Beruflich Dokumente
Kultur Dokumente
PIF AI3
FUn PI (Parameter regulator) (Feedback Signal (Input Sensor
Port) Connect Port)
29.9
CtL Fr1 (Reference channel) AIU1 (Internal Pressure
Set Point in meters)
2C
I_O tCC(Type of Sensor) (Two Wire Sensor
control)
FrH(Frequency reference)
LCr(Current)
Note: 1. Two Wire 0-10bar 4-20mA pressure sensor is connected to AI13 pin
2. Internal 24V DC power supply is used as the power input for sensoor
3. A jumper is used between +24VDC and LI1 (Can use it as a selector switch for Pump ON/Off)
4. You can set/change the Values By rotating the Jog
Drawn:- Nayantha
Supply and Installation of 1 Number of
11kW VSD to Alankulam Pump House
Date :- 02.02.2017