Sie sind auf Seite 1von 36

System Information Message (SIB 1)

Time : 01:22:32.141
Vendor Header
UARFCN DL : 10712
Primary Scrambling Code : 406
cn-CommonGSM-MAP-NAS-SysInfo
CN Common GSM-MAP NAS System Information
Location Area Code (LAC) : 40101 (Hex 0x9CA5)
cn-DomainSysInfoList
CN-DomainSysInfoList :
[0 ] :
cn-DomainIdentity : cs-domain
cn-Type : gsm-MAP
gsm-MAP
CS Domain Specific System Information
T3212 timeout value : (10) 1.0 hours
Attach-Detach Allowed (ATT) : (1) MSs shall apply IMSI attach and detach procedure
cn-DRX-CycleLengthCoeff : 6
[1 ] :
cn-DomainIdentity : ps-domain
cn-Type : gsm-MAP
gsm-MAP
PS Domain Specific System Information
Routing area code (RAC) : 2 (Hex 0x02)
NMO : (1) Network mode of operation II
cn-DRX-CycleLengthCoeff : 6
ue-ConnTimersAndConstants
t-301 : ms100
n-301 : 0
t-302 : ms1000
n-302 : 2
t-305 : m5
t-308 : ms40
t-309 : 8
t-310 : ms40
n-310 : 0
t-311 : ms250
n-313 : s50
t-314 : s4
t-315 : s30
t-316 : s0
t-317 : infinity0
ue-IdleTimersAndConstants
t-300 : ms2000
n-300 : 3
t-312 : 2
n-312 : s1
System Information Message (SIB 2) System Information Message (SIB 3)

Time : 01:19:23.765 Time : 01:19:23.765


Vendor Header Vendor Header
UARFCN DL : 10712 UARFCN DL : 10712
Primary Scrambling Code : 367 Primary Scrambling Code : 367
ura-IdentityList sib4indicator : False
URA-IdentityList : cellIdentity
[0 ] : Value : 26291148 (191 2BCC hex)
URA-Identity value : 40101 (9CA5 hex) cellSelectReselectInfo
cellSelectQualityMeasure : cpich-Ec-N0
q-HYST-2-S : 2 dB
modeSpecificInfo : fdd
s-Intrasearch : 10 dB
s-Intersearch : 10 dB
rat-List
RAT-FDD-InfoList :
[0 ] :
rat-Identifier : gsm
s-SearchRAT : 2 dB
s-Limit-SearchRAT : 6 dB
q-QualMin : -17
q-RxlevMin : -115 dBm
q-Hyst-l-S : 10 dB
t-Reselection-S : 1
maxAllowedUL-TX-Power : 30
cellAccessRestriction
cellBarred
CellBarred : notBarred
cellReservedForOperatorUse : notReserved
cellReservationExtension : notReserved
accessClassBarredList
AccessClassBarredList :
[0 ] : notBarred
[1 ] : notBarred
[2 ] : notBarred
[3 ] : notBarred
[4 ] : notBarred
[5 ] : notBarred
[6 ] : notBarred
[7 ] : notBarred
[8 ] : notBarred
[9 ] : notBarred
[10] : notBarred
[11] : notBarred
[12] : notBarred
[13] : notBarred
[14] : notBarred
[15] : notBarred
System Information Message (SIB 5) System Information Message (SIB 7)

