Beruflich Dokumente
Kultur Dokumente
You can enter the default IP address to log in to S1700 web-managed switches using
the web system without performing any configurations.
2. Prerequisite
Use a PC to log in to the switch using Telnet.
3. Configuration Roadmap
1. Load the web system file on the switch.
2. Enable the HTTP service.
3. Configure a user name, password, and user level.
4. Open the web browser on the PC and log in to the switch.
//Open the web browser on the PC and enter https://IP address/ to log in to the switch.
2.1 2.2
6
? Default VLAN: 1-4094
MAC Address Limit: 1-1024
6
? Allow VLAN: 1-4094
2
3.1 3.2
3
Configure Interface ACL 6
5
Edit ACL rules
4
2
9
8 7
1 4
4.1
4.2
(Optional) 5.2 Do not power off the device during the upgrade.
3
2
4.1
4.2
5.1
5.2
3
2
? User name: @ cannot be in the first place and cannot contain \/:*?<>|%.
Password: must be a combination of digits, symbols, and uppercase or lowercase letters.
37 It cannot be blank and cannot contain
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential
single quotation marks (').
16 Configure a Switch Using the Web System
2. Configuration Example
PC1 is on the network segment 1.1.1.0/24 and PC3 is on the network
segment 1.1.3.0/24.
A user wants to configure basic settings in the web system so that
PC1 and PC3 can communicate with each other.
3. Configuration Roadmap
1. Create VLANs and add interfaces to the VLANs.
2. Create VLANIF interfaces and configure IP addresses for the VLANIF interfaces to implement communication
between switches.
3. Configure a default IP gateway on each PC.
4. Configure a default static route on the switch so that PCs on different network segments can communicate.
S1700-28FR-2T2P-AC
S1700-28GFR-4P-AC 192.168.1.253 admin/Admin@123
S1700-52FR-2T2P-AC
S1700-52GFR-4P-AC
S1720-20GFR-4TP admin/
S1720-28GFR-4TP 192.168.1.253 admin@huawei.com