Beruflich Dokumente
Kultur Dokumente
DR
D. Bischoff
12OCT2006 TE Connectivity
CHK Amprestrae 12-14
D-64625 Bensheim
J. Granzow
GERMANY
D Remarks on page 6
S. Gilch 03MAY2016 16 OCT2006
and 7 added
C Adding application APP NO REV LOC
temp. at ice water S. Gilch 01OCT2015
Ch. Eberwein
shock test (3.5.21)
26JAN2009 108-94020 D AI
B1 - D. Bischoff 22APR2013
B - J. Granzow 10FEB2012
Titel
Heavy Duty Sealed Connector Series
REVISION PAGE
LTR APP DATE Hoch beanspruchbare Steckverbinder-Serie,
RECORD 1 OF 24 gedichtet
CONTENTS INHALT
1. SCOPE 1. ANWENDUNGSBEREICH
1.1 Content 1.1 Inhalt
1.2 Qualification 1.2 Qualifikation
3. REQUIREMENTS 3. ANFORDERUNGEN
3.1 Design and Construction 3.1 Entwurf und Konstruktion
3.2 Materials 3.2 Werkstoffe
3.3 Ratings 3.3 Technische Daten
3.4 Performance and Test Description 3.4 Leistungsmerkmale und Testbeschrei-
bung
3.5 Requirements and Procedures 3.5 Anforderungen und Prfungen
2 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
1 SCOPE 1 ANWENDUNGSBEREICH
This specification covers the performance, tests and Diese Spezifikation beschreibt die Eigenschaften,
quality requirements of electrical heavy-duty con- Tests und Qualittsanforderungen fr die elektri-
nectors, 2 to 18 positions for several AMP MCP schen, hoch beanspruchbaren Steckverbinder, 2 bis
contacts. These connectors may be mounted direct- 18polig, fr diverse AMP MCP Kontakte und Schie-
ly to the combustion engine or to the gear box and berverriegelung. Diese Steckverbindungen werden
by that exposed high thermal and mechanical z.B. direkt am Verbrennungsmotor bzw. Getriebe
stress. eingesetzt und sind dadurch besonders hohen
thermischen und dynamischen Beanspruchungen
ausgesetzt.
When tests are performed, the following specified Bei der Prfung der genannten Produkte sind die
specifications and standards shall be used. All in- nachfolgend aufgefhrten Richtlinien und Normen
spections shall be performed using the applicable zu verwenden. Alle Prfungen mssen nach den
inspection plan and product drawing. zugehrigen Prfplnen und Produktzeichnungen
durchgefhrt werden.
The following documents are part of this specifica- Die nachfolgend genannten Unterlagen, sofern da-
tion to the extent specified herein. In the events of rauf verwiesen wird, sind Teil dieser Spezifikation.
conflict between the requirements of this specifica- Im Falle des Widerspruches zwischen dieser Spezi-
tion and the product drawing or of conflict between fikation und der Produktzeichnung oder des Wider-
the requirements of this specification and the refe- spruches zwischen dieser Spezifikation und den
renced documents, this specification shall take aufgefhrten Unterlagen hat diese Spezifikation
precedence. Vorrang.
3 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
1654282-2 Heavy Duty Sealed Connector Series 1654282-2 Hoch beanspruchbare Steckverbinder-
(for the Commercial Vehicles Industry) Serie, gedichtet (fr die Nutzfahrzeug-
branche)
4 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
5 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
3. REQUIREMENTS 3. ANFORDERUNGEN
The product shall be of the design, con- Das Produkt muss in seiner Ausfhrung
struction and physical dimensions of the und seinen physikalischen Abmessungen
applicable product drawing. der Produktzeichnung entsprechen.
Details are shown in the drawings. Angaben hierzu sind den Zeichnungs-
unterlagen entnehmen.