Time : 01:22:32.241 Time : 01:19:23.766


Vendor Header Vendor Header
UARFCN DL : 10712 UARFCN DL : 10712
Primary Scrambling Code : 406 Primary Scrambling Code : 367
sib6indicator : False modeSpecificInfo : fdd
pich-PowerOffset : -7 ul-Interference : -104
modeSpecificInfo : fdd prach-Information-SIB5-List
aich-PowerOffset : -7 DynamicPersistenceLevelList :
primaryCCPCH-Info [0 ] : 1
PrimaryCCPCH-Info : fdd expirationTimeFactor : 1
tx-DiversityIndicator : False
prach-SystemInformationList
PRACH-SystemInformationList :
[0 ] :
prach-RACH-Info
modeSpecificInfo : fdd
availableSignatures
AvailableSignatures-signature15 : 1
AvailableSignatures-signature14 : 1
AvailableSignatures-signature13 : 1
AvailableSignatures-signature12 : 1
AvailableSignatures-signature11 : 1
AvailableSignatures-signature10 : 1
AvailableSignatures-signature9 : 1
AvailableSignatures-signature8 : 1
AvailableSignatures-signature7 : 1
AvailableSignatures-signature6 : 1
AvailableSignatures-signature5 : 1
AvailableSignatures-signature4 : 1
AvailableSignatures-signature3 : 1
AvailableSignatures-signature2 : 1
AvailableSignatures-signature1 : 1
AvailableSignatures-signature0 : 1
availableSF : sfpr64
preambleScramblingCodeWordNumber : 0
puncturingLimit : pl1
availableSubChannelNumbers
AvailableSubChannelNumbers-subCh11 : 0
AvailableSubChannelNumbers-subCh10 : 0
AvailableSubChannelNumbers-subCh9 : 0
AvailableSubChannelNumbers-subCh8 : 0
AvailableSubChannelNumbers-subCh7 : 0
AvailableSubChannelNumbers-subCh6 : 0
AvailableSubChannelNumbers-subCh5 : 0
AvailableSubChannelNumbers-subCh4 : 1
AvailableSubChannelNumbers-subCh3 : 1
AvailableSubChannelNumbers-subCh2 : 1
AvailableSubChannelNumbers-subCh1 : 1
AvailableSubChannelNumbers-subCh0 : 1
transportChannelIdentity : 1
rach-TransportFormatSet
TransportFormatSet : commonTransChTFS
commonTransChTFS
tti : tti20
tti20
CommonDynamicTF-InfoList :
[0 ] :
rlc-Size : fdd
octetModeRLC-SizeInfoType2
OctetModeRLC-SizeInfoType2 : sizeType1
sizeType1 : 15
numberOfTbSizeList :
[0 ] :
NumberOfTransportBlocks : one
logicalChannelList
LogicalChannelList : configured
[1 ] :
rlc-Size : fdd
octetModeRLC-SizeInfoType2
OctetModeRLC-SizeInfoType2 : sizeType2
sizeType2 : 3
numberOfTbSizeList :
[0 ] :
NumberOfTransportBlocks : one
logicalChannelList
LogicalChannelList : configured
semistaticTF-Information
channelCodingType
ChannelCodingType : convolutional
convolutional : half
rateMatchingAttribute : 160
crc-Size : crc16
rach-TFCS
TFCS : normalTFCI-Signalling
normalTFCI-Signalling
ExplicitTFCS-Configuration : complete
complete
ctfcSize : ctfc2Bit
ctfc2Bit :
[0 ] :
ctfc2 : 0
powerOffsetInformation
gainFactorInformation
GainFactorInformation : signalledGainFactors
signalledGainFactors
modeSpecificInfo : fdd
gainFactorBetaC : 11
gainFactorBetaD : 15
powerOffsetPp-m : 2
[1 ] :
ctfc2 : 1
powerOffsetInformation
gainFactorInformation
GainFactorInformation : signalledGainFactors
signalledGainFactors
modeSpecificInfo : fdd
gainFactorBetaC : 11
gainFactorBetaD : 15
powerOffsetPp-m : 2
prach-Partitioning
PRACH-Partitioning : fdd
fdd :
[0 ] :
accessServiceClass-FDD
availableSignatureStartIndex : 0
availableSignatureEndIndex : 15
assignedSubChannelNumber-b3 : 1
assignedSubChannelNumber-b2 : 1
assignedSubChannelNumber-b1 : 1
assignedSubChannelNumber-b0 : 1
[1 ] :
accessServiceClass-FDD
availableSignatureStartIndex : 0
availableSignatureEndIndex : 15
assignedSubChannelNumber-b3 : 1
assignedSubChannelNumber-b2 : 1
assignedSubChannelNumber-b1 : 1
assignedSubChannelNumber-b0 : 1
[2 ] :
accessServiceClass-FDD
availableSignatureStartIndex : 0
availableSignatureEndIndex : 15
assignedSubChannelNumber-b3 : 1
