Beruflich Dokumente
Kultur Dokumente
Today, Wednesday, dated Thirteen of May in the year of Two Thousand and
Fifteen, Procurement Team (Pokja) of the Satker Pembangunan Tol Solo
Kertosono, has issued the Addendum of Bidding Document.
This Addendum will be uploaded to the Ministry of Public Works and Housing
website, http://www.pu.go.id, and will be available to be downloaded from 12
May 2015 up to 24 hour before the submission date
The undersigned declare that the Addendum No.1 of Bidding Document and
these attachments, made and provided in proper manner are complete, true and
correct.
This Addendum No.1 shall form an integral part of the Bidding Documents and is issued in
accordance with Clause 8 of Instructions to Applicants. All previous Bidding Documents
shall be deleted and replaced with the following:
Section 1 - Instructions to Bidders 1-1
Table of Clauses
A. General ............................................................................................................................................3
1. Scope of Bid...............................................................................................................................3
2. Source of Funds.........................................................................................................................3
3. Corrupt Practices .......................................................................................................................3
4. Eligible Bidders ..........................................................................................................................4
5. Eligible Materials, Equipment and Services...............................................................................6
F. Award of Contract........................................................................................................................ 19
38. Award Criteria.......................................................................................................................... 19
39. Notification of Award ............................................................................................................... 19
40. Signing of Contract .................................................................................................................. 20
41. Performance Security.............................................................................................................. 20
2. Source of Funds 2.1 The Borrower or Recipient (hereinafter called Borrower) indicated in
the BDS has applied for or received financing (hereinafter called
funds) from the Export Import Bank of China (hereinafter called
Bank) toward the cost of the project named in the BDS. The Borrower
intends to apply a portion of the funds to eligible payments under the
contract(s) for which this Bidding Document is issued.
2.2 Payments by the Bank will be made only at the request of the Borrower
and upon approval by the Bank in accordance with the terms and
conditions of the financing agreement between the Borrower and the
Bank (hereinafter called the Loan Agreement), and will be subject in all
respects to the terms and conditions of that Loan Agreement. No party
other than the Borrower shall derive any rights from the Loan
Agreement or have any claim to the funds.
3. Corrupt Practices 3.1 The Goverment of Indonesias (GOIs) Anticorruption Policy requires
bidders, suppliers, and contractors under Bank-financed contracts,
observe the highest standard of ethics during the procurement and
execution of such contracts. In pursuance of this policy, the Employer:
(a) defines, for the purposes of this provision, the terms set forth
below as follows:
1
(i) corrupt practice is the offering, giving, receiving or soliciting,
directly or indirectly, of anything of value to influence
improperly the actions of another party;
2
(ii) fraudulent practice is any act or omission, including a
misrepresentation, that knowingly or recklessly misleads, or
attempts to mislead, a party to obtain a financial or other
1
another party refers to a public official acting in relation to the procurement process or contract execution]. In this context, public
official includes China Exim Bank staff and employees of other organizations taking or reviewing procurement decisions.
2
a party refers to a public official; the terms benefit and obligation relate to the procurement process or contract execution; and the
act or omission is intended to influence the procurement process or contract execution.
(b) will reject a proposal for award if it determines that the bidder
recommended for award has, directly or through an agent,
engaged in corrupt, fraudulent, collusive, or coercive or obstructive
practices in competing for the Contract; and
3.2 In further pursuance of this policy, Bidders shall permit the Employer to
inspect any accounts and records and other documents relating to the
Bid submission and contract performance, and to have them audited
by auditors appointed by the Employer.
4. Eligible Bidders 4.1 A Bidder may be a private entity, government-owned entity - subject to
ITB 4.5 - or any combination of them with a formal intent to enter into
an agreement or under an existing agreement in the form of a Joint
Operation (JO) or under an existing agreement in the form of a Joint
Venture (JV). In the case of a JO or JV:
(a) all partners to the JO or JV shall be jointly and severally liable; and
3
parties refers to participants in the procurement process (including public officials) attempting to establish bid prices at artificial, non
competitive levels.
4
Party refers to a participant in the procurement process or contract execution.
4.2 A Bidder, and all parties constituting the Bidder, shall have the
nationality of an eligible country, in accordance with Section 5 (Eligible
Countries). A Bidder shall be deemed to have the nationality of a
country if the Bidder is a citizen or is constituted, or incorporated, and
operates in conformity with the provisions of the laws of that country.
This criterion shall also apply to the determination of the nationality of
proposed subcontractors or suppliers for any part of the Contract
including related services.
5. Eligible Materials, 5.1 The materials, equipment and services to be supplied under the
Equipment and Contract shall have as their countries of origin and agreed by the
Services Employer and all expenditures under the Contract will be limited to
such materials, equipment, and services. At the Employers request,
Bidders may be required to provide evidence of the origin of materials,
equipment and services.
5.2 For purposes of ITB 5.1 above, origin means the place where the
materials and equipment are mined, grown, produced or
manufactured, and from which the services are provided. Materials
and equipment are produced when, through manufacturing,
processing, or substantial or major assembling of components, a
commercially recognized product results that differs substantially in its
basic characteristics or in purpose or utility from its components.
PART II Requirements
Section 6 - Employers Requirements (ERQ)
6.2 The Invitation for Bids issued by the Employer is not part of the Bidding
Document.
6.3 The Employer is not responsible for the completeness of the Bidding
Document and its Addenda, if they were not obtained directly from the
source stated by the Employer in the Invitation for Bids.
6.4 The Bidder is expected to examine all instructions, forms, terms, and
specifications in the Bidding Document. Failure to furnish all
information or documentation required by the Bidding Document may
result in the rejection of the bid.
7.2 The Bidder is advised to visit and examine the Site of Works and its
surroundings and obtain for itself on its own responsibility all
information that may be necessary for preparing the bid and entering
into a contract for construction of the Works. The costs of visiting the
Site shall be at the Bidders own expense.
7.3 The Bidder and any of its personnel or agents will be granted
permission by the Employer to enter upon its premises and lands for
the purpose of such visit, but only upon the express condition that the
Bidder, its personnel, and agents will release and indemnify the
Employer and its personnel and agents from and against all liability in
respect thereof, and will be responsible for death or personal injury,
loss of or damage to property, and any other loss, damage, costs, and
expenses incurred as a result of the inspection.
7.6 Minutes of the pre-bid meeting, including the text of the questions
raised, without identifying the source, and the responses given,
together with any responses prepared after the meeting, will be
transmitted promptly to all Bidders who have acquired the Bidding
Document in accordance with ITB 6.3. Any modification to the Bidding
Document that may become necessary as a result of the pre-bid
meeting shall be made by the Employer exclusively through the issue
of an addendum pursuant to ITB 8 and not through the minutes of the
pre-bid meeting.
8. Amendment of 8.1 At any time prior to the deadline for submission of bids, the Employer
Bidding Document may amend the Bidding Document by issuing addenda.
8.2 Any addendum issued shall be part of the Bidding Document and shall
be communicated in writing to all who have obtained the Bidding
Document from the Employer in accordance with ITB 6.3.
C. Preparation of Bids
9. Cost of Bidding 9.1 The Bidder shall bear all costs associated with the preparation and
submission of its Bid, and the Employer shall not be responsible or
liable for those costs, regardless of the conduct or outcome of the
bidding process.
10. Language of Bid 10.1 The Bid, as well as all correspondence and documents relating to the
bid exchanged by the Bidder and the Employer, shall be written in the
language specified in the BDS. Supporting documents and printed
literature that are part of the Bid may be in another language provided
they are accompanied by an accurate translation of the relevant
passages in the language specified in the BDS, in which case, for
purposes of interpretation of the Bid, such translation shall govern.
12. Letter of Bid, and 12.1 The Letter of Bid and Schedules, including the Bill of Quantities, shall
Schedules be prepared using the relevant forms furnished in Section 4 (Bidding
Forms). The forms must be completed without any alterations to the
text, and no substitutes shall be accepted. All blank spaces shall be
filled in with the information requested.
13. Alternative Bids 13.1 Unless otherwise indicated in the BDS, alternative bids shall not be
considered.
13.2 When alternative times for completion are explicitly invited, a statement
to that effect will be included in the BDS, as will the method of
evaluating different times for completion.
13.3 Except as provided under ITB 13.4 below, Bidders wishing to offer
technical alternatives to the requirements of the Bidding Document
must first price the Employers design as described in the Bidding
Document and shall further provide all information necessary for a
complete evaluation of the alternative by the Employer, including
drawings, design calculations, technical specifications, breakdown of
prices, and proposed construction methodology and other relevant
details. Only the technical alternatives, if any, of the lowest evaluated
Bidder conforming to the basic technical requirements shall be
considered by the Employer.
13.4 When specified in the BDS, Bidders are permitted to submit alternative
technical solutions for specified parts of the Works. Such parts will be
identified in the BDS and described in Section 6 (Employers
Requirements). The method for their evaluation will be stipulated in
Section 3 (Evaluation and Qualification Criteria).
14. Bid Prices and 14.1 The prices and discounts quoted by the Bidder in the Letter of Bid and
Discounts in the Bill of Quantities shall conform to the requirements specified
below.
14.2 The Bidder shall fill in rates and prices for all items of the Works
described in the Bill of Quantities. Items against which no rate or price
is entered by the Bidder will not be paid for by the Employer when
executed and shall be deemed covered by the rates for other items
and prices in the Bill of Quantities. If the bidder that submitted the
lowest evaluated bid does not accept to carry out the items against
which have no rate or price, its bid shall be rejected, and the bid
security, if any, shall be forfeited.
14.3 The price to be quoted in the Letter of Bid, in accordance with ITB
12.1, shall be the total price of the Bid, excluding any discounts
offered.
14.4 The Bidder shall quote any unconditional discounts and the methodo-
logy for their application in the Letter of Bid, in accordance with ITB
12.1.
14.5 Unless otherwise provided in the BDS and the Contract, the rates and
prices quoted by the Bidder are subject to adjustment during the
performance of the Contract in accordance with the provisions of the
Conditions of Contract. In such a case, the Bidder shall furnish the
indices and weightings for the price adjustment formulae in the Tables
of Adjustment Data included in Section 4 (Bidding Forms) and the
Employer may require the Bidder to justify its proposed indices and
weightings.
14.6 If so indicated in ITB 1.1, bids are being invited for individual contracts
or for any combination of contracts (packages). Bidders wishing to
offer any price reduction for the award of more than one Contract shall
specify in their bid the price reductions applicable to each package, or
alternatively, to individual Contracts within the package. Price
reductions or discounts shall be submitted in accordance with ITB
14.4, provided the bids for all contracts are submitted and opened at
the same time.
14.7 All duties, taxes, and other levies payable by the Contractor under the
Contract, or for any other cause, as of the date 28 days prior to the
deadline for submission of bids, shall be included in the rates and
prices and the total Bid Price submitted by the Bidder.
15. Currencies of Bid 15.1 The unit rates and the prices shall be quoted by the bidder entirely in
and Payment the currency specified in the BDS.
15.2 Bidders shall indicate the portion of the bid price that corresponds to
expenditures incurred in the currency of the Employers country in the
Schedule of Payment Currencies included in Section 4 (Bidding
Forms).
(e) foreign insurance and freight charges for imported materials, Plant
and Contractor's Equipment, including spare parts; and
15.7 Bidders should note that during the progress of the Works, the foreign
currency requirements of the outstanding balance of the Contract Price
may be adjusted by agreement between the Employer and the
Contractor in order to reflect any changes foreign currency
requirements for the Contract, in accordance with Sub-Clause 14.15 of
the Conditions of Contract. Any such adjustment shall be effected by
comparing the percentages quoted in the bid with the amounts already
used in the Works and the Contractor's future needs for imported
items.
16. Documents 16.1 The Bidder shall furnish a Technical Proposal including a statement of
Comprising the work methods, equipment, personnel, schedule and any other
Technical information as stipulated in Section 4 (Bidding Forms), in sufficient
Proposal detail to demonstrate the adequacy of the Bidders proposal to meet
the work requirements and the completion time.
17. Documents 17.1 To establish its qualifications to perform the Contract in accordance
Establishing the with Section 3 (Evaluation and Qualification Criteria) the Bidder shall
Qualifications of provide the information requested in the corresponding information
the Bidder sheets included in Section 4 (Bidding Forms).
18. Period of Validity 18.1 Bids shall remain valid for the period specified in the BDS after the bid
of Bids submission deadline date prescribed by the Employer. A bid valid for a
shorter period shall be rejected by the Employer as nonresponsive.
19. Bid Security 19.1 Unless otherwise specified in the BDS, the Bidder shall furnish as part
of its bid, in original form, either a Bid Securing Declaration or a bid
security as specified in the BDS. In the case of a bid security, the
amount shall be as specified in the BDS.
19.2 A Bid Securing Declaration shall use the form included in Section 4
(Bidding Forms). The Employer will declare a Bidder ineligible to be
awarded a Contract for a specified period of time if the Bid Securing
Declaration is executed.
19.3 The bid security shall be, at the Bidders option, in any of the following
forms:
(a) an unconditional bank guarantee;
(b) an irrevocable letter of credit; or
(c) a cashiers or certified check;
all from a reputable source from an eligible country. In the case of a
bank guarantee, the bid security shall be submitted either using the Bid
Security Form included in Section 4 (Bidding Forms) or another form
acceptable to the Employer. The form must include the complete
name of the Bidder. The bid security shall be valid for twenty-eight
days (28) beyond the original validity period of the bid, or beyond any
period of extension if requested under ITB 18.2.
19.4 Any bid not accompanied by an enforceable and compliant bid
security, if one is required in accordance with ITB 19.1, shall be
rejected by the Employer as nonresponsive.
19.5 If a bid security is specified pursuant to ITB 19.1, the bid security of
unsuccessful Bidders shall be returned as promptly as possible upon
the successful Bidders furnishing of the performance security pursuant
to ITB 41.
19.6 If a bid security is specified pursuant to ITB 19.1, the bid security of the
successful Bidder shall be returned as promptly as possible once the
successful Bidder has signed the Contract and furnished the required
performance security.
19.7 The bid security may be forfeited or the Bid Securing Declaration
executed:
(a) if a Bidder withdraws its bid during the period of bid validity
specified by the Bidder on the Letter of Bids, except as provided in
ITB 18.2 or
(b) if the successful Bidder fails to:
(i) sign the Contract in accordance with ITB 40; or
(ii) furnish a performance security in accordance with ITB 41; or
(iii) accept correction of arithmetical errors in accordance with ITB
31; or
(iv) provide increased Performance Security due to a seriously
unbalance bid or front loaded bid in accordance with ITB 34.5
or ITB 34.6; or.
(v) accept to carry out the items against which have no rate or
price in accordance with ITB 14.2.
19.8 The Bid Security of a JV shall be in the name of the JV that submits
the bid. If the JV has not been legally constituted at the time of bidding,
the Bid Security shall be in the names of all future partners as named
in the letter of intent mentioned in ITB 4.1.
20. Format and 20.1 The Bidder shall prepare one original of the documents comprising the
Signing of Bid bid as described in ITB 11 and clearly mark it ORIGINAL. Alternative
bids, if permitted in accordance with ITB 13, shall be clearly marked
ALTERNATIVE. In addition, the Bidder shall submit copies of the bid,
in the number specified in the BDS and clearly mark them COPY. In
the event of any discrepancy between the original and the copies, the
original shall prevail.
20.2 The original and all copies of the bid shall be typed or written in
indelible ink and shall be signed by a person duly authorized to sign on
behalf of the Bidder. This authorization shall consist of a written
confirmation as specified in the BDS and shall be attached to the bid.
The name and position held by each person signing the authorization
must be typed or printed below the signature. All pages of the bid,
except for unamended printed literature, shall be signed or initialed by
the person signing the bid.
(d) bear a warning not to open before the time and date for bid
opening.
21.3 If all envelopes are not sealed and marked as required, the Employer
will assume no responsibility for the misplacement or premature
opening of the bid.
22. Deadline for 22.1 Bids must be received by the Employer at the address and no later
Submission of than the date and time indicated in the BDS. When so specified in the
Bids BDS, Bidders shall have the option of submitting their bids
electronically. Bidders submitting bids electronically shall follow the
electronic bid submission procedures specified in the BDS.
22.2 The Employer may, at its discretion, extend the deadline for the
submission of bids by amending the Bidding Document in accordance
with ITB 8, in which case all rights and obligations of the Employer and
Bidders previously subject to the deadline shall thereafter be subject to
the deadline as extended.
23. Late Bids 23.1 The Employer shall not consider any bid that arrives after the deadline
for submission of bids, in accordance with ITB 22. Any bid received by
the Employer after the deadline for submission of bids shall be
declared late, rejected, and returned unopened to the Bidder.
