Beruflich Dokumente
Kultur Dokumente
Special Tool(s)
Disconnect Tool, Transmission Cooler
Line
307-569
Material
Item Specification
Motorcraft MERCON LV Automatic MERCON
Transmission Fluid LV
XT-10-QLVC (US); CXT-10-LV12 (Canada)
Removal
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom= 1/12
26/07/2017 2011 Edge
9. Using the special tool, disconnect the transmission fluid cooler return tube.
Special Tool(s): Disconnect Tool, Transmission Cooler Line 307-569.
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom= 2/12
26/07/2017 2011 Edge
16. Using the special tool, disconnect the transmission fluid cooler tubes.
Special Tool(s): Disconnect Tool, Transmission Cooler Line 307-569.
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom= 3/12
26/07/2017 2011 Edge
19. Remove and discard the transmission mounted transmission fluid cooler tube bolts.
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom= 4/12
26/07/2017 2011 Edge
20. Disconnect the transmission mounted transmission fluid cooler tubes at the thermal bypass valve.
21. Inspect the transmission case to be sure that the transmission mounted transmission fluid cooler tube seals
and backing rings were removed with the transmission mounted transmission fluid cooler tubes and are not
stuck in the transmission case. If the transmission mounted transmission fluid cooler tube seals or backing
rings are stuck in the transmission case, remove the seals and backing rings.
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom= 5/12
26/07/2017 2011 Edge
22. Remove the nuts and the thermal bypass valve.
Installation
2. NOTE: Inspect the transmission mounted transmission fluid cooler tube back ing rings and seals for damage
and install new back ing rings or seals if necessary.
Lubricate the transmission mounted transmission fluid cooler tube seals with transmission fluid and install the
backing rings and seals on the transmission mounted transmission fluid cooler tubes and install the
transmission fluid cooler tubes.
Material: Motorcraft MERCON LV Automatic Transmission Fluid XT-10-QLVC.
1. Seal (7D258)
2. Backing ring (7J324)
Tighten to 30 Nm (22 lb-ft).
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom= 6/12
26/07/2017 2011 Edge
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom= 7/12
26/07/2017 2011 Edge
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom= 8/12
26/07/2017 2011 Edge
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom= 9/12
26/07/2017 2011 Edge
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom= 10/12
26/07/2017 2011 Edge
14. Install the transmission fluid cooler return tube secondary latch.
18. Install the air cleaner outlet pipe. Refer to Section 303-12.
21. Check the transmission fluid level and add transmission fluid as necessary.
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom= 11/12
26/07/2017 2011 Edge
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom= 12/12