assignedSubChannelNumber-b2 : 1
assignedSubChannelNumber-b1 : 1
assignedSubChannelNumber-b0 : 1
persistenceScalingFactorList
PersistenceScalingFactorList :
[0 ] : psf0-9
ac-To-ASC-MappingTable
AC-To-ASC-MappingTable :
[0 ] : 0
[1 ] : 0
[2 ] : 0
[3 ] : 0
[4 ] : 0
[5 ] : 0
[6 ] : 0
modeSpecificInfo : fdd
primaryCPICH-TX-Power : 36
constantValue : -21
prach-PowerOffset
powerRampStep : 2
preambleRetransMax : 20
rach-TransmissionParameters
mmax : 6
nb01Min : 3
nb01Max : 40
aich-Info
channelisationCode256 : 9
sttd-Indicator : False
aich-TransmissionTiming : e0
sCCPCH-SystemInformationList
SCCPCH-SystemInformationList :
[0 ] :
secondaryCCPCH-Info
modeSpecificInfo : fdd
dummy1 : mayBeUsed
sttd-Indicator : False
sf-AndCodeNumber
SF256-AndCodeNumber : sf128
sf128 : 1
pilotSymbolExistence : False
tfci-Existence : False
positionFixedOrFlexible : fixed
timingOffset : 10240
tfcs
TFCS : normalTFCI-Signalling
normalTFCI-Signalling
ExplicitTFCS-Configuration : complete
complete
ctfcSize : ctfc2Bit
ctfc2Bit :
[0 ] :
ctfc2 : 0
[1 ] :
ctfc2 : 1
fach-PCH-InformationList
FACH-PCH-InformationList :
[0 ] :
transportFormatSet
TransportFormatSet : commonTransChTFS
commonTransChTFS
tti : tti10
tti10
CommonDynamicTF-InfoList :
[0 ] :
rlc-Size : fdd
octetModeRLC-SizeInfoType2
OctetModeRLC-SizeInfoType2 : sizeType1
sizeType1 : 24
numberOfTbSizeList :
[0 ] :
NumberOfTransportBlocks : zero
[1 ] :
NumberOfTransportBlocks : one
logicalChannelList
LogicalChannelList : allSizes
semistaticTF-Information
channelCodingType
ChannelCodingType : convolutional
convolutional : half
rateMatchingAttribute : 230
crc-Size : crc16
transportChannelIdentity : 1
ctch-Indicator : False
pich-Info
PICH-Info : fdd
channelisationCode256 : 8
pi-CountPerFrame : e18
sttd-Indicator : False
[1 ] :
secondaryCCPCH-Info
modeSpecificInfo : fdd
dummy1 : mayBeUsed
sttd-Indicator : False
sf-AndCodeNumber
SF256-AndCodeNumber : sf64
sf64 : 1
pilotSymbolExistence : False
tfci-Existence : True
positionFixedOrFlexible : flexible
tfcs
TFCS : normalTFCI-Signalling
normalTFCI-Signalling
ExplicitTFCS-Configuration : complete
complete
ctfcSize : ctfc4Bit
ctfc4Bit :
[0 ] :
ctfc4 : 0
[1 ] :
ctfc4 : 1
[2 ] :
ctfc4 : 2
[3 ] :
ctfc4 : 3
[4 ] :
ctfc4 : 4
fach-PCH-InformationList
FACH-PCH-InformationList :
[0 ] :
transportFormatSet
TransportFormatSet : commonTransChTFS
commonTransChTFS
tti : tti10
tti10
CommonDynamicTF-InfoList :
[0 ] :
rlc-Size : fdd
octetModeRLC-SizeInfoType2
OctetModeRLC-SizeInfoType2 : sizeType1
sizeType1 : 15
numberOfTbSizeList :
[0 ] :
NumberOfTransportBlocks : zero
[1 ] :
NumberOfTransportBlocks : one
[2 ] :
NumberOfTransportBlocks : small
small : 2
logicalChannelList
LogicalChannelList : allSizes
semistaticTF-Information
channelCodingType
ChannelCodingType : convolutional
convolutional : half
rateMatchingAttribute : 220
crc-Size : crc16
transportChannelIdentity : 2
ctch-Indicator : False
[1 ] :
transportFormatSet
TransportFormatSet : commonTransChTFS
commonTransChTFS
tti : tti10
tti10
CommonDynamicTF-InfoList :
[0 ] :
rlc-Size : fdd
octetModeRLC-SizeInfoType2
OctetModeRLC-SizeInfoType2 : sizeType2
sizeType2 : 3
numberOfTbSizeList :
[0 ] :
NumberOfTransportBlocks : zero
[1 ] :
NumberOfTransportBlocks : one
logicalChannelList
LogicalChannelList : allSizes
semistaticTF-Information
channelCodingType
ChannelCodingType : turbo
rateMatchingAttribute : 130
crc-Size : crc16
transportChannelIdentity : 3
ctch-Indicator : False
sysInfoType5-v4b0ext
frequencyBandIndicator : fdd2100
sysInfoType5-v680ext
hsdpa-CellIndicator: hsdpa-CapableCell
sysInfoType5-v690ext
edch-CellIndicator: edch-CapableCell
System Information Message (SIB 11)