24. Withdrawal, 24.1 A Bidder may withdraw, substitute, or modify its bid after it has been
Substitution, and submitted by sending a written notice, duly signed by an authorized
Modification of representative, and shall include a copy of the authorization in
Bids accordance with ITB 20.2, (except that withdrawal notices do not
require copies). The corresponding substitution or modification of the
bid must accompany the respective written notice. All notices must be:
(a) prepared and submitted in accordance with ITB 20 and ITB 21
(except that withdrawal notices do not require copies), and in
addition, the respective envelopes shall be clearly marked
WITHDRAWAL, SUBSTITUTION, MODIFICATION; and
(b) received by the Employer prior to the deadline prescribed for
submission of bids, in accordance with ITB 22.
25. Bid Opening 25.1 The Employer shall open the bids in public at the address, date and
time specified in the BDS in the presence of Bidders` designated
representatives and anyone who choose to attend. Any specific
electronic bid opening procedures required if electronic bidding is
25.3 All other envelopes shall be opened one at a time, reading out: the
name of the Bidder and whether there is a modification; the Bid
Price(s), including any discounts and alternative offers; the presence of
a bid security, if required; and any other details as the Employer may
consider appropriate. Only discounts and alternative offers read out at
bid opening shall be considered for evaluation. Unless otherwise
specified in the BDS, all pages of the Letter of Bid and Bill of Quantities
are to be initialed by at least three representatives of the Employer
attending bid opening. No bid shall be rejected at bid opening except
for late bids, in accordance with ITB 23.1.
25.4 The Employer shall prepare a record of the bid opening that shall
include, as a minimum: the name of the Bidder and whether there is a
withdrawal, substitution, or modification; the Bid Price, per contract if
applicable, including any discounts and alternative offers; and the
presence or absence of a bid security, if one was required. The
Bidders representatives who are present shall be requested to sign
the record. The omission of a Bidders signature on the record shall not
invalidate the contents and effect of the record. A copy of the record
shall be distributed to all Bidders.
26.3 Notwithstanding ITB 26.2, from the time of bid opening to the time of
Contract award, if any Bidder wishes to contact the Employer on any
matter related to the bidding process, it may do so in writing.
27. Clarification of 27.1 To assist in the examination, evaluation, and comparison of the bids,
Bids and qualification of the Bidders, the Employer may, at its discretion,
ask any Bidder for a clarification of its bid. Any clarification submitted
by a Bidder that is not in response to a request by the Employer shall
not be considered. The Employers request for clarification and the
response shall be in writing. No change in the prices or substance of
the bid shall be sought, offered, or permitted, except to confirm the
correction of arithmetic errors discovered by the Employer in the
evaluation of the bids, in accordance with ITB 31.
27.2 If a Bidder does not provide clarifications of its bid by the date and time
set in the Employers request for clarification, its bid may be rejected.
28. Deviations, 28.1 During the evaluation of bids, the following definitions apply:
Reservations, and
(a) Deviation is a departure from the requirements specified in the
Omissions
Bidding Document;
(b) Reservation is the setting of limiting conditions or withholding
from complete acceptance of the requirements specified in the
Bidding Document; and
(c) Omission is the failure to submit part or all of the information or
documentation required in the Bidding Document.
29.3 The Employer shall examine the technical aspects of the bid submitted
in accordance with ITB 16, Technical Proposal, in particular, to confirm
that all requirements of Section 6 (Employers Requirements) have
been met without any material deviation or reservation.
29.4 If a bid is not substantially responsive to the requirements of the
Bidding Document, it shall be rejected by the Employer and may not
subsequently be made responsive by correction of the material
deviation, reservation, or omission.
30. Nonmaterial 30.1 Provided that a bid is substantially responsive, the Employer may
Nonconformities waive any nonconformities in the bid that do not constitute a material
deviation, reservation or omission.
31. Correction of 31.1 Provided that the bid is substantially responsive, the Employer shall
Arithmetical correct arithmetical errors on the following basis:
Errors
(a) if there is a discrepancy between the unit price and the total price
that is obtained by multiplying the unit price and quantity, the unit
price shall prevail and the total price shall be corrected, unless in
the opinion of the Employer there is an obvious misplacement of
the decimal point in the unit price, in which case the total price as
quoted shall govern and the unit price shall be corrected;
(b) if there is an error in a total corresponding to the addition or
subtraction of subtotals, the subtotals shall prevail and the total
shall be corrected; and
(c) if there is a discrepancy between words and figures, the amount in
words shall prevail, unless the amount expressed in words is
related to an arithmetic error, in which case the amount in figures
shall prevail subject to (a) and (b) above.
31.2 If the Bidder that submitted the lowest evaluated bid does not accept
the correction of errors, its bid shall be disqualified and its bid security
may be forfeited.
32. Conversion to 32.1 For evaluation and comparison purposes, the currency(ies) of the bid
Single Currency shall be converted into a single currency as specified in the BDS.
33. Margin of 33.1 Unless otherwise specified in the BDS, a margin of preference shall
Preference not apply.
34. Evaluation of Bids 34.1 The Employer shall use the criteria and methodologies listed in this
Clause. No other evaluation criteria or methodologies shall be
permitted.
(a) the bid price, excluding Provisional Sums and the provision, if any,
for contingencies in the Summary Bill of Quantities, but including
Daywork items, where priced competitively;
(d) converting the amount resulting from applying (a) to (c) above, if
relevant, to a single currency in accordance with ITB 32;
34.4 If this Bidding Document allows Bidders to quote separate prices for
different contracts, and the award to a single Bidder of multiple
contracts, the methodology to determine the lowest evaluated price of
the contract combinations, including any discounts offered in the Bid
Submission Sheet, is specified in Section 3 (Evaluation and
Qualification Criteria).
34.5 If the bid, which results in the lowest Evaluated Bid Price, is seriously
unbalanced or front loaded in the opinion of the Employer, the
Employer may require the Bidder to produce detailed price analyses
for any or all items of the Bill of Quantities, to demonstrate the internal
consistency of those prices with the construction methods and
schedule proposed. After evaluation of the price analyses, taking into
consideration the schedule of estimated Contract payments, the
Employer may require that the amount of the performance security be
increased at the expense of the Bidder to a level sufficient to protect
the Employer against financial loss in the event of default of the
successful Bidder under the Contract.
34.6 If the bid price is less than eight (80) percent of the Owner Estimate,
the following clarification or evaluation of reasonable bid price should
be carried out :
(a) Checking the reasonableness of basic unit rate for wage, material
and equipment in the breakdown analysis of the unit rate offered,
at least the pay item cost of more than 2% of the Bid Price.
(c) Calculating the unit rate without taking into account of profit offered
based on the above mentioned point (a) and (b) and
(d) Calculating the total cost based on the quantities in the Bill of
Quantities and the reasonable unit rates result as above
mentioned point (c)
If the total bid price offered is less than the evaluated total cost as
above mentioned point (d), the bid price to be considered as
unreasonableness and this bid shall be disqualified.
If the total bid price offered is more than the evaluated total cost as
above mentioned point (d), the bid price to be considered as
reasonableness and if the bidder to be awarded, a Performance
Security of five (5) percent of the Owner Estimate shall be provided.
34.7 If an Evaluated Bid Price is higher than the Owner Estimate, the Bid
shall be disqualified.
34.8 If the number of Bidders is less than three (3), it should be re-tendered.
35. Comparison of 35.1 The Employer shall compare all substantially responsive bids to
Bids determine the lowest evaluated bid, in accordance with ITB 34.2.
36. Qualification of 36.1 The Employer shall determine to its satisfaction whether the Bidder
the Bidder that is selected as having submitted the lowest evaluated and
substantially responsive bid meets the qualifying criteria specified in
Section 3 (Evaluation and Qualification Criteria).
37. Employers Right 37.1 The Employer reserves the right to accept or reject any bid, and to
to Accept Any Bid, annul the bidding process and reject all bids at any time prior to
and to Reject Any contract award, without thereby incurring any liability to Bidders. In
or All Bids case of annulment, all bids submitted and specifically, bid securities,
shall be promptly returned to the Bidders.
F. Award of Contract
38. Award Criteria 38.1 The Employer shall award the Contract to the Bidder whose offer has
been determined to be the lowest evaluated bid and is substantially
responsive to the Bidding Document, provided further that the Bidder is
determined to be qualified to perform the Contract satisfactorily.
39. Notification of 39.1 Prior to the expiration of the period of bid validity, the Employer shall
Award notify the successful Bidder, in writing, that its bid has been accepted.
39.2 At the same time, the Employer will publish in an English language
newspaper or well-known freely accessible website the results
identifying the bid and lot numbers and the following information: (i)
name of each Bidder who submitted a Bid; (ii) bid prices as read out at
bid opening; (iii) name and evaluated prices of each Bid that was
evaluated; (iv) name of bidders whose bids were rejected and the
reasons for their rejection; and (v) name of the winning Bidder, and the
price it offered, as well as the duration and summary scope of the
contract awarded. After publication of the award, unsuccessful bidders
may request in writing to the Employer for a debriefing seeking
explanations on the grounds on which their bids were not selected.
The Employer shall promptly respond in writing to any unsuccessful
Bidder who, after Publication of contract award, requests a debriefing.
40. Signing of 40.1 Promptly after notification, the Employer shall send the successful
Contract Bidder the Contract Agreement.
40.2 Within twenty-eight (28) days of receipt of the Contract Agreement, the
successful Bidder shall sign, date, and return it to the Employer.
41. Performance 41.1 Within twenty-eight (28) days of the receipt of notification of award
Security from the Employer, the successful Bidder shall furnish the performance
security in accordance with the conditions of contract, subject to ITB
34.5, using for that purpose the Performance Security Form included in
Section 9 (Contract Forms), or another form acceptable to the
Employer.
41.3 The above provision shall also apply to the furnishing of a domestic
preference security if so required
A. Introduction
ITB 1.1 The number of the Invitation for Bids is: not applicable
ITB 1.1 The Employer is: Directorate General of Highways, Ministry of Public Works
and Housing, Republic of Indonesia.
ITB 1.1 The name of the ICB is: Toll Road Development of Solo - Kertosono Phase I.
ITB 2.1 The name of the Project is: Road and Bridge Infrastructure Development
Project (RBIDP).
B. Bidding Documents
ITB 7.1 For clarification purposes only, the Employers address is:
Country : Indonesia
ITB 7.4 A Pre-Bid meeting will take place at the following date, time and place:
City: Surakarta
ZIP Code:
Country: Indonesia
C. Preparation of Bids
ITB 11.1 (h) The Bidder shall submit with its bid the following additional documents: Not
Applicable.
ITB 14.5 The prices quoted by the bidder shall be subject to price adjustment with the
general type formula as specified in Sub-clause 13.8 of the Particulation
Conditions of Contract.
ITB 15.1 The unit rates and prices shall be quoted by the Bidder in the Bill of Quantities
separately in the following currencies:
(i) for those inputs to the Works that the Bidder expects to supply from within
the Employers country, in Indonesian Rupiah, and further referred to as the
local currency; and
(ii) for those inputs to the Works that the Bidder expects to supply from outside
the Employers country (referred to as the foreign currency requirements),
ITB 15.3 Delete Sub-Clause 15.3 entirely and replace with the following :
ITB 15.5 Delete Sub-Clause 15.5 entirely and replace with the following :
ITB 18.1 The bid validity period shall be one hundred and eighty (180) days.
The amount and currency of the bid security shall be equal to Rp.66,000,000,000
(sixty six billion Rupiah).
ITB 19.3.(a) Only an unconditional bank guarantee that is issued by a reputable commercial
bank is acceptable. Any form of bid security issued by rural credit bank (bank
perkreditan rakyat) in Indonesia is not acceptable.
ITB 20.1 In addition to the original of the bid, the number of copies is : 0 (zero)
The Application shall be submitted electronically.
ITB 20.2 The written confirmation of authorization to sign on behalf of the Bidder shall
consist of: copies of original documents defining the constitution or legal
status, place of registration, and principal place of business, written power
of attorney of the signatory of the Bid to commit the Bidder (for each
partner of joint operation or joint venture if the JO or JV apply).
ITB 21.1 All qualified bidders International and Local shall download the bidding
documents in the e-procurement system through the Ministry of Public Works
website at www.pu.go.id
ITB 21.2 Except the original bid security, any bid (including all appendices such as the
updating qualification data) shall be submitted electronically.
ITB 21.3 The submission of original bid in hardcopy shall be carried out only for the bids to
be proposed as the candidate of winner, second and third candidate of winner, as
requested by the Employer.
ITB 21.4 In the event of discrepancy between the electronic bid and original bid in hard
copy, the bid shall be disqualified.
ITB 22.1 For bid submission purposes only, the Employers address is:
ITB 22.1 Electronic bid submission shall be carried out and bidders shall follow the
following electronic bid submission procedure:
(a) The procedures to download the bidding documents and upload the bid is as
follows :
(iv) Fill the User ID and Password in the left column, and click on Login
(vi) Click on Undangan Peserta Lulus Kualifikasi (Invitation for the Qualified
Bidders).
(vii) To download the bidding documents, click on the file name of bidding
documents.
viii) Click on Save to save the file into the Hard Disk without change the file
name.
(iv) Click on Registrasi bagi Penyedia Jasa yang belum memiliki User ID
(Registration for the Bidders who has no User ID) in the left column or
fill the User ID and Password, and click Login for the Bidders who
have the User ID.
(viii) Click on Browse to select the bid document in zip or rar for
uploading and then click Kirim (sent). Uploading document can be
carried out more than one time.
(c) The Bid shall be submitted electronically except the original bid security
and if the bid file is declared unclear to be read or can not be opened by the
Employer, the application shall be disqualified. The submission of original
qualification data in hardcopy shall be carried out only for the applications to
be proposed as the candidate of winner, second and third candidate of
winner. In the event of discrepancy between the electronic application and
original application in hardcopy, the application shall be disqualified.
City: Surakarta
ZIP Code:
Country: Indonesia
(a) The bid opening shall take place directly after submission.
(b) At least two witnesses shall be appointed from the Bidders. If the
witnesses are less than two, the bid opening shall be postponed by two
hours. After this postponement period, if the number of witnesses is still
less than two, witnesses to make up the total required shall be appointed
by the Procurement Team but shall not include the Employer or his
representative.
(c) Nonattendance at the bid opening will not be a cause for disqualification of
a Bidder.
ITB 25.2 Delete Sub-clause 25.2 entirely and replace with the following:
In the event when the occurrence of same electronic file, the latest date of file to
be uploaded shall govern.
ITB 25.3 The Letter of Bid and Bill of Quantities shall not be initialed by representatives of
the Employer attending Bid opening.
ITB 32.1 The currency that shall be used for bid evaluation and comparison purposes to
convert all bid prices expressed in various currencies into a single currency is:
Indonesian Rupiah (IDR).
The source of exchange rate shall be: the transaction selling rate officially
established by Bank of Indonesia at:
http://www.bi.go.id/id/moneter/informasi-kurs/transaksi-bi/Default.aspx
The date for the exchange rate shall be: 28 days prior to the latest date of bid
submission.
ITB 33.1 A margin of preference shall apply. The application methodology is stipulated in
Section 3 (Evaluation and Qualification Criteria).
ITB 34.6 The Owner Estimate excluding Provisional Sum and including Value Added Tax
of 10% is Rp.3,354,600,000,000 (Three Thousand Three Hundred and Fifty
Four Billion Six Hundred Million Rupiah).
(a) The bidders may submit objections to the Procurement Team (Pokja)
simultaneously copied to the PPK, Minister of Public Works as Fund User
(Pengguna Anggaran, PA) / Chief of Unit Work (Kasatker) as Authorized
Fund User (Kuasa Pengguna Anggaran), and the related Government
Internal Control Officer (Aparat Pengawas Intern Pemerintah, APIP) no later
than five (5) working days after the contract award.
(i) Deviations from the procedures and requirements stated in the Bidding
Documents.
(c) The Procurement Team shall reply in writing to all objections received
relating to the contract award no later than 5 (five) working days after the
objection is received.
(d) In the event that the objection is correct, the Procurement Team shall declare
that the tender fails.
(e) The objections are submitted to the non Procurement Team or submitted
beyond the objection period, they shall be considered as complaints and
shall be replied. The complaints are not able to stop the tender process.
(f) In the event that the bidder is not satisfied to the reply from the Procurement
Team, the bidder may appeal to the Minister of Public Works and Housing
accompanied by an Unconditional Bank Gurantee as an Appeal Security with
an amount of 1% (one percent) of the Owner Estimate and security validity
period of fifteen (15) days after the submission date of the appeal, no later
than 5 (five) working days after the reply is received.