3) With contacts AMP MCP 1.5k and Tab 3) Bei Kontakten AMP MCP 1.5k und
contact 1.6x0.6mm in connection with Flachsteckern 1.6x0.6mm in Verbindung
1.5mm FLR we recommend as follows: mit 1.5mm FLR gilt folgende Empfeh-
lung:
3a) Standard application AMP MCP 1.5k: 3a) Standard Anwendung AMP MCP 1.5k:
At temperature up to 120, Bei Einsatztemperatur bis 120C
single wire seal PN 0-2287497-1 Einzelleiterdichtung PN 0-2287497-1
recommended, empfohlen
6 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
3b) At contact TAB 1,6x0,6mm and cable 3b) Bei Flachstecker 1.6x0.6mm und Kabel
FLR 1,5mm in connection with 1.5mm FLR in Verbindung mit Einzel-
single wire seal PN 2287497-1 leiterdichtung PN 2287497-1,
maximum temperature 120C allowed betrgt die Maximaltemperatur 120C
4) For all other wire size cross sections the 4) Fr alle anderen Leitungsquerschnitte
specifications of contact systems are gelten die Spezifikationen der Kontakt-
valid as well as the information from par- systeme und die Angaben der jeweiligen
ticular customer drawing Kundenzeichnung
IP67 IP67
IP69K (with cover only / for tab housings IP69K (nur mit Abdeckkappe / bei Flach-
with flange only by observing the mounting steckergehusen mit Flansch nur unter
instructions; for details see application Beachtung der Verbauvorschrift; Einzel-
specification 114-18756) heiten dazu siehe Verarbeitungsspezi-
fikation 114-18756)
E Durability: E Steckhufigkeit:
Depends on the contact surface, the Abhngig von der Kontaktoberflche, dem
counterpart and the application. Gegenstecker und der Anwendung.
See specifications of contacts (see Typische Werte siehe Kontaktspezifi-
chapter 2.1 D of this specification) kationen (s. Abschnitt 2.1 D dieser
for typical values. Spezifikation).
7 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
The product is designed to meet the electri- Das Produkt erfllt die in Abschnitt 3.5
cal, mechanical and environmental perfor- aufgefhrten elektrischen, mechanischen
mance requirements specified in chapter und klimatischen Anforderungen. Soweit
3.5. All tests are performed at ambient envi- nicht anderes spezifiziert, sind alle Prfun-
ronmental conditions per IEC 60512 unless gen unter den in der DIN EN 60512 ge-
otherwise specified. nannten Umweltbedingungen durchgefhrt.
For groups C and E, some applications re- Fr die Gruppen C und E sind bestimmte
garding vibration depending on the used Einsatzbereiche bzgl. Vibration in Abhn-
connector type are not possible (see table gigkeit vom verwendeten Steckverbinder-
below / for details of the testing see chapter Typ nicht mglich (siehe untenstehende
3.5.10). Tabelle / Details zu den Tests siehe Kapitel
3.5.10).
8 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
OPTICAL INSPECTIONS
OPTISCHE PRFUNGEN
MECHANICAL INSPECTIONS
MECHANISCHE PRFUNGEN
Locking Unlocking
Group
Verriegeln Entriegeln
Gruppe
[N] [N]
A max. 50 15-30
B max. 55 15-30
C max. 75 20-45
D max. 80 25-60
9 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
10 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
3.5.6 The following force requirements Tested with aged parts at room
must be fulfilled for 10 s: temperature.
Static load resistance of the coupled - 250N (axial in unmating direction)
connection - 150N (acting in an angle of 90 Getestet mit gealterten Teilen bei
degrees to the connecting axis) Raumtemperatur.
Statische Belastbarkeit der
gekuppelten Steckverbindung Folgende Krfte mssen ber eine
Dauer von 10 s ertragen werden:
- 250N (axial in Lserichtung)
- 150N (90 zur Steckerachse)
3.5.7 Following force requirements about Tested with aged parts at room
a time of 10 sec. must be fulfilled temperature.
Static load resistance of the free - 350N (lying, stable positions)
connectors Getestet mit gealterten Teilen bei
Folgende Kraft muss ber eine Raumtemperatur.
Statische Belastbarkeit der freien Dauer von 10 s ertragen werden:
Steckverbinder - 350N (liegend, stabile Lagen)
11 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
12 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
Expansion test for sprung masses The max. permitted resistance Resonance search
(chassis applications) with silver after the test is 2,5x initial re- Frequency range 1-2000Hz
plated contacts. sistance. The initial permitted Swept sine peak acceleration 3g
resistance is 5mOhm. Logarithmic sweep
Erweiterter Test fr gefederte Mas- Sweep rate 1 octave/min.
sen (Anwendungen am Fahrgestell) Der max. erlaubte ber- Sinusoidal vibration
mit versilberten Kontakten gangswiderstand nach dem Sweep rate for sinusoidal vibration:
Test betrgt das 2,5fache vom logarithmic, 1 octave/min
Ausgangswert. Der Aus-
Test duration for swept sine vibration:
gangswert muss 5mOhm 6 h in each direction X, Y and Z
betragen.