Time : 01:22:32.443
Vendor Header
UARFCN DL : 10712
Primary Scrambling Code : 406
sib12indicator : False
measurementControlSysInfo
use-of-HCS : hcs-not-used
cellSelectQualityMeasure : cpich-Ec-N0
intraFreqMeasurementSysInfo
intraFreqCellInfoSI-List
newIntraFreqCellList
NewIntraFreqCellSI-List-ECN0 :
[0 ] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 406
readSFN-Indicator : True
tx-DiversityIndicator : False
[1 ] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 307
readSFN-Indicator : True
tx-DiversityIndicator : False
[2 ] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 140
readSFN-Indicator : True
tx-DiversityIndicator : False
[3 ] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 208
readSFN-Indicator : True
tx-DiversityIndicator : False
[4 ] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 142
readSFN-Indicator : True
tx-DiversityIndicator : False
[5 ] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 356
readSFN-Indicator : True
tx-DiversityIndicator : False
[6 ] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 354
readSFN-Indicator : True
tx-DiversityIndicator : False
[7 ] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 154
readSFN-Indicator : True
tx-DiversityIndicator : False
[8 ] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 132
readSFN-Indicator : True
tx-DiversityIndicator : False
[9 ] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 390
readSFN-Indicator : True
tx-DiversityIndicator : False
[10] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 407
readSFN-Indicator : True
tx-DiversityIndicator : False
[11] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 405
readSFN-Indicator : True
tx-DiversityIndicator : False
[12] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 365
readSFN-Indicator : True
tx-DiversityIndicator : False
[13] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 364
readSFN-Indicator : True
tx-DiversityIndicator : False
[14] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 363
readSFN-Indicator : True
tx-DiversityIndicator : False
[15] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 40
readSFN-Indicator : True
tx-DiversityIndicator : False
[16] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 13
readSFN-Indicator : True
tx-DiversityIndicator : False
[17] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 12
readSFN-Indicator : True
tx-DiversityIndicator : False
[18] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 89
readSFN-Indicator : True
tx-DiversityIndicator : False
[19] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 88
readSFN-Indicator : True
tx-DiversityIndicator : False
[20] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 116
readSFN-Indicator : True
tx-DiversityIndicator : False
[21] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 115
readSFN-Indicator : True
tx-DiversityIndicator : False
[22] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 114
readSFN-Indicator : True
tx-DiversityIndicator : False
[23] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 61
readSFN-Indicator : True
tx-DiversityIndicator : False
[24] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 392
readSFN-Indicator : True
tx-DiversityIndicator : False
[25] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 391
readSFN-Indicator : True
tx-DiversityIndicator : False
[26] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 268
readSFN-Indicator : True
tx-DiversityIndicator : False
[27] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 139
readSFN-Indicator : True
tx-DiversityIndicator : False
[28] :
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 138
readSFN-Indicator : True
tx-DiversityIndicator : False
intraFreqReportingQuantityForRACH
sfn-SFN-OTD-Type : noReport
modeSpecificInfo : fdd
intraFreqRepQuantityRACH-FDD : cpich-EcN0
maxReportedCellsOnRACH : currentCell
interFreqMeasurementSysInfo
interFreqCellInfoSI-List
newInterFreqCellList
NewInterFreqCellSI-List-ECN0 :
[0 ] :
frequencyInfo
modeSpecificInfo : fdd
fdd
uarfcn-UL : 9612
uarfcn-DL : 10562
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 406
readSFN-Indicator : False
tx-DiversityIndicator : False
[1 ] :
frequencyInfo
modeSpecificInfo : fdd
fdd
uarfcn-UL : 9637
uarfcn-DL : 10587
cellInfo
modeSpecificInfo : fdd
primaryCPICH-Info
primaryScramblingCode : 355
readSFN-Indicator : False
tx-DiversityIndicator : False
interRATMeasurementSysInfo
interRATCellInfoList
removedInterRATCellList
RemovedInterRATCellList : removeAllInterRATCells
newInterRATCellList
NewInterRATCellList-B :
[0 ] :
technologySpecificInfo : gsm
interRATCellIndividualOffset : 0
bsic
ncc : 1
bcc : 2
frequency-band : dcs1800BandUsed
bcch-ARFCN : 668
[1 ] :
technologySpecificInfo : gsm
interRATCellIndividualOffset : 0
bsic
ncc : 7
bcc : 0
frequency-band : dcs1800BandUsed
bcch-ARFCN : 814
[2 ] :
technologySpecificInfo : gsm
interRATCellIndividualOffset : 0
bsic
ncc : 6
bcc : 3
frequency-band : dcs1800BandUsed
bcch-ARFCN : 667
[3 ] :
technologySpecificInfo : gsm
interRATCellIndividualOffset : 0
bsic
ncc : 7
bcc : 3
frequency-band : dcs1800BandUsed
bcch-ARFCN : 661
[4 ] :
technologySpecificInfo : gsm
interRATCellIndividualOffset : 0
bsic
ncc : 3
bcc : 2
frequency-band : dcs1800BandUsed
bcch-ARFCN : 811
[5 ] :
technologySpecificInfo : gsm
interRATCellIndividualOffset : 0
bsic
ncc : 0
bcc : 3
frequency-band : dcs1800BandUsed
bcch-ARFCN : 810
[6 ] :
technologySpecificInfo : gsm
interRATCellIndividualOffset : 0
bsic
ncc : 6
bcc : 7
frequency-band : dcs1800BandUsed
bcch-ARFCN : 664
[7 ] :
technologySpecificInfo : gsm
interRATCellIndividualOffset : 0
bsic
ncc : 5
bcc : 6
frequency-band : dcs1800BandUsed
bcch-ARFCN : 675
[8 ] :
technologySpecificInfo : gsm
interRATCellIndividualOffset : 0
bsic
ncc : 1
bcc : 4
frequency-band : dcs1800BandUsed
bcch-ARFCN : 665
[9 ] :
technologySpecificInfo : gsm
interRATCellIndividualOffset : 0
bsic
ncc : 5
bcc : 4
frequency-band : dcs1800BandUsed
bcch-ARFCN : 667
[10] :
technologySpecificInfo : gsm
interRATCellIndividualOffset : 0
bsic
ncc : 0
bcc : 3
frequency-band : dcs1800BandUsed
bcch-ARFCN : 996
[11] :
technologySpecificInfo : gsm
interRATCellIndividualOffset : 0
bsic
ncc : 0
bcc : 5
frequency-band : dcs1800BandUsed
bcch-ARFCN : 992
[12] :
technologySpecificInfo : gsm
interRATCellIndividualOffset : 0
bsic
ncc : 5
bcc : 5
frequency-band : dcs1800BandUsed
bcch-ARFCN : 663
System Information Message (SIB 19)