(f) In the event that the appeal is correct, Minister of Public Works and Housing
shall instruct the Procurement Team to re-evaluate or re-bid. In this case, the
Appeal Security shall be returned to the bidder. However, in the event that
the appeal is not correct, Minister of Public Works and Housing shall instruct
the Procurement Team to continue the tender process. In this case, the
Appeal Security shall be forfeited.
(g) The appeals are submitted to the non Minister of Public Works and Housing
or submitted beyond the appeal period, they shall be considered as
complaints and shall be replied. The complaints are not able to stop the
tender process.
This Section contains all the criteria that the Employer shall use to evaluate bids and qualify Bidders. In
accordance with ITB 34 and ITB 36, no other methods, criteria and factors shall be used. The Bidder
shall provide all the information requested in the forms included in Section 4 (Bidding Forms).
Table of Criteria
1. Evaluation.........................................................................................................................................2
1.1 Adequacy of Technical Proposal.................................................. Error! Bookmark not defined.
1.2 Multiple Contracts......................................................................... Error! Bookmark not defined.
1.3 Domestic Preference .................................................................... Error! Bookmark not defined.
2. Qualification .....................................................................................................................................3
2.1 Financial Resources ......................................................................................................................3
2.2 Personnel ......................................................................................................................................3
2.3 Equipment .....................................................................................................................................5
2.4 Updating of Information .................................................................................................................6
1. Evaluation
In addition to the criteria listed in ITB 34.2 (a) (e) the following criteria shall apply:
(v) The preference factor of 7.5% shall apply to the substantially responsive bids by the domestic
bidders which have higher bids than the lowest substantially responsive bid by the foreign
bidders.
(vi) For the purpose of further evaluation and comparison of bids only, after the preference factor to be
taken account, the adjusted bid price of the domestic bidders shall be calculated with the following
formula :
HEA = [1/(1+KP)] x HP
where :
HEA : Adjusted bid price of the domestic bidders, excluding the Provisional Sum.
KP : The Domestic Components (TKDN) multiplies with the preference factor of 7.5%.
HP : The evaluated bid price of the domestic bidders excluding the Provisional Sum,
determined in accordance with the provisions of ITB 34.2 (a), (b), (d), and where
applicable (c), will be added.
(vii) In the event, when two or more bidders have an equal adjusted bid price, the bidder with a higher
Domestic Components shall be the winner
2. Qualification
2.2 Personnel
The Bidder must demonstrate that it has the personnel for the key positions that meet the following
requirements:
The Bidder shall provide details of the proposed personnel and their experience records in the relevant
Information Forms included in Section 4 (Bidding Forms).
1. Similarity of the Work:
The Evaluation of personnel experience in similar work shall be rated in accordance to the three
criteria found below. The total rating for each criterion shall be multiplied to the number years of
experience for each criterion. The total number of years for each criteria will be added together to
get the result of the number of years of experience.
The Proposed Personnel for GS & DGS with an equivalent minimum of 10 years of similar work
experience will automatically be qualified and
Proposed Personnel for SM with an equivalent minimum of 10 years of similar work experience
will automatically be qualified and
Proposed Personnel for QCM & DQCM with an equivalent minimum of 10 years of similar work
experience will automatically be qualified.
Similar Highway, Runway, Toll Road, Bridges, Fly Over, Underpass. 1.00
Others School, Office, Market, Buildings, Dam, Irrigation, Water Supply, 0.00
Sanitation, Harbor.
B. Site Manager
The Evaluation of personnel experience in similar position of Site Manager shall be rated in
accordance to the four criteria found below. The total rating for each criteria shall be
multiplied to the number years of experience for each criteria. The total number of years
for each criteria will be added together to get the result of the total years of experience. The
Proposed Personnel for Site Manager with an equivalent minimum of 5 years of experience
in similar position will be automatically qualified.
2.3 Equipment
Equipment for pre-qualification owned, or agreement to lease or rent or commitment to purchase.
This list does not constitute a complete or sufficient equipment set for the project. It is the minimum
equipment set the bidder must either own or be able to demonstrate access via agreement to purchase,
or lease or via an acceptable subcontract or supply agreement, to pass the Qualification.
Bidder should note that the minimum features of some equipment items are more fully specified than
has been customary in the past. The features listed are required to satisfy regarded as a minimum
requirement for the project.
For Bored Piling work (if any) bidders may nominate a suitable sub-contractor which has the specified
equipment and who will carry out the work
5. Slip form paver, minimum width range 3.0-6.0 m, min. 150 cu.m/hour 2
The Bidder shall provide further details of proposed items of equipment using the relevant Form in
Section 4 (Bidding Forms).
Table of Forms
Date: ..................................................
ICB No.: ..................................................
Invitation for Bid No.: ..................................................
To: .............................................................................................................................................................
(a) We have examined and have no reservations to the Bidding Documents, including
Addenda issued in accordance with Instructions to Bidders (ITB) 8;
(b) We offer to execute in conformity with the Bidding Documents the following Works:
(c) The total price of our Bid, excluding any discounts offered in item (d) below is:
(d) The discounts offered and the methodology for their application are:
(e) Our bid shall be valid for a period of . . . . . days from the date fixed for the bid
submission deadline in accordance with the Bidding Documents, and it shall remain
binding upon us and may be accepted at any time before the expiration of that period;
(f) If our bid is accepted, we commit to obtain a performance security in accordance with
the Bidding Documents;
(g) Our firm, including any subcontractors or suppliers for any part of the Contract, have
nationalities from eligible countries [insert the nationality of the Bidder, including that of
all parties that comprise the Bidder if the Bidder is a consortium or association, and the
nationality of each Subcontractor and Supplier];
(h) We, including any subcontractors or suppliers for any part of the contract, do not have
any conflict of interest in accordance with ITB 4.3;
(i) We are not participating, as a Bidder or as a subcontractor, in more than one bid in this
bidding process in accordance with ITB 4.3, other than alternative offers submitted in
accordance with ITB 13;
(j) Our firm, its affiliates or subsidiaries, including any Subcontractors or Suppliers for any
part of the contract, has not been declared ineligible by the Employer, under the
Employers country laws or official regulations or by an act of compliance with a
decision of the United Nations Security Council;
(k) We are not a government owned entity / We are a government owned entity but meet
the requirements of ITB 4.5; *
(l) We have paid, or will pay the following commissions, gratuities, or fees with respect to
the bidding process or execution of the Contract: [If none has been paid or is to be paid, indicate
none.]
(m) We understand that this bid, together with your written acceptance thereof included in
your notification of award, shall constitute a binding contract between us, until a formal
contract is prepared and executed; and
(n) We understand that you are not bound to accept the lowest evaluated bid or any other
bid that you may receive.
(o) We agree to permit the Employer or its representative to inspect our accounts and
records and other documents relating to the bid submission and to have them audited
by auditors appointed by the Employer.
Name .................................................................................................................................................
In the capacity of ...............................................................................................................................
Signed ...............................................................................................................................................
Duly authorized to sign the Bid for and on behalf of .........................................................................
Date .......................................................................................................................................
3
Form of Bid Security
Bank Guarantee
Date: ...............................................................................................................................................................................................................
We have been informed that . . . . . name of the Bidder. . . . . (hereinafter called "the Bidder")
has submitted to you its bid dated . . . . . . . . . (hereinafter called "the Bid") for the execution of
. . . . . . . . name of contract . . . . . . . under Invitation for Bids No. . . . . . . . . . (the IFB).
Furthermore, we understand that, according to your conditions, bids must be supported by a
bid guarantee.
At the request of the Bidder, we . . . . . name of Bank. . . . . hereby irrevocably undertake to pay
you any sum or sums not exceeding in total an amount of . . . . . . . . . .amount in figures . . . . . .
. . . (. . . . . . .amount in words . . . . . . . ) upon receipt by us of your first demand in writing
accompanied by a written statement stating that the Bidder is in breach of its obligation(s)
under the bid conditions, because the Bidder:
(a) has withdrawn its Bid during the period of bid validity specified by the Bidder in the Form
of Bid; or
(b) does not accept the correction of errors in accordance with the Instructions to Bidders
(hereinafter the ITB); or
(c) having been notified of the acceptance of its Bid by the Employer during the period of
bid validity, (i) fails or refuses to execute the Contract Agreement, or (ii) fails or refuses
to furnish the performance security, in accordance with the ITB.
This guarantee will expire: (a) if the Bidder is the successful Bidder, upon our receipt of copies
of the Contract Agreement signed by the Bidder and the performance security issued to you
upon the instruction of the Bidder; and (b) if the Bidder is not the successful Bidder, upon the
earlier of (i) our receipt of a copy your notification to the Bidder of the name of the successful
Bidder; or (ii) twenty-eight days after the expiration of the Bidders bid.
Consequently, any demand for payment under this guarantee must be received by us at the
office on or before that date.
This guarantee is subject to the Uniform Rules for Demand Guarantees (URDG) 2010
Revision, ICC Publication No. 758, except that the supporting statement under Article 15(a) is
hereby excluded.
. . . . . . . . . . . .Banks seal and authorized signature(s) . . . . . . . . . .
Note: All italicized text is for use in preparing this form and shall be deleted from the final product
Date: ...............................................................................................................................................................................................................
We have been informed that . . . . . name of the Bidder. . . . . (hereinafter called "the Bidder")
has submitted to you its bid dated . . . . . . . . . (hereinafter called "the Bid") for the execution of
. . . . . . . . name of contract . . . . . . . under Invitation for Bids No. . . . . . . . . . (the IFB).
Furthermore, we understand that, according to your conditions, bids must be supported by a
bid guarantee.
At the request of the Bidder, we . . . . . name of Bank. . . . . hereby irrevocably undertake to pay
you any sum or sums not exceeding in total an amount of . . . . . . . . . .amount in figures . . . . . .
. . . (. . . . . . .amount in words . . . . . . . ) upon receipt by us of your first demand in writing
accompanied by a written statement stating that the Bidder is in breach of its obligation(s)
under the bid conditions, because the Bidder:
(a) has withdrawn its Bid during the period of bid validity specified by the Bidder in the Form
of Bid; or
(b) does not accept the correction of errors in accordance with the Instructions to Bidders
(hereinafter the ITB); or
(c) having been notified of the acceptance of its Bid by the Employer during the period of
bid validity, (i) fails or refuses to execute the Contract Agreement, or (ii) fails or refuses
to furnish the performance security, in accordance with the ITB.
This guarantee will expire: (a) if the Bidder is the successful Bidder, upon our receipt of copies
of the Contract Agreement signed by the Bidder and the performance security issued to you
upon the instruction of the Bidder; and (b) if the Bidder is not the successful Bidder, upon the
earlier of (i) our receipt of a copy your notification to the Bidder of the name of the successful
Bidder; or (ii) twenty-eight days after the expiration of the Bidders bid.
Consequently, any demand for payment under this guarantee must be received by us at the
office on or before that date.
With reference to Clause 1832 of the Indonesian Civil Law (Kitab Undang-Undang Hukum
Perdata) herewith we reaffirm that the Guarantor shall relinquish the special rights of claim on
assets belonging to the Principal and for seizure and sale of such assets for the discharge of
his debts as required in Clause 1831 of the Indonesian Civil Law.
. . . . . . . . . . . .Banks seal and authorized signature(s) . . . . . . . . . .
Note: All italicized text is for use in preparing this form and shall be deleted from the final product
5
Bill of Quantities
Preamble
1. The Bill of Quantities shall be read in conjunction with the Instructions to Bidders, General
and Particular Conditions of Contract, Technical Specifications, and Drawings
2. The quantities given in the Bill of Quantities are estimated and provisional, and are
given to provide a common basis for bidding. The basis of payment will be the actual
quantities of work ordered and carried out, as measured by the Contractor and verified by
the Engineer and valued at the rates and prices bid in the priced Bill of Quantities, where
applicable, and otherwise at such rates and prices as the Engineer may fix within the terms
of the Contract
3. The rates and prices bid in the priced Bill of Quantities shall, except as otherwise provided
under the Contract, include all construction equipment, labor, supervision, materials,
erection, maintenance, insurance, profit, taxes, and duties, together with all general risks,
liabilities, and obligations set out or implied in the Contract
4. A rate or price shall be entered against each item in the priced Bill of Quantities,
ONLY quantities are stated. The cost of Items against which the Contractor has failed to
enter a rate or price shall be deemed to be covered by other rates and prices entered in the
Bill of Quantities
5. The whole cost of complying with the provisions of the Contract shall be included in the
Items provided in the priced Bill of Quantities, and where no Items are provided, the cost
shall be deemed to be distributed among the rates and prices entered for the related Items
of Work
6. General directions and descriptions of work and materials are not necessarily repeated
nor summarized in the Bill of Quantities. References to the relevant sections of the Contract
documentation shall be made before entering prices against each item in the priced Bill of
Quantities
7. The method of measurement of completed work for payment shall be in accordance
with relevant article Measurement and Payment of Technical Specifications.
