and friction at the wireline stuffing
box.
Tubing Swedge
The Tubing Swedge is used to swedge out mashed areas and other
obstructions in the tubing string to insure the free passage of the subsurface
controls. It is also used to open orange-peel type bull plugs on the lower
Tubing End end of the tubing.
Locator The Tubing Swegde is tapered on both ends. The upper end is threaded
with a pin connection and a fishing neck. Since the largest portions of the
swedge is approximately equal to the drift diameter of the tubing, a fluid
course is provided through the central bore and lateral ports.
Tubing Swedge
SIZE THREAD FISHING NECK PART
MAX O.D. CONNECTION SIZE NUMBER
Wireline Grab
SIZE PART # PART #
MAX O.D. 2 PRONG 4 PRONG
1.500 3620-150-00 3625-150-00
1.750 3620-175-00 3625-175-00
2.250 3620-225-00 3625-225-00
2.500 3620-250-00 3625-250-00
2.625 3620-262-00 3625-262-00
2.700 3620-270-00 3625-270-00
Center Spear
The Center Spear is a wireline service tool used to
fish out broken wireline from the well bore. If the ball
of wire is too compacted making it impossible to use a
conventional wireline grab, this tool is used to pierce
the ball of wire, loosen the wire, and retrieve it from the
well bore.
Tubing Swedge
DESCRIPTION PART NUMBER
ASSEMBLY 1180-200-00