Time : 01:22:52.555
Vendor Header
UARFCN DL : 10712
Primary Scrambling Code : 115
utra-PriorityInfoList
priority : 5
s-PrioritySearch1 : 5
s-PrioritySearch2 : 7
threshServingLow : 5
eutra-FrequencyAndPriorityInfoList
EUTRA-FrequencyAndPriorityInfoList :
[0 ] :
earfcn : 1634
measurementBandwidth : mbw25
priority : 7
qRxLevMinEUTRA : -58
threshXhigh : 5
threshXlow : 7
eutraDetection : False
sysInfoType19-v920ext
utra-PriorityInfoList-v920ext
threshServingLow2 : 6
eutra-FrequencyAndPriorityInfoList-v920ext
EUTRA-FrequencyAndPriorityInfoList-v920ext :
[0 ] :
qqualMinEUTRA : -18
SIB(System Information Block) and their Details
SIB1 : NAS Information. UE Timers and counters to be used in RRC Idle & Connected State

SIB2: List of URA Identities

SIB3: Parameters for Cell Selection and Reselection

SIB4: Same as SIB3 but used in Connected State

SIB5: Configuration parameters of common physical channels in a cell. PCH and PICH Info (CPCH)

SIB6: Configuration of Common and Shared physical channel

SIB7: Contains fast changing UL interface params and dynamic. As this is changes often so controlled by timer

SIB8: Used in FDD . Static CPCH info of cell. Used in Connected mode only

SIB9: CPCH info. As it changed often, controlled by timers connected mode only.

SIB10 : DRAC Procedure, used when CELL_DCH controlled by timer

SIB11 : Measurement control information to be used in CELL

SIB12: Same as SIB11 but used in connected mode only

SIB13: For ANSI-41 . It also has 4 associated SIBS 13.1 to 13.4. Reference to subblocks. Used when System is AN

SIB14: Parameters for common and dedicated physicall DPCH UL outer loop power control info for TDD

SIB15: Assistance info for UE positioning. Used to reduce signalling by position. 15.1 to 15.5 sub sibs.