8. Arithmetic errors will be corrected by the Employer as follows:
(a) if there is a discrepancy between the unit price and the total price that is
obtained by multiplying the unit price and quantity, the unit price shall prevail and the
total price shall be
corrected, unless in the opinion of the Employer there is an obvious misplacement
of the
decimal point in the unit price, in which case the total price as quoted shall govern
and the unit price shall be corrected;
(b) if there is an error in a total corresponding to the addition or subtraction of subtotals,
the subtotals shall prevail and the total shall be corrected; and
(c) if there is a discrepancy between words and figures, the amount in words shall
prevail, unless the amount expressed in words is related to an arithmetic error, in
which case the amount in figures shall prevail subject to (a) and (b) above
Note:
1)
Value Added Tax (PPN) shall be listed in this item only. The unit rates and prices in the bill of quantity shall
not include any PPN
7
Bill of Quantity
Package Number :
Package Name :
Province :
Bidder Name :
QUANTITY
NO. ITEM DESCRIPTION UNIT Unit Price Total Bid
PAKET Unit Price Total Bid Price
(US Price
SARADAN sd (IDR) (US Dollars)
Dollars)* (IDR)
KERTOSONO
a b c d e f g=dxe h=dxf
SECTION 1 GENERAL
SECTION 3 DEMOLITION
9
SECTION 5 STRUCTURE EXCAVATION
SECTION 6 DRAINAGE
SECTION 7 SUBGRADE
SECTION 8 SUB-BASE
11
SECTION 9 PAVEMENTS
13
10.03(16b2) PC-I Girder Nominal Span of 39.0m to 41.0m, Each
H= 2.10m, erected 90.00
10.03(16c1) PC-I Girder Nominal Span of 44.0m to 46.0m, Each
H= 2.10m, furnished 59.00
10.03(16c2) PC-I Girder Nominal Span of 44.0m to 46.0m, Each
H= 2.10m, erected 59.00
10.03(16d1) PC-I Girder Nominal Span of 49.0m to 51.0m, Each
H= 2.10m, furnished 37.00
10.03(16d2) PC-I Girder Nominal Span of 49.0m to 51.0m, Each
H= 2.10m, erected 37.00
10.05(1) Pretensioned Spun Concrete Pile, Furnished, D Linear Meter
= 60cm 85,161.60
10.05(2) Pretensioned Spun Concrete Pile, Driven, D = Linear Meter
60cm 85,161.60
10.05(4) Pretensioned Spun Concrete Pile, Furnished, D Linear Meter
= 50cm 55,161.60
10.05(5) Pretensioned Spun Concrete Pile, Driven, D = Linear Meter
50cm 55,161.60
10.07(5) Cast-in-Place RC Pile D=100cm, with Linear Meter
Ultrasonic Monitoring 1,267.20
Test pile static loading Each
135.00
Bore Pile load test is a static pole Each
2.00
10.10(3a) Expansion Joint Type C-1 (20mm) Linear Meter
1,320.36
10.10(3b) Expansion Joint Type C-1 (50mm) Linear Meter
1,320.36
10.11(14a) Elastomeric Bearing Pad 300 x 300 x 30 Each
(Mov.) 530.00
10.11(15) Elastomeric Bearing Pad 300 x 350 x 36 Each
(Mov.) 380.00
10.11(15a) Elastomeric Bearing Pad 400 x 350 x 39 Each
(Mov.) 314.00
10.11(15b) Elastomeric Bearing Pad 450 x 350 x 39 Each
(Mov.) 122.00
SECTION MISCELLANEOUS
12
15
12.06 (1) Vehicle Guardrail Type A Linear Meter
72,323.45
12.06 (11) Guard Rail End Section Each
86.00
12.06 (12) Chainlink Fence Linear Meter
4,908.00
12.06 (13) Railing Fence Linear Meter
4,908.00
12.07 (1) Regulatory and warning signs type A-1 Each
80.00
12.07 (2) Regulatory and warning signs type A-2 Each
53.00
12.07 (3) Regulatory and warning signs type B-1 Each
6.00
12.07 (4) Regulatory and warning signs type B-2 Each
14.00
12.08 (9) Guide Sign Type B-2 Each
5.00
12.08 (10a) Guide Sign Type C-1 Each
14.00
12.09 (1) Road Marking Type A (General Application) Square Meter
9,050.25
12.09 (3) Road Marking Type B (General Application) Square Meter
3,620.10
12.12 (1) Concrete Curb Type A Linear Meter
7,958.41
12.12 (2) Concrete Curb Type B Linear Meter
1,591.68
12.13 Interlocking Concrete Paving Square Meter
7,958.41
12.19(2) Guide Post, Type B Each
9,408.94
12.19(5) Kilometer Post Each
38.00
12.20(1) ROW fence, Tiype 1 (Concrete Panel) Linear Meter
58,200.00
SECTION UTILITIES
13
17
13.01 (1).22 Cable NYFGBY 4C - 35 mm2 Linear Meter
560.00
13.01 (1).23 Cable NYFGBY 4C - 50 mm2 Linear Meter
520.00
13.01 (1).24 Cable NYFGBY 4C - 70 mm2 Linear Meter
480.00
13.01 (1).26 Cable NYFGBY 4C - 95 mm2 Linear Meter
240.00
13.01 (1).27 Cable NYFGBY 4C - 120 mm2 Linear Meter
250.00
13.01 (1).29 Cable NYFGBY 7C - 2.5 mm2 Linear Meter
250.00
13.01 (1).34 Cable NYY 4C - 35 mm2 Linear Meter
2,400.00
13.01 (1).35 Cable NYY 4C - 50 mm2 Linear Meter
1,700.00
13.01 (1).36 Cable NYY 4C - 70 mm2 Linear Meter
1,560.00
-
13.01 (2) Panel PJU
-
13.01 (2).7 Street Lighting Panel 1A-01, Included Box and Each
Foundation 10.00
-
13.01 (4) Traffic Control Light
-
13.01 (4). 3 Control Panel for Traffic Light Included Each
Foundation and Panel Box 2.00
13.02 (1) Protection of Cable or Duct Cable Track Linear Meter
470.00
13.02 (2) Cable Tray Linear Meter
400.00
13.02 (3) Excavation of Cable or Duct Cable Track Linear Meter
330.00
19
16.01 (2) Staff Housing LS
1.00
16.01 (3) Highway Patrol Office LS
1.00
16.01 (4) Main Pool LS
1.00
16.01 (5) Mosque LS
1.00
16.01 (6) Public Toilet LS
1.00
16.01 (7) Service Station LS
1.00
16.01 (8) Security House LS
1.00
16.01 (9) Generator Set House LS
1.00
16.01 (10) Pump House LS
1.00
16.01 (11) Water Tower and Supply LS
1.00
16.01(1).8 Road Environment and Vehicle Parking LS
1.00
16.01(1).9 House Fire LS
1.00
16.01(1).10 Flag Pole LS
1.00
16.01(1).11 Trash Can LS
1.00
16.01(1).12 Park / Landscape Toll Facilities LS
1.00
21
17.19 Dump Truck 10 Ton Hour
83.14
17.21 Excavator 80-140 HP Hour
52.91
17.22 Generator Set 125KVA Hour
75.58
17.23 Wheel Loader 1.0-1.6 M3 Hour
52.91
17.24 Tandem Roller 8-10 Ton Hour
52.91
17.25 Tire Roller 8-10 Ton Hour
52.91
17.26 Vibratory Roller 5-8 Ton Hour
75.58
17.27 Concrete Vibrator Hour
75.58
17.28 Water Pump 70-100 mm Hour
75.58
17.29 Tamper Hour
83.14
17.31 Welding Machine 300A Hour
52.91
17.33 Pick Hammer 7Kg Hour
113.37
17.37 Concrete Pump Truck 55-60M3/Hr Hour
75.58
17.39 Generator Set 45 KVA Hour
52.91
17.44 Concrete Finisher 3.0-7.5 m Hour
52.91
17.46 Concrete Pump Truck 90-110M3/Hr Hour
52.91
TOTAL PRICE SECTION - 17
*: subject to the Bid Data Sheet - ITB 15.5 and Particular Conditions, Part B : Specific Provisions Sub-Clause 14.
STANDARD FORM
UNIT RATE ANALYSIS
No. DESCRIPTION UNIT QUANTITY UNIT COST UNIT COST AMOUNT AMOUNT
(IDR) (US$) (IDR) (US$)
a b c d e f g=dxe h=dxf
A Man Power :
B Materials :
C Equipment + Fuel :
D Total (A + B + C)
E Overhead ( ... % x D)
F Profit ( ........... % x D)
G Unit Rate = ( D + E + F )
NOTES :
Unit may be based on operating hours for labour and equipment and volume and/or weight measure for materials.
The quantity of unit is the estimated quantity of each component to complete one unit of work of the Item Number. The
Unit Rate given by the Bidder shall have no adjustment, except the provisions of Sub-Clause of 14.5 of the Instruction to
Bidders.
Unit Costs for Equipment are to include for fuel, consumable and operator.
Unit Costs are to include an allowance for all relevant taxes (but excluding PPN payable for the contract) and fees, etc.
The Unit Price given by the Bidder must cover all additional labour, material, equipment or loss which may be required to
complete the works in accordance with Specifications and Drawings.
The Unit Price given by the Bidder is including Overhead cost and Profit
Bidders may adjust this standard form as necessary.
( ................................. )
Signature and Seal
23
4-24 Section 4 - Bidding Forms
2. Handling /
3. Transport to Site /
(Km ..............)
* to be filled in for precast concrete, reinforcing steel, structural steel and any geo-material (such as
geo-textile) only.
( ................................. )
Signature and Seal
Bidders and each partner to a JV should provide information on their current commitments on all
contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for
contracts approaching completion, but for which an unqualified, full completion certificate has yet to be
issued.
Value of Estimated Average Monthly
Employers Outstanding Work Completion Invoicing Over Last Six
No. Name of Contract
Contact Address, Tel, Fax [Current US$ Date Months
Equivalent] (*) [US$/month)] (*)
NOTE :
Bidders shall not submit backup documents for these projects but should be prepared to provide supporting data if requested during
bid evaluation.
(*): The exchange rate to be used for determining the equivalent US$ value shall be the Telegraphic Transfer Selling Rate published
by the Bank of Indonesia 28 days prior to the latest date of bid submission. The exchange rate shall be obtained from the BI website at
the following address: http://www.bi.go.id/web/en/Moneter/Kurs+Bank+Indonesia/Kurs+Transaksi/
25
4-26 Section 4 - Bidding Forms
Financial Resources
Specify proposed sources of financing, such as liquid assets, unencumbered real assets, lines of credit,
and other financial means, net of current commitments, available to meet the total construction cash
flow demands of the subject contract or contracts as indicated in Section 3 (Evaluation and Qualification
Criteria)
Note (*): The exchange rate to be used for determining the equivalent US$ value shall be the Telegraphic Transfer Selling Rate
published by the Bank of Indonesia 28 days prior to the latest date of bid submission. The exchange rate shall be obtained from the BI
website at the following address: http://www.bi.go.id/web/en/Moneter/Kurs+Bank+Indonesia/Kurs+Transaksi/
Technical Proposal
Personnel
Equipment
Site Organization
Method Statement
Mobilization Schedule
Construction Schedule
Others
27
4-28 Section 4 - Bidding Forms
Personnel
Name
2. Title of position*
Name
3. Title of position*
Name
4. Title of position*
Name
Position
Professional qualifications
Address of employer
Fax E-mail
Summarize professional experience in reverse chronological order. Indicate particular technical and
managerial experience relevant to the project.
29
4-30 Section 4 - Bidding Forms
Equipment
The Bidder shall provide adequate information to demonstrate clearly that it has the capability to meet
the requirements for the key equipment listed in Section 3 (Evaluation and Qualification Criteria). A
separate Form shall be prepared for each item of equipment listed, or for alternative equipment
proposed by the Bidder.
Item of Equipment
Address of owner
Fax Telex
Site Organization
31
4-32 Section 4 - Bidding Forms
Method Statement
Mobilization Schedule
33
4-34 Section 4 - Bidding Forms
Construction Schedule
35
4-36 Section 4 - Bidding Forms
Bidder Information
Bidders country of
constitution
Bidders year of
constitution
Bidders authorized
representative
(name, address, telephone
numbers, fax numbers, e-mail
address)
1. In case of single entity, articles of incorporation or constitution of the legal entity named above, in accordance with ITB
4.1 and 4.2.
2. Authorization to represent the firm or JV named in above, in accordance with ITB 20.2.
3. In case of JV, letter of intent to form JV or JV agreement, in accordance with ITB 4.1.
4. In case of a government-owned entity, any additional documents not covered under 1 above required to comply with ITB
4.5.
JV Partners or
Subcontractors legal
name
JV Partners or
Subcontractors country of
constitution
JV Partners or
Subcontractors year of
constitution
JV Partners or
Subcontractors legal
address in country of
constitution
JV Partners or
Subcontractors authorized
representative information
(name, address, telephone
numbers, fax numbers, e-mail
address)
37
4-38 Section 4 - Bidding Forms
Pending Litigation
No pending litigation in accordance with Criteria 2.2 of Section 3 (Evaluation and Qualification Criteria)
Pending litigation in accordance with Criteria 2.2 of Section 3 (Evaluation and Qualification Criteria)
Value of
Pending
Value of Pending
Year Matter in Dispute Claim as a
Claim in US$
Percentage of
Equivalent (*)
Net Worth
Note (*): The exchange rate to be used for determining the equivalent US$ value shall be the Telegraphic Transfer Selling Rate
published by the Bank of Indonesia 28 days prior to the latest date of bid submission. The exchange rate shall be obtained from the
BI website at the following address: http://www.bi.go.id/web/en/Moneter/Kurs+Bank+Indonesia/Kurs+Transaksi/
Year 1: 2009 Year 2: 2010 Year 3: 2011 Year 4: 2012 Year 5: 2013
Total Assets
Total Liabilities
Net Worth
Current Assets
Current Liabilities
Total Revenues
Attached are copies of financial statements (balance sheets including all related notes, and income statements) for the last
five years, as indicated above, complying with the following conditions.
All such documents reflect the financial situation of the Bidder or partner to a JV, and not sister or parent companies.
Historic financial statements must be audited by a certified accountant.
Historic financial statements must be complete, including all notes to the financial statements.
Historic financial statements must correspond to accounting periods already completed and audited (no statements for
partial periods shall be requested or accepted).
Note (*): The exchange rate to be used for determining the equivalent US$ value shall be the Telegraphic Transfer Selling Rate
published by the Bank of Indonesia applicable at the last day of the period reported. The exchange rates shall be obtained from
the BI website at the following address: http://www.bi.go.id/web/en/Moneter/Kurs+Bank+Indonesia/Kurs+Transaksi/
39
4-40 Section 4 - Bidding Forms
The information supplied should be the Annual Turnover of the Bidder or each member of a JV in terms of the
amounts billed to clients for each year for work in progress or completed, converted to US Dollars at the rate of
exchange at the end of the period reported.
Note (*): The exchange rate to be used for determining the equivalent US$ value shall be the Telegraphic Transfer Selling Rate
published by the Bank of Indonesia applicable at the last day of the period reported. The exchange rates shall be obtained from the BI
website at the following address: http://www.bi.go.id/web/en/Moneter/Kurs+Bank+Indonesia/Kurs+Transaksi/
The Works of the Road and Bridge Infrastructure Development Project shall be procured on the basis of
International Competitive Bidding, and limited only for the Bidders from :
- The People Republic of China, and
- The Republic of Indonesia
The Applicants from the Peoples Republic of China should have a recommendation from the Ministry of
Commerce of the Peoples Republic of China and issued by The Economic and Commercial Counsellors
Office, Embassy of the Peoples Republic of China in the Republic of Indonesia.
Section 6 - 3 Drawings
b. Scope of Structures
One interchange, 15 main bridges, 25 overpasses and 22 underpasses with sub-structures
types spun pile and upper structures with pre-stress concrete I girder.
1.1.2.2 & 1.3 Employers name and address Ministry of Public Works and Housing
Directorate General of Highways
Jalan Pattimura No.20
Jakarta Selatan - 12110
1.1.2.4 & 1.3 Engineers name and address The Engineer is the Construction Supervision
Consultant.
Name : .. [insert Team Leader name]
Address: [insert office address]
Phone : . [insert office phone]
1.1.2.11 Banks name Export Import Bank of China (China
Eximbank)
1.1.2.12 Borrowers name The Republic of Indonesia
1.1.3.3 Time for Completion 1,095 days
1.1.3.7 Defects Notification Period 730 days.
1.1.5.6 Sections Not Applicable
1.3 Electronic transmission systems Not Applicable
1.4 Governing Law The law of the Republic of Indonesia.
1.4 Ruling language English
1.4 Language for communications English
2.1 Time for access to the Site When the Performance Security has been
received by the Employer.
3.1(b)(ii) Engineers Duties and Authority Variations resulting in an increase of the
Accepted Contract Amount in excess of null
percent (0%) shall require approval of the
Employer.
6.5 Normal working hours Eight (8) hours
8.7 & 14.15(b) Delay damages for the Works One tenth of one percent (0.10%) of the final
Contract Price per day, in the currencies and
proportions in which the Contract Price is
payable.
8.7 Maximum amount of delay Five percent (5%) of the final Contract Price.
damages
13.5.(b)(ii) Provisional Sums Not Applicable
13.8 Adjustments for Changes in Period n applicable to the adjustment multiplier
Cost; Table(s) of Adjustment Pn: Not Applicable
Data
14.2 Total advance payment Maximum ten percent (10 %) of the Accepted
Contract Amount payable in the currencies and
proportions in which the Accepted Contract
Amount is payable.
14.2(b) Repayment amortization of Fifteen percent (15 %) of total progress
advance payment
14.3 Percentage of Retention Five percent (5 %)
14.3 Limit of Retention Money Five percent (5 %) of the Accepted Contract
Amount
14.5(b)(i) Plant and Materials If Sub-Clause 14.5 applies:
Plant and Materials for payment when shipped
en route to the Site : not applicable.
14.5(c)(i) Plant and Materials for payment when delivered
to the Site : precast concrete, reinforcing
steel, structural steel and any geo-material
(such as geo-textile) only.
14.6 Minimum Amount of Interim One percent (1.00%) of the Accepted Contract
Payment Certificates Amount.
17.6 Maximum total liability of the The product of 1.00 times the Accepted
Contractor to the Employer Contract Amount.
18.1 Periods for submission of
insurance:
a. evidence of insurance. Twenty one (21) days
b. relevant policies Twenty one (21) days
18.2(d) Maximum amount of deductibles Rp.20,000,000,- (twenty million rupiah) per
for insurance of the Employer's occurrence.
risks
18.3 Minimum amount of third party - Bodily injury : Rp. 100,000,000.- (one
insurance hundred million) each person, each
occurrence.
- Bodily injury including death : Rp.
500,000,000.- (five hundred million) each
person, each occurrence.
- Property damage : Rp. 500,000,000.- (five
hundred million) each occurrence
20.2 Date by which the DB shall be 28 days after the Commencement
appointed
20.2 The DB shall be comprised of One sole Member
20.2 List of potential DB sole Name of potential DB sole member :
members Name :
Education :
Address :
Membership of Professional Societies :
20.3 Appointment (if not agreed) to be The appointing entity is Badan Arbitrase
made by Nasional Indonesia (BANI).
20.6 (a) International arbitration shall be Badan Arbitrase Nasional Indonesia (BANI)
administered by under the rules of arbitration of Badan Arbitrase
Nasional Indonesia (BANI).
Part B - Specific Provisions
Sub-Clause 1.1.1 Add Sub-Clause 1.1.1.11 with the following:
The Contract Excessive in comparison with Unit Rate of Owner Estimate is Unit Rate of
evaluated bid which is 10% higher than the Unit Rate of Owner Estimate. These Unit
Rates will not subject to Price Adjustment as specified in Sub-Clause 13.8 of
Conditions of Contract. In addition, these Unit Rates will prevail for original quantities
only, and the Unit Rates for additional quantities will use the negotiated Unit Rate
which not more than 110% Unit Rate of Owner Estimate.
Sub-Clause 2.1 Delete the second paragraph up to end of Sub-Clause 2.1 and replace with the
following:
Right of Access
to the Site If no such time is stated in the Contract Data, the Employer shall give the Contractor
right of access to, and possession of, the Site within such times as required to enable
the Contractor to proceed without disruption in accordance with the programme
submitted under Sub-Clause 8.3 [Programme].
