Beruflich Dokumente
Kultur Dokumente
Integrated Circuit
Current Mode Pulse Width Modulator (PWM)
Control Circuit
Description:
The NTE7096 and NTE7097 are integrated circuits in 8Lead DIP type packages that incorporate a
new precision temperaturecontrolled oscillator with an internally trimmed discharge current to mini-
mize variations in frequency. A precision dutycycle clamp eliminates any need for an external oscil-
lator when at, or near, a 50% dutycycle condition. Dutycycles greater than 50% are also possible.
Special logic ensures that Vref is stabilized before the output stage is enabled. Ionimplant resistors
provide tighter control of undervoltage lockout.
Other features include low startup current, pulsebycurrent limiting, and highcurrent totem pole
output for driving capacitive loads, such as the gate of a power MOSFET. The output is low in the
off state, consistent with Nchannel devices.
Features:
D Optimized for OffLine Control
D Internally Trimmed Temperature Compensated Oscillator
D Maximum DutyCycle Clamp
D Vref Stabilized before Output Stage is Enabled
D Low StartUp Current
D Pulseby Pulse Current Limiting
D Improved U/V Lockout
D Double Pulse Suppression
D 1% Trimmed Bandgap Reference
D High Current Totem Pole Output
COMP 1 8 VREF
VFB 2 7 VCC
ISENSE 3 6 OUTPUT
RTCT 4 5 GND
8 5
.260 (6.6)
1 4
.155
(3.93)
.300 (7.62)