SIB16: Predefined channel conf. used while hand over. Radio Bearer transport channel, physical channel params to

SIB17: Shared channel info fo rTDD only

SIB18: PLMN Identities of neighbouring cells. Used in Shared Access N/w with the cell reselection process
tored by UE in idle/connected mode. Several occurances but UE doesnot bother.
Cause No. 1: Unallocated (unassigned number). This cause indicates that the destination requested by the calling user cannot b

Cause No. 2: no route to specified transit network. This cause indicates that the equipment sending this cause has received a re
This cause is supported on a network-dependent basis.

Cause No. 3: no route to destination. This cause indicates that the called user cannot be reached because the network through
This cause is supported on a network-dependent basis.

Cause No. 6: channel unacceptable. This cause indicates that the channel used in this call is not acceptable to the sending entit

Cause No.7: call awarded and being delivered in an established channel. This cause indicates that the user is receiving an incom

Cause No. 16: normal call clearing. This cause indicates that the call is being cleared because one of the users involved in the c

Cause No. 17: user busy. This cause is used when the called user has indicated the inability to accept another call.
It is noted that the user equipment is compatible with call.

Cause No. 18: no user responding. This cause is used when a user does not respond to a call establishment message with eithe

Cause No. 19: no answer from user (user alerted). This cause is used when a user has provided an alerting indication but has n
This cause is not necessarily generated by Q.931 procedures but may be generated by internal network timers.

Cause No. 21: call rejected. This cause indicates that the equipment sending this cause does not wish to accept this call, althou

Cause No. 22: number changed. This cause is returned to a calling user when the called party number indicated by the calling u

Cause No. 26: non-selected user clearing. This cause indicates that the specified user has not been awarded the incoming call.

Cause No. 27: destination out of order. This cause indicates that the destination indicated by the user cannot be reached becau

Cause No. 28: invalid number format (address incomplete). This cause indicates that the called user cannot be reached because

Cause No. 29: facility rejected. This cause is returned when a facility requested by the user cannot be provided by the network.

Cause No. 30: response to STATUS INQUIRY. This cause is included in the STATUS message when the reason for generated th

Cause No. 31: normal, unspecified. This cause is used to report a normal even only when no other cause in the normal class ap

Cause No. 34: no circuit/channel available. This cause indicates that there is no appropriate circuit/channel presently available t

Cause No. 38: network out of order. This cause indicates that the network is not functioning correctly and that/ the condition is

Cause No. 41: temporary failure. This cause indicates that the network is not functioning correctly and that the condition is not

Cause No. 42: switching equipment congestion. This cause indicates that the switching equipment generating this cause is expe
Cause No. 43: access information discarded. This cause indicates that the network could not deliver access information to the re
It is noted that the particular type of access information discarded is optionally included in the diagnostic.

Cause No. 44: requested circuit/channel not available. This cause is returned when the circuit or channel indicated by the reque

Cause No. 47: resource unavailable, unspecified. This cause is used to report a resource unavailable event only when no other

Cause No 49: Quality of Service not available. This cause is used to report that the requested Quality of Service, as defined in R

Cause No. 50: requested facility not subscribed. This cause indicates that the requested supplementary service could not be pro

Cause No 57: bearer capability not authorized. This cause indicates that the user has requested a bearer capability implemented

Cause No. 58: bearer capability not presently available. This cause indicates that the user has requested a bearer capability imp

Cause No 63: service or option not available, unspecified. This cause is used to report a service or option not available event on

Cause No. 65: bearer capability not implemented. This cause indicates that the equipment sending this cause does not support

Cause No. 66: channel type not implemented. This cause indicates that the equipment sending this cause does not support the

Cause No. 69: requested facility not implemented. This cause indicates that the equipment sending this cause does not support

Cause No. 70: only restricted digital information bearer capability is available. This cause indicates that a device has requested a

Cause No. 79: service or option not implemented, unspecified. This cause is used to report a service or option not implemented

Cause No. 81: invalid call reference value. This cause indicates that the equipment sending this cause has received a message w

Cause No. 82: identified channel does not exist. This cause indicates that the equipment sending this cause has received a requ

Cause No. 83: a suspended call exists, but this call identify does not. This cause indicates that a call resume has been attempte

Cause No. 84: call identity in use. This cause indicates that the network has received a call suspend request. The call suspend r

Cause No. 85: no call suspended. This call indicates that the network has received a call resume request. The call resume reque