If the Contractor suffers delay and/or incurs Cost as a result of a failure by the
Employer to give any such right or possession within such time, the Contractor shall
give notice to the Employer and shall be entitled subject to Sub-Clause 20.1
[Contractors Claims] to an extension of time for any such delay, if completion is or
will be delayed, under Sub-Clause 8.4 [Extension of Time for Completion]
After receiving this notice, the Employer shall proceed in accordance with Sub-
Clause 3.5 [Determinations] to agree or determine these matters.
However, if and to the extent that the Employers failure was caused by any error or
delay by the Contractor, including an error in, or delay in the submission of, any of
the Contractors Documents, the Contractor shall not be entitled to such extension of
time.
Sub-Clause 3.1 Add the following paragraphs at before the last paragraph of Sub-Clause 3.1:
Engineers Duties (e) determining an extension of time under Sub-Clause 8.4, Extension of Time
and Authority for Completion;
(f) determination of Contractors Claim under Sub-Clause 17.4, Consequences
of Employers Risks;
(g) determination of Contractors Claim under Sub-Clause 13.7, Adjustments for
Changes in Legislation; and
(h) any determination under Sub-Clause 13.8, Adjustments for Changes in Cost.
Sub-Clause 4.1. Add to the end of the Sub-Clause 4.1:
Contractors The Contractor shall prepare and submit one complete set of "As-Built" Documents
General on one master CD and two complete sets of print copies of "As-Built" Documents
Obligation together with the back-up of the quantity calculation to the Engineer within 28 days
after the date of taking over by Employer. These As-Built Documents shall indicate
all approved changes made during construction, superimposed on the original plans /
As-Staked Documents.
The final measured quantities for all pay items shall be included on all "As-Built"
Documents. These "As-Built" Documents shall be prepared continuously as
execution of the Works progresses and shall be submitted to the Engineer for review
as sections or parts of the Project are completed. No Certificate of Completion for a
Sector or the whole of Works shall be issued to the Contractor by the Engineer
without the approved "As-Built" Documents. The preparation of the "As-Built"
Documents shall be at the expense of the Contractor, payment for which is
subsidiary to the pay items of the Contract.
The review and approval by the Engineer or by the Employer of the "As-Built"
Documents does not relieved the Contractor of any responsibility for and/or liabilities
arising out of inaccurate, false or otherwise incorrect "As-Built" Documents prepared
and submitted by the Contractor.
The approved As-Built Documents shall be reproduced by the Contractor in four (4)
hard copies and one (1) soft copies and return the same to the Employer.
Sub-Clause 4.2. The performance security shall be in the form of a Demand Guarantee and in amount
of five (5) percent of Accepted Contract Amount and in the same currency(ies) of the
Performance Accepted Contract Amount. However, if the bid price offered is less than 80% of the
Security Owner Estimate and the evaluated bid price by Employer due to the reasonable bid
price is equal or more than eight (80) percent, the Performance Security shall be in
the amount(s) of five percent (5%) of the Accepted Contract Amount and in the same
currency(ies) of the Accepted Contract Amount.
Sub-Clause 4.4 Delete the Sub-Clause 4.4 (b) and substitute with the following:
(b) the prior consent of the Engineer with agreement from the Employer shall be
obtained to other proposed Subcontractors.
Sub-Clause 4.9. Delete the last paragraph and add the end of Sub-Clause 4.9:
Quality The Quality Assurance system to be utilized throughout the project duration shall be
Assurance as detailed in Sub-Clause 1.40, Quality Management, of the Specifications and shall
be fully implemented with regard to both Quality Control and Quality Assurance as
defined therein. Compliance with the quality assurance system shall not relieve the
Contractor from any of the requirements of the Specifications with regard to testing of
all materials proposed for the works and the Engineers inspection of each stage of
the completed works before covering up and shall not relieve the Contractor of any of
his duties, obligations or responsibilities under the Contract.
Sub-Clause 6.7 Delete the Sub-Clause 6.7. and substitute with the following:
Health and Safety The Contractor shall at all time take all reasonable precautions to maintain the health
and safety of the Contractors Personnel. In collaboration with local health
authorities, the Contractor shall ensure that first aid facilities and sick bay are
available at all times at the Site and shall post in clearly accessible places
information on how to transport injured Personnel to medical facilities including
having a site vehicle available at all times that can be used to transport Personnel to
medical facilities, including the precise location and contact details of such medical
facilities, name and contact details of the site designed accident prevention officer
and that suitable arrangements are made for all necessary welfare and hygiene
requirements and for the prevention of epidemics.
The Contractor shall appoint an accident prevention officer at the Site, responsible
for maintaining safety and protection against accidents. This person shall be qualified
for this responsibility, and shall have the authority to issue instructions and take
protective measures to prevent accidents. Throughout the execution of the Works,
the Contractor shall provide whatever is required by this person to exercise this
responsibility and authority.
The Contractor shall send, to the Engineer, details of any accident as soon as
practicable after its occurrence. The Contractor shall maintain records and make
reports concerning health, safety and welfare of persons, and damage to property, as
the Engineer may reasonably require.
HIV-AIDS prevention. The Contractor shall encourage and allow their Personnel to
attend to HIV-AIDS awareness programme via an approved service provider during
the Contractors work hours. The Employer will appoint an approved service
provider which may be a recognized NGOs or recognized local health department.
Such approved service provider will be paid for by the Employer and will provide
readily available Information, Education and Consultation Communication (IEC)
campaigns, no specific new information will be produced unless instructed by the
Engineer.
Sub-Clause 8.1 Delete the Sub-Clause 8.1.(c) and substitute with the following :
Commencement (c) except if otherwise specified in the Contract Data, effective access to and
of Works possession of the Site partly or fully given to the Contractor together
with such permission(s) under (a) of Sub-Clause 1.13 [Compliance with
Laws] as required for the commencement of the Works.
Sub-Clause 8.3 Delete the first paragraph of Sub-Clause 8.3 and substitute with the following :
Programme The Contractor shall submit a detailed time programme either for the section
which has been acquisited or not yet to the Engineer within 28 days after
receiving the notice under Sub-Clause 8.1 [Commencement of Works]. The
Contractor shall also submit a revised programme whenever the previous
programme is inconsistent with actual progress or with the Contractors
obligations. Each programme shall include:
Sub-Clause 13.2 Add this paragraph to the end of the Sub-Clause 13.2:
Value Engineering Value Engineering Change Proposal will be limited only to structural works.
Sub-Clause 13.5 Add this paragraph before the last paragraph of the Sub-Clause 13.5:
Provisional Sums (c) Relocation and protection of existing utilities and services or other requirements
of the Works.
Sub-Clause 13.8 Delete Sub-Clause 13.8 entirely and replace with the following:
Adjustments for
In this Sub-Clause, table of adjustment data means the completed table of
Changes in Cost
adjustment data for local and foreign currencies included in the Component Cost
Factors for Road and Bridge Works below.
If this Sub-Clause applies, the amounts payable to the Contractor shall be adjusted
for rises or falls in the cost of labour, Goods and other inputs to the Works, by the
addition or deduction of the amounts determined by the formulae prescribed in this
Sub-Clause. To the extent that full compensation for any rise or fall in Costs is not
covered by the provisions of this or other Clauses, the Accepted Contract Amount
shall be deemed to have included amounts to cover the contingency of other rises
and falls in costs.
Price adjustment in accordance with this Sub-Clause should be made only for
Contracts with original time for completion of more than 365 days.
The adjustment to be applied to the amount otherwise payable to the Contractor, as
valued in accordance with the appropriate Schedule and certified in Payment
Certificates, shall be determined from formulae for each of the currencies in which
the Contract Price is payable. No adjustment is to be applied to work valued on the
basis of Cost or current prices. The formulae shall be of the following general type:
For Local Currency Payment :
The amount by which the net value of work certified for payment in any given Monthly
Statement of Account for each of the Cost Element specified this Clause is to be
th
adjusted in accordance with the following formula starting from the 13 (thirteenth)
month from the commencement date:
K = V x [ l(Ln-Lo)/Lo + f(Fn-Fo)/Fo + m1(M1n-M1o)/M1o + m2(M2n-M2o)/M2o +
m3(M3n-M3o)/M3o + e(En-Eo)/Eo]}
where :
K = Adjustment amount for the respective Pay Item.
V = Valuation of work certified for payment as having been completed during the
month under consideration based on the product of the net certified quantity
and the Unit Prices entered in the Bill of Quantities for the Pay Item concerned
but without deduction of any Retention Money and excluding any advances
made for materials on Site.
Ln = General Index for the relevant provincial capital published monthly in the
"Indikator Ekonomi", Table 1.4 General Index, applicable at the time of n.
Lo = Index as defined in Ln above mentioned, but applicable in the 12th (twelfth)
month from the commencement date.
Fn = Price index for high-speed diesel fuel, published yearly in the "Indeks Harga
Perdagangan Besar Indonesia, tem 3.27.5, Solar (high-speed diesel fuel),
applicable at the time of n. Interim data may be obtained directly from
Badan Pusat Statistik (BPS).
Fo = Index as defined in Fn above mentioned, but applicable in the 12th (twelfth)
month from the commencement date.
M1n = Price indices for all kind of quarry and borrow products, published yearly in the
"Indeks Harga Perdagangan Besar Indonesia, applicable at the time of n.
The index sources applicable to each Pay Item are defined by the tables listed
in the Price Index Source for Materials. Interim data may be obtained
directly from Badan Pusat Statistik (BPS).
M1o = Index as defined in M1n above mentioned, but applicable in the 12th (twelfth)
month from the commencement date.
M2n = Price indices for cement, asphalt and all kind of metals, published yearly in the
"Indeks Harga Perdagangan Besar Indonesia applicable at the time of n.
The index sources applicable to each Pay Item are defined by the tables listed
in the Price Index Source for Materials. Interim data may be obtained
directly from Badan Pusat Statistik (BPS).
M2o = Index as defined in M2n above mentioned, but applicable in the 12th (twelfth)
month from the commencement date.
M3n = Price indices for additive, paint, rubber, electrical, steel (when M2 is cement),
etc, published yearly in the "Indeks Harga Perdagangan Besar Indonesia
applicable at the time of n. The index sources applicable to each Pay Item
are defined by the tables listed in the Price Index Source for Materials.
Interim data may be obtained directly from Badan Pusat Statistik (BPS).
M3o = Index as defined in M3n above mentioned, but applicable in the 12th (twelfth)
month from the commencement date.
En = Price indices for equipment, published yearly in "Indeks Harga Perdagangan
Besar Bahan Bangunan/Konstruksi Indonesia, item 22, Machinery and Spare
Parts, applicable at the time of n. Interim data may be obtained directly from
Badan Pusat Statistik (BPS).
Eo = Index as defined in E above mentioned, but applicable in the 12th (twelfth)
month from the commencement date.
n = Current time of the indices, which shall be either those published for the
month in which the work was actually carried out or those indices published
for the month in which that work was scheduled to be carried out, whichever is
the lower. In the event of a revised construction schedule being approved by
Addendum to the contract, the new schedule shall be effective from the month
when the revised schedule agreed by the both parties. The contractual
progress schedule is not necessary the same as any revised programme
prepared to satisfy the requirements of Clause 8.3 of the Conditions of
Contract and shall only include progress schedules approved by formal
Addendum. In the case of Material on Site, the applicable n for the price
indices of material (M) shall be that for the period during which the Material
on Site is certified for payment.
l, f, m1, m2, m3, and e are standard factors stated in the list of component cost factor
hereof for the relative components of (l) labour, (f) fuel and lubricants, (m1) all kind of
quarry and borrow materials, (m2) manufactured material, (m3) specific manufactured
material and (e) equipment. In all cases l + f + m1 + m2 + m3 + e = 0.85 where a =
0.15 is nonadjustable element.
The cost indices or reference prices stated in the table of adjustment data shall be
used. If their source is in doubt, it shall be determined by the Engineer.
Until such time as each current cost index is available, the Engineer shall determine
a provisional index for the issue of Interim Payment Certificates. When a current cost
index is available, the adjustment shall be recalculated accordingly.
For foreign currency payment there shall be no price adjustment.
Sub-Clause 14.1 Delete the Sub-Clause 14.1(e) and substitute with the following:
The Contract Notwithstanding the provisions of subparagraph (b), Contractor's Equipment,
Price including essential spare parts therefore, imported by the Contractor for the sole
purpose of executing the Contract shall be temporarily exempt from the payment of
import duties and taxes upon initial importation, provided the Contractor shall post
with the customs authorities at the port of entry an approved export bond or bank
guarantee, valid until the Time for Completion plus six months, in an amount equal to
the full import duties and taxes which would be payable on the assessed imported
value of such Contractor's Equipment and spare parts, and callable in the event the
Contractor's Equipment is not exported from the Country on completion of the
Contract. A copy of the bond or bank guarantee endorsed by the customs authorities
shall be provided by the Contractor to the Employer upon the importation of individual
items of Contractor's Equipment and spare parts. Upon export of individual items of
Contractor's Equipment or spare parts, or upon the completion of the Contract, the
Contractor shall prepare, for approval by the customs authorities, an assessment of
the residual value of the Contractor's Equipment and spare part to be exported,
based on the depreciation scale(s) and other criteria used by the customs authorities
for such purposes under the provisions of the applicable Laws. Import duties and
taxes shall be due and payable to the customs authorities by the Contractor on (a)
the difference between the initial imported value and the residual value of the
Contractor's Equipment and spare parts to exported; and (b) on the initial imported
value that Contractor's Equipment and spare parts remaining in the Country after
completion of the Contract. Upon payment of such dues within 28 days of being
invoiced, the bond or bank guarantee shall be reduced or released accordingly;
otherwise the security shall be called in the full amount remaining.
Sub-Clause 14.2 Deleted the word 90 percent (90%) in second last paragraph (b) with the word 100
percent (100%)
Advance Payment
Sub-Clause 14.8 Delete the second paragraph of this Sub-Clause 14.8 and substitute with the
following :
Delayed Payment
These financing charges shall be calculated for IDR portion at the applicable current
BI rate plus three percent (3%) of the Central Bank of Republic of Indonesia (Bank
Indonesia) in Indonesian Rupiah published by Bank of Indonesia at :
http://www.bi.go.id/Web/EN/Indikator+Moneter+dan+Perbankan/birate or through the
banks home page at http://www.bi.go.id
Financing charges for Foreign Currency(ies) shall be calculated at LIBOR rate plus
three (3) percent.
Sub-Clause 15.2 Add the following at the end of Sub Clause 15.2 (b) :
Termination by Or fails to catch up the target of progress within the given time in the Third Show
Employer Cause Meeting as specified in the Sub-Clause 8.6 [Rate of Progress].
Add the following paragraph to Sub Clause 15.2 :
(g) is behind schedule such that the Delay Damages would exceed the maximum
amount of Delay Damages stated in Contract Data Sub-Clause 8.7.
Delete the second last paragraph of Sub-Clause 15.2 and replace with the
following:
After termination, the Employer may encash the full amount of the Performance
Security and complete the Works and/or arrange for any other entities to do so. The
Employer and these entities may then use any Goods, Contractors Documents and
other design documents made by or on behalf of the Contractor.
COMPONENT COST FACTORS FOR ROAD AND BRIDGE WORKS
Tanaman Perkebunan
2 (Agri) Stabilization by Vegetation, Shrubs, and Trees
Estate Crops
Table of Forms
Letter of Acceptance
[on letterhead paper of the Employer]
. . . . . . . date. . . . . . .
This is to notify you that your Bid dated . . . . date . . . . for execution of the . . . . . . . . . .name of the
contract and identification number, as given in the Contract Data . . . . . . . . . . for the Accepted Contract
Amount of the equivalent of . . . . . . . . .amount in numbers and words and name of currency . . . . . . . . ., as
corrected and modified in accordance with the Instructions to Bidders is hereby accepted by our
Agency.
You are requested to furnish the Performance Security within 28 days in accordance with the
Conditions of Contract, using for that purpose the of the Performance Security Form included in
Section 9 (Contract Forms) of the Bidding Document.
Contract Agreement
This Contract Agreement (hereinafter together with all appendices attached hereto and forming an
integral part hereof, called the AGREEMENT) dated ., 2011
Between
THE GOVERNMENT OF THE REPUBLIC OF INDONESIA (herein after called the EMPLOYER) as
represented by
Name : ............................................................................................................................................
Title : Sub Project Manager (PPK) of Road and Bridge Improvement Development Project
..........................................................
Address : ............................................................................................................................................
Being authorized to act for and on behalf of the Directorate General of Highway, Ministry of Public
Works and Housing, Government of the Republic of Indonesia, in accordance with the Decree of the
Minister of Public Works, No .............................., dated ........................(hereinafter referred to as
EMPLOYER)
and
Name : ....................................................................................................................................
Title : J.O. Representative of .............................................................................................
Address : ....................................................................................................................................