Random vibration
Crest factor for random vibration:
3 (minimum)
13 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
Random vibration
Test duration for random vibration:
amax = 177m/s ,
94 h in each direction X, Y and Z
Frequency PSD
Hz (m/s2)s2
/ Hz
10 14
20 28
30 28
180 0.75
300 0.75
600 20
2000 20
r.m.s. acceleration
value 177m/s2
14 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
3.5.11 The function acc. to chapter 3.5.15 Acc. to ISO 16750-3, 4.2.2
has to be ensured after testing. (10 successive shocks in both
Mechanical shock directions each of the 3
Nach dem Test muss die Funktion
perpendicular axes -> 60 shocks
gem. Kapitel 3.5.15 gewhrleistet
Schockprfung with course acc. to figure 3.5.2)
sein.
Nach ISO 16750-3, 4.2.2
(10 aufeinanderfolgende
Schocks in beide Richtungen der
3 senkrecht zueinander stehen-
den Achsen -> 60 Schocks mit
Verlauf gem. Abb. 3.5.2)
15 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
ELECTRICAL INSPECTIONS
ELEKTRISCHE PRFUNGEN
3.5.14 Contact temperature rise < 40K Acc. to DIN EN 60512-5-1 (test 5a:
after 1h test duration. temperature rise) and -2 (test 5b:
Current carrying capacity current-carrying capacity [derating]).
For details see the product specifi-
Erhhung der Kontakttemperatur cations of the contact systems
Strombelastbarkeit
< 40K nach 1 Stunde Prfdauer. (chapter 2.1 D) and selected tests at
pages 19 et seq.
3.5.16 Value and nature of the test voltage: Acc. to ISO 16750-2 (4.11)
Ueff = 500V (AC) Temperature: 23+/-5C
Voltage proof (withstand voltage) Humidity: 45-55%
frequency: 50 or 60Hz
Duration: 60s
No flash over or breakdown
Spannungsfestigkeit
between adjacent contacts and Nach ISO 16750-2 (4.11)
outer contour of the housing Temperatur: 23+/-5C
permitted. Luftfeuchtigkeit: 45-55%
Prfdauer: 60s
Wert und Art der Prfspannung:
Ueff = 500V (AC)
Frequenz: 50 oder 60Hz
Kein Durch- oder berschlag
zwischen benachbarten Kontakten
und der Auenkontur zulssig.
3.5.17 Value and nature of the test Acc. to ISO 16750-2 (4.12)
Voltage: 500V direct voltage Temperature: 23+/-5C
Humidity: 4555%
Insulation resistance
Wert und Art der Prfspannung: Duration: 54-66s
500V Gleichspannung Nach ISO 16750-2 (4.12)
Isolationswiderstand
Temperatur: 23+/-5C
Riso > 107Ohm Luftfeuchtigkeit: 4555%
Prfdauer: 54-66s
16 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
ENVIRONMENTAL INSPECTIONS
UMWELTPRFUNGEN
17 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
(**)
Diesel-Fuel / Diesel-Kraftstoff:
Silicone seals swell and may cause
excessive mating/unmating forces.
The use of tab housings with flange
is not permitted.
Silikondichtungen quellen und
knnen hhere Steck-/Lsekrfte
verursachen. Der Einsatz von
Flachsteckergehusen mit Flansch
ist nicht zulssig.
18 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
3.5.23 No visible corrosion; light changes Not tested separately; see Product
of colour will be left out of Specifications of contact systems.
Humidity, Salt fog, Exhaust fumes, consideration.
Industrial atmosphere Mechanical and electrical features
ensured after testing. Nicht separat getestet; siehe
Luftfeuchtigkeit, Salznebel, Produktspezifikationen der
Keine Korrosionserscheinungen
Abgase, Industrieklima Kontaktsysteme.
sichtbar; leichte Verfrbungen
bleiben unbercksichtigt.
Mechanische und elektrische
Eigenschaften auch nach Tests
gewhrleistet.
3.5.25 It shall be not possible to mate two 1. Housings with different codings
connectors in any false position. are mated in mating direction.
Connector coding and polarization Electrical connection shall be 2. Housings with the same coding
prevented before coding or are turned 180 to each other.
Steckverbinder Kodierung und polarization is engaged.
Polarisierung A force of 200N is applied on the
housing in axial direction.
Testing speed: 25mm/min
Es darf nicht mglich sein, zwei
Stecker in eine falsche Position zu
stecken. Der elektrische Kontakt 1. Gehuse mit unterschiedlichen
ist zu verhindern, bevor die Kodierungen in Steckrichtung
Kodierung oder Polarisation in stecken.