Cause No. 86: call having the requested call identity has been cleared. This cause indicates that the network has received a call

Cause No. 88: incompatible destination. This cause indicates that the equipment sending this cause has received a request to e

Cause No. 91: invalid transit network selection. This cause indicates that a transit network identification of an incorrect format a

Cause No. 95: invalid message, unspecified. This cause is used to report an invalid message event only when no other cause in
Cause No. 96: mandatory information element is missing. This cause indicates that the equipment sending this cause has receiv

Cause No. 97: message type non-existent or not implemented. This cause indicates that the equipment sending this cause has

Cause No. 98: message not compatible with call state or message type non-existent or not implemented. This cause indicates th

Cause No. 99: information element non-existent or not implemented. This cause indicates that the equipment sending this caus

Cause No. 100: invalid information element contents. This cause indicates that the equipment sending this cause has received a

Cause No 101: message not compatible with call state. This cause indicates that a message has been received that is incompati

Cause No. 102: recovery on timer expiry. This cause indicates that a procedure has been initiated by the expiry of a timer in as

Cause No. 111: protocol error, unspecified. This cause is used to report a protocol error event only when no other cause in the

Cause No. 127: interworking, unspecified. This cause indicates there has been interworking with a network that does not provid
he transit network does not exist or because that particular network, while it does exist, does not serve the equipment that is sending this ca

nallocated) number, shall be used.

r: e.g., a physical layer or data link layer failure at the remote user, user equipment off-line, etc.
ser equipment or the network attempts to use channels 13 through 23, this cause is generated.

nded (either by network timeout or by remote user).


ATUS message was received indicating an incompatible call state.

quipment sending the cause. However, the information element is not required to be present in the message in order for the equipment se

ent sending this


equipment that is sending this cause.
ge in order for the equipment sending the cause to process the message.
1. System Information (BCCH)

The UE reads the System Information that is broadcast on BCCH. The information is not read continuously. It is only read if th

2. RRC: RRC Connection Request (CCCH)

The Mobile user decides to initiate a voice call. The first message the UE will send on CCCH is RRC Connection Request. This

3. NBAP: Radio Link Setup Request

The SRNC sends this message to Node B. It will pass the Cell Id, TFS, TFCS, frequency, UL Scrambling code, etc to Node B.

4. NBAP: Radio Link Setup Response

Node B allocates the resources and starts PHY Reception. While transmitting the response it includes the Transport layer addres

5. ALCAP: Establish REQ

The AAL2 binding identity (Iub Data Transport Bearer Id) is passed to ALCAP protocol in Node B. The Iub Data Transport bea

6. ALCAP: Establish CNF

Establish confirm from ALCAP in Node B

7: DCH-FP: Downlink Synchronisation

The Node B and SRNC establishes synchronisation for the Iub Data Transport bearer by means of exchange of the appropriate D

8: DCH-FP: Uplink Synchronisation

Once the UL synchronisation is acheived, Node B starts DL transmission.

9: RRC: RRC Connection Setup (CCCH)

RRC Connection Setup message is sent on CCCH with the parameters required to establish DCH. Also the state indicator will b

10: NBAP: Radio Link Restore Indication

Once the UE establishes Radio Link, Node B will send RL Restore indication to the SRNC.

11: RRC: RRC Connection Setup Complete (DCCH)

RRC Connection Setup complete will be sent on DCCH. Integrity and Ciphering related paarmeters and UE capability informat
12: RRC: Initial Direct Transfer [CM Service Request]

First NAS message is now sent by the UE. It indicates that a UE orginated Voice call is required. The UE identity (TMSI) will a

13: RANAP: Initial UE Message [CM Service Request]

The NAS message will be forwarded to appropriate CN Domain (CS Domain in this case). Along with the CM service request,

14: RANAP: Direct Transfer [Authentication Request]

MSC/VLR needs to perform authentication to make sure that the UE is genuine. For this reason it will challenge the UE with a

15: RRC: Downlink Direct Transfer [Authentication Request]

SRNC transfers the NAS message to the UE

16: RRC: Uplink Direct Transfer [Authentication Response]

UE computes the response (RES) and sends it back in the NAS message

17: RANAP: Direct Transfer [Authentication Response]

SRNC relays the response to the MSC/VLR. The MSC/VLR will compare the response RES with the expected response XRES

18: RANAP: Security Mode Command

MSC/VLR sends the Security Mode Command to start Ciphering and Integrity Protection. Ciphering is optional while Integrity

19: RRC: Security Mode Command

RRC Forwards the Security Mode command received from MSC/VLR to the UE.