NOW THEREFORE, it is hereby agreed by and between the parties hereto as follows:
1. In this Agreement, words and expressions shall have the same meanings as are respectively
assigned to them in the Contract documents hereinafter referred to.
2. The Contractor should execute and complete the Works and the remedying of any defects
therein, namely :
ROAD AND BRIDGE INFRASTRUCTURE DEVELOPMENT PROJECT (RBIDP)
CHINA EXIMBANK LOAN NO. ..
PACKAGE NO. : ..........................................................................................................
PACKAGE NAME : ..........................................................................................................
In accordance with this Agreement and the Contract Document as hereinafter defined. The time
for completion from the Commencement Date shall be ............................ (...) calendar days,
and Defects Notification Period shall be one thousand ninety five (1095) calendar days.
3. The following Documents shall be deemed to from and be read and construed as part of this
Agreement with the following sequence:
a. This Contract Agreement,
b. The Letter of Acceptance,
c. The Letter of Bid
d. The Addenda Nos ......... (if any)
e. The Particular Conditions
f. The General Conditions
g. The Specifications
h. The Drawings
i. The Priced of Bill of Quantities, and
j. Any other documents forming part of the contract.
4. The Terms, conditions and requirements of the Contract Documents shall prevail except any
which are expressly modified or altered by this Agreement.
7. The Contract Price including the Value Added Tax (VAT) obtained from the price and the estimated
quantities of work as indicated in the Bill of Quantities, subject to such additions thereto or
deductions there from as may be made under the provisions of the Contract is Rp. ........................
(................................................................................................) and US$ ....................................
(................................................................................................)
8. The Contractor has the right to apply for advance payment to a maximum of 10 % (ten percent) of
the Accepted Contract Amount, after Advance Payment Security has been submitted by the
Contractor.
9. This Contract Agreement shall be in force on the date that it is executed between the parties
subject to the provisions that the Contract Agreement shall become effective only upon the
approval by the competent authorities of the Government and Financing Agency. The Notice to
Proceed will be issued only after the Contract Agreement has become effective. The Time for
Completion of the whole of the Works shall commence from Commencement Date.
10. a. For this Contract Agreement the English version shall govern.
Where there is any discrepancy between the Contract Documents, they shall govern each
other in the order prescribed in Article 3 hereof and each in their turn shall govern.
b. For the purpose of this Contract Agreement, the Parties agree to waive Clause 1266 of the
Indonesian Civil Law (Kitab Undang-Undang Hukum Perdata).
12. Except as otherwise provided for in this Contract Agreement it is agreed between the parties
that the address to which certificates, notices, orders and requests for the respective parties
shall be delivered are :
For the Employer :
Sub Project Manager (PPK) of , . Province, Directorate General of
Highways, Ministry of Public Works and Housing, Government of the Republic of Indonesia.
Address : ..
Telephone : ..
IN WITNESS WHEREOF, the parties here to have caused this Agreement to be executed with the
laws of the Republic of Indonesia in their respective names and delivered at the principal office of
the Employer as of the day and year first herein above written.
For and on behalf of the CONTRACTOR For and on behalf the EMPLOYER
.............................................................. Government of the Republic of Indonesia
Sub Project Manager (PPK) of ..
Province
_______________________
J.O. Representative NIP : .
Seen by :
. .
NIP : .
Bank Guarantee
We have been informed that . . . . . name of the Contractor. . . . . (hereinafter called "the Contractor")
has entered into Contract No. . . . . . reference number of the Contract. . . . . dated . . . . . . . .with you,
for the execution of . . . . . . name of contract and brief description of Works. . . . . (hereinafter called "the
Contract").
Furthermore, we understand that, according to the conditions of the Contract, a performance
guarantee is required.
At the request of the Contractor, we . . . . . name of the Bank. . . . . hereby irrevocably undertake to pay
you any sum or sums not exceeding in total an amount of . . . . . name of the currency and amount in
figures*. . . . . . (. . . . . amount in words. . . . . ) such sum being payable in the types and proportions of
currencies in which the Contract Price is payable, upon receipt by us of your first demand in writing
accompanied by a written statement stating that the Contractor is in breach of its obligation(s) under
the Contract, without your needing to prove or to show grounds for your demand or the sum specified
therein.
This guarantee shall expire, no later than the . . . . . Day of . . . . . . . . . . , . . . . . . **, and any demand
for payment under it must be received by us at this office on or before that date.
This guarantee is subject to the Uniform Rules for Demand Guarantees (URDG) 2010 Revision, ICC
Publication No. 758, except that the supporting statement under Article 15(a) is hereby excluded.
............................
Seal of Bank and Signature(s)
Note: All italicized text is for guidance on how to prepare this demand guarantee and shall be deleted from the
final document.
* The Guarantor shall insert an amount representing the percentage of the Contract Price specified in the
Contract and denominated either in the currency(ies) of the Contract or a freely convertible currency acceptable
to the Employer.
** Insert the date twenty-eight days after the expected defect notification date. The Employer should note
that in the event of an extension of the time for completion of the Contract, the Employer would need to request
an extension of this guarantee from the Guarantor. Such request must be in writing and must be made prior to
the expiration date established in the guarantee. In preparing this guarantee, the Employer might consider
adding the following text to the form, at the end of the penultimate paragraph: The Guarantor agrees to a
one-time extension of this guarantee for a period not to exceed [six months][one year], in response to the
Employers written request for such extension, such request to be presented to the Guarantor before the expiry
of the guarantee.
Performance Security
Bank Guarantee
We have been informed that . . . . . name of the Contractor. . . . . (hereinafter called "the Contractor")
has entered into Contract No. . . . . . reference number of the Contract. . . . . dated . . . . . . . .with you,
for the execution of . . . . . . name of contract and brief description of Works. . . . . (hereinafter called "the
Contract").
Furthermore, we understand that, according to the conditions of the Contract, a performance
guarantee is required.
At the request of the Contractor, we . . . . . name of the Bank. . . . . hereby irrevocably undertake to pay
you any sum or sums not exceeding in total an amount of . . . . . name of the currency and amount in
figures*. . . . . . (. . . . . amount in words. . . . . ) such sum being payable in the types and proportions of
currencies in which the Contract Price is payable, upon receipt by us of your first demand in writing
accompanied by a written statement stating that the Contractor is in breach of its obligation(s) under
the Contract, without your needing to prove or to show grounds for your demand or the sum specified
therein.
This guarantee shall expire, no later than the . . . . . Day of . . . . . . . . . . , . . . . . . **, and any demand
for payment under it must be received by us at this office on or before that date.
With reference to Clause 1832 of the Indonesian Civil Law (Kitab Undang-Undang Hukum Perdata)
herewith we reaffirm that the Guarantor shall relinquish the special rights of claim on assets belonging
to the Principal and for seizure and sale of such assets for the discharge of his debts as required in
Clause 1831 of the Indonesian Civil Law.
............................
Seal of Bank and Signature(s)
Note: All italicized text is for guidance on how to prepare this demand guarantee and shall be deleted from the
final document.
* The Guarantor shall insert an amount representing the percentage of the Contract Price specified in the
Contract and denominated either in the currency(ies) of the Contract or a freely convertible currency acceptable
to the Employer.
** Insert the date twenty-eight days after the expected defect notification date. The Employer should note
that in the event of an extension of the time for completion of the Contract, the Employer would need to request
an extension of this guarantee from the Guarantor. Such request must be in writing and must be made prior to
the expiration date established in the guarantee. In preparing this guarantee, the Employer might consider
adding the following text to the form, at the end of the penultimate paragraph: The Guarantor agrees to a
one-time extension of this guarantee for a period not to exceed [six months][one year], in response to the
Employers written request for such extension, such request to be presented to the Guarantor before the expiry
of the guarantee.
The maximum amount of this guarantee shall be progressively reduced by the amount of the advance
payment repaid by the Contractor as indicated in copies of interim statements or payment certificates
which shall be presented to us. This guarantee shall expire, at the latest, upon our receipt of a copy
of the interim payment certificate indicating that eighty (80) percent of the Contract Price has been
certified for payment, or on the . . . day of . . . . . . . , . . . . . **, whichever is earlier. Consequently, any
demand for payment under this guarantee must be received by us at this office on or before that
date..
This guarantee is subject to the Uniform Rules for Demand Guarantees (URDG) 2010 Revision, ICC
Publication No. 758, except that the supporting statement under Article 15(a) is hereby excluded.
............................
Seal of Bank and Signature(s)
Note: All italicized text is for guidance on how to prepare this demand guarantee and shall be deleted from the
final document.
* The Guarantor shall insert an amount representing the amount of the advance payment denominated either in
the currency(ies) of the advance payment as specified in the Contract, or in a freely convertible currency
acceptable to the Employer.
** Insert the expected expiration date of the Time for Completion. The Employer should note that in the event
of an extension of the time for completion of the Contract, the Employer would need to request an extension of
this guarantee from the Guarantor. Such request must be in writing and must be made prior to the expiration
date established in the guarantee. In preparing this guarantee, the Employer might consider adding the following
text to the form, at the end of the penultimate paragraph: The Guarantor agrees to a one-time extension of
this guarantee for a period not to exceed [six months][one year], in response to the Employers written request
for such extension, such request to be presented to the Guarantor before the expiry of the guarantee.
The maximum amount of this guarantee shall be progressively reduced by the amount of the advance
payment repaid by the Contractor as indicated in copies of interim statements or payment certificates
which shall be presented to us. This guarantee shall expire, at the latest, upon our receipt of a copy
of the interim payment certificate indicating that eighty (80) percent of the Contract Price has been
certified for payment, or on the . . . day of . . . . . . . , . . . . . **, whichever is earlier. Consequently, any
demand for payment under this guarantee must be received by us at this office on or before that
date..
With reference to Clause 1832 of the Indonesian Civil Law (Kitab Undang-Undang Hukum Perdata)
herewith we reaffirm that the Guarantor shall relinquish the special rights of claim on assets belonging
to the Principal and for seizure and sale of such assets for the discharge of his debts as required in
Clause 1831 of the Indonesian Civil Law.
............................
Seal of Bank and Signature(s)
Note: All italicized text is for guidance on how to prepare this demand guarantee and shall be deleted from the
final document.
* The Guarantor shall insert an amount representing the amount of the advance payment denominated either in
the currency(ies) of the advance payment as specified in the Contract, or in a freely convertible currency
acceptable to the Employer.
** Insert the expected expiration date of the Time for Completion. The Employer should note that in the event
of an extension of the time for completion of the Contract, the Employer would need to request an extension of
this guarantee from the Guarantor. Such request must be in writing and must be made prior to the expiration
date established in the guarantee. In preparing this guarantee, the Employer might consider adding the following
text to the form, at the end of the penultimate paragraph: The Guarantor agrees to a one-time extension of
this guarantee for a period not to exceed [six months][one year], in response to the Employers written request
for such extension, such request to be presented to the Guarantor before the expiry of the guarantee.
1. Land Acquisition
.
All will be provided separately
SECTION 3 DEMOLITION
4.03 (1) Common Excavation for Embankment M3 0.032 0.327 - - - 0.491 0.850
4.03 (2) Common Excavation for Filling Material in Median M3 0.032 0.327 - - - 0.491 0.850
4.03 (3) Common Excavation as Waste Material M3 0.014 0.348 - - - 0.488 0.850
4.03 (4) Soft Rock Excavation as Waste Material M3 0.146 0.273 - - - 0.431 0.850
4.04 Rock Excavation M3 0.057 0.317 - - - 0.476 0.850
4.05 (1) Common Borrow Material M3 0.014 0.222 0.302 - - 0.312 0.850
4.05 (2) Selected Borrow Material M3 0.014 0.222 0.302 - - 0.312 0.850
4.08 Free-Draining Material M3 0.046 0.273 0.419 0.112 0.850
4.09 Granular Backfill M3 0.046 0.273 0.419 0.112 0.850
4.10 Permeable Backfill M3 0.046 0.273 0.419 0.112 0.850
4.11 (1) Vertical Sand Drains (40 cm diameter) M 0.046 0.273 0.419 0.112 0.850
4.11 (2) Horizontal Sand Drain M3 0.046 0.273 0.419 0.112 0.850
4.12 (1) Geotextile for Subsurface Drainage (Class 2) M2 0.017 - 0.816 - - 0.017 0.850
4.12 (2) Geotextile for Separator (Class 1) M2 0.017 - 0.816 - - 0.017 0.850
4.12 (3) Geotextile for Separator (Class 2) M2 0.017 - 0.816 - - 0.017 0.850
4.12 (4) Geotextile for Separator (Class 3) M2 0.017 - 0.816 - - 0.017 0.850
4.12 (5) Geotextile for Stabilizer (Class 1) M2 0.017 - 0.816 - - 0.017 0.850
NO. COST COMPONENT FACTORS
PAY PAY ITEM UNIT Labour Fuel Material Equipment TOTAL
ITEM l f m1 m2 m3 e
5.01 (1) Structure Excavation 0 2 meter depth M3 0.028 0.328 - - - 0.494 0.850
5.01 (2) Structure Excavation 2 4 meter depth M3 0.028 0.328 - - - 0.494 0.850
5.01 (3) Structure Excavation 4 6 meter depth M3 0.028 0.328 - - - 0.494 0.850
