Beruflich Dokumente
Kultur Dokumente
www.messko.com
Gewerbegebiet An den Drei Hasen Fax +49 (0)61 71 63 98-98
www.messko.com
MESSKO MTO Series
Messko-Platz 1 info@messko.com
61440 Oberursel, Germany Transformer Oil Level Indicators
Please note: The information contained in all of our publications may differ in detail
from the actual equipment delivered. We reserve the right to make changes without notice.
IN 2069/02/01 EN 01/14 Art. no. MS99086101 Printed in Germany Messko GmbH 2014
MESSKO MTO Series
MTOST160 und MTOSTF 160
You can recognize adjustable limit switches Limit switches with a fixed setting are
The oil level indicator consists of a sensor
by the colored triangular switching levers identified by a line (switch marking) 5 near
assembly (Figure 1 a + b) and an indicator 2.
on the dial. The switching levers can be the MAX/MIN lettering. They are set at the
assembly (Figure 1 c) which are joined by a
adjusted over the entire dial range. factory and not adjustable in the field. contact load:
separable connection. The sensor assembly
Color of the switching levers MAX = blue, Indicator dials 250 V AC / 15 A / cosG = 1
has an oil-proof flange plate and is 12 V DC / 5 A (non-inductive)
distance distance MIN = red
mounted directly on the wall of the tank. tube length tube length 250 V DC / 0.25 A (non-inductive)
m n m n
A float rod transfers the lift motion of the m n
signal converter
float to a shaft. The shaft is connected via a a) b) c)
magnetic coupling with the pointer shaft in
the indicator assembly.
In addition to the standard indicator dial,
Figure 3
The floats are available in two different (Min, 20 C, Max; Figure 3 a), other versions
Figure 2 can be supplied on request (Figure 3b shows
drive variations to suit the particular type
of oil conservator (refer to Figure 2):
(Coninvers connector optional) one example).
a) radial motion float analog port digital port (optional)
view glass electrical rubber bag
b) axial motion float terminals RS 485 supplied as standard
m
You can recognize adjustable limit switches Limit switches with a fixed setting are
The oil level indicator consists of a sensor
by the colored triangular switching levers identified by a line (switch marking) 5 near
assembly (Figure 1 a + b) and an indicator 2.
on the dial. The switching levers can be the MAX/MIN lettering. They are set at the
assembly (Figure 1 c) which are joined by a
adjusted over the entire dial range. factory and not adjustable in the field. contact load:
separable connection. The sensor assembly
Color of the switching levers MAX = blue, Indicator dials 250 V AC / 15 A / cosG = 1
has an oil-proof flange plate and is 12 V DC / 5 A (non-inductive)
distance distance MIN = red
mounted directly on the wall of the tank. tube length tube length 250 V DC / 0.25 A (non-inductive)
m n m n
A float rod transfers the lift motion of the m n
signal converter
float to a shaft. The shaft is connected via a a) b) c)
magnetic coupling with the pointer shaft in
the indicator assembly.
In addition to the standard indicator dial,
Figure 3
The floats are available in two different (Min, 20 C, Max; Figure 3 a), other versions
Figure 2 can be supplied on request (Figure 3b shows
drive variations to suit the particular type
of oil conservator (refer to Figure 2):
(Coninvers connector optional) one example).
a) radial motion float analog port digital port (optional)
view glass electrical rubber bag
b) axial motion float terminals RS 485 supplied as standard
m
You can recognize adjustable limit switches Limit switches with a fixed setting are
The oil level indicator consists of a sensor
by the colored triangular switching levers identified by a line (switch marking) 5 near
assembly (Figure 1 a + b) and an indicator 2.
on the dial. The switching levers can be the MAX/MIN lettering. They are set at the
assembly (Figure 1 c) which are joined by a
adjusted over the entire dial range. factory and not adjustable in the field. contact load:
separable connection. The sensor assembly
Color of the switching levers MAX = blue, Indicator dials 250 V AC / 15 A / cosG = 1
has an oil-proof flange plate and is 12 V DC / 5 A (non-inductive)
distance distance MIN = red
mounted directly on the wall of the tank. tube length tube length 250 V DC / 0.25 A (non-inductive)
m n m n
A float rod transfers the lift motion of the m n
signal converter
float to a shaft. The shaft is connected via a a) b) c)
magnetic coupling with the pointer shaft in
the indicator assembly.
In addition to the standard indicator dial,
Figure 3
The floats are available in two different (Min, 20 C, Max; Figure 3 a), other versions
Figure 2 can be supplied on request (Figure 3b shows
drive variations to suit the particular type
of oil conservator (refer to Figure 2):
(Coninvers connector optional) one example).
a) radial motion float analog port digital port (optional)
view glass electrical rubber bag
b) axial motion float terminals RS 485 supplied as standard
m
Please note: The information contained in all of our publications may differ in detail
from the actual equipment delivered. We reserve the right to make changes without notice.
IN 2069/02/01 EN 01/14 Art. no. MS99086101 Printed in Germany Messko GmbH 2014
Messko GmbH Phone +49 (0)61 71 63 98-0
www.messko.com
Gewerbegebiet An den Drei Hasen Fax +49 (0)61 71 63 98-98
www.messko.com
MESSKO MTO Series
Messko-Platz 1 info@messko.com
61440 Oberursel, Germany Transformer Oil Level Indicators
Please note: The information contained in all of our publications may differ in detail
from the actual equipment delivered. We reserve the right to make changes without notice.
IN 2069/02/01 EN 01/14 Art. no. MS99086101 Printed in Germany Messko GmbH 2014