Beruflich Dokumente
Kultur Dokumente
0) REFERENCES
[1] W. Jan and P. Marek, MATHEMATICAL MODELING OF THE STIRLING
ENGINE, Procedia Eng., vol. 157, pp. 349356, 2016.
[2] Oberg R., Olsson F., Palsson M., Demonstration Stirling engine based Micro-CHP with
ultra-low emissions, Raport SGC 144, Mars 2004, 1102-7371, ISRN SGC-R-144-SE.
[3] Prymon M., Wrona J., Stirling cycle as an alternative in the construction of
refrigeration machinery, Technical Transactions. ISSUE 28, rok 109, No 4-/2012, pp.
157-165.
[4] Sun Lean, Zhao Yuanyang, Li Liansheng, Shu Pengcheng, Performance of a prototype
Stirling domestic refrigerator, Applied Thermal Engineering, 29 (2009), 210-215.
[5] Ueda Yuki , Biwaa Tetsushi, Yazakib Taichi, Mizutania Uchiro, Construction of a
thermoacustic Stirling cooler, Physica B 329-333 (2003) 1600-1601.
[13] D. Stanciu, Camelia Stanciu, Optimum tilt angle for flat plate collectors all over the
World - a declination dependence formula and comparisons of three solar radiation
models, Energy Convers. Manag. 81 (0) (2014) 133-143.
[15] A.B. Sproul, Derivation of the solar geometric relationships using vector analysis,
Renew. Energy 32 (7) (2007) 1187-1205.
[16] J. Duffie, W. Beckman, Solar Engineering of Thermal Processes, fourth ed., vol. 116,
John Wiley & Sons, Inc, 2013.
[19] M. Li, J. Dong, Modeling and simulation of solar Dish-Stirling systems, Asia-Pacific
Power Energy Eng. Conf. APPEEC (2012) 1-7.
[21] J.R. Howell, R.B. Bannerot, Optimum solar collector operation for maximing cycle
work output, Sol. Energy 19 (6) (1977) 149-153.
[22] H. Fathabadi, Comparative study between two novel sensorless and sensor based dual-
axis solar trackers, Sol. Energy, vol. 138, pp. 6776, 2016.
[23] Duffie, J.A., Beckman, W.A., 2013. Solar Engineering of Thermal Processes. Wiley.
ISBN: 978-0-470-87366-3.
[24] Reda, I., Andreas, A., 2004. Solar position algorithm for solar radiation applications.
Sol. Energy 76 (5), 577589.
[25] T. Kauri, S. Mahajan, S. Verma, and J. Gambhir, Arduino based Low Cost Active
Dual Axis Solar Tracker, pp. 26, 2016.