5.01 (4) Addition to the prices of Items Nos.5.01 (1) through 5.01 (3) for Structure M3 0.051 0.234 - - - 0.565 0.850
Excavation where water is present
5.01 (5) Addition to the prices of Items Nos.5.01 (1) through 5.01 (3) for Excavation in Rock M3 0.051 0.234 - - - 0.565 0.850
SECTION 6 DRAINAGE
6.05 (1) Unreinforced Concrete Pipe 40 cm M 0.004 0.013 0.231 0.582 - 0.020 0.850
6.05 (2) RC Spun Pipe Type A 40 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (3) RC Spun Pipe Type B 40 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (4) RC Spun Pipe Type A 60 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (5) RC Spun Pipe Type B 60 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (6) RC Spun Pipe Type A 80 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (7) RC Spun Pipe Type B 80 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (8) RC Spun Pipe Type A 100 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (9) RC Spun Pipe Type B 100 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (10) RC Spun Pipe Type A 120 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (11) RC Spun Pipe Type B 120 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (12) RC Spun Pipe Type C2 40 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (13) RC Spun Pipe Type D2 40 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (14) RC Spun Pipe Type C2 60 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (15) RC Spun Pipe Type D2 60 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (16) RC Spun Pipe Type C2 80 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (17) RC Spun Pipe Type D2 80 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (18) RC Spun Pipe Type C2 100 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (19) RC Spun Pipe Type D2 100 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (20) RC Spun Pipe Type C2 120 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.05 (21) RC Spun Pipe Type D2 120 cm M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (1) U-Ditch, DS-1 M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (1a) U-Ditch, DS-1a M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (2) U-Ditch, DS-2 M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (2a) U-Ditch, DS-2a M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (2b) U-Ditch, DS-2G M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (3) U-Ditch, DS-3 M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (3a) U-Ditch, DS-3a M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (3b) U-Ditch, DS-3b M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (3c) U-Ditch, DS-3c M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (4) U-Ditch, DS-4 M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (5) U-Ditch, DS-5 M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (6) U-Ditch, DS-6 M 0.004 0.013 0.022 0.791 - 0.020 0.850
NO. COST COMPONENT FACTORS
PAY PAY ITEM UNIT Labour Fuel Material Equipment TOTAL
ITEM l f m1 m2 m3 e
6.06 (6b) U-Ditch, DS-6b M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (7) U-Ditch, DS-7 M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (7a) U-Ditch, DS-7a M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (8) U-Ditch, DS-8 M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (9) U-Ditch, DS-9 M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (10) U-Ditch, DS-10 M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (11) U-Ditch, DS-11 M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (12) U-Ditch, DS-12 M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (13) U-Ditch, DS-13 M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (14) Catchbasin, DC-1 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (15) Catchbasin, DC-2 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (16) Catchbasin, DC-3 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (17) Catchbasin, DC-4 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (18) Catchbasin, DC-5 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (19) Catchbasin, DC-6 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (20) Catchbasin, DC-7 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (21) Catchbasin, DC-8 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (22) Precast U-Ditch, DP-1 M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (23) Precast U-Ditch, DP-2 M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (24) Precast U-Ditch, DP-3 M 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (25) Inlet Drain, Type DI-1 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (26) Inlet Drain, Type DI-2 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (27) Inlet Drain, Type DI-3 (MH-1) Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (28) Inlet Drain, Type DI-4 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (29) Outlet Drain, Type DO-1 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (30) Outlet Drain, Type DO-2 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (31) Outlet Drain, Type DO-3 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (32) Outlet Drain, Type DO-4 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (33) Outlet Drain, Type DO-5 Buah 0.004 0.013 0.022 0.791 - 0.020 0.850
6.06 (34) Inlet-Outlet (Mortared Rubble) M3 0.038 0.010 0.329 0.458 - 0.015 0.850
6.06 (35) DV-10 (Mortared Rubble) M3 0.038 0.010 0.329 0.458 - 0.015 0.850
6.06 (36) DS-2 (Mortared Rubble) M3 0.038 0.010 0.329 0.458 - 0.015 0.850
6.06 (37) DS-4 (Mortared Rubble) M3 0.038 0.010 0.329 0.458 - 0.015 0.850
6.06 (38) DS-5 (Mortared Rubble) M3 0.038 0.010 0.329 0.458 - 0.015 0.850
6.07 (1) Porous Drainage or Filter Material M3 0.006 0.006 0.727 0.092 - 0.019 0.850
6.07 (2) Plastic Filter Fabric M2 0.017 - 0.816 - - 0.017 0.850
6.07 (3a) Perforated Pipe for Subsurface Drainage Works, Dia.4 inch M 0.003 0.008 0.827 - - 0.012 0.850
6.07 (3b) Perforated Pipe for Subsurface Drainage Works, Dia.5 inch M 0.003 0.008 0.827 - - 0.012 0.850
6.07 (3c) Perforated Pipe for Subsurface Drainage Works, Dia.6 inch M 0.003 0.008 0.827 - - 0.012 0.850
6.07 (3d) Perforated Pipe for Subsurface Drainage Works, Dia.8 inch M 0.003 0.008 0.827 - - 0.012 0.850
NO. COST COMPONENT FACTORS
PAY PAY ITEM UNIT Labour Fuel Material Equipment TOTAL
ITEM l f m1 m2 m3 e
SECTION 7 SUBGRADE
8.01 (1) Aggregate Base Class A M3 0.042 0.117 0.515 - - 0.176 0.850
8.01 (2) Aggregate Base Class B M3 0.042 0.117 0.515 - - 0.176 0.850
SECTION 9 PAVEMENTS
9.07 (1) Asphalt Concrete - Base Ton 0.006 0.110 0.198 0.386 - 0.150 0.850
9.07 (2) Asphalt Concrete - Binder Course Ton 0.006 0.110 0.198 0.386 - 0.150 0.850
9.07 (3) Asphalt Concrete - Wearing Course Ton 0.006 0.110 0.198 0.386 - 0.150 0.850
9.07 (4) Asphalt Cement Ton 0.006 0.110 0.198 0.386 - 0.150 0.850
9.07 (5) Anti Stripping Agent Kilogram - - - 0.850 - - 0.850
9.08 (1) Concrete Pavement M3 0.028 0.357 0.289 0.158 - 0.018 0.850
9.08 (2) Concrete Pavement, Double Wire Mesh M3 0.028 0.357 0.289 0.158 - 0.018 0.850
9.08 (3) Concrete Pavement, Single Wire Mesh M3 0.028 0.357 0.289 0.158 - 0.018 0.850
9.09 Wet Lean Concrete M3 0.055 0.016 0.208 0.548 - 0.023 0.850
10.01 (1) Structural Concrete Class A-1 (PC Box Girders) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (2) Structural Concrete Class A-2-1 (PC T Girders) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (3) Structural Concrete Class A-2-2 (PC Pier Heads of Y-Type Piers) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (3a) Structural Concrete Class A-2-3 (PC Pier Heads of T-Type Piers) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (3b) Structural Concrete Class A-2-4 (PC Pier Heads of Portal Piers) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (3c) Structural Concrete Class A-2-5 (PC Pier Heads) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (4a) Structural Concrete Class B-1-1a (RC Deck Slabs of PCU/PCI-Girders) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (4b) Structural Concrete Class B-1-1b (RC Deck Slabs of Steel Box Girders) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (5) Structural Concrete Class B-1-2 (Diaphragms of PCU/PCIGirders) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (5a) Structural Concrete Class B-1-3 (RC Pier Heads) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (6) Filling Concrete Class B of PC-Void M3 0.036 0.013 0.196 0.586 - 0.019 0.850
NO. COST COMPONENT FACTORS
PAY PAY ITEM UNIT Labour Fuel Material Equipment TOTAL
ITEM l f m1 m2 m3 e
10.01 (7a) Structural Concrete Class B-1-4a (RC Columns of Wall-Type Piers) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (7b) Structural Concrete Class B-1-4b (RC Columns of Y-Type Piers) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (7c) Structural Concrete Class B-1-4c (RC Columns of T-Type Piers) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (7d) Structural Concrete Class B-1-4d (RC Columns of Portal Piers) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (7e) Structural Concrete Class B-1-4e (RC Columns of Piers of Ramps) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (7f) Structural Concrete Class B-1-4f (RC Columns of Piers) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (8) Structural Concrete Class B-1-5 (RC Piled Slabs) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (9) Structural Concrete Class B (Concrete Barriers) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (10) Structural Concrete Class C-1 (Abutments, Pier Footings, Retaining Walls, Approach M3 0.036 0.013 0.196 0.586 - 0.019 0.850
Slabs, Planting Box)
10.01 (11) Structural Concrete Class C-2 (Box Culverts) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (12) Structural Concrete Class C-3 (Curbs) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (13) Structural Concrete Class C-4 (Precast Plates for Slabs) M3 0.036 0.013 0.196 0.586 - 0.019 0.850
10.01 (14) Structural Concrete Class D M3 0.036 0.013 0.336 0.446 - 0.019 0.850
10.01 (15) Structural Concrete Class E M3 0.036 0.013 0.336 0.446 - 0.019 0.850
10.01 (16) Cut Off Plate for Water Stop M -
10.02 (1) Reinforcing Steel Plain Bars BJTP-24 Kilogram 0.056 0.013 - 0.760 - 0.021 0.850
10.02 (2) Reinforcing Steel Deformed Bars BJTD-40 Kilogram 0.056 0.013 - 0.760 - 0.021 0.850
10.03 (1a) PC-U Girder Nominal Span of 35.5m, H= 1.95m (Type RB), furnished Buah 0.004 0.002 - 0.841 - 0.003 0.850
10.03 (1b) PC-U Girder Nominal Span of 35.5m, H= 1.95m (Type RB), erected Buah 0.157 0.236 - - - 0.457 0.850
10.03 (2a) PC-U Girder Nominal Span of 31.3m, H= 1.95m (Type RC), furnished Buah 0.004 0.002 - 0.841 - 0.003 0.850
10.03 (2b) PC-U Girder Nominal Span of 31.3m, H= 1.95m (Type RC), erected Buah 0.157 0.236 - - - 0.457 0.850
10.03 (3a) PC-U Girder Nominal Span of 26.5m, H= 1.95m (Type RD), furnished Buah 0.004 0.002 - 0.841 - 0.003 0.850
10.03 (3b) PC-U Girder Nominal Span of 26.5m, H= 1.95m (Type RD), erected Buah 0.157 0.236 - - - 0.457 0.850
10.03 (4a) PC-U Girder Nominal Span of 18.5m, H= 1.85m (Type A), furnished Buah 0.004 0.002 - 0.841 - 0.003 0.850
10.03 (4b) PC-U Girder Nominal Span of 18.5m, H= 1.85m (Type A), erected Buah 0.157 0.236 - - - 0.457 0.850
10.03 (5a) PC-U Girder Nominal Span of 23m, H= 1.85m (Type B), furnished Buah 0.004 0.002 - 0.841 - 0.003 0.850
10.03 (5b) PC-U Girder Nominal Span of 23m, H= 1.85m (Type B), erected Buah 0.157 0.236 - - - 0.457 0.850
10.03 (6a) PC-U Girder Nominal Span of 26m, H= 1.85m (Type C), furnished Buah 0.004 0.002 - 0.841 - 0.003 0.850
10.03 (6b) PC-U Girder Nominal Span of 26m, H= 1.85m (Type C), erected Buah 0.157 0.236 - - - 0.457 0.850
10.03 (7a) PC-U Girder Nominal Span of 28.5m, H= 1.85m (Type D), furnished Buah 0.004 0.002 - 0.841 - 0.003 0.850
10.03 (7b) PC-U Girder Nominal Span of 28.5m, H= 1.85m (Type D), erected Buah 0.157 0.236 - - - 0.457 0.850
10.03 (8a) PC-U Girder Nominal Span of 31m, H= 1.85m (Type E), furnished Buah 0.004 0.002 - 0.841 - 0.003 0.850
10.03 (8b) PC-U Girder Nominal Span of 31m, H= 1.85m (Type E), erected Buah 0.157 0.236 - - - 0.457 0.850
10.03 (9a) PC-U Girder Nominal Span of 31m, H= 1.85m (Type F), furnished Buah 0.004 0.002 - 0.841 - 0.003 0.850
10.03 (9b) PC-U Girder Nominal Span of 31m, H= 1.85m (Type F), erected Buah 0.157 0.236 - - - 0.457 0.850
10.03 (10a) PC-U Girder Nominal Span of 33m, H= 1.85m (Type G), furnished Buah 0.004 0.002 - 0.841 - 0.003 0.850
10.03 (10b) PC-U Girder Nominal Span of 33m, H= 1.85m (Type G), erected Buah 0.157 0.236 - - - 0.457 0.850
10.03 (11a1) PC-Void Slab Nominal Span of 16m, H= 0.85m, furnished Buah 0.004 0.002 - 0.841 - 0.003 0.850
10.03 (11a2) PC-Void Slab Nominal Span of 16m, H= 0.85m, erected Buah 0.157 0.236 - - - 0.457 0.850
10.03 (11b1) PC-Void Slab Nominal Span of 12.8m, H= 0.85m, furnished Buah 0.004 0.002 - 0.841 - 0.003 0.850
10.03 (11b2) PC-Void Slab Nominal Span of 12.8m, H= 0.85m, erected Buah 0.157 0.236 - - - 0.457 0.850
10.03 (12a1) PC-I Girder Nominal Span of 11.50m to 13.00m, H= 0.90m, furnished Buah 0.009 0.013 - 0.816 - 0.012 0.850
10.03 (12a2) PC-I Girder Nominal Span of 11.50m to 13.00m, H= 0.90m, erected Buah 0.128 0.287 - - - 0.435 0.850
10.03 (12b1) PC-I Girder Nominal Span of 13.10m to 14.50m, H= 0.90m, furnished Buah 0.009 0.013 - 0.816 - 0.012 0.850
10.03 (12b2) PC-I Girder Nominal Span of 13.10m to 14.50m, H= 0.90m, erected Buah 0.128 0.287 - - - 0.435 0.850
10.03 (12c1) PC-I Girder Nominal Span of 14.60m to 16.000m, H= 0.90m, furnished Buah 0.009 0.013 - 0.816 - 0.012 0.850
NO. COST COMPONENT FACTORS
PAY PAY ITEM UNIT Labour Fuel Material Equipment TOTAL
ITEM l f m1 m2 m3 e
10.03 (12c2) PC-I Girder Nominal Span of 14.60m to 16.00m, H= 0.90m, erected Buah 0.128 0.287 - - - 0.435 0.850
10.03 (13a1) PC-I Girder Nominal Span of 12.0m to 14.0m, H= 1.40m, furnished Buah 0.009 0.013 - 0.816 - 0.012 0.850
10.03 (13a2) PC-I Girder Nominal Span of 12.0m to 14.0m, H= 1.40m, erected Buah 0.128 0.287 - - - 0.435 0.850
10.03(13b1) PC-I Girder Nominal Span of 14.0m to 15.0m, H= 1.40m, furnished Buah 0.009 0.013 - 0.816 - 0.012 0.850
10.03(13b2) PC-I Girder Nominal Span of 14.0m to 15.0m, H= 1.40m, erected Buah 0.128 0.287 - - - 0.435 0.850
10.03(13c1) PC-I Girder Nominal Span of 15.10m to 17.0m, H= 1.40m, furnished Buah 0.009 0.013 - 0.816 - 0.012 0.850
10.03(13c2) PC-I Girder Nominal Span of 15.10m to 17.0m, H= 1.40m, erected Buah 0.128 0.287 - - - 0.435 0.850
10.03 (13d1) PC-I Girder Nominal Span of 25.00m to 27.0m, H= 1.40m, furnished Buah 0.009 0.013 - 0.816 - 0.012 0.850
10.03 (13d2) PC-I Girder Nominal Span of 25.00m to 27.0m, H= 1.40m, erected Buah 0.128 0.287 - - - 0.435 0.850
10.03 (14a) PC-I Girder Nominal Span of 25.0m to 27.00m, H= 1.60m, furnished Buah 0.009 0.013 - 0.816 - 0.012 0.850
10.03 (14b) PC-I Girder Nominal Span of 25.0m to 27.00m, H= 1.60m, erected Buah 0.128 0.287 - - - 0.435 0.850
10.03 (15a) PC-I Girder Nominal Span of 30.0m to 32.00m, H= 1.70m, furnished Buah 0.009 0.013 - 0.816 - 0.012 0.850
10.03 (15b) PC-I Girder Nominal Span of 30.0m to 32.00m, H= 1.70m, erected Buah 0.128 0.287 - - - 0.435 0.850
10.03 (16a1) PC-I Girder Nominal Span of 20.0m to 22.0m, H= 2.10m, furnished Buah 0.009 0.013 - 0.816 - 0.012 0.850
10.03 (16a2) PC-I Girder Nominal Span of 20.0m to 22.0m, H= 2.10m, erected Buah 0.128 0.287 - - - 0.435 0.850
10.03 (16b1) PC-I Girder Nominal Span of 39.0m to 41.0m, H= 2.10m, furnished Buah 0.009 0.013 - 0.816 - 0.012 0.850
10.03 (16b2) PC-I Girder Nominal Span of 39.0m to 41.0m, H= 2.10m, erected Buah 0.128 0.287 - - - 0.435 0.850
10.03 (17) Prestressing Steel Type A (SWPR7B, T12.7) Kilogram 0.012 0.006 - 0.822 - 0.010 0.850