20: RRC: Security Mode Complete

The UE configures the Ciphering and Integity Protection and responds back to the network. The response message is Integrity P

21: RANAP: Security Mode COmplete

The network forwards the Security Mode Complete message to MSC/VLR.

22: RANAP: Direct Transfer [TMSI Reallocation Command]

The network may decide to re-allocate the TMSI to the UE. It sends a DT message which includes the NAS TMSI Reallocation

23: RRC: DL Direct Transfer [TMSI Reallocation Command]


The RNC relays the DT message to the UE.

24: RRC: UL Direct TRansfer [TMSI Reallocation Complete]

The UE takes the new TMSI and responds with the Complete message

25: RANAP: Direct Transfer [TMSI Reallocation Complete]

The RNC relays the message to the CN domain

26: RRC: UL Direct TRansfer [Setup]

The UE now sends the 'Setup' message in UL Direct Transfer message. This will include all the required parameters for setting

27: RANAP: Direct TRansfer [Setup]

The network relays the message to the MSC/VLR

28: RANAP: Direct TRansfer [Call Proceeding]

The MSC/VLR sends Call Proceeding to the UE indicating that it is now starting with the RAB establishment procedure.

29: RRC: DL Direct TRansfer [Call Proceeding]

The network relays it to the UE.

30: RANAP: RAB Assignment Request

The CN initiates establishment of the Radio Access Bearer using the RAB Assignment Request message. This message include

31: ALCAP: Establish REQ

SRNC initiates the set-up of Iu Data Transport bearer using ALCAP protocol. The request contains the AAL2 Binding Identity t

32: ALCAP: Establish CNF

The CN responds with the ALCAP Establish CNF

33: NBAP: Radio Link Reconfiguration Prepare

SRNC requests Node B to prepare establishment of DCH to carry the RAB. It passes the TFS, TFCS and Power Control Inform

34: NBAP: Radio Link Reconfiguration Ready


Node B allocates the resources and responds with the Ready message. It sends back the AAL2 address and the AAL2 binding Id

35: ALCAP: Establish REQ

SRNC initiates setup of Iub Data Transport Bearer using ALCAP protocol. The request contains the AAL2 Binding Identity to b

36: ALCAP: Establish CNF

The Node B responds with the Establish Confirm.

37: DCH-FP: Downlink Synchronisation

The Node B and SRNC establish synchronism for the Iub Data Transport Bearer by means of exchange of the appropriate DCH

38: DCH-FP: Uplink Synchronisation

The Node B responds with the UE Synchronisation frames.

39: NBAP: Radio Link Reconfiguration Complete

Finally the SRNC instructs the Node B of the CFN at which the new configuration will come into effect.

40: RRC: Radio Bearer Setup

SRNC sends the RB Setup message to add the new DCH's. The message will be received using the old configuration.

41: RRC: Radio Bearer Setup Reponse

After the activation time the UE will respond with complete message using the new configuration.

42: RANAP: RAB Assignment Reponse

The SRNC responds with the response to the MSC/VLR.

43: ISUP: Initial Address Message

MSC/VLR sends the Initial Address Message to the PSTN. The message tells the PSTN to reserve an idle trunk circuit from ori

44: ISUP: Address Complete Message

The ACM message is sent to indicate that the remote end of the trunk circuit has been reserved.

45: RANAP: Direct Transfer [Alert]

The Alert message is sent to the SRNC. This message contains the ACM received from the PSTN.
46: RRC: Direct Transfer [Alert]

The Alert message is forwarded to the UE. The Alert message will inditiate the ringing tone on the handset.

47: ISUP: Answer Message

When the person that is being called picks up his phone, an Answer message is sent to the MSC/VLR.

48: RANAP: Direct Transfer [Connect]

The MSC/VLR sends the Connect message to the SRNC via Direct Transfer message. The Connect message indictaes that the E

49: RRC: DL Direct Transfer [Connect]

The SRNC forwards the Connect message to the UE.

50: RRC: UL Direct Transfer [Connect Acknowledge]

The UE confirms the reception of the Connect message using the Connect Acknowledge and sending it via Direct Transfer

51: RANAP: Direct Transfer [Connect Acknowledge]

The Network forwards the Connect Acknowledge to the MSC/VLR. The call has now been successfully established.
rers it is started in RLC.

Das könnte Ihnen auch gefallen