Eingriff kommt. 2. Gehuse mit gleichen Kodie-
rungen um 180 gedreht ste-
cken.
19 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
Fig. / Abb. 3.5.3: Coupling, 4pos., tinned contacts / 4polige Kupplung mit verzinnten Kontakten
20 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
Fig. / Abb. 3.5.4: Coupling, 4pos., silver plated contacts / 4pol. Kupplung mit versilberten Kontakten
21 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
Fig. / Abb. 3.5.5: Coupling, 2pos., AMP MCP 6,3/4,8, with silver plated contacts /
2pol. AMP MCP 6,3/4,8 Kupplung mit versilberten Kontakten
22 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
Nr. Test TG1 TG2 TG3 TG4 TG5 TG6 TG7 TG8
3.5.1 Visual examination 1, 8 1, 4 1, 8 1, 3, 1, 3, 1, 3 1, 3, 1, 7
Sichtprfung 5 5 5
3.5.3 Operating force for the slide 4
Bettigungskraft fr den Schieber
3.5.4 Contact retention in housing 4a
3.5.5 Haltekraft der Kontakte im Gehuse
3.5.6 Static load resistance of the connection 4b
3.5.7 Stat. Belastbarkeit der Steckverbindung
3.5.8 Free fall 2
Freier Fall
3.5.9 Drop test 4
Fallprfung
3.5.10 Combined vibration and temperature cycling 5
Kombinierte Schwingungs- u. Temperaturprfung
3.5.11 Mechanical shock 6
Schockprfung
3.5.14 Current-carrying capability 3, 6
Strombelastbarkeit
3.5.15 Contact resistance 2, 4, 2, 5,
Durchgangswiderstand 7 7
3.5.16 Voltage proof (withstand voltage) 3, 6
Spannungsfestigkeit
3.5.17 Insulation resistance 2, 5
Isolationswiderstand
3.5.18 Pre-ageing (cold and dry heat) 3 2(*) 4 2 4
3.5.20 Voralterung (Klte und trockene Wrme)
3.5.21 Degree of protection 3
Schutzart
3.5.22 Resistance against operating substances 2
Bestndigkeit gegen Betriebsstoffe
3.5.25 Connector coding and polarization 2
Steckverbinder Kodierung und Polarisierung
23 of 24
PRODUCT SPECIFICATION
Produktspezifikation
Heavy Duty Sealed Connector Series
Hoch beanspruchbare Steckverbinder-Serie, gedichtet
108-94020
Rev. D
If changes significantly affecting form, fit or Falls signifikante, die vereinbarten Eigen-
function are made to the product or to the schaften berhrende nderungen der
manufacturing process, product assurance Form, Ausstattung oder Funktion des Pro-
shall coordinate requalification testing, con- duktes oder dessen Herstellungsverfah-
sisting of all or part of the original testing se- rens vorgenommen wurden, wird die zu-
quence as determined by development / stndige Entwicklungsabteilung einen Re-
product, quality and reliability engineering. qualifikationstest koordinieren.
Dieser besteht aus einem Teil oder den
gesamten ursprnglichen Prfgruppen, je
nach Festlegung durch die Entwicklungs-
und Qualittssicherungsabteilung.
Acceptance is based on verification that the Die Abnahme basiert auf dem Nachweis,
product meets the requirements of Paragraph da das Produkt den Anforderungen nach
3.5. Failures attributed to equipment, test Abschnitt 3.5 gengt. Abweichungen, die
setup or operator deficiencies shall not dis- auf Megerte, Meanordnungen oder
qualify the product. When failure occurs cor- Bedienungsmngel zurckzufhren sind,
rective actions shall be taken and samples drfen nicht zum Entzug der Qualifikation
resubmitted for qualification. Testing to con- fhren. Tritt eine Abweichung auf, mssen
firm corrective actions is required before re- korrigierende Manahmen ergriffen wer-
submittal. den und die Qualifikation ist erneut nach-
zuweisen. Vor dieser Requalifikation ist
durch entsprechende Prfungen der Er-
folg der Korrekturmanahmen zu bestti-
gen.
The applicable quality inspection plan will Die Konformittsprfung erfolgt nach dem
specify the sampling acceptable quality level zugehrigen Qualittsinspektionsplan, der
to be used. Dimensional and functional re- die annehmbare Qualittsgrenzlage nach
quirements shall be in accordance with the dem Stichprobenumfang festlegt. Mali-
applicable product drawing and this specifica- che und funktionelle Anforderungen ms-
tion. sen mit den Produktzeichnungen und die-
ser Spezifikation bereinstimmen.
24 of 24