10.03 (18) Prestressing Steel Type B (SWPR7B, T15.2) Kilogram 0.012 0.006 - 0.822 - 0.010 0.850
10.05 (1) Pretensioned Spun Concrete Pile, Furnished, D = 60cm M 0.012 0.006 - 0.822 - 0.010 0.850
10.05 (2) Pretensioned Spun Concrete Pile, Driven, D = 60cm M 0.128 0.043 - - - 0.679 0.850
10.05 (3) Pretensioned Spun Concrete Pile Test Furnished and Driven, D = 60cm M 0.024 0.010 - 0.740 - 0.077 0.850
10.05 (4) Pretensioned Spun Concrete Pile, Furnished, D = 50cm M 0.012 0.006 - 0.822 - 0.010 0.850
10.05 (5) Pretensioned Spun Concrete Pile, Driven, D = 50cm M 0.128 0.043 - - - 0.679 0.850
10.05 (6) Pretensioned Spun Concrete Pile Test Furnished and Driven, D = 50cm M 0.024 0.010 - 0.740 - 0.077 0.850
10.05 (7) Dynamic Loading Test for Pretensioned Spun Concrete Pile D = 50 - 60cm M 0.043 - - - - 0.807 0.850
10.05 (8) Dynamic Loading Test for Pretensioned Spun Concrete Pile D= 50 - 60cm (2.5 M 0.043 - - - - 0.807 0.850
Times Planning Playload)
10.06 (1) Steel Pile, Furnished. Ton 0.049 0.013 0.069 0.699 - 0.020 0.850
10.06 (2) Steel Pile, Driven, D = 50cm M 0.128 0.043 - - - 0.679 0.850
10.07 (1) Cast-in-Place RC Pile D=80cm with Ultrasonic Monitoring M 0.043 0.199 0.024 0.267 - 0.317 0.850
10.07(2) Cast-in-Place RC Pile D=80cm including Static Loading Test Buah 0.043 0.040 0.005 0.053 - 0.709 0.850
10.07 (3) Dynamic Loading Test for Cast-in-Place RC Pile D=80cm Buah 0.043 - - - - 0.807 0.850
10.07 (4) Ultrasonic Measurement Monitor for Cast-in-Place RC Pile D=80cm Buah 0.043 - - - - 0.807 0.850
10.07 (5) Cast-in-Place RC Pile D=120cm, with Ultrasonic Monitoring M 0.043 0.199 0.024 0.267 - 0.317 0.850
10.07 (6) Cast-in-Place RC Pile D=120cm, including Static Loading Test Buah 0.043 0.040 0.005 0.053 - 0.709 0.850
10.07 (7) Dynamic Loading Test for Cast-in-Place RC Pile D=120cm Buah 0.043 - - - - 0.807 0.850
10.07 (8) Ultrasonic Measurement Monitor for Cast-in-Place RC Pile D=120cm Buah 0.043 - - - - 0.807 0.850
10.09 (1) Bridge Railing M 0.091 0.015 0.009 0.410 0.304 0.021 0.850
10.09 (2) Stair Handrail H = 1.5m M 0.091 0.015 0.009 0.410 0.304 0.021 0.850
10.09 (3) Chainlink Fence, H = 2.6m M 0.091 0.015 0.009 0.410 0.304 0.021 0.850
NO. COST COMPONENT FACTORS
PAY PAY ITEM UNIT Labour Fuel Material Equipment TOTAL
ITEM l f m1 m2 m3 e
10.10 (1) Expansion Joint Type A (Surface Rubber Joint with Load - supporting Type) M 0.019 - 0.706 - - 0.125 0.850
10.10 (2) Expansion Joint Type B (Adhesive Sealant Joint) M 0.019 - 0.706 - - 0.125 0.850
10.10 (3a) Expansion Joint Type C-1 (20mm) M 0.019 - 0.706 - - 0.125 0.850
10.10 (3b) Expansion Joint Type C-1 (50mm) M 0.019 - 0.706 - - 0.125 0.850
10.10 (4) Expansion Joint Type C-2 (Steel Finger Joint 175mm) M 0.019 - 0.706 - - 0.125 0.850
10.10 (5) Expansion Joint Type C-3 (Steel Finger Joint 220mm) M 0.019 - 0.706 - - 0.125 0.850
10.10 (6a) Expansion Joint Type D-1 (Rubberized Bitumen Binder Type 40cm) M 0.019 - 0.706 - - 0.125 0.850
10.10 (6b) Expansion Joint Type D-1 (Rubberized Bitumen Binder Type 30cm) M 0.019 - 0.706 - - 0.125 0.850
10.10 (7) Expansion Joint Type E(Longitudinal Expansion Joint) M 0.019 - 0.706 - - 0.125 0.850
10.11 (1) Elastomeric Bearing Pad 460 x 550 x 75 (Mov.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (2) Elastomeric Bearing Pad 450 x 520 x 75 (Mov.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (3) Elastomeric Bearing Pad 420 x 500 x 75 (Mov.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (4) Elastomeric Bearing Pad 400 x 450 x 75 (Mov.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (5) Elastomeric Bearing Pad 460 x 550 x 49 (Fix) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (6) Elastomeric Bearing Pad 450 x 520 x 49 (Fix) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (7) Elastomeric Bearing Pad 420 x 500 x 49 (Fix) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (8) Elastomeric Bearing Pad 400 x 450 x 49 (Fix) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (9) Elastomeric Bearing Pad 450 x 550 x 83 (Mov.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (10) Elastomeric Bearing Pad 600 x 600 x 83 (Mov.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (11) Elastomeric Bearing Pad 400 x 450 x 83 (Mov.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (12) Elastomeric Bearing Pad 700 x 750 x 48 (Fix) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (13) Elastomeric Bearing Pad 850 x 850 x 52 (Fix) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (14) Elastomeric Bearing Pad 650 x 650 x 52 (Fix) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (15) Elastomeric Bearing Pad 300 x 350 x 36 (Mov.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (16) Elastomeric Bearing Pad 350 x 400 x 40 (Mov.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (17) Elastomeric Bearing Pad 450 x 500 x 60 (Mov.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (18) Elastomeric Bearing Pad 300 x 350 x 36 (Fix.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (19) Elastomeric Bearing Pad 350 x 400 x 40 (Fix.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (20) Elastomeric Bearing Pad 450 x 500 x 60 (Fix.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (21) Elastomeric Bearing Pad 350 x 400 x 52 (Mov.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (22) Elastomeric Bearing Pad 350 x 400 x 52 (Fix.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (22a) Elastomeric Bearing Pad 450 x 400 x 52 (Mov.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (22b) Elastomeric Bearing Pad 450 x 400 x 52 (Fix.) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (23) Elastomeric Bearing Pad for PC Void 100 x 500 x 29 (Fix) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (24) Elastomeric Bearing Pad for PC Void 100 x 500 x 38 (Move) Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (25) Rubber Bearing Sheet 200 x 200 x 20 Buah 0.018 - 0.714 - - 0.118 0.850
10.11 (26) Rubber Bearing Sheet 250x25 M 0.018 - 0.714 - - 0.118 0.850
10.11 (27) Anchor Bar with Accessories Kilogram 0.012 0.006 - 0.822 - 0.010 0.850
10.11 (28) Elastomeric Bearing Shoe for Steel Girder 7,400kN (Fix) Buah 0.060 - 0.665 - - 0.125 0.850
10.11 (29) Elastomeric Bearing Shoe for Steel Girder 8,800kN (Fix) Buah 0.060 - 0.665 - - 0.125 0.850
10.11 (30) Elastomeric Bearing Shoe for Steel Girder 7,200kN (Fix) Buah 0.060 - 0.665 - - 0.125 0.850
10.11 (31) Elastomeric Bearing Shoe for Steel Girder 8,200kN (Fix) Buah 0.060 - 0.665 - - 0.125 0.850
10.11 (32) Elastomeric Bearing Shoe for Steel Girder 4,200kN (Move) Buah 0.060 - 0.665 - - 0.125 0.850
10.11 (33) Elastomeric Bearing Shoe for Steel Girder 4,200kN (Fix) Buah 0.060 - 0.665 - - 0.125 0.850
10.11 (34) Elastomeric Bearing Shoe for Steel Girder 4,000kN (Move) Buah 0.060 - 0.665 - - 0.125 0.850
10.11 (35) Elastomeric Bearing Shoe for Steel Girder 4,000kN (Fix) Buah 0.060 - 0.665 - - 0.125 0.850
10.11 (36) Elastomeric Bearing Shoe for Steel Girder 3,800kN (Move) Buah 0.060 - 0.665 - - 0.125 0.850
10.11 (37) Elastomeric Bearing Shoe for Steel Girder 3,800kN (Fix) Buah 0.060 - 0.665 - - 0.125 0.850
10.11 (38) Elastomeric Bearing Shoe for Steel Girder 3,400kN (Fix) Buah 0.060 - 0.665 - - 0.125 0.850
NO. COST COMPONENT FACTORS
PAY PAY ITEM UNIT Labour Fuel Material Equipment TOTAL
ITEM l f m1 m2 m3 e
10.11 (39) Elastomeric Bearing Shoe for Steel Girder 1,800kN (Move) Buah 0.060 - 0.665 - - 0.125 0.850
10.11 (40) Elastomeric Bearing Shoe for Steel Girder 2,000kN (Move) Buah 0.060 - 0.665 - - 0.125 0.850
10.11 (41) Elastomeric Bearing Shoe for Steel Girder 1,800kN (Fix) Buah 0.060 - 0.665 - - 0.125 0.850
10.11 (42) Elastomeric Bearing Shoe for Steel Girder 4,700kN (Fix) Buah 0.060 - 0.665 - - 0.125 0.850
10.11 (43) Elastomeric Bearing Shoe for Steel Girder 4,700kN (Move) Buah 0.060 - 0.665 - - 0.125 0.850
10.11 (44) Pot Bearing ,1900/220/80 kN Buah 0.060 - 0.665 - - 0.125 0.850
10.12 (1) Drain Pipe D=20cm with Fitting and Supports M 0.128 0.052 - 0.580 - 0.090 0.850
10.12 (2) Drain Pipe D=15cm with Fitting and Supports M 0.128 0.052 - 0.580 - 0.090 0.850
10.12 (3) Deck Drain Type 1 with Accessories Buah 0.128 0.052 - 0.580 - 0.090 0.850
10.12 (4) Deck Drain Type 2 with Accessories Buah 0.128 0.052 - 0.580 - 0.090 0.850
-
10.13 (1) Sheet Pile (H = 6 m), including driven M 0.128 0.051 0.125 0.156 0.178 0.212 0.850
11.01 (1) Furnish Continuous Steel Box Girders Ton 0.056 0.013 - 0.760 - 0.021 0.850
11.01 (2) Erect Continuous Steel Box Girders Ton 0.255 0.085 - - - 0.510 0.850
11.01 (3) Furnish Simple Steel Box Girders Ton 0.056 0.013 - 0.760 - 0.021 0.850
11.01 (4) Erect Simple Steel Box Girders Ton 0.255 0.085 - - - 0.510 0.850
11.01 (5) Furnish Continuous Steel Box Girders with Steel Deck Ton 0.056 0.013 - 0.760 - 0.021 0.850
11.01 (6) Furnish Anchorage of Stay Cable Ton 0.056 0.013 - 0.760 - 0.021 0.850
11.01 (7) Inspection Ladder Ton 0.056 0.013 - 0.760 - 0.021 0.850
SECTION 12 MISCELLANEOUS
12.02 (1) Stone Masonry Type A M2 0.089 0.071 0.233 0.375 - 0.082 0.850
12.02 (2) Stone Masonry Type B M2 0.089 0.071 0.233 0.375 - 0.082 0.850
12.02 (3) Stone Masonry Type C M3 0.089 0.071 0.233 0.375 - 0.082 0.850
12.03 (1) Dry Riprap Slope Protection M2 0.155 - 0.594 - 0.101 - 0.850
12.03 (2) Grouted Riprap M3 0.079 0.076 0.231 0.376 0.088 - 0.850
12.03 (3) Drop Structure M3 0.089 0.071 0.233 0.375 - 0.082 0.850
12.03 (4) Concrete Block Slope Protection M2 0.032 0.033 0.376 0.360 - 0.049 0.850
12.05 (1) Mortared Rubble Type A M 0.038 0.010 0.329 0.458 - 0.015 0.850
12.05 (2) Mortared Rubble Type B M 0.038 0.010 0.329 0.458 - 0.015 0.850
12.05 (3) Mortared Rubble Type C M3 0.038 0.010 0.329 0.458 - 0.015 0.850
12.05 (4) Mortared Rubble DS.4 M3 0.038 0.010 0.329 0.458 - 0.015 0.850
12.05 (5) Mortared Rubble DS.5 M3 0.038 0.010 0.329 0.458 - 0.015 0.850
12.05 (6) Mortared Rubble DV-10 M3 0.038 0.010 0.329 0.458 - 0.015 0.850
12.05 (7) Mortared Rubble for Inlet and Outlet M3 0.038 0.010 0.329 0.458 - 0.015 0.850
NO. COST COMPONENT FACTORS
PAY PAY ITEM UNIT Labour Fuel Material Equipment TOTAL
ITEM l f m1 m2 m3 e
12.06 (1) Vehicle Guardrail Type A M 0.012 0.022 - - 0.784 0.032 0.850
12.06 (2) Vehicle Guardrail Type B M 0.012 0.022 - - 0.784 0.032 0.850
12.06 (3) Vehicle Guardrail Type C M 0.012 0.022 - - 0.784 0.032 0.850
12.06 (4) Separator Fence (Concrete Panel) Type-A M 0.032 0.033 0.376 0.360 - 0.049 0.850
12.06 (5) Separator Fence (Spine Wire) Type-B M 0.024 0.014 - 0.790 - 0.022 0.850
12.06 (6) Fence Gate Type-A Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.06 (7) Fence Gate Type-B Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.06 (8) Moveable Fence Type-A Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.06 (9) Moveable Fence Type-B Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.06 (10) BRC Fence Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.06 (11) Guard Rail End Section Buah 0.012 0.022 - - 0.784 0.032 0.850
-
12.07 (1) Regulatory and warning signs type A-1 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.07 (2) Regulatory and warning signs type A-2 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.07 (3) Regulatory and warning signs type B-1 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.07 (4) Regulatory and warning signs type B-2 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.07 (5) Regulatory and warning signs type C-1 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.07 (6) Regulatory and warning signs type C-2 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.07 (7) Regulatory and warning signs type D Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.07 (7a) Regulatory and warning signs type D-2 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.08 (1) Guide Sign Type A-1 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.08 (2) Guide Sign Type A-2 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.08 (3) Guide Sign Type A-3 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.08 (4) Guide Sign Type A-4 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.08 (5) Guide Sign Type A-5 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.08 (6) Guide Sign Type A-6 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.08 (7) Guide Sign Type A-7 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.08 (8) Guide Sign Type B-1 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.08 (9) Guide Sign Type B-2 Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.08 (10) Guide Sign Type C Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.08 (11) Guide Sign Type D Buah 0.024 0.014 - 0.790 - 0.022 0.850
12.09 (1) Road Marking Type A (General Application) M2 0.024 0.014 - 0.395 0.395 0.022 0.850
12.09 (2) Road Marking Type A (Special Application) M2 0.024 0.014 - 0.395 0.395 0.022 0.850
12.09 (3) Road Marking Type B (General Application) M2 0.024 0.014 - 0.395 0.395 0.022 0.850
12.09 (4) Strip Map M2 0.024 0.014 - 0.395 0.395 0.022 0.850
12.10 (1) Delineator Type A Buah 0.024 0.014 - 0.395 0.395 0.022 0.850
12.10 (2) Delineator Type B Buah 0.024 0.014 - 0.395 0.395 0.022 0.850
12.10 (3) Delineator Type C Buah 0.024 0.014 - 0.395 0.395 0.022 0.850
12.12 (1) Concrete Curb Type A M 0.032 0.033 0.376 0.360 - 0.049 0.850
12.12 (2) Concrete Curb Type B M 0.032 0.033 0.376 0.360 - 0.049 0.850
12.12 (3) Concrete Curb Type C M 0.032 0.033 0.376 0.360 - 0.049 0.850
12.12 (4) Concrete Curb Type D M
NO. COST COMPONENT FACTORS
PAY PAY ITEM UNIT Labour Fuel Material Equipment TOTAL
ITEM l f m1 m2 m3 e
12.13 Interlocking Concrete Paving M3 0.032 0.033 0.376 0.360 - 0.049 0.850
12.14 Staircase M 0.012 0.022 - - 0.784 0.032 0.850
12.15 (1) Concrete Barrier Type A M 0.032 0.033 0.376 0.360 - 0.049 0.850
12.15 (2) Concrete Barrier Type B M 0.032 0.033 0.376 0.360 - 0.049 0.850
12.15 (3) Concrete Barrier and Planter Box M3 0.032 0.033 0.376 0.360 - 0.049 0.850
12.16 Bus Stop Shelter Buah 0.032 0.033 0.376 0.360 - 0.049 0.850
12.17 (1) Shrub-Planting for Plantation Box Type 1 Buah 0.200 - - 0.560 - 0.090 0.850
12.17 (2) Shrub-Planting for Plantation Box Type 2 Buah 0.200 - - 0.560 - 0.090 0.850
12.17 (3) Nyamplung (Calophylum Inophyllum) Buah 0.200 - - 0.560 - 0.090 0.850
12.17 (4) Ketapang(Terminallia Cattapa) Buah 0.200 - - 0.560 - 0.090 0.850
12.17 (5) Bungur (Largerslroemia Indica) Buah 0.200 - - 0.560 - 0.090 0.850
12.17 (6) Bintaro (Cerbera Oddlam) Buah 0.200 - - 0.560 - 0.090 0.850
12.17 (7) Waru Laut (Hibiscus Tillaceus) Buah 0.200 - - 0.560 - 0.090 0.850
12.17 (8) Mahoni (Swietania Mahagoni) Buah 0.200 - - 0.560 - 0.090 0.850
12.17 (9) Akasia Daun Lebar Buah 0.200 - - 0.560 - 0.090 0.850
12.17 (10) Biola Cantik Buah 0.200 - - 0.560 - 0.090 0.850
12.17 (11) Butterfly Buah 0.200 - - 0.560 - 0.090 0.850
12.17 (12) Dadap Merah (Erythrina Oristagal) Buah 0.200 - - 0.560 - 0.090 0.850
12.17 (13) Kelapa Sawit (Elais Guineensis) Buah 0.200 - - 0.560 - 0.090 0.850
12.17 (14) Trembesi (Samanea Saman) Buah 0.200 - - 0.560 - 0.090 0.850
12.17 (15) Jati Mas Buah 0.200 - - 0.560 - 0.090 0.850
12.19 (1) Guide Post, Type A Buah 0.024 0.014 - 0.395 0.395 0.022 0.850
12.19 (2) Guide Post, Type B Buah 0.024 0.014 - 0.395 0.395 0.022 0.850
12.19 (3) ROW Post, Type A Buah 0.024 0.014 - 0.395 0.395 0.022 0.850
12.19 (4) ROW Post, Type B Buah 0.024 0.014 - 0.395 0.395 0.022 0.850
12.19 (5) Kilometer Post Buah 0.024 0.014 - 0.395 0.395 0.022 0.850
12.20 (1) ROW fence, Tiype 1 (Concrete Panel) M 0.032 0.033 0.376 0.360 - 0.049 0.850
12.20 (2) ROW fence, Type 2 (Barbed Wire) M 0.024 0.014 - 0.790 - 0.022 0.850
12.20 (3) ROW Fence, Type 3 (BRC) M 0.024 0.014 - 0.790 - 0.022 0.850